Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'heat treatment' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 1815 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. ONAL M
      Swelling and cation exchange capacity relationship for the samples obtained from a bentonite by acid activations and heat treatments

      Applied clay science
    2. Uchida, M; Kim, HM; Miyaji, F; Kokubo, T; Nakamura, T
      Apatite formation on zirconium metal treated with aqueous NaOH

      BIOMATERIALS
    3. Dowdy, AK; Fields, PG
      Heat combined with diatomaceous earth to control the confused flour beetle(Coleoptera : Tenebrionidae) in a flour mill

      JOURNAL OF STORED PRODUCTS RESEARCH
    4. Caudillo, M; Herrera-Trejo, M; Castro, MR; Ramirez, E; Gonzalez, CR; Juarez, JI
      On carbide dissolution in an as-cast ASTM F-75 alloy

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    5. Feng, B; Chen, Y; Zhang, XD
      Effect of water vapor treatment on apatite formation on precalcified titanium and bond strength of coatings to substrates

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    6. Ong, JL; Bessho, K; Cavin, R; Carnes, DL
      Bone response to radio frequency sputtered calcium phosphate implants and titanium implants in vivo

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    7. Choi, HJ; Kwag, G; Kim, S
      Electrochemical and XAFS investigation of nitrite reduction by heat-treated mu-oxo derivative of iron phthalocyanine supported on high area carbon

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    8. DeEll, JR; Khanizadeh, S; Saad, F; Ferree, DC
      Factors affecting apple fruit firmness - A review

      JOURNAL AMERICAN POMOLOGICAL SOCIETY
    9. Bhuiyan, MTR; Hirai, N; Sobue, N
      Effect of intermittent heat treatment on crystallinity in wood cellulose

      JOURNAL OF WOOD SCIENCE
    10. Fejes, P; Kiricsi, I; Kukovecz, A; Kovacs, K; Lazar, K; Marsi, I; Oszko, A; Banvolgyi, G
      Incorporation of iron into sodalite structures and their transformation toother iron containing zeolite species

      MAGYAR KEMIAI FOLYOIRAT
    11. Teng, HS; Weng, TC
      Transformation of mesophase pitch into different carbons by heat treatmentand KOH etching

      MICROPOROUS AND MESOPOROUS MATERIALS
    12. Molina-Sabio, M; Caturla, F; Rodriguez-Reinoso, F; Kharitonova, GV
      Porous structure of a sepiolite as deduced from the adsorption of N-2, CO2, NH3 and H2O

      MICROPOROUS AND MESOPOROUS MATERIALS
    13. Browning, E; Lewis, M; MacDougall, D
      Predicting safety and quality parameters for UHT-processed milks

      INTERNATIONAL JOURNAL OF DAIRY TECHNOLOGY
    14. Marks, NE; Grandison, AS; Lewis, MJ
      Use of hydrogen peroxide detection strips to determine the extent of pasteurization in whole milk

      INTERNATIONAL JOURNAL OF DAIRY TECHNOLOGY
    15. Rashidi, AM; Moshrefi-Torbati, M
      Dual matrix structure (DMS) ductile cast iron: The effect of heat treatingvariables on the mechanical properties

      INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
    16. Reddy, GM; Mohandas, T; Chandreshekar, K
      Observations on welding of alpha(2)+O+beta titanium aluminide

      SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
    17. Wen, CE; Mabuchi, M; Yamada, Y; Shimojima, K; Chino, Y; Asahina, T
      Processing of biocompatible porous Ti and Mg

      SCRIPTA MATERIALIA
    18. Lu, WJ; Zhang, D; Zhang, XN; Wu, RJ; Sakata, T; Mori, H
      HREM study of TiB/Ti interfaces in a Ti-TiB-TiC in situ composite

      SCRIPTA MATERIALIA
    19. Garmestani, H; Al-Haik, M; Townsley, TA; Sabinash, C
      Residual stress development during fabrication and processing of gamma-titanium based composites

      SCRIPTA MATERIALIA
    20. Barlow, IC; Jones, H; Rainforth, WM
      Evolution of microstructure and hardening, and the role of Al3Ti coarsening, during extended thermal treatment in mechanically alloyed Al-Ti-O based materials

      ACTA MATERIALIA
    21. Chowdhury, SG; Kumar, P; Das, SK; Bhattacharya, DK; Parida, N
      Failure analysis of high temperature studs

      ENGINEERING FAILURE ANALYSIS
    22. Kuwahara, H; Al-Abdullat, Y; Mazaki, N; Tsutsumi, S; Aizawa, T
      Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank's solution

      MATERIALS TRANSACTIONS
    23. Ishida, A; Sato, M; Kimura, T; Sawaguchi, T
      Effects of composition and annealing on shape memory behavior of Ti-rich Ti-Ni thin films formed by sputtering

      MATERIALS TRANSACTIONS
    24. Kanahashi, H; Mukai, T; Yamada, Y; Shimojima, K; Mabuchi, M; Aizawa, T; Higashi, K
      Improvement of crashworthiness in ultra lightweight metallic foam by heat-treatment for microstructural modification of base material

      MATERIALS TRANSACTIONS
    25. Hojo, M; Yamao, T; Tanaka, M; Ochiai, S; Iwashita, N; Sawada, Y
      Effect of interface control on mode I interlaminar fracture toughness of woven C/C composite laminates

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    26. Ibrahim, MM; Khalil, SM
      Dependence of some Bi1.7Pb0.3Sr2Ca2Cu3Oy physical properties on the annealing period

      EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS
    27. Juaneda, P; Cordier, O; Gregoire, S; Sebedio, JL
      Conjugated linoleic acid (CLA) isomers in heat-treated vegetable oils

      OCL-OLEAGINEUX CORPS GRAS LIPIDES
    28. Cozzolino, R; Passalacqua, S; Salemi, S; Malvagna, P; Spina, E; Garozzo, D
      Identification of adulteration in milk by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

      JOURNAL OF MASS SPECTROMETRY
    29. von Holst, C; Unglaub, W; Anklam, E
      Post process product control of rendering plant sterilization conditions by ELISA

      JOURNAL OF AOAC INTERNATIONAL
    30. Pallaroni, L; Bjorklund, E; von Holst, C; Unglaub, W
      Determination of rendering plant sterilization conditions using a commercially available ELISA test kit developed for detection of cooked beef

      JOURNAL OF AOAC INTERNATIONAL
    31. Kang, HK; Taylor, PR
      Direct production of porous cathode material (La1-xSrxMnO3) using a reactive DC thermal plasma spray system

      JOURNAL OF THERMAL SPRAY TECHNOLOGY
    32. de Brito, VLO; Voorwald, HJC; das Neves, N; Bott, ID
      Effects of a postweld heat treatment on a submerged arc welded ASTM A537 pressure vessel steel

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    33. Hassan, AM; Hayajneh, MT
      Statistical analysis of the effects of machining parameters and workpiece hardness on the surface finish of machined medium carbon steel

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    34. de la Garza, Z; Herrera-Trejo, M; Castro, M; Ramirez, E; Mendez, M; Mendez, J
      Effect of Zr additions on mechanical properties of an ASTM f-75 alloy

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    35. Sudhakar, KV; Haque, ME
      Mechanical behavior of powder metallurgy steel - Experimental investigation and artificial neural network-based prediction model

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    36. Kewther, A; Yilbas, BS; Hashmi, MSJ
      Corrosion properties of inconel 617 alloy after heat treatment at elevatedtemperature

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    37. Chen, WP; Watanabe, K; Motokawa, M; Maeda, H
      Oriented crystal growth in Bi(Pb)2223 bulks prepared with magnetic melt processing

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    38. Young, EA; Yang, Y; Beduz, C; Riddle, R
      Ic and phase characteristics of (Bi,Pb)2223 tapes after 1 heat treatment in a temperature gradient, under different oxygen partial pressures

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    39. Nemoto, Y; Fujii, H; Miao, H; Kitaguchi, H; Kumakura, H; Togano, K; Shima, K
      Fabrication of low cost Bi-2212 superconductors using Ag/Ni clad tape

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    40. Barzi, E; Gregory, E; Pyon, T
      Heat treatment optimization of internal tin Nb3Sn strands

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    41. Pantsyrnyi, V; Shikov, A; Vorobieva, A; Soudiev, S; Silaev, A; Kozlenkova, N; Beliakov, N
      Superconducting properties of internal-tin Nb3Sn wire with enhanced current capacity

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    42. Park, WK; Lee, HJ; Kye, JI; Yun, JH; Lee, SM; Moon, SH; Oh, B
      Effect of ion beam damage and heat treatment on interface-modified junctions

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    43. Uemura, Y; Baba, T; Hasegawa, Y; Yanagihara, O; Matsumoto, K; Kawai, T
      Development of control serum for microbial antibody tests

      BIOLOGICALS
    44. Lech-Grega, M; Hawrylkiewicz, S; Richert, M; Szymanski, W
      Structural parameters of 7020 alloy after heat treatment simulating the welding process

      MATERIALS CHARACTERIZATION
    45. Leroux, L; Lacout, JL
      Synthesis of calcium-strontium phosphate fluor-hydroxyapatites by neutralisation

      PHOSPHORUS SULFUR AND SILICON AND THE RELATED ELEMENTS
    46. Li, XS; Zhu, HW; Ci, LJ; Xu, CL; Mao, ZQ; Wei, BQ; Liang, J; Wu, DH
      Effects of structure and surface properties on carbon nanotubes' hydrogen storage characteristics

      CHINESE SCIENCE BULLETIN
    47. Yao, JY; Graham, DA; Rinderer, B; Couper, MJ
      A TEM study of precipitation in Al-Mg-Si alloys

      MICRON
    48. Hodge, AM; Dunand, DC
      Synthesis of nickel-aluminide foams by pack-aluminization of nickel foams

      INTERMETALLICS
    49. Blachowski, A; Dubiel, SM; Zukrowski, J
      On the activation energy of the sigma-phase formation in a pure and Ti-doped Fe-Cr alloy

      INTERMETALLICS
    50. Yang, J; Wang, JN; Wang, Y; Xia, QF; Zhang, B
      Control of the homogeneity of the lamellar structure of a TiAl alloy refined by heat treatment

      INTERMETALLICS
    51. Yamabe-Mitarai, Y; Ro, Y; Nakazawa, S
      Temperature dependence of the flow stress of Ir-based Ll(2) intermetallics

      INTERMETALLICS
    52. Orsat, V; Gariepy, Y; Raghavan, GSV; Lyew, D
      Radio-frequency treatment for ready-to-eat fresh carrots

      FOOD RESEARCH INTERNATIONAL
    53. Heck, U; Fritsching, U; Bauckhage, K
      Fluid flow and heat transfer in gas jet quenching of a cylinder

      INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW
    54. Kelly, PM; O'Kennedy, BT
      The effect of casein/whey protein ratio and minerals on the rheology of fresh cheese gels using a model system

      INTERNATIONAL DAIRY JOURNAL
    55. Singh, H; Waungana, A
      Influence of heat treatment of milk on cheesemaking properties

      INTERNATIONAL DAIRY JOURNAL
    56. Lucey, JA; Tamehana, M; Singh, H; Munro, PA
      Effect of heat treatment on the physical properties of milk gels made withboth rennet and acid

      INTERNATIONAL DAIRY JOURNAL
    57. Benfeldt, C; Sorensen, J
      Heat treatment of cheese milk: effect on proteolysis during cheese ripening

      INTERNATIONAL DAIRY JOURNAL
    58. Desmond, C; Stanton, C; Fitzgerald, GF; Collins, K; Ross, RP
      Environmental adaptation of probiotic lactobacilli towards improvement of performance during spray drying

      INTERNATIONAL DAIRY JOURNAL
    59. Lindmark-Mansson, H; Chen, J; Paulsson, M; Alden, G; Ren, B; Ladenstein, R; Akesson, B
      The effect of storage and heat treatment on glutathione peroxidase in bovine milk and whey

      INTERNATIONAL DAIRY JOURNAL
    60. Saha, B; Tai, MH; Streat, M
      Study of activated carbon after oxidation and subsequent treatment characterization

      PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
    61. Antunes, AC; Antunes, SRM; Pianaro, SA; Longo, E; Leite, ER; Varela, JA
      Effect of La2O3 doping on the microstructure and electrical properties of a SnO2-based varistor

      JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
    62. Joffre, F; Martin, JC; Genty, M; Demaison, L; Loreau, O; Noel, JP; Sebedio, JL
      Kinetic parameters of hepatic oxidation of cyclic fatty acid monomers formed from linoleic and linolenic acids

      JOURNAL OF NUTRITIONAL BIOCHEMISTRY
    63. Morris, WD
      A production planning and design model for assessing the thermal behaviourof thick steel strip during continuous heat treatment

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
    64. Boiocchi, M; Caucia, F; Merli, M; Prella, D; Ungaretti, L
      Crystal-chemical reasons for the immiscibility of periclase and wustite under lithospheric P, T conditions

      EUROPEAN JOURNAL OF MINERALOGY
    65. Suzuki, H; Tsuruhara, A; Tezuka, T
      Regulations of the C2H4-forming system and the H2O2-scavenging system by heat treatment associated with self incompatibility in lily

      SEXUAL PLANT REPRODUCTION
    66. Song, RG; Zhang, QZ
      Heat treatment optimization for 7175 aluminum alloy by genetic algorithm

      MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS
    67. Song, RG; Zhang, QZ
      Heat treatment optimization for 7175 aluminum alloy by evolutionary algorithm

      MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS
    68. Murakami, K; Yamada, T; Kaga, K; Fuda, K; Matsunaga, T
      Cation exchange properties of heat-treated Australian brown coal: influences of pre-exchanged calcium ions

      COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
    69. Kim, H; Kim, D
      Influence of CdS heat treatment on the microstructure of CdS and the performance of CdS/CdTe solar cells

      SOLAR ENERGY MATERIALS AND SOLAR CELLS
    70. Godoy, S; Meschy, F
      Utilisation of phytate phosphorus by rumen bacteria in a semi-continuous culture system (Rusitec) in lactating goats fed on different forage to concentrate ratios

      REPRODUCTION NUTRITION DEVELOPMENT
    71. Jacobi, KK; MacRae, EA; Hetherington, SE
      Loss of heat tolerance in 'Kensington' mango fruit following heat treatments

      POSTHARVEST BIOLOGY AND TECHNOLOGY
    72. Song, RG; Zhang, QZ
      Heat treatment technique optimization for 7175 aluminum alloy by an artificial neural network and a genetic algorithm

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    73. Kim, HK; Oh, SI
      Evaluation of heat transfer coefficient during heat treatment by inverse analysis

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    74. Dobrzanski, LA
      Structure and properties of high-speed steels with wear resistant cases orcoatings

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    75. Sokolowski, JH; Djurdjevic, MB; Kierkus, CA; Northwood, DO
      Improvement of 319 aluminum alloy casting durability by high temperature solution treatment

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    76. Szewieczek, D; Tyrlik-Held, J; Lesz, S
      Changes of mechanical properties and fracture morphology of amorphous tapes involved by heat treatment

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    77. Grabco, D; Palistrant, N; Rusu, E
      Increasing of dislocation mobility by heat treatment of deformed pure and doped InP crystals

      MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY
    78. Kennedy, AR; Weston, DP; Jones, MI
      Reaction in Al-TiC metal matrix composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    79. Geng, H; Tian, XF; Cui, HW; Li, CD; Peng, Z
      Antifriction and wear behaviour of ZAS35 zinc alloy: influence of heat treatment and melting technique

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    80. Sarioglu, F
      The effect of tempering on susceptibility to stress corrosion cracking of AISI 4140 steel in 33% sodium hydroxide at 80 degrees C

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    81. Kanahashi, H; Mukai, T; Yamada, Y; Shimojima, K; Mabuchi, M; Aizawa, T; Higashi, K
      Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    82. Habelitz, S; Carl, G; Russel, C
      Processing, microstructure and mechanical properties of extruded mica glass-ceramics

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    83. Atalay, S; Adiguzel, HI; Kamer, O
      Effect of different heat treatments on magnetoelastic properties of Fe-based amorphous wire

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    84. Ong, MS; Li, Y; Blackwood, DJ; Ng, SC
      The influence of heat treatment on the corrosion behaviour of amorphous melt-spun binary Mg-18 at.% Ni and Mg-21 at.% Cu alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    85. Hambleton, R; Jones, H; Rainforth, WM
      Effect of allay composition and reinforcement with silicon carbide on the microstructure and mechanical properties of three silicide dispersion strengthened aluminium alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    86. Kim, KB; Kim, SH; Kim, WT; Kim, DH; Hong, KT
      Structural evolution during heat treatment of mechanically alloyed Al-Cu-Fe-(Si) alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    87. Lee, JH; Kim, KB; Lee, JS; Kim, DH; Kim, WT
      Formation of nano-sized Ti68Fe26Si6 icosahedral quasicrystalline phase by rapid quenching and mechanical alloying

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    88. Venkateswarlu, K; Murty, BS; Chakraborty, M
      Effect of hot rolling and heat treatment of Al-STi-1B master alloy on the grain refining efficiency of aluminium

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    89. Lu, YZ; Wang, QD; Zeng, XQ; Zhu, YP; Ding, WJ
      Behavior of Mg-GAl-xSi alloys during solution heat treatment at 420 degrees C

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    90. Zhang, F; Sun, PF; Li, XC; Zhang, GD
      An experimental study on deformation behavior below 0.2% offset yield stress in some SiCp/Al composites and their unreinforced matrix alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    91. Xia, QF; Wang, JN; Wang, Y; Yang, J
      Effect of heating rate on the grain refinement of a TiAl alloy by cyclic heat treatment

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    92. Zhang, YM; Han, JC; Zhang, XH; He, XD; Li, ZQ; Du, SY
      Rapid prototyping and combustion synthesis of TiC/Ni functionally gradientmaterials

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    93. Semiatin, SL; Fagin, PN; Glavicic, MG; Sukonnik, IM; Ivasishin, OM
      Influence on texture on beta grain growth during continuous annealing of Ti-6Al-4V

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    94. Prasad, U; Xu, Q; Chaturvedi, MC
      The effect of silicon on the near-surface microstructural evolution duringhigh temperature heat treatment of a TiAl based alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    95. Giovannelli, F; Marinel, S; Monot-Laffez, I; Desgardin, G
      Texturation of NdBa2Cu3Oy bars under air in a vertical Bridgman furnace

      PHYSICA C
    96. Fillunger, H; Foitl, M; Hense, K; Kajgana, I; Kirchmayr, H; Kasztler, A; Kolbeck, C; Kral, I; Maix, R
      Influence of the heat treatment of internal tin Nb3Sn strands on the critical current and the magnetization losses

      PHYSICA C
    97. Kim, M; Kim, K; Chang, Y; Lim, B; Kim, S; Yoon, CS
      Performance variation of KSTAR Nb3Sn strand caused by heat treatment failure

      PHYSICA C
    98. Mansour, E; El-Damrawi, GM; Moustafa, YM; Abd El-Maksoud, S; Doweidar, H
      Polaronic conduction in barium borate glasses containing iron oxide

      PHYSICA B
    99. Nakajima, K; Urabe, T; Hosoya, Y; Kamishi, S; Miyata, T; Takeda, N
      Influence of microstructural morphology and prestraining on short fatigue crack propagation in dual-phase steels

      ISIJ INTERNATIONAL
    100. Saito, T; Tatsumisago, M; Minami, T
      Crystallization of alpha-Agl from melt and glass in the Agl-Ag2O-B2O3 system

      JOURNAL OF THE CERAMIC SOCIETY OF JAPAN


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 25/10/20 alle ore 11:26:00