Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'lumber' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 286 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Chuang, ST; Wang, SY
      Evaluation of standing tree quality of Japanese cedar grown with differentspacing using stress-wave and ultrasonic-wave methods

      JOURNAL OF WOOD SCIENCE
    2. Zhu, JJ; Kudo, A; Takeda, T; Tokumoto, M
      Methods to estimate the length effect on tensile strength parallel to the grain in Japanese larch

      JOURNAL OF WOOD SCIENCE
    3. Subyakto, B; Hata, T; Ide, I; Kawai, S
      Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting

      JOURNAL OF WOOD SCIENCE
    4. Nugroho, N; Ando, N
      Development of structural composite products made from bamboo II: fundamental properties of laminated bamboo lumber

      JOURNAL OF WOOD SCIENCE
    5. Benkirane, H; Benslimane, R; Hachmi, M; Sesbou, A
      Possible automatic cork quality control by artificial vision

      ANNALS OF FOREST SCIENCE
    6. Wang, XG; Kim, CKH
      Improved control of pneumatic lumber-handling systems

      IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY
    7. Drummond, I; Kermani, A; Wamuziri, SC
      Reliability of timber structural systems: a review

      PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS
    8. Carroll, DR; Stone, RB; Sirignano, AM; Saindon, RM; Gose, SC; Friedman, MA
      Structural properties of recycled plastic/sawdust lumber decking planks

      RESOURCES CONSERVATION AND RECYCLING
    9. Ledig, SF; Nijdam, JJ; Keey, RB
      Airflow distributions in the fillet spaces of a timber stack

      DRYING TECHNOLOGY
    10. Koumoutsakos, A; Avramidis, S; Hatzikiriakos, SG
      Radio frequency vacuum drying of wood. II. Experimental model evaluation

      DRYING TECHNOLOGY
    11. Haque, MN; Langrish, TAG
      Stack-wide effects in the modeling of solar kilns for drying timber

      DRYING TECHNOLOGY
    12. Buehlmann, U; Thomas, RE
      Lumber yield optimization software validation and performance review

      ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
    13. Lee, JN; Tang, RC; Kaiserlik, J
      Nondestructive evaluation of modulus of elasticity of yellow-poplar LVL: Effect of veneer-joint design and relative humidity

      WOOD AND FIBER SCIENCE
    14. Wang, XP; Ross, RJ; McClellan, M; Barbour, RJ; Erickson, JR; Forsman, JW; McGinnis, GD
      Nondestructive evaluation of standing trees with a stress wave method

      WOOD AND FIBER SCIENCE
    15. Janowiak, JJ; Hindman, DP; Manbeck, HB
      Orthotropic behavior of lumber composite materials

      WOOD AND FIBER SCIENCE
    16. Donald, WS; Maness, TC; Marinescu, MV
      Production planning for integrated primary and secondary lumber manufacturing

      WOOD AND FIBER SCIENCE
    17. Bao, FC; Fu, F; Choong, ET; Hse, CY
      Contribution factor of wood properties of three poplar clones to strength of laminated veneer lumber

      WOOD AND FIBER SCIENCE
    18. Ayarkwa, J; Hirashima, Y; Ando, K; Sasaki, Y
      Monitoring acoustic emissions to predict modulus of rupture of finger-joints from tropical African hardwoods

      WOOD AND FIBER SCIENCE
    19. Lemieux, H; Beaudoin, M; Zhang, SY
      Characterization and modeling of knots in black spruce (Picea mariana) logs

      WOOD AND FIBER SCIENCE
    20. Bumgardner, MS; Bush, RJ; West, CD
      Product development in large furniture companies: A descriptive model withimplications for character-marked products

      WOOD AND FIBER SCIENCE
    21. Ra, JB; Barnes, HM; Conners, TE
      Determination of boron diffusion coefficients in wood

      WOOD AND FIBER SCIENCE
    22. Clouston, PL; Lam, F
      Computational modeling of strand-based wood composites

      JOURNAL OF ENGINEERING MECHANICS-ASCE
    23. Forsberg, D; Warensjo, M
      Grain angle variation: A major determinant of twist in sawn Picea abies (L.) Karst

      SCANDINAVIAN JOURNAL OF FOREST RESEARCH
    24. Felker, P; Lopez, C; Soulier, C; Ochoa, J; Abdala, R; Ewens, M
      Genetic evaluation of Prosopis alba (algarrobo) in Argentina for cloning elite trees

      AGROFORESTRY SYSTEMS
    25. Stanton, J; Olson, DK; Brock, JH; Gordon, RS
      The environmental and economic feasibility of alternative crops in arid areas: considering mesquite in Baja California, Mexico

      JOURNAL OF ARID ENVIRONMENTS
    26. Mallon, J; Chu, MT; Maibach, HI
      Occupational allergic contact dermatitis from methyl chloroform (1,1,1-trichloroethane)?

      CONTACT DERMATITIS
    27. Foley, C
      A three-dimensional paradigm of fiber orientation in timber

      WOOD SCIENCE AND TECHNOLOGY
    28. Bao, FC; Jiang, ZH; Jiang, XM; Lu, XX; Luo, XQ; Zhang, SY
      Differences in wood properties between juvenile wood and mature wood in 10species grown in China

      WOOD SCIENCE AND TECHNOLOGY
    29. Payne, CJ; Woodward, S; Petty, JA
      Wettability of Sitka spruce timber stored in a Scottish sawmill yard

      WOOD SCIENCE AND TECHNOLOGY
    30. Brown, CJ; Eaton, RA
      Toxicity of chromated copper arsenate (CCA)-treated wood to non-target marine fouling communities in Langstone Harbour, Portsmouth, UK

      MARINE POLLUTION BULLETIN
    31. Ido, H; Okuma, M; Oda, K
      Evaluation of shear properties of framework wall construction composed of curved LVLs I. Fundamental mechanical properties of curved LVLs and framework panels composed of curved LVLs

      MOKUZAI GAKKAISHI
    32. Kawai, Y; Kobayashi, Y; Norimoto, M
      Hybrid drying with high-frequency and hot air under atmospheric pressure

      MOKUZAI GAKKAISHI
    33. Johansson, M; Perstorper, M; Kliger, R; Johansson, G
      Distortion of Norway spruce timber Part 2. Modelling twist

      HOLZ ALS ROH-UND WERKSTOFF
    34. Eastin, IL; Fukuda, J
      The impact of regulatory change on the international competitiveness of the Canadian softwood lumber industry

      FORESTRY CHRONICLE
    35. Fang, F; Ruddick, JNR; Avramidis, S
      Application of radio-frequency heating to utility poles. Part 2. Accelerated fixation of chromated copper arsenate

      FOREST PRODUCTS JOURNAL
    36. Damery, DT; Fisette, P
      Decision making in the purchase of siding: A survey of architects, contractors, and homeowners in the US northeast

      FOREST PRODUCTS JOURNAL
    37. Fang, F; Ruddick, JNR; Avramidis, S
      Application of radio-frequency heating to utility poles. Part 1. Radio-frequency/vacuum drying of roundwood

      FOREST PRODUCTS JOURNAL
    38. Payne, C; Woodward, S; Petty, JA
      Modification of the growth habit of the softwood disfiguring fungus Ophiostoma piceae by monoterpene vapors

      FOREST PRODUCTS JOURNAL
    39. Forbes, CL; Jahn, LG; Araman, PA
      An investigation of hardwood plywood markets. Part 2. Fixture manufacturers

      FOREST PRODUCTS JOURNAL
    40. Forbes, CL; Jahn, LG; Araman, PA
      An investigation of hardwood plywood markets. Part 1. Architectural woodworkers

      FOREST PRODUCTS JOURNAL
    41. Wang, XP; Ross, RJ; Erickson, JR; Forsman, JW; McGinnis, GD; De Groot, RC
      Nondestructive evaluation of potential quality of creosote-treated piles removed from service

      FOREST PRODUCTS JOURNAL
    42. Khouadja, A; Barnes, HM
      Treatment and redrying of western hemlock plywood

      FOREST PRODUCTS JOURNAL
    43. Ayarkwa, J; Hirashima, Y; Sasaki, Y
      Predicting modulus of rupture of solid and finger-jointed tropical Africanhardwoods using longitudinal vibration

      FOREST PRODUCTS JOURNAL
    44. Demers, PA; Teschke, K; Davies, HW; Kennedy, SM; Leung, V
      Exposure to dust, resin acids, and monoterpenes in softwood lumber mills

      AIHAJ
    45. Takeda, T; Hashizume, T
      Effective sampling method for estimating bending strength distribution of Japanese larch square-sawn timber

      JOURNAL OF WOOD SCIENCE
    46. Lee, JJ; Kim, GC
      Study on the estimation of the strength properties of structural glued laminated timber I: determination of optimum MOE as input variable

      JOURNAL OF WOOD SCIENCE
    47. Hanhijarvi, A
      Computational method for predicting the long-term performance of timber beams in variable climates

      MATERIALS AND STRUCTURES
    48. Bohnhoff, DR; Moody, RC
      Bending properties of laminated-lumber girders

      APPLIED ENGINEERING IN AGRICULTURE
    49. Pordage, LJ; Langrish, TAG
      Optimisation of hardwood drying schedules allowing for biological variability

      DRYING TECHNOLOGY
    50. Rice, RW
      Measurements of delayed warp in eastern spruce studs

      DRYING TECHNOLOGY
    51. Nijdam, JJ; Keey, RB
      The influence of kiln geometry on flow maldistribution across timber stacks in kilns

      DRYING TECHNOLOGY
    52. Fuller, J
      Material response-based kiln control system

      DRYING TECHNOLOGY
    53. Fuller, J
      Determining the source of changing shrinkage rates during kiln drying

      DRYING TECHNOLOGY
    54. Davids, WG; Dagher, HJ; Breton, JM
      Modeling creep deformations of FRP-reinforced glulam beams

      WOOD AND FIBER SCIENCE
    55. Gerhards, CC
      Bending creep and load duration of Douglas-fir 2 by 4s under constant loadfor up to 12-plus years

      WOOD AND FIBER SCIENCE
    56. Schmoldt, DL; He, J; Abbott, AL
      Automated labeling of log features in CT imagery of multiple hardwood species

      WOOD AND FIBER SCIENCE
    57. Lemieux, H; Beaudoin, M; Grondin, F
      A model for the sawing and grading of lumber according to knots

      WOOD AND FIBER SCIENCE
    58. Cramer, SM; Drozdek, JM; Wolfe, RW
      Load sharing effects in light-frame wood-truss assemblies

      JOURNAL OF STRUCTURAL ENGINEERING-ASCE
    59. Lieberman, IH; Willsher, PC; Litwin, DEM; Salo, PT; Kraetschmer, BG
      Transperitoneal laparoscopic exposure for lumbar interbody fusion

      SPINE
    60. Hockey, B; Lam, F; Prion, HGL
      Truss plate reinforced bolted connections in parallel strand lumber

      CANADIAN JOURNAL OF CIVIL ENGINEERING
    61. Lam, F
      Length effect on the tensile strength of truss chord members

      CANADIAN JOURNAL OF CIVIL ENGINEERING
    62. Jappinen, A; Beauregard, R
      Comparing grade classification criteria for automatic sorting of Norway spruce saw logs

      SCANDINAVIAN JOURNAL OF FOREST RESEARCH
    63. Geesing, D; Felker, P; Bingham, RL
      Influence of mesquite (Prosopis glandulosa) on soil nitrogen and carbon development: Implications for global carbon sequestration

      JOURNAL OF ARID ENVIRONMENTS
    64. Gautier, A; Lamond, BF; Pare, D; Rouleau, F
      The Quebec Ministry of Natural Resources uses linear programming to understand the wood-fiber market

      INTERFACES
    65. Hart, S; Arnold, M; Day, R
      The business of sustainable forestry: Meshing operations with strategic purpose

      INTERFACES
    66. de Melo, JE; Pellicane, PJ; de Souza, MR
      Goodness-of-fit analysis on wood properties data from six Brazilian tropical hardwoods

      WOOD SCIENCE AND TECHNOLOGY
    67. Roos, A; Flinkman, M; Jappinen, A; Warensjo, M
      Adoption of value-adding processes in Swedish sawmills

      SILVA FENNICA
    68. Kobayashi, Y; Kawai, Y; Miura, I
      Hybrid drying with high-frequency heating and hot air under atmospheric pressure I. Condition of pressure and moisture in Cryptomeria japonica squarelumber

      MOKUZAI GAKKAISHI
    69. Wada, H; Masuda, K; Kawasaki, E; Ishitani, K
      Strength properties of composite laminated wood composed of Z-S treated steel and sugi (Cryptomeria japonica) finger-jointed lumber - Effect of composition upon strength by arranging Z-S treated steel and lamina in compositelaminated wood

      MOKUZAI GAKKAISHI
    70. Morabito, R; Arenales, M
      Optimizing the cutting of stock plates in a furniture company

      INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
    71. Payne, C; Bruce, A; Staines, HY
      Yeast and bacteria as biological control agents against fungal discolouration of Pinus sylvestris blocks in laboratory-based tests and the role of antifungal volatiles

      HOLZFORSCHUNG
    72. Raczkowski, J; Olek, W; Guzenda, R
      Moisture evaporation rates from sapwood and heartwood samples of Douglas fir (Pseudotsuga menziesii Franco) green wood

      HOLZ ALS ROH-UND WERKSTOFF
    73. Hapla, F; Oliver-Villanueva, JV; Gonzalez-Molina, JM
      Effect of silvicultural management on wood quality and timber utilisation of Cedrus atlantica in the European mediterranean area

      HOLZ ALS ROH-UND WERKSTOFF
    74. Baardsen, S
      An econometric analysis of Norwegian sawmilling 1974-1991 based on mill-level data

      FOREST SCIENCE
    75. Floyd, SL; Kutscha, NP
      Development of softwood plantation timber in the United States

      FOREST PRODUCTS JOURNAL
    76. Carino, HF; Biblis, EJ
      Comparative analysis of the quality of sawlogs from 35-, 40-, and 50-year-old loblolly pine plantation stands

      FOREST PRODUCTS JOURNAL
    77. Ayarkwa, J; Hirashima, Y; Sasaki, Y
      Effect of finger geometry and end pressure on the flexural properties of finger-jointed tropical African hardwoods

      FOREST PRODUCTS JOURNAL
    78. Ayarkwa, J; Hirashima, Y; Sasaki, Y; Ando, K
      Effect of glue type on flexural and tensile properties of finger-jointed tropical African hardwoods

      FOREST PRODUCTS JOURNAL
    79. Prestemon, JP; Holmes, TP
      Timber price dynamics following a natural catastrophe

      AMERICAN JOURNAL OF AGRICULTURAL ECONOMICS
    80. Middleton, G; Munro, D; Dai, CP; Morris, P; Lum, C; Williams, D; Watson, P; Gee, W; Johal, S; Reath, S; Yuen, B; Hussein, A
      Second-growth western hemlock product yields and attributes related to stand density

      SUSTAINABLE PRODUCTION OF FOREST PRODUCTS 2000, PROCEEDINGS
    81. Wang, SY; Wang, HL
      Effects of moisture content and specific gravity on static bending properties and hardness of six wood species

      JOURNAL OF WOOD SCIENCE
    82. Nolin, LP; Lam, F
      Fatigue behaviour and size effect perpendicular to the grain of laminated Douglas fir veneer

      MATERIALS AND STRUCTURES
    83. Pham, DT; Alcock, RJ
      Automated visual inspection of wood boards: selection of features for defect classification by a neural network

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
    84. Bhandarkar, SM; Faust, TD; Tang, MJ
      CATALOG: a system for detection and rendering of internal log defects using computer tomography

      MACHINE VISION AND APPLICATIONS
    85. Lehne, M; Barton, GW; Langrish, TAG
      Comparison of experimental and modelling studies for the microwave drying of Ironbark timber

      DRYING TECHNOLOGY
    86. De Vore, JB; Denny, GS; Harper, TS
      A commercially viable solar wood drying kiln system

      DRYING TECHNOLOGY
    87. Beauregard, R; Gazo, R; Kimberley, MO; Turner, J; Mitchell, S; Shelbourne, A
      Clonal variation ln the quality of radiata pine random width boards

      WOOD AND FIBER SCIENCE
    88. Wisdom, HW
      The welfare effects of trade liberalization

      WOOD AND FIBER SCIENCE
    89. Biblis, EJ; Carino, HF
      Flexural properties of lumber from a 50-year-old loblolly pine plantation

      WOOD AND FIBER SCIENCE
    90. Weinfurter, S; Hansen, EN
      Softwood lumber quality requirements: Examining the supplier/buyer perception gap

      WOOD AND FIBER SCIENCE
    91. Rosowsky, DV; Reinhold, TA
      Rate-of-load and duration-of-load effects for wood fasteners

      JOURNAL OF STRUCTURAL ENGINEERING-ASCE
    92. Felker, P
      An investment-based approach to Prosopis agroforestry in arid lands

      ANNALS OF ARID ZONE
    93. Donceel, P; Du Bois, M; Lahaye, D
      Return to work after surgery for lumbar disc herniation - A rehabilitation-oriented approach in insurance medicine

      SPINE
    94. Hayter, R; Edgington, DW
      'Getting tough' and 'getting smart': politics of the North American - Japan wood-products trade

      ENVIRONMENT AND PLANNING C-GOVERNMENT AND POLICY
    95. Saarela, KE; Harju, L; Lill, JO; Rajander, J; Lindroos, A; Heselius, SJ
      Thick-target PIXE analysis of chromium, copper and arsenic impregnated lumber

      NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
    96. Noguchi, E; Ohsawa, H; Kobayashi, S; Shimura, M; Uchida, S; Sato, Y
      The effect of electro-acupuncture stimulation on the muscle blood flow of the hindlimb in anesthetized rats

      JOURNAL OF THE AUTONOMIC NERVOUS SYSTEM
    97. Todoroki, CL; Ronnqvist, EM
      Combined primary and secondary log breakdown optimisation

      JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY
    98. Epstein, R; Morales, R; Seron, J; Weintraub, A
      Use of OR systems in the Chilean forest industries

      INTERFACES
    99. Fletcher, LR; Alden, H; Holmen, SP; Angelides, DP; Etzenhouser, MJ
      Long-term forest ecosystem planning at pacific lumber

      INTERFACES
    100. Hukka, A; Viitanen, HA
      A mathematical model of mould growth on wooden material

      WOOD SCIENCE AND TECHNOLOGY


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 26/05/20 alle ore 08:09:03