Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'stress-strain' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 758 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Jiang, Y; Xu, B
      Deformation analysis of notched components and assessment of approximate methods

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    2. Carter, FJ; Frank, TG; Davies, PJ; McLean, D; Cuschieri, A
      Measurements and modelling of the compliance of human and porcine organs

      MEDICAL IMAGE ANALYSIS
    3. Jia, D; Ramesh, KT; Ma, E; Lu, L; Lu, K
      Compressive behavior of an electrodeposited nanostructured copper at quasistatic and high strain rates

      SCRIPTA MATERIALIA
    4. Hwang, S; Nishimura, C; McCormick, PG
      Deformation mechanism of nanocrystalline magnesium in compression

      SCRIPTA MATERIALIA
    5. Inoue, A; Zhang, T; Ishihara, S; Saida, J; Matsushita, M
      Preparation and mechanical properties of nanoquasicrystalline base bulk alloys

      SCRIPTA MATERIALIA
    6. Peeters, B; Seefeldt, M; Teodosiu, C; Kalidindi, SR; Van Houtte, P; Aernoudt, E
      Work-hardening/softening behaviour of BCC polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an if steel duringtwo-stage strain paths

      ACTA MATERIALIA
    7. Huang, C; Hawbolt, EB; Chen, X; Meadowcroft, TR; Matlock, DK
      Flow stress modeling and warm rolling simulation behavior of two Ti-Nb interstitial-free steels in the ferrite region

      ACTA MATERIALIA
    8. Picornell, C; Pons, J; Cesari, E
      Stabilisation of martensite by applying compressive stress in Cu-Al-Ni single crystals

      ACTA MATERIALIA
    9. Heino, S; Karlsson, B
      Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitic stainless steel-stress-strain relations and fatigue life

      ACTA MATERIALIA
    10. Karaman, I; Sehitoglu, H; Maier, HJ; Chumlyakov, YI
      Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen

      ACTA MATERIALIA
    11. Hommel, M; Kraft, O
      Deformation behavior of thin copper films on deformable substrates

      ACTA MATERIALIA
    12. Kouzeli, M; Weber, L; San Marchi, C; Mortensen, A
      Influence of damage on the tensile behaviour of pure aluminium reinforced with >= 40 vol. pct alumina particles

      ACTA MATERIALIA
    13. Inoue, A; Zhang, W; Zhang, T; Kurosaka, K
      High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternarysystems

      ACTA MATERIALIA
    14. Carlsson, S; Larsson, PL
      On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis

      ACTA MATERIALIA
    15. Carlsson, S; Larsson, PL
      On the determination of residual stress and strain fields by sharp indentation testing. Part II: Experimental investigation

      ACTA MATERIALIA
    16. Flinn, JE; Field, DP; Korth, GE; Lillo, TM; Macheret, J
      The flow stress behavior of OFHC polycrystalline copper

      ACTA MATERIALIA
    17. Dou, YL; Gregersen, S; Zhao, JB; Zhuang, FY; Gregersen, H
      Effect of re-feeding after starvation on biomechanical properties in rat small intestine

      MEDICAL ENGINEERING & PHYSICS
    18. Gefen, A; Chen, J; Elad, D
      Computational tools in rehabilitation of erectile dysfunction

      MEDICAL ENGINEERING & PHYSICS
    19. Boyce, MC; Arruda, EM
      Swelling and mechanical stretching of elastomeric materials

      MATHEMATICS AND MECHANICS OF SOLIDS
    20. Jin, YM; Weng, GJ
      A relaxed-constraint model for the tensile behavior of polycrystal shape-memory alloy wires

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    21. McCulloch, AD; Mazhari, R
      Regional myocardial mechanics: Integrative computational models of flow-function relations

      JOURNAL OF NUCLEAR CARDIOLOGY
    22. Piltner, R; Joseph, DS
      A mixed finite element for plate bending with eight enhanced strain modes

      COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING
    23. Jo, BW; Shon, YH; Kim, YJ
      The evalution of elastic modulus for steel fiber reinforced concrete

      RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING
    24. Viouchkov, Y; Schwartz, J
      Compressive stress-strain-I-c properties of Bi-2223 superconducting tapes

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    25. Kondoh, J; Tateishi, H; Umeda, M; Arai, K; Agatsuma, K; Gotoh, K; Saitoh, T
      Mechanical properties of a niobium-tin superconductor reinforced by tantalum cores

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    26. Pan, VM; Flis, VS; Komashko, VA; Karasevska, OP; Svetchnikov, VL; Lorenz, M; Ivanyuta, AN; Melkov, GA; Pashitskii, EA; Zandbergen, HW
      Linear defects in epitaxial Y-Ba-Cu-O films: Their role in anisotropic vortex pinning and microwave surface resistance

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    27. Pam, HJ; Ho, JCM
      Flexural strength enhancement of confined reinforced concrete columns

      PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS
    28. Nussinovitch, A; Corradini, MG; Normand, MD; Peleg, M
      Effect of starch, sucrose and their combinations on the mechanical and acoustic properties of freeze-dried alginate gels

      FOOD RESEARCH INTERNATIONAL
    29. Skelton, RP; Wee, ST; Webster, GA
      Cyclic stress-strain behaviour of circumferentially notched cylindrical bars at high temperature

      MATERIALS AT HIGH TEMPERATURES
    30. Yue, ZF
      Investigation of the double shear creep specimens to study the creep behaviour of short fibre metal matrix composites

      MATERIALS AT HIGH TEMPERATURES
    31. Hemler, RJB; Wieneke, GH; van Riel, AM; Lebacq, J; Dejonckere, PH
      A new method for measuring mechanical properties of laryngeal mucosa

      EUROPEAN ARCHIVES OF OTO-RHINO-LARYNGOLOGY
    32. Drozdov, AD; Dorfmann, A
      The stress-strain response and ultimate strength of filled elastomers

      COMPUTATIONAL MATERIALS SCIENCE
    33. Lee, WB; Jie, M; Tang, CY
      Constitutive modeling of aluminum matrix NiTi fiber-reinforced smart composite

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    34. Ferreira, JC
      A note on a numerically controlled precision system for sheet metal bending tests

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    35. Gall, K; Sehitoglu, H; Anderson, R; Karaman, I; Chumlyakov, YI; Kireeva, IV
      On the mechanical behavior of single crystal NiTi shape memory alloys and related polycrystalline phenomenon

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    36. Calderon-Moreno, JM
      Stress induced domain switching of PZT in compression tests

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    37. Matsuzawa, M; Fujimagari, E; Horibe, S
      Cyclic deformation and crack growth in zirconia ceramics

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    38. Kohout, J
      A simple relation for deviation of grey and nodular cast irons from Hooke's law

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    39. Ohta, T
      Theory of rubber-like elasticity in shape memory alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    40. Anantakrishna, G; Noronha, SJ; Fressengeas, C; Kubin, LP
      Crossover in the dynamics of Portevin-Le Chatelier effect from chaos to SOC

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    41. Spatig, P; Baluc, N; Victoria, M
      On the constitutive behavior of the F82H ferritic/martensitic steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    42. Enikeev, FU
      On the superplastic flow under non-uniform stress-strain state

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    43. Buque, C; Bretschneider, J; Schwab, A; Holste, C
      Dislocation structures in cyclically deformed nickel polycrystals

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    44. Uchil, J; Mahesh, KK; Kumara, KG
      Calorimetric study of the effect of linear strain on the shape memory properties of Nitinol

      PHYSICA B
    45. Vinogradov, A; Hashimoto, S
      Multiscale phenomena in fatigue of ultra-fine grain materials - an overview

      MATERIALS TRANSACTIONS JIM
    46. Ochiai, S; Kimura, S; Tanaka, M; Hojo, M
      Simulation study on influences of damage-induced mechanical interactions, residual stresses and interfacial frictional shear stress on interfacial debonding in multifilamentary composites

      MATERIALS TRANSACTIONS JIM
    47. Yokoyama, K; Hamada, K; Asaoka, K
      Fracture analysis of hydrogen-charged nickel-titanium superelastic alloy

      MATERIALS TRANSACTIONS JIM
    48. Davies, IJ; Ogasawara, T; Ishikawa, T
      Stress/strain behavior of a 3-D woven composite based on the SiC/SiC system

      JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
    49. Pan, VM; Flis, VS; Karasevska, OP; Matsui, VI; Peshko, II; Svetchnikov, VL; Lorenz, M; Ivanyuta, AN; Melkov, GA; Pashitskii, EA; Zandbergen, HW
      Effect of growth-induced linear defects on high frequency properties of pulse-laser deposited YBa2Cu3O7-delta films

      JOURNAL OF SUPERCONDUCTIVITY
    50. Kog, YC; Ong, KCG; Yu, CH; Sreekanth, APV
      Reinforced concrete jacketing for masonry columns with axial loads

      ACI MATERIALS JOURNAL
    51. Yeh, YK; Mo, YL; Yang, CY
      Seismic performance of hollow circular bridge piers

      ACI STRUCTURAL JOURNAL
    52. Benavente, R; Perez, E; Quijada, R
      Effect of the comonomer content on the mechanical parameters and microhardness values in poly(ethylene-co-1-octadecene) synthesized by a metallocene catalyst

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    53. Li, FK; Larock, RC
      New soybean oil-styrene-divinylbenzene thermosetting copolymers. III. Tensile stress-strain behavior

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    54. Stenberg, N; Fellers, C; Ostlund, S
      Measuring the stress-strain properties of paperboard in the thickness direction

      JOURNAL OF PULP AND PAPER SCIENCE
    55. Yang, H; Sakai, N; Watanabe, M
      Drying model with non-isotropic shrinkage deformation undergoing simultaneous heat and mass transfer

      DRYING TECHNOLOGY
    56. Tabarsa, T; Chui, YH
      Characterizing microscopic behavior of wood under transverse compression. Part II. Effect of species and loading direction

      WOOD AND FIBER SCIENCE
    57. Yoshihara, H; Ohsaki, H; Kubojima, Y; Ohta, M
      Comparisons of shear stress/shear strain relations of wood obtained by Iosipescu and torsion tests

      WOOD AND FIBER SCIENCE
    58. Fujii, K; Yasuda, E; Tanabe, Y
      Dynamic mechanical properties of polycrystalline graphites and a 2D-C/C composite by plate impact

      INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
    59. Francoeur, RB
      Reformulating financial problems and interventions to improve psychosocialand functional outcomes in cancer patients and their families

      JOURNAL OF PSYCHOSOCIAL ONCOLOGY
    60. Assa, B; Nishiyama, M; Watanabe, F
      New approach for modeling confined concrete. I: Circular columns

      JOURNAL OF STRUCTURAL ENGINEERING-ASCE
    61. Assa, B; Nishiyama, M; Watanabe, F
      New approach for modeling confined concrete. II: Rectangular columns

      JOURNAL OF STRUCTURAL ENGINEERING-ASCE
    62. Zhu, JG; Yin, JH
      Deformation and pore-water pressure responses of elastic viscoplastic soil

      JOURNAL OF ENGINEERING MECHANICS-ASCE
    63. Bourdeau, PL
      Stochastic model for time-dependent compression of particulate media

      JOURNAL OF ENGINEERING MECHANICS-ASCE
    64. Okonogi, K; Miyoshi, K; Toda, A
      Defect control of STI process technology

      NEC RESEARCH & DEVELOPMENT
    65. Olemskoi, AI; Krakovsky, I
      Two simple approaches to sol-gel transition

      PHYSICA A
    66. Patane, D; Privitera, E
      Seismicity related to 1989 and 1991-93 Mt. Etna (Italy) eruptions: kinematic constraints by fault plane solution analysis

      JOURNAL OF VOLCANOLOGY AND GEOTHERMAL RESEARCH
    67. Wong, RCK
      Strength of two structured soils in triaxial compression

      INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS
    68. Andrianov, IV; Awrejcewicz, J
      Asymptotic approaches to simplified boundary value problems of non-linear dynamics

      NONLINEAR ANALYSIS-THEORY METHODS & APPLICATIONS
    69. Bischoff, PH
      Effects of shrinkage on tension stiffening and cracking in reinforced concrete

      CANADIAN JOURNAL OF CIVIL ENGINEERING
    70. Peng, X; Qin, Y; Balendra, R
      Finite element investigation into the torsion test in the range of large strains and deformations

      JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
    71. Korstgens, V; Flemming, HC; Wingender, J; Borchard, W
      Influence of calcium ions on the mechanical properties of a model biofilm of mucoid Pseudomonas aeruginosa

      WATER SCIENCE AND TECHNOLOGY
    72. Fleury, E; Ha, JS
      Thermomechanical fatigue behaviour of nickel base superalloy IN738LC Part I - Comparison of two unified constitutive models for description of mechanical behaviour

      MATERIALS SCIENCE AND TECHNOLOGY
    73. Gouadec, G; Karlin, S; Wu, J; Parlier, M; Colomban, P
      Physical chemistry and mechanical imaging of ceramic-fibre-reinforced ceramic- or metal-matrix composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    74. Plaisantin, H; Pailler, R; Guette, A; Daude, G; Petraud, M; Barbe, B; Birot, M; Pillot, JP; Olry, P
      Conversion of cellulosic fibres into carbon fibres: a study of the mechanical properties and correlation with chemical structure

      COMPOSITES SCIENCE AND TECHNOLOGY
    75. Chun, HJ; Shin, JY; Daniel, IM
      Effects of material and geometric nonlinearities on the tensile and compressive behavior of composite materials with fiber waviness

      COMPOSITES SCIENCE AND TECHNOLOGY
    76. Gassan, J; Dietz, T
      Fatigue behavior of cross-ply glass-fiber composites based on epoxy resinsof different toughnesses

      COMPOSITES SCIENCE AND TECHNOLOGY
    77. Toutanji, H; Saafi, M
      Durability studies on concrete columns encased in PVC-FRP composite tubes

      COMPOSITE STRUCTURES
    78. de Simone, G; McClelland, R; Gottdiener, JS; Celentano, A; Kronmal, RA; Gardin, JM
      Relation of hemodynamics and risk factors to ventricular-vascular interactions in the elderly: the Cardiovascular Health Study

      JOURNAL OF HYPERTENSION
    79. Zhong, D; Mustoe, GGW; Moore, JJ; Disam, J
      Finite element analysis of a coating architecture for glass-molding dies

      SURFACE & COATINGS TECHNOLOGY
    80. Bouzakis, KD; Michailidis, N; Hadjiyiannis, S; Pavlidou, E; Erkens, G
      An effective way to improve the cutting performance of coated tools through annealing

      SURFACE & COATINGS TECHNOLOGY
    81. Bouzakis, KD; Michailidis, N; Erkens, G
      Thin hard coatings stress-strain curve determination through a FEM supported evaluation of nanoindentation test results

      SURFACE & COATINGS TECHNOLOGY
    82. Ma, DP; Ma, N; Chen, JR
      Theoretical calculations of strain-induced splittings and/or shifts of t(2)(3) E-2 and t(2)(3) (4)A(2) levels for MgO : Cr3+

      COMMUNICATIONS IN THEORETICAL PHYSICS
    83. Savaidis, A; Savaidis, G; Zhang, C
      Elastic-plastic FE analysis of a notched shaft under multiaxial nonproportional synchronous cyclic loading

      THEORETICAL AND APPLIED FRACTURE MECHANICS
    84. Xu, Q
      Creep damage constitutive equations for multi-axial states of stress for 0.5Cr0.5Mo0.25V ferritic steel at 590 degrees C

      THEORETICAL AND APPLIED FRACTURE MECHANICS
    85. Marar, K; Eren, O; Celik, T
      Relationship between impact energy and compression toughness energy of high-strength fiber-reinforced concrete

      MATERIALS LETTERS
    86. Bobet, A
      Influence of the loading apparatus on the stresses within biaxial specimens

      GEOTECHNICAL TESTING JOURNAL
    87. Torro-Palau, AM; Fernandez-Garcia, JC; Orgiles-Barcelo, AC; Martin-Martinez, JM
      Characterization of polyurethanes containing different silicas

      INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
    88. Mano, JF; Viana, JC
      Effects of the strain rate and temperature in stress-strain tests: study of the glass transition of a polyamide-6

      POLYMER TESTING
    89. Michaeli, W; Glissmann, M
      Concept for the numerical description of the true stress/strain behaviour of semi-crystalline thermoplastics

      POLYMER TESTING
    90. Tang, CY; Peng, LH; Li, CC; Shen, W; Tsui, CP
      Experimental study on stable growth of crack and craze damage in HIPS under tension at room temperature

      POLYMER TESTING
    91. Schoeler, K; Christ, HJ
      Influence of prestraining on cyclic deformation behaviour and microstructure of a single-phase Ni-base superalloy

      INTERNATIONAL JOURNAL OF FATIGUE
    92. Plumtree, A; Abdel-Raouf, HA
      Cyclic stress-strain response and substructure

      INTERNATIONAL JOURNAL OF FATIGUE
    93. Buque, C
      Persistent slip bands in cyclically deformed nickel polycrystals

      INTERNATIONAL JOURNAL OF FATIGUE
    94. Savaidis, A; Savaidis, G; Zhang, C
      FE fatigue analysis of notched elastic-plastic shaft under multiaxial loading consisting of constant and cyclic components

      INTERNATIONAL JOURNAL OF FATIGUE
    95. Yao, WX; Ye, B; Zheng, LC
      A verification of the assumption of anti-fatigue design

      INTERNATIONAL JOURNAL OF FATIGUE
    96. Shang, DG; Wang, DK; Li, M; Yao, WX
      Local stress-strain field intensity approach to fatigue life prediction under random cyclic loading

      INTERNATIONAL JOURNAL OF FATIGUE
    97. Susantha, KAS; Ge, HB; Usami, T
      Uniaxial stress-strain relationship of concrete confined by various shapedsteel tubes

      ENGINEERING STRUCTURES
    98. Huang, W; Delgado-West, D; Wu, JT; Fung, YC
      Tissue remodeling of rat pulmonary artery in hypoxic breathing. II. Courseof change of mechanical properties

      ANNALS OF BIOMEDICAL ENGINEERING
    99. Ichinose, K; Fukuda, K; Gomi, K; Taniuchi, K; Sano, M
      Yield strength in relation to cyclic loading

      JOURNAL OF TESTING AND EVALUATION
    100. Isobe, N; Oshima, S; Taniguchi, K; Hoshizaki, H; Adachi, H; Toyama, T; Naito, S; Nogami, A; Sugawara, M
      Electrocardiographic ST-segment elevation and changes in the regional workof the left ventricle during coronary angioplasty

      JAPANESE CIRCULATION JOURNAL-ENGLISH EDITION


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 08/08/20 alle ore 18:14:29