Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'residual stress' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 1076 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Wu, YQ; Zhang, YF; Pezzotti, G; Guo, JK
      Effect of glass additives on the strength and toughness of polycrystallinealumina

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    2. Turton, TJ; White, JR
      Degradation depth profiles and fracture of UV exposed polycarbonate

      PLASTICS RUBBER AND COMPOSITES
    3. Munsi, ASMY; Waddell, AJ; Walker, CA
      The effect of vibratory stress on the welding microstructure and residual stress distribution

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    4. Mlekusch, B
      Calculation of residual stress development in injection moulding using a nonlinear viscoelastic model

      MECHANICS OF TIME-DEPENDENT MATERIALS
    5. Leoni, M; Welzel, U; Lamparter, P; Mittemeijer, EJ; Kamminga, JD
      Diffraction analysis of internal strain-stress fields in textured, transversely isotropic thin films: theoretical basis and simulation

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    6. Tseng, KH; Chou, CP
      Effect of pulsed gas tungsten arc welding on angular distortion in austenitic stainless steel weldments

      SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
    7. Cohen, D; Mantell, SC; Zhao, LY
      The effect of fiber volume fraction on filament wound composite pressure vessel strength

      COMPOSITES PART B-ENGINEERING
    8. Li, S
      General unit cells for micromechanical analyses of unidirectional composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    9. Svanberg, JM; Holmberg, JA
      An experimental investigation on mechanisms for manufacturing induced shape distortions in homogeneous and balanced laminates

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    10. Roy, R; Sarkar, BK; Bose, NR
      Impact fatigue of glass fibre-vinylester resin composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    11. Chandra, N; Ghonem, H
      Interfacial mechanics of push-out tests: theory and experiments

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    12. Garmestani, H; Al-Haik, M; Townsley, TA; Sabinash, C
      Residual stress development during fabrication and processing of gamma-titanium based composites

      SCRIPTA MATERIALIA
    13. Thompson, JA; Clyne, TW
      The effect of heat treatment on the stiffness of zirconia top coats in plasma-sprayed TBCs

      ACTA MATERIALIA
    14. Wu, H; Roberts, SG; Derby, B
      Residual stress and subsurface damage in machined alumina and alumina/silicon carbide nanocomposite ceramics

      ACTA MATERIALIA
    15. Zhang, W; Subhash, G
      Finite element analysis of interacting Vickers indentations on brittle materials

      ACTA MATERIALIA
    16. Carlsson, S; Larsson, PL
      On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis

      ACTA MATERIALIA
    17. Carlsson, S; Larsson, PL
      On the determination of residual stress and strain fields by sharp indentation testing. Part II: Experimental investigation

      ACTA MATERIALIA
    18. Matejicek, J; Sampath, S
      Intrinsic residual stresses in single splats produced by thermal spray processes

      ACTA MATERIALIA
    19. Chen, CK; Lin, CY
      Failure analysis of brass rotor bars

      ENGINEERING FAILURE ANALYSIS
    20. Jha, AK; Arumugham, S
      Metallographic analysis of embedded crack in electron beam welded austenitic stainless steel chemical storage tank

      ENGINEERING FAILURE ANALYSIS
    21. Tait, RB; Press, J
      An experimental study of the residual stresses, and their alleviation, in tube to tube-sheet welds of industrial boilers

      ENGINEERING FAILURE ANALYSIS
    22. Chang, SY; Kim, YK; Hong, SK; Shin, DH
      Effect of heat treatment on tensile properties of component with macro-interface between unreinforced magnesium and composite

      MATERIALS TRANSACTIONS
    23. Moriyama, M; Nagano, T; Kawagoishi, N; Takaki, S; Nagashima, E
      Effect of shot peening on fatigue strength of 18%Ni maraging steel

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    24. Kruger, JK; Baller, J; le Coutre, A; Manglkammer, W; Britz, T; Hartmann, U; Alnot, P; Remy, M; Henkel, M
      A versatile method to characterize the mechanical and opticla properties of nano-and micro-structured CVD-diamond : Brillouin microscopy

      VIDE-SCIENCE TECHNIQUE ET APPLICATIONS
    25. Chai, YS; Choi, BS; Yang, KJ
      Improved modeling of the effects of thermal residual stresses on single fiber pull-out problem

      KSME INTERNATIONAL JOURNAL
    26. Chandran, KB; Mun, JH; Chen, JS; Nagaraj, A; McPherson, DD
      Effect of residual stress on femoral arterial stress-strain behavior

      KSME INTERNATIONAL JOURNAL
    27. Kim, C; Yang, WH; Heo, SP
      Influence of inclined holes in measurement of residual stress by the hole drilling method

      KSME INTERNATIONAL JOURNAL
    28. Clausen, B; Bourke, MAM
      Lattice plane response during tensile loading of an aluminum 2 percent magnesium alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    29. Savarimuthu, AC; Taber, HF; Megat, I; Shadley, JR; Rybicki, EF; Cornell, WC; Emery, WA; Somerville, DA; Nuse, JD
      Sliding wear behavior of tungsten carbide thermal spray coatings for replacement of chromium electroplate in aircraft applications

      JOURNAL OF THERMAL SPRAY TECHNOLOGY
    30. Kuroda, S; Tashiro, Y; Yumoto, H; Taira, S; Fukanuma, H; Tobe, S
      Peening action and residual stresses in high-velocity oxygen fuel thermal spraying of 316L stainless steel

      JOURNAL OF THERMAL SPRAY TECHNOLOGY
    31. Hoshide, T; Abe, J
      Grinding-induced residual stress estimation by indentation-fracture methodin ground silicon nitrides

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    32. Grum, J; Sturm, R
      Residual stress state after the laser surface remelting process

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    33. Cappelletti, RL; Glinka, CJ; Krueger, S; Lindstrom, RA; Lynn, JW; Prask, HJ; Prince, E; Rush, JJ; Rowe, JM; Satija, SK; Toby, BH; Tsai, A; Udovic, TJ
      Materials research with neutrons at NIST

      JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
    34. Widjaja, S
      Determination of creep-induced residual stress in fiber-reinforced glass-ceramic matrix composites by X-ray diffraction

      MATERIALS CHARACTERIZATION
    35. Kahlen, FJ; Kar, A
      Residual stresses in laser-deposited metal parts

      JOURNAL OF LASER APPLICATIONS
    36. Kim, TH; Olver, AV; Pearson, PK
      Fatigue and fracture mechanisms in large rolling element bearings

      TRIBOLOGY TRANSACTIONS
    37. Kuo, MK; Lee, HT
      Inversion of residual stress

      CHINESE JOURNAL OF MECHANICS-SERIES A
    38. Clauer, AH; Lahrman, DF
      Laser shock processing as a surface enhancement process

      DURABLE SURFACES
    39. He, LF; Kobayashi, S
      Acoustoelastic determination of residual stress in welded plate by use of laser doppler velocimeter

      PROGRESS IN NATURAL SCIENCE
    40. Li, ZQ; Hong, Y; Zhang, SY; Zhang, ZN; Shui, XJ
      Depth profiling and thermal relaxation of residual stress in Al2O3f/SAE321composites observed by SEAM

      PROGRESS IN NATURAL SCIENCE
    41. Qian, ML; Pan, YD; Xu, WJ; Duqennoy, M; Ourak, M
      Determination of stress distribution in an aluminum alloy by laser ultrasonics

      PROGRESS IN NATURAL SCIENCE
    42. Wong, KM; Shen, YG; Wong, PL
      Tribological properties of sputtered tungsten and tungsten nitride thin films

      SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY
    43. Carrado, A; Fiori, F; Girardin, E; Pirling, T; Powell, P; Rustichelli, F
      Neutron diffraction measurements of residual stresses in metal matrix composite samples

      RADIATION PHYSICS AND CHEMISTRY
    44. Dhar, A; Clapham, L; Atherton, DL
      Influence of uniaxial plastic deformation on magnetic Barkhausen noise in steel

      NDT & E INTERNATIONAL
    45. Lindgren, M; Lepisto, T
      Effect of prestraining on Barkhausen noise vs. stress relation

      NDT & E INTERNATIONAL
    46. Tomaszewski, H; Boniecki, M; Weglarz, H
      Effect of grain size and residual stresses on R-curve behaviour of aluminabased composites

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    47. Zeng, Y; Ding, CX; Lee, SW
      Young's modulus and residual stress of plasma-sprayed boron carbide coatings

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    48. Hidayetoglu, TK
      Effect of the gear finishing process on bending fatigue crack initiation and propagation in spur gears

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    49. Schmauder, S; Weber, U
      Modelling of functionally graded materials by numerical homogenization

      ARCHIVE OF APPLIED MECHANICS
    50. Kohn, E; Adamschik, M; Schmid, P; Ertl, S; Floter, A
      Diamond electro-mechanical micro devices - technology and performance

      DIAMOND AND RELATED MATERIALS
    51. Lemoine, P; Zhao, JF; Bell, A; Maguire, P; McLaughlin, J
      Intrinsic stress measured on ultra-thin amorphous carbon films deposited on AFM cantilevers

      DIAMOND AND RELATED MATERIALS
    52. Hu, HH; Lin, HY; Fang, WL; Chou, BCS
      The diagnostic micromachined beams on (111) substrate

      SENSORS AND ACTUATORS A-PHYSICAL
    53. Zhang, X; Chen, KS; Ghodssi, R; Ayon, AA; Spearing, SM
      Residual stress and fracture in thick tetraethylorthosilicate (TEOS) and silane-based PECVD oxide films

      SENSORS AND ACTUATORS A-PHYSICAL
    54. Grum, J
      A review of the influence of grinding conditions on resulting residual stresses after induction surface hardening and grinding

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    55. Choi, HZ; Lee, SW; Jeong, HD
      A comparison of the cooling effects of compressed cold air and coolant forcylindrical grinding with a CBN wheel

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    56. Kruszynski, BW; Wojcik, R
      Residual stress in grinding

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    57. Li, XB; Zou, HM; Pan, J
      A study of interfacial residual stress field in a K2O center dot 6TiO(2w)/Al composite by LACBED and 3-D finite element method

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    58. Lin, YC; Chen, PY
      Effect of nitrogen content and retained ferrite on the residual stress in austenitic stainless steel weldments

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    59. Tsay, LW; Liu, CC; Chao, YH; Shieh, YH
      Fatigue crack propagation in 2.25 Cr-1.0Mo steel weldments in air and hydrogen

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    60. Rangaswamy, P; Scherer, CP; Bourke, MAM
      Experimental measurements and numerical simulation of stress and microstructure in carburized 5120 steel disks

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    61. Yang, JM; Her, YC; Han, NL; Clauer, A
      Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    62. Daymond, MR
      The blurring in strains measured at a pulsed neutron source introduced by the use of a detector with a large angular coverage

      PHYSICA B
    63. Ochiai, S; Kimura, S; Tanaka, M; Hojo, M
      Simulation study on influences of damage-induced mechanical interactions, residual stresses and interfacial frictional shear stress on interfacial debonding in multifilamentary composites

      MATERIALS TRANSACTIONS JIM
    64. Wang, KH; Blunt, L; Mao, LT; Chao, CC; Stout, KJ
      The effects of operational parameters on surface characteristics of the ballised material

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    65. Chung, H; Jang, WB; Hwang, J; Han, H
      Analysis of dimensionally stable copolyimide with a low-level residual stress

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    66. Bull, SJ; Sharkeev, YP; Fortuna, SV; Shulepov, IA; Perry, AJ
      Mechanism of improvement of TiN-coated tool life by nitrogen implantation

      JOURNAL OF MATERIALS RESEARCH
    67. Huang, YS; Chen, SS; Lin, TP; Chen, YS
      Growth stress distribution in leaning trunks of Cryptomeria japonica

      TREE PHYSIOLOGY
    68. Bruzzi, MS; McHugh, PE; O'Rourke, F; Linder, T
      Micromechanical modelling of the static and cyclic loading of an Al2124-SiC MMC

      INTERNATIONAL JOURNAL OF PLASTICITY
    69. Shin, TJ; Lee, B; Youn, HS; Lee, KB; Ree, M
      Time-resolved synchrotron X-ray diffraction and infrared spectroscopic studies of imidization and structural evolution in a microscaled film of PMDA-3,4 '-ODA poly(amic acid)

      LANGMUIR
    70. Cheng, WH; Sheen, MT; Wang, GL; Wang, SC; Kuang, JH
      Fiber alignment shift formation mechanisms of fiber-solder-ferrule joints in laser module packaging

      JOURNAL OF LIGHTWAVE TECHNOLOGY
    71. Ikeda, T; Sun, CT
      Stress intensity factor analysis for an interface crack between dissimilarisotropic materials under thermal stress

      INTERNATIONAL JOURNAL OF FRACTURE
    72. Wineman, A
      Torsion of an elastomeric cylinder undergoing microstructural changes

      JOURNAL OF ELASTICITY
    73. Lu, X; Zhao, JB; Wang, GR; Gregersen, H; Kassab, GS
      Remodeling of the zero-stress state of femoral arteries in response to flow overload

      AMERICAN JOURNAL OF PHYSIOLOGY-HEART AND CIRCULATORY PHYSIOLOGY
    74. Munsi, ASMY; Waddell, AJ; Walker, CA
      Vibratory stress relief - an investigation of the torsional stress effect in welded shafts

      JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
    75. Webster, PJ; Oosterkamp, LD; Browne, PA; Hughes, DJ; Kang, WP; Withers, PJ; Vaughan, GBM
      Synchrotron X-ray residual strain scanning of a friction stir weld

      JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
    76. Han, B; Post, D; Ifju, P
      Moire interferometry for engineering mechanics: current practices and future developments

      JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
    77. Kwon, O; Pathiraj, B; Nikbin, KM
      Effects of residual stress in creep crack growth analysis of cold bent tubes under internal pressure

      INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    78. Bouchard, PJ; Goldthorpe, MR; Prottey, P
      J-integral and local damage fracture analyses for a pump casing containinglarge weld repairs

      INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    79. Lidbury, DPG; Bass, BR; Bhandari, S; Sherry, AH
      Key features arising from structural analysis of the NESC-1 PTS benchmark experiment

      INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    80. Li, M; Zhu, Q; Geubelle, PH; Tucker, CL
      Optimal curing for thermoset matrix composites: Thermochemical considerations

      POLYMER COMPOSITES
    81. Treglio, JR; Dennin, TB; Moore, JJ; Misra, B; Perry, AJ
      Advanced Plasma Surface Modification System for high energy metal ion beamassisted deposition

      SURFACE ENGINEERING
    82. Niezgoda, T
      Material database optimization using Monte Carlo method in engineering application

      PROBABILISTIC ENGINEERING MECHANICS
    83. Mezzenga, R; Boogh, L; Manson, JAE
      A review of dendritic hyperbranched polymer as modifiers in epoxy composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    84. Gouadec, G; Karlin, S; Wu, J; Parlier, M; Colomban, P
      Physical chemistry and mechanical imaging of ceramic-fibre-reinforced ceramic- or metal-matrix composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    85. Perreux, D; Lazuardi, D
      The effects of residual stress on the non-linear behaviour of composite laminates Part I. Experimental results and residual-stress assessments

      COMPOSITES SCIENCE AND TECHNOLOGY
    86. Perreux, D; Lazuardi, D
      The effect of residual stress on the non-linear behaviour of composite laminates Part II. Layer, laminate non-linear models and the effect of residual stress on the model parameters

      COMPOSITES SCIENCE AND TECHNOLOGY
    87. Sayman, O; Ozer, MR
      Elastic-plastic thermal stress analysis of aluminum-martix composite beamsunder a parabolically temperature distribution

      COMPOSITES SCIENCE AND TECHNOLOGY
    88. Bektas, NB; Sayman, O
      Elasto-plastic stress analysis in simply supported thermoplastic laminatedplates under thermal loads

      COMPOSITES SCIENCE AND TECHNOLOGY
    89. Choo, H; Bourke, MAM; Daymond, MR
      A finite-element analysis of the inelastic relaxation of thermal residual stress in continuous-fiber-reinforced composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    90. Banerjee, D; Rho, H; Jackson, HE; Singh, RN
      Characterization of residual stresses in a sapphire-fiber-reinforced glass-matrix composite by micro-fluorescence spectroscopy

      COMPOSITES SCIENCE AND TECHNOLOGY
    91. Karakuzu, R; Atas, C; Akbulut, H
      Elastic-plastic behavior of woven-steel-fiber-reinforced thermoplastic laminated plates under in-plane loading

      COMPOSITES SCIENCE AND TECHNOLOGY
    92. Fiedler, B; Hojo, M; Ochiai, S; Schulte, K; Ochi, M
      Finite-element modeling of initial matrix failure in CFRP under static transverse tensile load

      COMPOSITES SCIENCE AND TECHNOLOGY
    93. Stokes, J; Looney, L
      HVOF system definition to maximise the thickness of formed components

      SURFACE & COATINGS TECHNOLOGY
    94. Sohn, YH; Vaidyanathan, K; Ronski, M; Jordan, EH; Gell, M
      Thermal cycling of EB-PVD/MCrAlY thermal barrier coatings: II. Evolution of photo-stimulated luminescence

      SURFACE & COATINGS TECHNOLOGY
    95. Huang, F; Wei, GH; Barnard, JA; Weaver, ML
      Microstructure and stress development in magnetron sputtered TiAlCr(N) films

      SURFACE & COATINGS TECHNOLOGY
    96. Nam, KH; Jung, YM; Han, JG
      A comparative study of microstructure and mechanical properties for CrNx films with various deposition rates by magnetron sputtering

      SURFACE & COATINGS TECHNOLOGY
    97. Ma, S; Xu, K; He, J
      Parametric effects of residual stress in pulsed d.c. plasma enhanced CVD TiN coatings

      SURFACE & COATINGS TECHNOLOGY
    98. Tonshoff, HK; Seegers, H
      X-Ray diffraction characterization of pre-treated cemented carbides for optimizing adhesion strength of sputtered hard coatings

      SURFACE & COATINGS TECHNOLOGY
    99. Liu, C; Leyland, A; Bi, Q; Matthews, A
      Corrosion resistance of multi-layered plasma-assisted physical vapour deposition TiN and CrN coatings

      SURFACE & COATINGS TECHNOLOGY
    100. Chen, LQ; Miao, JM; Guo, LH; Lin, RM
      Control of stress in highly doped polysilicon multi-layer diaphragm structure

      SURFACE & COATINGS TECHNOLOGY


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 07/08/20 alle ore 07:23:57