Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'machining' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 1005 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Lin, JL; Lin, CL
      The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    2. Deng, JX; Lee, T
      Effect of ultrasonic surface finishing on the strength and thermal shock behavior of the EDMed ceramic composite

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    3. Li, HZ; Li, XP
      Milling force prediction using a dynamic shear length model

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    4. Gu, SX; Ni, J; Yuan, JX
      Non-stationary signal analysis and transient machining process condition monitoring

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    5. Cenna, AA; Mathew, P
      Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    6. Kim, BH; Choi, BK
      Machining efficiency comparison direction-parallel tool path with contour-parallel tool path

      COMPUTER-AIDED DESIGN
    7. Tam, HY; Xu, HY; Zhou, Z
      Iso-planar interpolation for the machining of implicit surfaces

      COMPUTER-AIDED DESIGN
    8. Kim, YS; Wang, E
      Recognition of machining features for cast then machined parts

      COMPUTER-AIDED DESIGN
    9. Erickson, NR
      High performance dual directional couplers for near-mm wavelengths

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    10. O'Brien, DM; Piacitelli, GM; Sieber, WK; Hughes, RT; Catalano, JD
      An evaluation of short-term exposures to metalworking fluids in small machine shops

      AIHAJ
    11. Piacitelli, GM; Sieber, WK; O'Brien, DM; Hughes, RT; Glaser, RA; Catalano, JD
      Metalworking fluid exposures in small machine shops: an overview

      AIHAJ
    12. Iyengar, M; Bar-Cohen, A
      Design for manufacturability of SISE parallel plate forced convection heatsinks

      IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    13. Malki, A; Bachelot, R; Van Lauwe, F
      Two-step process for micro-lens-fibre fabrication using a continuous CO2 laser source

      JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS
    14. Davies, MA; Burns, TJ
      Thermomechanical oscillations in material flow during high-speed machining

      PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
    15. Degischer, HP; Prader, P; San Marchi, C
      "Assessment of Metal Matrix Composites for Innovations" - intermediate report of a European Thematic Network

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    16. Hirogaki, T; Aoyama, E; Inoue, H; Ogawa, K; Maeda, S; Katayama, T
      Laser drilling of blind via holes in aramid and glass/epoxy composites formulti-layer printed wiring boards

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    17. Prakash, U; Sauthoff, G
      Machinable iron aluminides containing carbon

      SCRIPTA MATERIALIA
    18. Cao, YQ
      Failure analysis of exit edges in ceramic machining using finite element analysis

      ENGINEERING FAILURE ANALYSIS
    19. Warisawa, S; Kida, A; Ito, Y
      Visualization of water jet cutting by means of ultrasonic waves

      JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING
    20. Iseki, H
      Flexible and incremental bulging of sheet metal using high-speed water jet

      JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING
    21. Ashida, K; Morita, N; Yoshida, Y
      Study on nano-machining process using mechanism of a friction force microscope

      JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING
    22. Kim, CH; Kruth, JP
      Influence of the electrical conductivity of dielectric on WEDM of sinteredcarbide

      KSME INTERNATIONAL JOURNAL
    23. Park, E; Tilbury, DM; Khargonekar, PP
      A modeling and analysis methodology for modular logic controllers of machining systems using Petri net formalism

      IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART C-APPLICATIONS AND REVIEWS
    24. Jain, VK; Ranganatha, C; Muralidhar, K
      Evaluation of rheological properties of medium for AFM process

      MACHINING SCIENCE AND TECHNOLOGY
    25. Yin, L; Ives, LK; Jahanmir, S; Rekow, ED; Romberg, E
      Abrasive machining of glass-infiltrated alumina with diamond burs

      MACHINING SCIENCE AND TECHNOLOGY
    26. Sangnui, S; Peters, F
      The impact of surface errors on the location and orientation of a cylindrical workpiece in a fixture

      JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
    27. Han, JW; Han, IH; Lee, E; Ti, J
      Manufacturing feature recognition toward integration with process planning

      IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART B-CYBERNETICS
    28. Park, RM
      Medical insurance claims and surveillance for occupational disease: Analysis of respiratory, cardiac, and cancer outcomes in auto industry tool grinding operations

      JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL MEDICINE
    29. Lee, JY; Kim, H; Kim, K
      A web-enabled approach to feature-based modeling in a distributed and collaborative design environment

      CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS
    30. de Lacalle, LNL; Gutierrez, A; Lamikiz, A; Fernandes, MH; Sanchez, JA
      Turning of thick thermal spray coatings

      JOURNAL OF THERMAL SPRAY TECHNOLOGY
    31. Modest, MF
      Minimization of elastic thermal stresses during laser machining of ceramics using a dual-beam arrangement

      JOURNAL OF LASER APPLICATIONS
    32. Kim, J; Park, FC; Ryu, SJ; Kim, J; Hwang, JC; Park, C; Iurascu, CC
      Design and analysis of a redundantly actuated parallel mechanism for rapidmachining

      IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION
    33. Tanaka, H; Shimada, S; Ikawa, N; Yoshinaga, M
      Wear mechanism of diamond cutting tool in machining of steel

      PRECISION MACHINING OF ADVANCED MATERIALS
    34. Maekawa, K; Kubo, A; Childs, THC
      A friction model for free-machining steels and its applicability to machinability analysis

      PRECISION MACHINING OF ADVANCED MATERIALS
    35. Kuriyagawa, T; Sakuyama, T; Syoji, K; Onodera, H
      A new device of abrasive jet machining and application to abrasive jet printer

      PRECISION MACHINING OF ADVANCED MATERIALS
    36. Yang, CT; Ho, SS; Yan, BH
      Micro hole machining of borosilicate glass through electrochemical discharge machining (ECDM)

      PRECISION MACHINING OF ADVANCED MATERIALS
    37. Chang, KH; Tang, PS
      Integration of design and manufacturing for structural shape optimization

      ADVANCES IN ENGINEERING SOFTWARE
    38. Wang, M; Fei, RY
      On-line chatter detection and control in boring based on an electrorheological fluid

      MECHATRONICS
    39. Keung, KW; Ip, WH; Lee, TC
      A genetic algorithm approach to the multiple machine tool selection problem

      JOURNAL OF INTELLIGENT MANUFACTURING
    40. Chen, FC
      On the structural configuration synthesis and geometry of machining centres

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    41. de Lacalle, LNL; Lamikiz, A; Sanchez, JA; Cabanes, I
      Cutting conditions and tool optimization in the high-speed milling of aluminium alloys

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    42. Monies, F; Rubio, W; Redonnet, JM; Lagarrigue, P
      Comparative study of interference caused by different position settings ofa conical milling cutter on a ruled surface

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    43. O'Neill, W; Voglsanger, M; Elboughey, A; Steen, WM
      On the selective removal of steel by laser-assisted vortex machining

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    44. Vafaeesefat, A; ElMaraghy, HA
      Rough pocketing of multi-sculptured surface cavities

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    45. Ackroyd, B; Akcan, NS; Chhabra, P; Krishnamurthy, K; Madhavan, V; Chandrasekar, S; Compton, WD; Farris, TN
      Exploration of contact conditions in machining

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    46. Ozbayrak, M; De Souza, RBR; Bell, R
      Design of a tool management system for a flexible machining facility

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    47. Prickett, PW; Johns, C
      The development of an on-line milling cutter tooth breakage detection system

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    48. Yeo, SH; Goh, KM
      The effect of ultrasound in micro electro discharge machining on surface roughness

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    49. Onwubolu, GC; Kumalo, T
      Multi-pass turning operations optimization based on genetic algorithms

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    50. Wang, YQ; Jia, YZ; Jiang, WW
      Early failure analysis of machining centers: a case study

      RELIABILITY ENGINEERING & SYSTEM SAFETY
    51. Dai, Y; Jia, YZ
      Reliability of a VMC and its improvement

      RELIABILITY ENGINEERING & SYSTEM SAFETY
    52. Davidson, J; Kang, W; Holmes, K; Wisitsora-At, A; Taylor, P; Pulugurta, V; Venkatasubramanian, R; Wells, F
      CVD diamond for components and emitters

      DIAMOND AND RELATED MATERIALS
    53. Jaramillo, JM; Mansano, RD; Zambom, LS; Massi, M; Maciel, HS
      Wet etching of hydrogenated amorphous carbon films

      DIAMOND AND RELATED MATERIALS
    54. Ko, JS; Liu, WG; Zhu, WG
      Substrate effects on the properties of the pyroelectric thin film IR detectors

      SENSORS AND ACTUATORS A-PHYSICAL
    55. Lee, YC; Kuo, SH
      Miniature conical transducer realized by excimer laser micro-machining technique

      SENSORS AND ACTUATORS A-PHYSICAL
    56. Li, XX; Lin, RM; Kek, H; Miao, JM; Zou, QB
      Sensitivity-improved silicon condenser microphone with a novel single deeply corrugated diaphragm

      SENSORS AND ACTUATORS A-PHYSICAL
    57. Song, X; Reynaerts, D; Meeusen, W; Van Brussel, H
      A study on the elimination of micro-cracks in a sparked silicon surface

      SENSORS AND ACTUATORS A-PHYSICAL
    58. Ye, XY; Tang, F; Ding, HQ; Zhou, ZY
      Study of a vaporizing water micro-thruster

      SENSORS AND ACTUATORS A-PHYSICAL
    59. Tsai, KN; Wang, PJ
      Comparisons of neural network models on material removal rate in electrical discharge machining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    60. Maity, KP; Das, NS
      A class of slipline field solutions for metal machining with Coulomb friction at the chip-tool interface

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    61. Hong, SY; Ding, Y
      Micro-temperature manipulation in cryogenic machining of low carbon steel

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    62. Heath, PJ
      Developments in applications of PCD tooling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    63. Rahman, M; Kumar, AS; Prakash, JRS
      Micro milling of pure copper

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    64. Ren, BY; Tang, YY; Chen, CK
      The general geometrical models of the design and 2-axis NC machining of a helical end-mill with constant pitch

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    65. Lee, SH; Li, XP
      Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    66. Lin, YC; Yan, BH; Huang, FY
      Surface modification of Al-Zn-Mg aluminum alloy using the combined processof EDM with USM

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    67. Tabacaru, V; Oancea, N
      Numerical modelling of the generation of active surfaces of deep drawing dies

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    68. Wang, PJ; Tsai, KM
      Semi-empirical model on work removal and tool wear in electrical dischargemachining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    69. Yang, MY; Ryu, SG
      Development of a composite suitable for rapid prototype machining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    70. Bhattacharyya, B; Doloi, B; Sridhar, PS
      Electrochemical micro-machining: new possibilities for micro-manufacturing

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    71. Kang, MC; Kim, JS; Kim, JH
      A monitoring technique using a multi-sensor in high speed machining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    72. Hassan, AI; Kosmol, J
      Dynamic elastic-plastic analysis of 3D deformation in abrasive waterjet machining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    73. Ning, Y; Rahman, M; Wong, YS
      Investigation of chip formation in high speed end milling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    74. Li, L; Wong, YS; Fuh, JYH; Lu, L
      Effect of TiC in copper-tungsten electrodes on EDM performance

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    75. Kurita, T; Ono, T; Nakai, T
      A study of processed area monitoring using the strength of YAG laser processing sound

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    76. Davim, JP; Antonio, CAC
      Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    77. Iseki, H
      An approximate deformation, analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    78. Kim, SW; Lee, DW; Kang, MC; Kim, JS
      Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    79. Kuzman, K; Nardin, B; Kovac, M; Jurkosek, B
      The integration of rapid prototyping and CAE in mould manufacturing

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    80. Lin, CB; Hung, YW; Liu, WC; Kang, SW
      Machining and fluidity of 356Al/SiC(p) composites

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    81. Rennie, AEW; Bocking, CE; Bennett, GR
      Electroforming of rapid prototyping mandrels for electro-discharge machining electrodes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    82. Ruszaj, A; Zybura-Skrabalak, M
      The mathematical modelling of electrochemical machining with flat ended universal electrodes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    83. Hewidy, MS; Ebeid, SJ; Rajurkar, KP; El-Safti, MF
      Electrochemical machining under orbital motion conditions

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    84. Domanowski, P; Kozak, J
      Inverse problems of shaping by electrochemical generating machining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    85. Kozak, J
      Computer simulation system for electrochemical shaping

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    86. Kozak, J; Oczos, KE
      Selected problems of abrasive hybrid machining

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    87. Rozenek, M; Kozak, J; Dabrowski, L; Lubkowski, K
      Electrical discharge machining characteristics of metal matrix composites

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    88. Nowicki, B; Pierzynowski, R; Spadlo, S
      New possibilities of machining and electrodischarge alloying of free-form surfaces

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    89. D'Errico, GE
      Fuzzy control systems with application to machining processes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    90. Ferreira, JR; Coppini, NL; Neto, FL
      Characteristics of carbon-carbon composite turning

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    91. Kopac, J
      Hardening phenomena of Mn-austenite steels in the cutting process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    92. Clifton, D; Mount, AR; Jardine, DJ; Roth, R
      Electrochemical machining of gamma titanium aluminide intermetallics

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    93. Sun, JJ; Taylor, EJ; Srinivasan, R
      MREF-ECM process for hard passive materials surface finishing

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    94. Yan, J; Yoshino, M; Kuriagawa, T; Shirakashi, T; Syoji, K; Komanduri, R
      On the ductile machining of silicon for micro electro-mechanical systems (MEMS), opto-electronic and optical applications

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    95. Grieco, A; Semeraro, Q; Tolio, T
      A review of different approaches to the FMS loading problem

      INTERNATIONAL JOURNAL OF FLEXIBLE MANUFACTURING SYSTEMS
    96. De Almeida, D; Kellert, P
      A workload data aggregation process for flexible manufacturing system modeling using queueing network models

      INTERNATIONAL JOURNAL OF FLEXIBLE MANUFACTURING SYSTEMS
    97. Echeverria, MD; Moncada, OJ; Sikora, JA
      Influence of the dimensional change, and its dispersion, on the fabrication size tolerances of austempered ductile iron (ADI) parts: Comparison with SAE 4140 steel

      ISIJ INTERNATIONAL
    98. Nakamura, T
      Tribology and environmental measures in cutting

      JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS
    99. Yokogawa, M
      Tribology and environmental measures in abrasive machining

      JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS
    100. Wang, J
      Development of a chip flow model for turning operations

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 27/05/20 alle ore 02:56:20