Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'heat exchangers' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 319 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Stulir, R; Stehlik, P; Oral, J; Fabikovic, V
      Fully integrated unit for thermal treatment of gas wastes

      APPLIED THERMAL ENGINEERING
    2. Clarke, DD; Vasquez, VR; Whiting, WB; Greiner, M
      Sensitivity and uncertainty analysis of heat-exchanger designs to physicalproperties estimation

      APPLIED THERMAL ENGINEERING
    3. Roy, A; Das, SK
      An analytical solution for a cyclic regenerator in the warm-up period in presence of an axially dispersive wave

      INTERNATIONAL JOURNAL OF THERMAL SCIENCES
    4. Khalfi, MS; Benelmir, R; Feidt, M
      Experimental study of a finned-tubes coil with wet wall conditions

      INTERNATIONAL JOURNAL OF THERMAL SCIENCES
    5. Muzychka, YS; Yovanovich, MM
      Modeling the f and j characteristics for transverse flow through an offsetstrip fin at low Reynolds number

      JOURNAL OF ENHANCED HEAT TRANSFER
    6. Muzychka, YS; Yovanovich, MM
      Modeling the f and j characteristics of the offset strip fin array

      JOURNAL OF ENHANCED HEAT TRANSFER
    7. Stephens, LS; Kelly, KW; Kountouris, D; McLean, J
      A pin fin microheat sink for cooling macroscale conformal surfaces under the influence of thrust and frictional forces

      JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
    8. Arias, F; Oliver, SRJ; Xu, B; Holmlin, RE; Whitesides, GM
      Fabrication of metallic heat exchangers using sacrificial polymer mandrils

      JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
    9. Yang, QF; Ding, J; Shen, ZQ
      Scaling and removal of calcium carbonate on electroless plating surface

      CHINESE JOURNAL OF CHEMICAL ENGINEERING
    10. Zitek, P; Hlava, J
      Anisochronic internal model control of time-delay systems

      CONTROL ENGINEERING PRACTICE
    11. Shinskey, FG
      PID-deadtime control of distributed processes

      CONTROL ENGINEERING PRACTICE
    12. Carotenuto, A; Casarosa, C; Vanoli, L
      Optimizing the position of the tube casing slotted section for geothermal wells with a downhole heat exchanger

      GEOTHERMICS
    13. Lin, WW; Lee, DJ; Peng, XF
      Second-law analysis of vapor condensation of FC-22 in film flows within horizontal tubes

      JOURNAL OF THE CHINESE INSTITUTE OF CHEMICAL ENGINEERS
    14. Sara, ON; Pekdemir, T; Yapici, S; Yilmaz, M
      Enhancement of heat transfer from a flat surface in a channel flow by attachment of rectangular blocks

      INTERNATIONAL JOURNAL OF ENERGY RESEARCH
    15. Alebrahim, A; Bejan, A
      Thermodynamic optimization of heat-transfer equipment configuration in an environmental control system

      INTERNATIONAL JOURNAL OF ENERGY RESEARCH
    16. Lin, WW; Lee, DJ; Peng, XF
      Condensation performance in horizontal tubes with second-law consideration

      INTERNATIONAL JOURNAL OF ENERGY RESEARCH
    17. Kim, MH; Bullard, CW
      Development of a microchannel evaporator model for a CO2 air-conditioning system

      ENERGY
    18. Sebben, S
      Turbulent flow in arrays of interrupted plates: Application to heat exchangers

      LATIN AMERICAN APPLIED RESEARCH
    19. Kenning, DBR; Yan, YY
      Saturated flow boiling of water in a narrow channel: Experimental investigation of local phenomena

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    20. Bergles, AE
      The implications and challenges of enhanced heat transfer for the chemicalprocess industries

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    21. Patnaik, BSV; Gowda, YTK; Ravisankar, MS; Narayana, PAA; Seetharamu, KN
      Finite element simulation of internal flows with heat transfer using a velocity correction approach

      SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
    22. Sozen, A
      Effect of heat exchangers on performance of absorption refrigeration systems

      ENERGY CONVERSION AND MANAGEMENT
    23. Antar, MA; Zubair, SM
      Thermoeconomic considerations in the optimum allocation of heat exchanger inventory for a power plant

      ENERGY CONVERSION AND MANAGEMENT
    24. Vargas, JVC; Bejan, A
      Thermodynamic optimization of finned crossflow heat exchangers for aircraft environmental control systems

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    25. Sara, ON; Pekdemir, T; Yapici, S; Yilmaz, M
      Heat-transfer enhancement in a channel flow with perforated rectangular blocks

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    26. Bouris, D; Papadakis, G; Bergeles, G
      Numerical evaluation of alternate tube configurations for particle deposition rate reduction in heat exchanger tube bundles

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    27. Souidi, N; Bontemps, A
      Countercurrent gas-liquid flow in plate-fin heat exchangers with plain andperforated fins

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    28. Rosengarten, G; Morrison, GL; Behnia, M
      Mixed convection in a narrow rectangular cavity with bottom inlet and outlet

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    29. Wang, CC; Lee, WS; Sheu, WJ
      Airside performance of staggered tube bundle having shallow tube rows

      CHEMICAL ENGINEERING COMMUNICATIONS
    30. Chen, XD; Xu, XY; Nguang, SK; Bergles, AE
      Characterization of the effect of corrugation angles on hydrodynamic and heat transfer performance of four-start spiral tubes

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    31. Korte, C; Jacobi, AM
      Condensate retention effects on the performance of plain-fin-and-tube heatexchangers: Retention data and modeling

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    32. Vargas, JVC; Bejan, A; Siems, DL
      Integrative thermodynamic optimization of the crossflow heat exchanger foran aircraft environmental control system

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    33. Khan, JUR; Zubair, SM
      An improved design and rating analyses of counter flow wet cooling towers

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    34. Lawton, KM; Patterson, SR; Keanini, RG
      Precision temperature control of high-throughput fluid flows: Theoretical and experimental analysis

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    35. Diaz, G; Sen, M; Yang, KT; McClain, RL
      Adaptive neurocontrol of heat exchangers

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    36. Kim, MH; Shin, JS; Bullard, CW
      Heat transfer and pressure drop characteristics during R22 evaporation in an oval microfin tube

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    37. Pacheco-Vega, A; Diaz, G; Sen, M; Yang, KT; McClain, RL
      Heat rate predictions in humid air-water heat exchangers using correlations and neural networks

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    38. Park, HG; Gharib, M
      Experimental study of heat convection from stationary and oscillating circular cylinder in cross flow

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    39. Kolodziej, JA; Strek, T
      Analytical approximations of the shape factors for conductive heat flow incircular and regular polygonal cross-sections

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    40. Jiang, PX; Fan, MH; Si, GS; Ren, ZP
      Thermal-hydraulic performance of small scale micro-channel and porous-media heat-exchangers

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    41. Boomsma, K; Poulikakos, D
      On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    42. Luo, X; Roetzel, W
      The single-blow transient testing technique for plate-fin heat exchangers

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    43. Luo, X; Roetzel, W; Ludersen, U
      The single-blow transient testing technique considering longitudinal core conduction and fluid dispersion

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    44. Mikkanen, P; Jokiniemi, JK; Kauppinen, EI; Vakkilainen, EK
      Coarse ash particle characteristics in a pulp and paper industry chemical recovery boiler

      FUEL
    45. Darve, C; Casas, J
      Measurements of temperature on LHC thermal models

      CRYOGENICS
    46. Morgan-Hughes, NJ; Mills, GH; Northwood, D
      Air flow resistance of three heat and moisture exchanging filter designs under wet conditions: implications for patient safety

      BRITISH JOURNAL OF ANAESTHESIA
    47. Ishiyama, S; Muto, Y; Tanihira, M; Ogata, K; Kamito, Y; Igari, T
      Development of the compact heat exchanger for the HTGR, (I) fabrication ofthe ultra fine off-set fin

      JOURNAL OF THE ATOMIC ENERGY SOCIETY OF JAPAN
    48. Enlund, M; Wiklund, L; Lambert, H
      A new device to reduce the consumption of a halogenated anaesthetic agent

      ANAESTHESIA
    49. Neti, S; Wolfe, EI
      Measurements of effectiveness in a silica gel rotary exchanger

      APPLIED THERMAL ENGINEERING
    50. Strelow, O
      A general calculation method for plate heat exchangers

      INTERNATIONAL JOURNAL OF THERMAL SCIENCES
    51. Mohr, U; Gelbe, H
      Velocity distribution and vibration excitation in tube bundle heat exchangers

      INTERNATIONAL JOURNAL OF THERMAL SCIENCES
    52. Wang, CC
      Technology review - A survey of recent patents of fin-and-tube heat exchangers

      JOURNAL OF ENHANCED HEAT TRANSFER
    53. Mandler, JA
      Modelling for control analysis and design in complex industrial separationand liquefaction processes

      JOURNAL OF PROCESS CONTROL
    54. Wang, CC; Webb, RL; Chi, KY
      Data reduction for air-side performance of fin-and-tube heat exchangers

      EXPERIMENTAL THERMAL AND FLUID SCIENCE
    55. Aime, ML; Maffezzoni, C
      Modelling and simulation of combined lumped and distributed systems by an object-oriented approach

      MATHEMATICS AND COMPUTERS IN SIMULATION
    56. Matko, D; Skrjanc, I; Music, G
      Robustness of fuzzy control and its application to a thermal plant

      MATHEMATICS AND COMPUTERS IN SIMULATION
    57. Nafey, AS
      Maximum entropy generation of in-series connected heat exchangers

      INTERNATIONAL JOURNAL OF ENERGY RESEARCH
    58. Bishop, A
      Weld repairs to high-pressure feed/effluent heat exchangers

      INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    59. Mehrabian, MA; Poulter, R
      Hydrodynamics and thermal characteristics of corrugated channels: computational approach

      APPLIED MATHEMATICAL MODELLING
    60. Konstantinidis, E; Castiglia, D; Balabani, S; Yianneskis, M
      On the flow and vortex shedding characteristics of an in-line tube bundle in steady and pulsating crossflow

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    61. Muralikrishna, K; Shenoy, UV
      Heat exchanger design targets for minimum area and cost

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    62. Prasad, VS; Das, SK
      Temperature response of a single blow regenerator using axially dispersivethermal wave of finite propagation velocity - analysis and experiment

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    63. Lona, LMF; Fernandes, FAN; Rogue, MC; Rodrigues, S
      Developing an educational software for heat exchangers and heat exchanger networks projects

      COMPUTERS & CHEMICAL ENGINEERING
    64. Acharya, S; Hibbs, RG; Chen, Y; Nikitopoulos, DE
      Mass/heat transfer in a ribbed passage with cylindrical vortex generators:The effect of generator-rib spacing

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    65. Bejan, A
      From heat transfer principles to shape and structure in nature: Constructal theory

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    66. Hsieh, SS; Huang, IW
      Heat transfer and pressure drop of laminar flow in horizontal tubes with/without longitudinal inserts

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    67. Gulyani, BB
      Estimating number of shells in shell and tube heat exchangers: A new approach based on temperature cross

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    68. Kim, SY; Paek, JW; Kang, BH
      Flow and heat transfer correlations for porous fin in a plate-fin heat exchanger

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    69. Kumar, KP; Venkatarathnam, G
      Optimization of matrix heat exchanger geometry

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    70. Grigoriu, M
      A Monte Carlo solution at heat conduction and Poisson equations

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    71. Kobus, CJ; Wedekind, GL; Bhatt, BL
      Predicting the influence of compressibility and thermal and flow distribution asymmetry on the frequency-response characteristics of multitube two-phase condensing flow systems

      JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
    72. Wang, CC; Chi, KY
      Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part I: new experimental data

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    73. Wang, CC; Chi, KY; Chang, CJ
      Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    74. Chang, YJ; Hsu, KC; Lin, YT; Wang, CC
      A generalized friction correlation for louver fin geometry

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    75. Fisher, TS; Torrance, KE
      Constrained optimal duct shapes for conjugate laminar forced convection

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    76. Fabbri, G
      Effect of disuniformities in vapor saturation pressure and coolant velocity on vapor back flow phenomena in single-pass air-cooled condensers

      INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
    77. Gupta, P; Atrey, MD
      Performance evaluation of counter flow heat exchangers considering the effect of heat in leak and longitudinal conduction for low-temperature applications

      CRYOGENICS
    78. Kundu, B; Das, PK
      Performance of symmetric polygonal fins with and without tip loss - A comparison of different methods of prediction

      CANADIAN JOURNAL OF CHEMICAL ENGINEERING
    79. Rose, IC; Watkinson, AP; Epstein, N
      Testing a mathematical model for initial chemical reaction fouling using adilute protein solution

      CANADIAN JOURNAL OF CHEMICAL ENGINEERING
    80. Basset, M; McInerney, J; Arbeau, N; Lister, DH
      The fouling of alloy-800 heat exchange surfaces by magnetite particles

      CANADIAN JOURNAL OF CHEMICAL ENGINEERING
    81. Wills, A; Bott, TR; Gibbard, IJ
      The control of biofilms in tubes using wire-wound inserts

      CANADIAN JOURNAL OF CHEMICAL ENGINEERING
    82. Da Fonseca, JMG; Wheeler, DW; Pook, JAR
      The effect of a heat and moisture exchanger on gas flow in a Mapleson F breathing system during inhalational induction

      ANAESTHESIA
    83. Iotti, GA; Olivei, MC; Braschi, A
      Mechanical effects of heat-moisture exchangers in ventilated patients

      CRITICAL CARE
    84. Jolly, AJ; O'Doherty, T; Bates, CJ
      COHEX: a computer model for solving the thermal energy exchange in an ultra high temperature heat exchanger. Part B: validation and results

      APPLIED THERMAL ENGINEERING
    85. Ong, KS; Haider-E-Alalhi, M
      Experimental investigation on the hysteresis effect in vertical two-phase closed thermosyphons

      APPLIED THERMAL ENGINEERING
    86. Taylor, RP; Hodge, BK; James, CA
      Estimating uncertainty in thermal systems analysis and design

      APPLIED THERMAL ENGINEERING
    87. Mulholland, AJ; Gomatam, J; Jenkins, AM
      Modelling high temperature salt condensation; Fick and Sorer diffusion effects

      INTERNATIONAL JOURNAL OF THERMAL SCIENCES
    88. Wang, CC; Lee, CJ; Chang, CT; Chang, YJ
      Some aspects of plate fin-and-tube heat exchangers: With and without louvers

      JOURNAL OF ENHANCED HEAT TRANSFER
    89. Ravigururajan, TS; Drost, MK
      Single-phase flow thermal performance characteristics of a parallel microchannel heat exchanger

      JOURNAL OF ENHANCED HEAT TRANSFER
    90. Shah, RK; Zhou, SQ; Tagavi, KA
      The role of surface tension in film condensation in extended surface passages

      JOURNAL OF ENHANCED HEAT TRANSFER
    91. Balle, P
      Fuzzy-model-based parity equations for fault isolation

      CONTROL ENGINEERING PRACTICE
    92. Sobrinho, MAD
      Comparative substitution of butane by hydrogen oxygen mixture in a domestic room heating convector

      RENEWABLE ENERGY
    93. Tagliafico, LA; Fossa, M
      Liquid sheet radiators for space power systems

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING
    94. Yao, XX; Sandstrom, R; Stenqvist, T
      Strain-controlled fatigue of a braze clad Al-Mn-Mg alloy at room temperature and at 75 and 180 degrees C

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    95. Springer, ME; Thole, KA
      Entry region of louvered fin heat exchangers

      EXPERIMENTAL THERMAL AND FLUID SCIENCE
    96. Dzialowski, EM; O'Connor, MP
      Utility of blood flow to the appendages in physiological control of heat exchange in reptiles

      JOURNAL OF THERMAL BIOLOGY
    97. Takemoto, T; Crittenden, BD; Kolaczkowski, ST
      Interpretation of fouling data in industrial shell and tube heat exchangers

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    98. Kho, T; Muller-Steinhagen, H
      An experimental and numerical investigation of heat transfer fouling and fluid flow in flat plate heat exchangers

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    99. Aicher, T; Martin, H; Polt, A
      Rayleigh-Benard convection in vertical shell and tube heat exchangers

      CHEMICAL ENGINEERING AND PROCESSING
    100. Naik, S; Probert, SD; Bryden, IG
      Heat transfer characteristics of shrouded longitudinal ribs in turbulent forced convection

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 06/06/20 alle ore 01:36:43