Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'induction heating' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 83 riferimenti
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Sakagami, T; Kubo, S
      Development of a new crack identification technique based on near-tip singular electrothermal field measured by lock-in infrared thermography

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    2. Sinder, M; Pelleg, J; Meerovich, V; Sokolovsky, V
      RF heating of the conductor film on silicon substrate for thin film formation

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    3. Rybak, ME; Salin, ED
      Development and characterization of induction heating-electrothermal vaporization (IH-ETV) sample introduction for inductively coupled plasma spectrometry

      SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
    4. Vyse, R; Henderson, B; Makinen, T
      Enhancing gloss and caliper profiles on coated grade soft nip calendars - An external induction energy system can help enhance MD gloss levels

      PULP & PAPER-CANADA
    5. Shenkman, A; Axelrod, B; Chudnovsky, V
      Assuring continuous input current using a smoothing reactor in a thyristorfrequency converter for induction metal melting and heating applications

      IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
    6. Skopek, M; Ulrych, B; Dolezel, N
      Optimized regime of induction heating of a disk before its pressing on shaft

      IEEE TRANSACTIONS ON MAGNETICS
    7. Wang, ZM; Yang, XG; Wang, YH; Yan, WL
      Eddy current and temperature field computation in transverse flux induction heating equipment for galvanizing line

      IEEE TRANSACTIONS ON MAGNETICS
    8. Nerg, J; Partanen, J
      A simplified FEM based calculation model for 3-D induction heating problems using surface impedance formulations

      IEEE TRANSACTIONS ON MAGNETICS
    9. Rybak, ME; Salin, ED
      Direct determination of metals in soils and sediments by induction heating-electrothermal vaporization (IH-ETV) inductively coupled plasma-optical emission spectrometry (ICP-OES)

      APPLIED SPECTROSCOPY
    10. Hayashi, S; Kano, E; Hatashita, M; Ohtsubo, T; Katayama, K; Matsumoto, H
      Fundamental aspects of hyperthermia on cellular and molecular levels

      THERMOTHERAPY FOR NEOPLASIA INFLAMMATION, AND PAIN
    11. Akiyama, M; Tsubouchi, K; Hori, H
      A study of the reinforcement technology used to improve the life of mandrel bars used in seamless tube manufacturing by mandrel mill rolling

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    12. Rudolf, R; Mitschang, P; Neitzel, M
      Induction heating of continuous carbon-fibre-reinforced thermoplastics

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    13. Jung, HK; Kang, CG; Moon, YH
      Induction heating of semisolid billet and control of globular microstructure to prevent coarsening phenomena

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    14. Jung, HK
      The induction heating process of semi-solid aluminium alloys for thixoforming and their microstructure evaluation

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    15. Hu, Z
      Elasto-plastic solutions for spring-back angle of pipe bending using localinduction heating

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    16. Ko, DC; Min, GS; Kim, BM; Choi, JC
      Finite element analysis for the semi-solid state forming of aluminium alloy considering induction heating

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    17. Gunal, OG; Islam, MR
      Alteration of asphaltic crude rheology with electromagnetic and ultrasonicirradiation

      JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
    18. Takaki, S; Abiko, K
      Ultra-purification of electrolytic iron by cold-crucible induction meltingand induction-heating floating-zone melting in ultra-high vacuum

      MATERIALS TRANSACTIONS JIM
    19. Forest, F; Laboure, E; Costa, F; Gaspard, JY
      Principle of a multi-load/single converter system for low power induction heating

      IEEE TRANSACTIONS ON POWER ELECTRONICS
    20. Dorland, P; van Wyk, JD; Stielau, OH
      On the influence of coil design and electromagnetic configuration on the efficiency of an induction melting furnace

      IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
    21. Wu, R; Xie, CS; Xia, H; Hu, JH; Wang, AH
      The thermal physical formation of ZnO nanoparticles and their morphology

      JOURNAL OF CRYSTAL GROWTH
    22. Nerg, J; Partanen, J
      Numerical solution of 2D and 3D induction heating problems with non-linearmaterial properties taken into account

      IEEE TRANSACTIONS ON MAGNETICS
    23. Oka, H; Fujita, H; Seki, K
      Composition and heating efficiency of magnetic wood by induction heating

      IEEE TRANSACTIONS ON MAGNETICS
    24. Horii, M; Takahashi, N; Narita, T
      Investigation of evolution strategy and optimization of induction heating model

      IEEE TRANSACTIONS ON MAGNETICS
    25. Kwak, IG; Hahn, SY
      Design sensitivity of transient electro-thermal problems for the specific temperature distribution

      IEEE TRANSACTIONS ON MAGNETICS
    26. Trichet, D; Chauveau, E; Fouladgar, J
      Asymptotic calculation of equivalent electromagnetic and thermal properties for composite materials

      IEEE TRANSACTIONS ON MAGNETICS
    27. Byun, JK; Choi, K; Roh, HS; Hahn, SY
      Optimal design procedure for a practical induction heating cooker

      IEEE TRANSACTIONS ON MAGNETICS
    28. Kawase, Y; Miyatake, T; Hirata, K
      Thermal analysis of steel blade quenching by induction heating

      IEEE TRANSACTIONS ON MAGNETICS
    29. Fireteanu, V; Tudorache, T
      Electromagnetic forces in transverse flux induction heating

      IEEE TRANSACTIONS ON MAGNETICS
    30. Hu, Z; Li, JQ
      Computer simulation of pipe-bending processes with small bending radius using local induction heating

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    31. Choi, JC; Park, HJ; Kim, BM
      The influence of induction heating on the microstructure of A356 for semi-solid forging

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    32. Polman, EA; Der Kinderen, JM; Thuis, FMA
      Novel compact steam reformer for fuel cells with heat generation by catalytic combustion augmented by induction heating

      CATALYSIS TODAY
    33. Shinkai, M; Yanase, M; Suzuki, M; Honda, H; Wakabayashi, T; Yoshida, J; Kobayashi, T
      Intracellular hyperthermia for cancer using magnetite cationic liposomes

      JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
    34. Brashear, DR; Zevenbergen, LA
      Preparation of enriched rare-earth metals by hydrofluorination and reduction

      NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
    35. Marcus, C; Zevenbergen, LA
      The reduction and distillation of isotopically enriched zinc oxides under high vacuum conditions

      NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
    36. Hu, Y; Jha, KN; Chakma, A
      Heavy-oil recovery from thin pay zones by electromagnetic heating

      ENERGY SOURCES
    37. Abe, Y; Sassa, K; Kuwabara, M; Asai, S
      Mathematical modeling of skull and pool formation in high-frequency induction skull melting

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    38. Oka, H; Fujita, H
      Heating characteristics of magnetic wood by induction heating

      IEEE TRANSACTIONS ON MAGNETICS
    39. Lupi, S; Forzan, M; Dughiero, F
      Comparison of edge-effects of transverse flux and travelling wave induction heating inductors

      IEEE TRANSACTIONS ON MAGNETICS
    40. Nerg, J; Tolsa, K; Silventoinen, P; Partanen, J; Pyrhonen, J
      A dynamic model for the simulation of induction heating devices

      IEEE TRANSACTIONS ON MAGNETICS
    41. Mai, W; Henneberger, G
      Prediction of the eddy-current and temperature distribution in a TFIH device using neural networks in order to improve the convergence of the finite element calculations

      IEEE TRANSACTIONS ON MAGNETICS
    42. Mai, W; Henneberger, G
      Field and temperature calculations in transverse flux inductive heating devices heating non-paramagnetic materials using surface impedance formulations for non-linear eddy-current problems

      IEEE TRANSACTIONS ON MAGNETICS
    43. Bauer, T; Henneberger, G
      Three-dimensional calculation and optimization of the acoustic field of aninduction furnace caused by electromagnetic forces

      IEEE TRANSACTIONS ON MAGNETICS
    44. Wang, Z; Huang, W; Jia, W; Zhao, Q; Wang, Y; Yan, W; Schulze, D; Martin, G; Luedtke, U
      3D multifields FEM computation of transverse flux induction heating for moving-strips

      IEEE TRANSACTIONS ON MAGNETICS
    45. Enokizono, M; Todaka, T; Nishimura, S
      Finite element analysis of high-frequency induction heating problems considering inhomogeneous flow of exciting currents

      IEEE TRANSACTIONS ON MAGNETICS
    46. Gustrau, F; Bahr, A; Rittweger, M; Goltz, S; Eggert, S
      Simulation of induced current densities in the human body at industrial induction heating frequencies

      IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY
    47. Mousty, C; Foti, G; Comninellis, C; Reid, V
      Electrochemical behaviour of DSA type electrodes prepared by induction heating

      ELECTROCHIMICA ACTA
    48. VIROONCHATAPAN E; SATO H; UENO M; ADACHI I; MURATA J; SAIKI I; TAZAWA K; HORIKOSHI I
      MICRODIALYSIS ASSESSMENT OF 5-FLUOROURACIL RELEASE FROM THERMOSENSITIVE MAGNETOLIPOSOMES INDUCED BY AN ELECTROMAGNETIC-FIELD IN TUMOR-BEARING MICE

      Journal of drug targeting
    49. YANASE M; SHINKAI M; HONDA H; WAKABAYASHI T; YOSHIDA J; KOBAYASHI T
      INTRACELLULAR HYPERTHERMIA FOR CANCER USING MAGNETITE CATIONIC LIPOSOMES - AN IN-VIVO STUDY

      Japanese journal of cancer research
    50. OKUNO A; KAWANO H; SUN JM; KUROKAWA M; KOJINA A; NAKAOKA M
      FEASIBLE DEVELOPMENT OF SOFT-SWITCHED SIT INVERTER WITH LOAD-ADAPTIVEFREQUENCY-TRACKING CONTROL SCHEME FOR INDUCTION-HEATING

      IEEE transactions on industry applications
    51. JAIN PK; ESPINOZA JR; DEWAN SB
      SELF-STARTED VOLTAGE-SOURCE SERIES-RESONANT CONVERTER FOR HIGH-POWER INDUCTION-HEATING AND MELTING APPLICATIONS

      IEEE transactions on industry applications
    52. THOMPSON MT
      SIMPLE-MODELS AND MEASUREMENTS OF MAGNETICALLY INDUCED HEATING EFFECTS IN FERROMAGNETIC FLUIDS

      IEEE transactions on magnetics
    53. ALBERTZ D; HENNEBERGER G
      CALCULATION OF 3D EDDY-CURRENT FIELDS USING BOTH ELECTRIC AND MAGNETIC VECTOR POTENTIAL IN CONDUCTING REGIONS

      IEEE transactions on magnetics
    54. DUGHIERO F; BATTISTETTI M
      OPTIMIZATION PROCEDURES IN THE DESIGN OF CONTINUOUS INDUCTION HARDENING AND TEMPERING INSTALLATIONS FOR MAGNETIC STEEL BARS

      IEEE transactions on magnetics
    55. MAI W; HENNEBERGER G
      CALCULATION OF THE TRANSIENT TEMPERATURE DISTRIBUTION IN A TFIH DEVICE USING THE IMPEDANCE BOUNDARY-CONDITION

      IEEE transactions on magnetics
    56. DUGHIERO F; FORZAN M; LUPI S; TASCA M
      NUMERICAL AND EXPERIMENTAL-ANALYSIS OF AN ELECTROTHERMAL COUPLED PROBLEM FOR TRANSVERSE FLUX INDUCTION-HEATING EQUIPMENT

      IEEE transactions on magnetics
    57. BYUN JK; JUNG HK; HAHN SY; CHOI SY; PARK IH
      OPTIMAL TEMPERATURE CONTROL FOR INDUCTION-HEATING DEVICES USING PHYSICAL AND GEOMETRICAL DESIGN SENSITIVITY

      IEEE transactions on magnetics
    58. HEDIA H; HENROTTE F; DULAR P; REMACLE JF; LEGROS W
      OPTIMIZATION OF THE WIDTH OF A THIN-PLATE IN A TRANSVERSE FLUX INDUCTION FURNACE

      IEEE transactions on magnetics
    59. TSUBOI H; IKEDA K; KURATA M; KAINUMA K; NAKAMURA K
      EDDY-CURRENT ANALYSIS FOR THE PIPE WELDING

      IEEE transactions on magnetics
    60. Foti, G; Mousty, C; Reid, V; Comninellis, C
      Characterization of DSA type electrodes prepared by rapid thermal decomposition of the metal precursor

      ELECTROCHIMICA ACTA
    61. YEH HJ; BENATAR A
      TECHNICAL EVALUATION - METHODS FOR SEALING PAPER FOIL ASEPTIC FOOD PACKAGES/

      Tappi journal
    62. JACKSON DK; LEEB SB; MITWALLI AH; NARVAEZ P; FUSCO D; LUPTON EC
      POWER ELECTRONIC DRIVES FOR MAGNETICALLY TRIGGERED GELS

      IEEE transactions on industrial electronics
    63. LOZOWSKI WR
      PREPARATION OF A (LI0.74MG0.26)-LI-6 ALLOY TARGET

      Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment
    64. VIROONCHATAPAN E; SATO H; UENO M; ADACHI I; TAZAWA K; HORIKOSHI I
      RELEASE OF 5-FLUOROURACIL FROM THERMOSENSITIVE MAGNETOLIPOSOMES INDUCED BY AN ELECTROMAGNETIC-FIELD

      Journal of controlled release
    65. SLANGEN PM; JANSEN JC; VANBEKKUM H
      INDUCTION-HEATING - A NOVEL TOOL FOR ZEOLITE SYNTHESIS

      Zeolites
    66. CHUDNOVSKY V; AXELROD B; SHENKMAN A
      MEDIUM FREQUENCY COMBINED INVERTER FOR ELECTROHEAT WITH IMPROVED STARTING ARRANGEMENTS

      IEE proceedings. Electric power applications
    67. SAHIN AZ
      ANALYSIS OF SURFACE HEATING BY INDUCTION

      Journal of materials engineering and performance
    68. KCHAOU M; DURAND D; SAGASPE JP
      MANAGEMENT OF MATERIALS PROPERTIES IN AN ELECTRO-THERMO-METALLURGICALSIMULATION OF QUENCHING FOLLOWING INDUCTIVE SURFACE HEATING

      Journal of materials engineering and performance
    69. DOLMATOV NV
      A FERROMAGNETIC STEEL CYLINDER IN A POLYHARMONIC MAGNETIC-FIELD

      ELECTRICAL TECHNOLOGY
    70. CHINDRIS M; COLOSI T
      A VARIANT FOR NUMERICAL-SIMULATION OF A HIGH-FREQUENCY CONVERTER WITHVOLTAGE-FED INVERTER

      Mathematics and computers in simulation
    71. SADEGHIPOUR K; DOPKIN JA; LI K
      A COMPUTER-AIDED FINITE-ELEMENT EXPERIMENTAL-ANALYSIS OF INDUCTION-HEATING PROCESS OF STEEL

      Computers in industry
    72. CONRATHS HJ
      EDDY-CURRENT AND TEMPERATURE SIMULATION IN THIN MOVING METAL STRIPS

      International journal for numerical methods in engineering
    73. ISMAIL KS; MARZOUK RA
      ITERATIVE HYBRID FINITE-ELEMENT BOUNDARY-ELEMENT METHOD FOR THE ANALYSIS OF INDUCTION-HEATING SYSTEM WITH NONLINEAR CHARGE

      IEEE transactions on magnetics
    74. MOCHO P; BOURHIS JC; LECLOIREC P
      HEATING ACTIVATED CARBON BY ELECTROMAGNETIC INDUCTION

      Carbon
    75. FISHER JH; HOLLAND LR; JENKINS GM; MALEKI H
      A NEW PROCESS FOR THE PRODUCTION OF LONG GLASSY POLYMERIC CARBON HOLLOW WARE WITH UNIFORM WALL THICKNESS USING A SPRAY TECHNIQUE

      Carbon
    76. TAKAHASHI J; KEMMOCHI K; WATANABE J; FUKUDA H; HAYASHI R
      DEVELOPMENT OF ULTRA-HIGH TEMPERATURE TESTING EQUIPMENT AND SOME MECHANICAL AND THERMAL-PROPERTIES OF ADVANCED CARBON CARBON COMPOSITES/

      Advanced composite materials
    77. MAIZZA G; CALI M
      MODELING OF SINGLE-SHOT INDUCTION-HEATING BY INVERSE FINITE-ELEMENT METHOD

      International journal for numerical methods in fluids
    78. FRANCONI C; BANCI G; TIBERIO CA
      RF H-FIELD FLUXTUBES FOR SAFE AND CONTROLLED HYPERTHERMIA

      International journal of hyperthermia
    79. TAKASU T; SASSA K; ASAI S
      A GLASS MELTING BY USE OF A HIGH-FREQUENCY INDUCTION SKULL MELTING METHOD WITH SUBMERGED HEATING ELEMENTS AND ITS HEAT-CONDUCTION ANALYSIS

      Tetsu to hagane
    80. TAKASU T; SASSA K; ASAI S
      DIRECT INDUCTION SKULL MELTING OF ELECTRI CAL CONDUCTING MATERIALS USING CRUCIBLE WITH INSULATING COAT AND ITS HEAT-CONDUCTION ANALYSIS

      Tetsu to hagane
    81. HEACOCK R
      IMPROVING CROSS-DIRECTIONAL HARDNESS CONTROL

      Tappi journal
    82. FINK BK; MCCULLOUGH RL; GILLESPIE JW
      A MODEL TO PREDICT THE PLANAR ELECTRICAL POTENTIAL DISTRIBUTION IN CROSS-PLY CARBON-FIBER COMPOSITES SUBJECTED TO ALTERNATING MAGNETIC-FIELDS

      Composites science and technology
    83. IWAI K; SASSA K; ASAI S
      EFFECT OF SLIT DESIGN OF A COLD CRUCIBLE ON MAGNETIC-FIELD DISTRIBUTION AND HEAT-GENERATION RATE

      Tetsu to hagane


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 20/10/20 alle ore 14:06:56