Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'high strain rates' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 66 riferimenti
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Shen, BL; Yamasaki, T; Ogino, Y; Kimura, H; Inoue, A
      The liquid-enhanced plasticity and deformation behavior of Cu-Mg-TiC nanocrystalline composite

      MATERIALS TRANSACTIONS
    2. Lee, DG; Kim, S; Lee, S; Lee, CS
      Effects of microstructural morphology on quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    3. Hasegawa, T; Okazaki, K
      Uniform tensile elongation obtained from experiment and its estimation using dislocation dynamics parameters

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    4. Klepaczko, JR; Brara, A
      An experimental method for dynamic tensile testing of concrete by spalling

      INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
    5. Batra, RC; Jaber, NA
      Failure mode transition speeds in an impact loaded prenotched plate with four thermoviscoplastic relations

      INTERNATIONAL JOURNAL OF FRACTURE
    6. Guduru, PR; Rosakis, AJ; Ravichandran, G
      Dynamic shear bands: an investigation using high speed optical and infrared diagnostics

      MECHANICS OF MATERIALS
    7. Strachan, A; Cagin, T; Goddard, WA
      Critical behavior in spallation failure of metals - art. no. 060103

      PHYSICAL REVIEW B
    8. Llorca, F; Roy, G; Antoine, P
      Ductile damage of tantalum under spalling effects. Experimental and metallurgical analysis

      JOURNAL DE PHYSIQUE IV
    9. Gebbeken, N; Ruppert, M
      A new material model for concrete in high-dynamic hydrocode simulations

      ARCHIVE OF APPLIED MECHANICS
    10. Oosterkamp, LD; Ivankovic, A; Venizelos, G
      High strain rate properties of selected aluminium alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    11. Lennon, AM; Ramesh, KT
      The thermoviscoplastic response of polycrystalline tungsten in compression

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    12. Camborde, F; Mariotti, C; Donze, FV
      Numerical study of rock and concrete behaviour by discrete element modelling

      COMPUTERS AND GEOTECHNICS
    13. Sercombe, J; Ulm, FJ; Mang, HA
      Consistent return mapping algorithm for chemoplastic constitutive laws with internal couplings

      INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
    14. Zhigilei, LV; Garrison, BJ
      Microscopic mechanisms of laser ablation of organic solids in the thermal and stress confinement irradiation regimes

      JOURNAL OF APPLIED PHYSICS
    15. Hodowany, J; Ravichandran, G; Rosakis, AJ; Rosakis, P
      Partition of plastic work into heat and stored energy in metals

      EXPERIMENTAL MECHANICS
    16. Nemat-Nasser, S; Guo, WG; Liu, MQ
      Experimentally-based micromechanical modeling of dynamic response of molybdenum

      SCRIPTA MATERIALIA
    17. Klepaczko, JR; Klosak, M
      Numerical study of the critical impact velocity in shear

      EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
    18. Nieh, TG; Wadsworth, J
      Fine structure superplastic intermetallics

      INTERNATIONAL MATERIALS REVIEWS
    19. Bassim, MN; Panic, N
      High strain rate effects on the strain of alloy steels

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    20. Feng, H; Bassim, MN
      Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    21. Hasegawa, T; Okazaki, K; Yasuno, T; Takahashi, T
      Analysis of the temperature dependence of tensile elongation for a mechanically milled Al-1.1 at.%Mg-1.2 at.%Cu alloy by a dislocation dynamics approach

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    22. Kim, HG; Im, S
      Approximate analysis of a shear band in a thermoviscoplastic material

      JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
    23. NEMATNASSER S; LI YL
      FLOW-STRESS OF FCC POLYCRYSTALS WITH APPLICATION TO OFHC CU

      Acta materialia
    24. Hasegawa, T; Yasuno, T; Nagai, T; Takahashi, T
      Origin of superplastic elongation in aluminum alloys produced by mechanical milling

      ACTA MATERIALIA
    25. MACDOUGALL D
      A RADIANT HEATING METHOD FOR PERFORMING HIGH-TEMPERATURE HIGH-STRAIN-RATE TESTS

      Measurement science & technology (Print)
    26. LEE WS; LIN CF
      PLASTIC-DEFORMATION AND FRACTURE-BEHAVIOR OF TI-6AL-4V ALLOY LOADED WITH HIGH-STRAIN RATE UNDER VARIOUS TEMPERATURES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    27. Mohri, T; Mabuchi, M; Saito, N; Nakamura, M
      Microstructure and mechanical properties of a Mg-4Y-3RE alloy processed bythermo-mechanical treatment

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    28. NIEH TG; WADSWORTH J
      FINE-STRUCTURE SUPERPLASTICITY IN MATERIALS

      Zhongguo gongcheng xuekan
    29. Liao, SC; Duffy, J
      Adiabatic smear bands in a Ti-6Al-4V titanium alloy

      JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
    30. Moufki, A; Molinari, A; Dudzinski, D
      Modelling of orthogonal cutting with a temperature dependent friction law

      JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
    31. CHAN KC; HAN BQ
      HIGH-STRAIN-RATE SUPERPLASTICITY OF PARTICULATE-REINFORCED ALUMINUM-MATRIX COMPOSITES

      International journal of mechanical sciences
    32. BARTON DC; MIRZA MS; WAHEED M; STURGES JL; CHURCH P
      THE HIGH STRAIN-RATE FRACTURE CHARACTERISTICS OF DUCTILE METALS AT ELEVATED AND SUB-AMBIENT TEMPERATURES

      Fatigue & fracture of engineering materials & structures
    33. MABUCHI M; IWASAKI H; YANASE K; HIGASHI K
      LOW-TEMPERATURE SUPERPLASTICITY IN AN AZ91 MAGNESIUM ALLOY PROCESSED BY ECAE

      Scripta materialia
    34. KAWAZOE M; SHIBATA T; MUKAI T; HIGASHI K
      ELEVATED-TEMPERATURE MECHANICAL-PROPERTIES OF AA5056 AL-MG ALLOY PROCESSED BY EQUAL-CHANNEL-ANGULAR-EXTRUSION

      Scripta materialia
    35. PANTLEON W; TROTZSCHEL JTR; KLIMANEK P
      SIMULATION OF SUBSTRUCTURE EVOLUTION DURING HIGH-SPEED DEFORMATION

      Journal de physique. IV
    36. MUKAI T; WATANABE H; HIGASHI K
      MECHANICAL-PROPERTIES AT ELEVATED-TEMPERATURES IN SUPERPLASTICALLY-DEFORMED, NANODISPERSION STRENGTHENED ALUMINUM

      Nanostructured materials
    37. SATOH T; OKIMOTO K; NISHIDA S
      HIGH-TEMPERATURE DEFORMATION-BEHAVIOR OF ALUMINUM-ALLOYS PRODUCED FROM CENTRIFUGALLY-ATOMIZED POWDERS

      Journal of materials processing technology
    38. ESTRIN Y; MOLINARI A; MERCIER S
      THE ROLE OF RATE EFFECTS AND OF THERMOMECHANICAL COUPLING IN SHEAR LOCALIZATION

      Journal of engineering materials and technology
    39. NOBRE JP; DIAS AM; GRAS R
      RESISTANCE OF A DUCTILE STEEL SURFACE TO SPHERICAL NORMAL IMPACT INDENTATION - USE OF A PENDULUM MACHINE

      Wear
    40. IMAI T; KOJIMA S; LESPERANCE G; HONG BD; JIANG D; NIEH TG
      EFFECTS OF TEMPERATURE ON THE SUPERPLASTIC CHARACTERISTICS OF A POWDER-METALLURGY PURE ALUMINUM

      Scripta materialia
    41. XU YB; BAI YL; XUE Q; SHEN LT
      FORMATION, MICROSTRUCTURE AND DEVELOPMENT OF THE LOCALIZED SHEAR DEFORMATION IN LOW-CARBON STEELS

      Acta materialia
    42. ALTYNOVA M; HU XY; DAEHN GS
      INCREASED DUCTILITY IN HIGH-VELOCITY ELECTROMAGNETIC RING EXPANSION

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    43. TOUTLEMONDE F; ROSSI P; BOULAY C; GOURRAUD C; GUEDON D
      DYNAMIC BEHAVIOR OF CONCRETE - TESTS OF SLABS WITH A SHOCK-TUBE

      Materials and structures
    44. SATOH T; OKIMOTO K; NISHIDA S; MATSUKI K
      SUPERPLASTIC-LIKE BEHAVIOR OF RAPID-SOLIDIFICATION-PROCESSED HYPER-EUTECTIC AL-SI P M ALLOYS/

      Scripta metallurgica et materialia
    45. KOIKE J; MABUCHI M; HIGASHI K
      IN-SITU OBSERVATION OF PARTIAL MELTING IN SUPERPLASTIC ALUMINUM-ALLOYCOMPOSITES AT HIGH-TEMPERATURES

      Acta metallurgica et materialia
    46. YADAV S; RAMESH KT
      THE MECHANICAL-PROPERTIES OF TUNGSTEN-BASED COMPOSITES AT VERY HIGH-STRAIN RATES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    47. HIGASHI K; OKADA T; MUKAI T; TANIMURA S; NIEH TG; WADSWORTH J
      SUPERPLASTICITY IN VERY FINE-GRAINED AL-BASED ALLOYS PRODUCED BY MECHANICAL ALLOYING

      Materials transactions, JIM
    48. KOIKE J; MABUCHI M; HIGASHI K
      PARTIAL MELTING AND SEGREGATION BEHAVIOR IN A SUPERPLASTIC SI3N4 AL-MG ALLOY COMPOSITE/

      Journal of materials research
    49. CHERUKURI HP; SHAWKI TG
      AN ENERGY-BASED LOCALIZATION THEORY .1. BASIC FRAMEWORK

      International journal of plasticity
    50. BISCHOFF PH; PERRY SH
      IMPACT BEHAVIOR OF PLAIN CONCRETE LOADED IN UNIAXIAL COMPRESSION

      Journal of engineering mechanics
    51. IWASAKI H; TAKEUCHI M; MORI T; MABUCHI M; HIGASHI K
      A COMPARATIVE-STUDY OF CAVITATION CHARACTERISTICS IN SI3N4P AL-MG-SI COMPOSITE AND 7475-ALUMINUM ALLOY/

      Scripta metallurgica et materialia
    52. BALANETHIRAM VS; DAEHN GS
      HYPERPLASTICITY - INCREASED FORMING LIMITS AT HIGH WORKPIECE VELOCITY

      Scripta metallurgica et materialia
    53. MABUCHI M; HIGASHI K
      SUPERPLASTIC DEFORMATION MECHANISM ACCOMMODATED BY THE LIQUID-PHASE IN METAL-MATRIX COMPOSITES

      Philosophical magazine letters
    54. BHAT BVR; MAHAJAN YR; ROSHAN HM; PRASAD YVRK
      CHARACTERISTICS OF SUPERPLASTICITY DOMAIN IN THE PROCESSING MAP FOR HOT-WORKING OF AN AL-ALLOY 2014-20VOL-PERCENT-AL2O3 METAL-MATRIX COMPOSITE

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    55. MABUCHI M; HIGASHI K
      THERMAL-STABILITY AND SUPERPLASTIC CHARACTERISTICS IN SI3N4 AL-MG-SI COMPOSITES

      Materials transactions, JIM
    56. BAI YL; XUE Q; XU YB; SHEN LT
      CHARACTERISTICS AND MICROSTRUCTURE IN THE EVOLUTION OF SHEAR LOCALIZATION IN TI-6AL-4V ALLOY

      Mechanics of materials
    57. MEYERS MA; SUBHASH G; KAD BK; PRASAD L
      EVOLUTION OF MICROSTRUCTURE AND SHEAR-BAND FORMATION IN ALPHA-HCP TITANIUM

      Mechanics of materials
    58. BESTERCI M; PESEK L; BILLY J
      TEMPERATURE-DEPENDENCE OF THE MECHANICAL- PROPERTIES OF DISPERSION-STRENGTHENED CU-AL2O3 SYSTEMS

      Kovove materialy
    59. BESTERCI M; PESEK L; BILLY J
      TEMPERATURE-DEPENDENCE OF THE MECHANICAL- PROPERTIES OF DISPERSION-STRENGTHENED CU-AL2O3 SYSTEMS

      Kovove materialy
    60. SHAWKI TG
      AN ENERGY CRITERION FOR THE ONSET OF SHEAR LOCALIZATION IN THERMAL VISCOPLASTIC MATERIALS .1. NECESSARY AND SUFFICIENT INITIATION CONDITIONS

      Journal of applied mechanics
    61. TANG ZP; LI XZ; ZHOU GQ; LIAO XL; WU HX; GUO DH; DAI YS; WANG SB
      EXPERIMENTAL INVESTIGATIONS OF LASER-INDUCED SPALL IN METALLIC TARGETS

      Chinese Science Bulletin
    62. KIM JH; LEE DN; OH KH
      HIGH-TEMPERATURE DEFORMATION-BEHAVIOR IN A 2124AL 15VOL-PERCENT-SIC(W) COMPOSITE/

      Scripta metallurgica et materialia
    63. WADSWORTH J; NIEH TG
      SUPERPLASTICITY IN CERAMIC AND METAL-MATRIX COMPOSITES AND THE ROLE OF GRAIN-SIZE, SEGREGATION, INTERFACES, AND 2ND PHASE MORPHOLOGY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    64. HIGASHI K
      POSITIVE EXPONENT SUPERPLASTICITY IN ADVANCED ALUMINUM-ALLOYS WITH NANO OR NEAR-NANO SCALE GRAINED STRUCTURES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    65. NOVIKOV II
      HIGH-SPEED SUPERPLASTICITY OF ALUMINUM-ALLOYS

      Metal science and heat treatment
    66. MABUCHI M; IMAI T; HIGASHI K
      PRODUCTION OF SUPERPLASTIC ALUMINUM COMPOSITES REINFORCED WITH SI3N4 BY POWDER-METALLURGY

      Journal of Materials Science


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 22/10/20 alle ore 03:53:43