Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'glassy polymers' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 514 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Tijssens, MGA; van der Giessen, E
      A possible mechanism for cross-tie fibril generation in crazing of amorphous polymers

      POLYMER
    2. Chabert, E; Langroudi, AE; Gauthier, C; Perez, J
      Mechanical response of amorphous and semicrystalline poly(ethylene terephthalate) and modelling in frame of quasi point defect theory

      PLASTICS RUBBER AND COMPOSITES
    3. Lu, H; Tan, G; Chen, W
      Modeling of constitutive behavior for epon 828/T-403 at high strain rates

      MECHANICS OF TIME-DEPENDENT MATERIALS
    4. Wessling, M; Lopez, ML; Strathmann, H
      Accelerated plasticization of thin-film composite membranes used in gas separation

      SEPARATION AND PURIFICATION TECHNOLOGY
    5. Govaert, LE; Schellens, HJ; Thomassen, HJM; Smit, RJM; Terzoli, L; Peijs, T
      A micromechanical. approach to time-dependent failure in off-axis loaded polymer composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    6. Klopffer, MH; Flaconneche, B
      Transport properties of gases in polymers: Bibliographic review

      OIL & GAS SCIENCE AND TECHNOLOGY-REVUE DE L INSTITUT FRANCAIS DU PETROLE
    7. Kuo, WJ; Hsiue, GH; Jeng, RJ
      All organic NLO sol-gel material containing a one-dimensional carbazole chromophore

      MACROMOLECULAR CHEMISTRY AND PHYSICS
    8. Volynskii, AL; Lebedeva, OV; Bazhenov, SL; Bakeev, NF
      Effect of the physical state of amorphous poly(ethylene terephthalate) on the mechanism of fracture of a thin metallic coating

      POLYMER SCIENCE SERIES A
    9. Heatley, F; Karali, A; Dais, P
      An investigation of H-1 and C-13 longitudinal relaxation and relaxation inthe rotating frame in solid poly(N-vinylcarbazole)

      POLYMER INTERNATIONAL
    10. Drozdov, AD
      A model of traps for yield in amorphous glassy polymers

      ARCHIVE OF APPLIED MECHANICS
    11. Drozdov, AD; Dorfmann, A
      The stress-strain response and ultimate strength of filled elastomers

      COMPUTATIONAL MATERIALS SCIENCE
    12. Drozdov, AD
      Physical aging and nonlinear viscoelasticity of amorphous glassy polymers

      COMPUTATIONAL MATERIALS SCIENCE
    13. G'Sell, C
      Dislocations in glassy polymers do they exist? Are they useful?

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    14. Drozdov, AD
      Modelling nonlinear viscoelasticity and damage in amorphous glassy polymers

      MATHEMATICAL AND COMPUTER MODELLING
    15. Lee, SS; Cho, K; Kim, J
      Effect of ionic additives on deformation behavior of bisphenol A polycarbonate

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    16. Bonagamba, TJ; Becker-Guedes, F; DeAzevedo, ER; Schmidt-Rohr, K
      Slow ester side-group flips in glassy poly(alkyl methacrylate)s characterized by centerband-only detection of exchange nuclear magnetic resonance

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    17. Fond, C
      Cavitation criterion for rubber materials: A review of void-growth models

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    18. Vrentas, JS; Vrentas, CM
      Viscoelastic diffusion

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    19. Taveira, P; Cruz, P; Mendes, A; Costa, C; Magalhaes, F
      Considerations on the performance of hollow-fiber modules with glassy polymeric membranes

      JOURNAL OF MEMBRANE SCIENCE
    20. Frigione, M; Naddeo, C; Acierno, D
      Cold-curing epoxy resins: Aging and environmental effects. I - Thermal properties

      JOURNAL OF POLYMER ENGINEERING
    21. Lim, AR; Novak, BM
      Helix conformation in helical polycarbodiimides studied by solid state C-13 NMR

      CHEMICAL PHYSICS
    22. Narasimhan, B
      Mathematical models describing polymer dissolution: consequences for drug delivery

      ADVANCED DRUG DELIVERY REVIEWS
    23. Quaglia, F; Varricchio, G; Miro, A; La Rotonda, MI; Larobina, D; Mensitieri, G
      Modulation of drug release from hydrogels by using cyclodextrins: the caseof nicardipine/beta-cyclodextrin system in crosslinked polyethylenglycol

      JOURNAL OF CONTROLLED RELEASE
    24. Socrate, S; Boyce, MC; Lazzeri, A
      A micromechanical model for multiple crazing in high impact polystyrene

      MECHANICS OF MATERIALS
    25. Patel, MP; Johnstone, MB; Hughes, FJ; Braden, M
      The effect of two hydrophilic monomers on the water uptake of a heterocyclic methacrylate system

      BIOMATERIALS
    26. Tang, CY; Peng, LH; Li, CC; Shen, W; Tsui, CP
      Experimental study on stable growth of crack and craze damage in HIPS under tension at room temperature

      POLYMER TESTING
    27. Edwards, DA
      A spatially nonlocal model for polymer-penetrant diffusion

      ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK
    28. Pressly, TG; Keskkula, H; Paul, DR
      Temperature dependence of the fracture behavior of nylon 6/ABS blends

      POLYMER
    29. Robertson, CG; Wilkes, GL
      Physical aging behavior of miscible blends of poly(methyl methacrylate) and poly(styrene-co-acrylonitrile)

      POLYMER
    30. Hsieh, HC; Yang, TJ; Lee, S
      Crack healing in poly(methyl methacrylate) induced by co-solvent of methanol and ethanol

      POLYMER
    31. Govaert, LE; van Melick, HGH; Meijer, HEH
      Temporary toughening of polystyrene through mechanical pre-conditioning

      POLYMER
    32. Wilbrink, MWL; Argon, AS; Cohen, RE; Weinberg, M
      Toughenability of Nylon-6 with CaCO3 filler particles: new findings and general principles

      POLYMER
    33. Plummer, CJG; Goldberg, A; Ghanem, A
      Micromechanisms of slow crack growth in polyethylene under constant tensile loading

      POLYMER
    34. Tonge, MP; Gilbert, RG
      Testing models for penetrant diffusion in glassy polymers

      POLYMER
    35. Hirai, Y; Ishikuro, J; Nakajima, T
      Some comments on the penetration of water vapor into regenerated silk fibroin

      POLYMER
    36. Chen, JL; Xue, G; Li, YH; Wang, L; Tian, GH
      Conformation and structural relaxation of partially disentangled poly(vinyl chloride) prepared by freeze-extracting dilute solutions

      MACROMOLECULES
    37. Sanopoulou, M; Petropoulos, JH
      Systematic analysis and model interpretation of micromolecular non-Fickiansorption kinetics in polymer films

      MACROMOLECULES
    38. Krause, B; Mettinkhof, R; van der Vegt, NFA; Wessling, M
      Microcellular foaming of amorphous high-T-g polymers using carbon dioxide

      MACROMOLECULES
    39. Wang, HL; Kao, HM; Digar, M; Wen, TC
      FTIR and solid state C-13 NMR studies on the interaction of lithium cations with polyether poly(urethane urea)

      MACROMOLECULES
    40. Moreno, AJ; Alegria, A; Colmenero, J; Frick, B
      Methyl group dynamics in poly(methyl methacrylate): From quantum tunnelingto classical hopping

      MACROMOLECULES
    41. Brown, HR
      Relation between the width of an interface between two polymers and its toughness

      MACROMOLECULES
    42. Lu, J; Mirau, PA; Tonelli, AE
      Dynamics of isolated polycaprolactone chains in their inclusion complexes with cyclodextrins

      MACROMOLECULES
    43. Kim, SD; Suwanmala, P; Klein, A; Sperling, LH
      Molecular basis of fracture of latex blends of polystyrene and poly(methylmethacrylate)

      JOURNAL OF MATERIALS SCIENCE
    44. Ruvolo, A; Boesel, LF; Pessan, LA
      Annealing time and temperature effects on sorption properties of dichloromethane in hexafluorobisphenol-A-based polyesters

      JOURNAL OF MACROMOLECULAR SCIENCE-PHYSICS
    45. Drozdov, AD
      The effect of temperature on physical aging of classy polymers

      JOURNAL OF APPLIED POLYMER SCIENCE
    46. Li, ZH; Lambros, J
      Strain rate effects on the thermomechanical behavior of polymers

      INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
    47. Pijnenburg, KGW; Van der Giessen, E
      Macroscopic yield in cavitated polymer blends

      INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
    48. Cangialosi, D; Lindsay, C; McGrail, PT; Spadaro, G
      Study of methyl methacrylate polymerization in the presence of rubbers

      EUROPEAN POLYMER JOURNAL
    49. Kirchheim, R
      Solubility of gases in vitreous silica described by a distribution of dissolution energies

      JOURNAL OF THE AMERICAN CERAMIC SOCIETY
    50. Bos, A; Punt, I; Strathmann, H; Wessling, M
      Suppression of gas separation membrane plasticization by homogeneous polymer blending

      AICHE JOURNAL
    51. Malek, J; Shanelova, J
      Structural relaxation in amorphous solids studied by thermal analysis methods

      JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
    52. Li, Z; Lambros, J
      Dynamic thermomechanical behavior of fiber reinforced composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    53. Zerilli, FJ; Armstrong, RW
      Thermal activation based constitutive equations for polymers

      JOURNAL DE PHYSIQUE IV
    54. Yu, TL; Chen, YS
      Physical aging of epoxy resin blended with poly(ether sulfone): Effect of poly(ether sulfone) molecular weight

      JOURNAL OF POLYMER RESEARCH-TAIWAN
    55. Quijada-Garrido, I; de Velasco-Ruiz, MF; Barrales-Rienda, JM
      Fickian diffusion of erucamide (13-cis-docosenamide) in poly(laurolactam) (Nylon 12) (PA-12)

      MACROMOLECULAR CHEMISTRY AND PHYSICS
    56. Hsiue, GH; Kuo, WJ; Lin, CH; Jeng, RJ
      Preparation and characterization of all organic NLO sol-gel materials based on amino azobenzene dyes

      MACROMOLECULAR CHEMISTRY AND PHYSICS
    57. Samyn, C; Verbiest, T; Persoons, A
      Second-order non-linear optical polymers

      MACROMOLECULAR RAPID COMMUNICATIONS
    58. Carini, G; D'Angelo, G; Tripodo, G; Bartolatta, A; Di Marco, G; Privalko, VP
      Anharmonicity and fragility in semi-interpenetrating polymer networks

      JOURNAL OF PHYSICS-CONDENSED MATTER
    59. Chau, CC; LaFollette, WR
      Shear yielding in blown oriented polystyrene films

      ADVANCED MATERIALS
    60. Drozdov, AD
      Physical aging in amorphous polymers near the glass transition point

      COMPUTATIONAL MATERIALS SCIENCE
    61. Davey, MH; Lee, VY; Wu, LM; Moylan, CR; Volksen, W; Knoesen, A; Miller, RD; Marks, TJ
      Ultrahigh-temperature polymers for second-order nonlinear optics. Synthesis and properties of robust, processable, chromophore-embedded polyimides

      CHEMISTRY OF MATERIALS
    62. Drozdov, AD
      Modelling structural recovery in amorphous polymers

      MATHEMATICAL AND COMPUTER MODELLING
    63. Inoue, T; Onogi, T; Osaki, K
      Dynamic birefringence of oligostyrene: A symptom of "polymeric" mode

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    64. Chou, KF; Han, CC; Lee, S
      Water transport in 2-hydroxyethyl methacrylate copolymer irradiated by gamma rays in air and related phenomena

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    65. Imamura, Y; Yamaguchi, Y; Tran-Cong, Q
      Polarized light-induced photoisomerization in glassy poly(methyl methacrylate) and local relaxation processes of the polymer matrix

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    66. Wang, HY; Ugomori, T; Tanaka, K; Kita, H; Okamoto, K; Suma, Y
      Sorption and pervaporation properties of sulfonyl-containing polyimide membrane to aromatic/non-aromatic hydrocarbon mixtures

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    67. Merkel, TC; Bondar, V; Nagai, K; Freeman, BD
      Sorption and transport of hydrocarbon and perfluorocarbon gases in poly(1-trimethylsilyl-1-propyne)

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    68. Kamaruddin, HD; Koros, WJ
      Sorption of methanol/MTBE and diffusion of methanol in 6FDA-ODA polyimide

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    69. Jelinski, LW; Melchior, MT
      High-resolution NMR of solids (Reprinted from NMR Spectroscopy Techniques,Second Edition, Revised and Expanded, pg 417-485, 1996)

      APPLIED SPECTROSCOPY REVIEWS
    70. Ravi-Chandar, K; Lu, J; Yang, B; Zhu, Z
      Failure mode transitions in polymers under high strain rate loading

      INTERNATIONAL JOURNAL OF FRACTURE
    71. Chen, SH; Huang, SL; Yu, KC; Lai, JY; Liang, MT
      Effect of CO2 treated polycarbonate membranes on gas transport and sorption properties

      JOURNAL OF MEMBRANE SCIENCE
    72. Grassi, M; Colombo, I; Lapasin, R
      Drug release from an ensemble of swellable crosslinked polymer particles

      JOURNAL OF CONTROLLED RELEASE
    73. Tijssens, MGA; van der Giessen, E; Sluys, LJ
      Modeling of crazing using a cohesive surface methodology

      MECHANICS OF MATERIALS
    74. Govaert, LE; Timmermans, PHM; Brekelmans, WAM
      The influence of intrinsic strain softening on strain localization in polycarbonate: Modeling and experimental validation

      JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
    75. Godfrey, TA
      A thermomechanical instability in the high rate extension of textile fibers

      TEXTILE RESEARCH JOURNAL
    76. Walley, SM; Proud, WG; Rae, PJ; Field, JE
      Comparison of two methods of measuring the rapid temperature rises in split Hopkinson bar specimens

      REVIEW OF SCIENTIFIC INSTRUMENTS
    77. Liu, WJ; Shen, JS; Lu, FC; Xu, M
      Tensile crazing and thermal history of polyphenylquinoxaline films

      POLYMER JOURNAL
    78. Inoue, T; Fujiwara, K; Ryu, DS; Osaki, K; Fuji, M; Sakurai, K
      Viscoelasticity and birefringence of low birefringent polyesters

      POLYMER JOURNAL
    79. Fesko, DG
      Thermal cycling of plastics - Relaxation and set in polycarbonate and polypropylene

      POLYMER ENGINEERING AND SCIENCE
    80. Fesko, DG
      Post-yield behavior of thermoplastics and the application to finite element analysis

      POLYMER ENGINEERING AND SCIENCE
    81. Chou, KF; Han, CC; Lee, S
      Water transport in crosslinked 2-hydroxyethyl methacrylate

      POLYMER ENGINEERING AND SCIENCE
    82. Chou, KF; Lee, S
      The effect of calcium chloride dihydrate on the optical properties and mass transport of methanol in poly(methyl methacrylate)

      POLYMER ENGINEERING AND SCIENCE
    83. Chou, KF; Lee, S
      The mass transport of methanolic ferric chloride hexahydrate solution in poly(methyl methacrylate) and related optical properties

      POLYMER
    84. Pegoretti, A; Guardini, A; Migliaresi, C; Ricco, T
      Recovery of post-yielding deformations in semicrystalline poly(ethylene-terephthalate)

      POLYMER
    85. Foldes, E; Fekete, E; Karasz, FE; Pukanszky, B
      Interaction, miscibility and phase inversion in PBI/PI blends

      POLYMER
    86. Marissen, R
      Craze growth mechanics

      POLYMER
    87. Passade, N; Creton, C; Gallot, Y
      Fracture toughness of interfaces between glassy polymers in a trilayer geometry

      POLYMER
    88. Rajagopalan, G; Narayanan, C; Gillespie, JW; McKnight, SH
      Diffusion and reaction of epoxy and amine in polysulfone-transport modeling and experimental validation

      POLYMER
    89. Boom, JP; Sanopoulou, M
      Interval sorption kinetics in the system poly(methyl methacrylate)-methyl acetate

      POLYMER
    90. Adams, AM; Buckley, CP; Jones, DP
      Biaxial hot drawing of poly(ethylene terephthalate): measurements and modelling of strain-stiffening

      POLYMER
    91. Qian, T; Taylor, PL
      From the Thomas-Windle model to a phenomenological description of Case-II diffusion in polymers

      POLYMER
    92. Cameron, NR; Cowie, JMG; Ferguson, R; McEwan, I
      Enthalpy relaxation of styrene-maleic anhydride (SMA) copolymers Part 1. Single component systems

      POLYMER
    93. Bohm, I; Brion, HG; Kirchheim, R
      Effect of dissolved small molecules on the mechanical relaxation behavior of polycarbonate

      POLYMER
    94. Karger-Kocsis, J; Moskala, EJ
      Molecular dependence of the essential and non-essential work of fracture of amorphous films of poly(ethylene-2,6-naphthalate) (PEN)

      POLYMER
    95. Tonge, MP; Stubbs, JM; Sundberg, DC; Gilbert, RG
      Penetrant diffusion in poly(methyl methacrylate) near T-g: dependence on temperature and polymer weight fraction

      POLYMER
    96. van der Vegt, NFA
      Temperature dependence of gas transport in polymer melts: Molecular dynamics simulations of CO2 in polyethylene

      MACROMOLECULES
    97. Tanaka, K; Kawai, T; Kita, H; Okamoto, K; Ito, Y
      Correlation between gas diffusion coefficient and positron annihilation lifetime in polymers with rigid polymer chains

      MACROMOLECULES
    98. Kuboki, T; Ben Jar, PY; Takahashi, K; Shinmura, T
      Observation of "black" and "white" crazes in high-impact polystyrene undertransmission electron microscopy

      MACROMOLECULES
    99. Adriaensens, P; Storme, L; Carleer, R; Vanderzande, D; Gelan, J; Litvinov, VM; Marissen, R
      Visualization of tensile stress induced material response at a crack tip in polymers under critical load by NMR imaging

      MACROMOLECULES
    100. Kondo, T; Yoshii, K; Horie, K; Itoh, M
      Photoprobe study of siloxane polymers. 3. Local free volume of polymethylsilsesquioxane probed by photoisomerization of azobenzene

      MACROMOLECULES


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 09/08/20 alle ore 02:07:51