Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'finite element analysis' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 2285 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Mines, RAW; Alias, A
      Numerical simulation of the progressive collapse of polymer composite sandwich beams under static loading

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    2. Barton, EN; Ogin, SL; Thorne, AM; Reed, GT
      Optimisation of the coating of a fibre optical sensor embedded in a cross-ply GFRP laminate

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    3. Yoo, C
      Finite-element analysis of tunnel face reinforced by longitudinal pipes

      COMPUTERS AND GEOTECHNICS
    4. Edwards, ME; Wang, SSS; Good, TA
      Role of viscoelastic properties of differentiated SH-SY5Y human neuroblastoma cells in cyclic shear stress injury

      BIOTECHNOLOGY PROGRESS
    5. Andrews, RM; Garwood, SJ
      An analysis of fracture under biaxial loading using the non-singular T-stress

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    6. Li, Q; Steven, GP; Xie, YM
      A simple checkerboard suppression algorithm for evolutionary structural optimization

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    7. Oztura, H; Akpinar, E
      Modeling and analysis of a two-phase permanent magnet brushless motor

      ELECTRIC POWER COMPONENTS AND SYSTEMS
    8. Muller-Karger, CM; Gonzalez, C; Aliabadi, MH; Cerrolaza, M
      Three dimensional BEM and FEM stress analysis of the human tibia under pathological conditions

      CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
    9. Le Van, A; Le Grognec, P
      Modeling and numerical computation of necking in round bars using a total Lagrangian elastoplastic formulation

      CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
    10. Boyer, L
      Contact resistance calculations: Generalizations of Greenwood's formula including interface films

      IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    11. Moore, TD; Jarvis, JL
      Failure analysis and stress simulation in small multichip BGAs

      IEEE TRANSACTIONS ON ADVANCED PACKAGING
    12. Yang, KH; Im, JH; Heistand, RH
      Significance of coating stress on substrate bow in large area processing of MCM

      IEEE TRANSACTIONS ON ADVANCED PACKAGING
    13. Jenkins, MG; Mark, KY
      Finite element analysis model of the cumulative damage failure process in a continuous-fibre ceramic composite loaded in flexure

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    14. Akisanya, AR; Hitchcock, GR; Thompson, DS
      The deformation of a dual-elastomer seal

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    15. Chawla, N; Shen, YL
      Mechanical behavior of particle reinforced metal matrix composites

      ADVANCED ENGINEERING MATERIALS
    16. Lu, WT; Carlsson, LA
      Influence of viscoelastic behavior on curl of paper

      MECHANICS OF TIME-DEPENDENT MATERIALS
    17. Van Paepegem, W; Degrieck, J; De Baets, P
      Finite element approach for modelling fatigue damage in fibre-reinforced composite materials

      COMPOSITES PART B-ENGINEERING
    18. Luo, RK; Green, ER; Morrison, CJ
      An approach to evaluate the impact damage initiation and propagation in composite plates

      COMPOSITES PART B-ENGINEERING
    19. Boisse, P; Gasser, A; Poirier, J; Rousseau, J
      Simulations of thermomechanical behavior of composite refractory linings

      COMPOSITES PART B-ENGINEERING
    20. Hohe, J; Becker, W
      An energetic homogenisation procedure for the elastic properties of general cellular sandwich cores

      COMPOSITES PART B-ENGINEERING
    21. Kwon, YW; Liu, CT
      Effect of particle distribution on initial cracks forming from notch tips of composites with hard particles embedded in a soft matrix

      COMPOSITES PART B-ENGINEERING
    22. Carvelli, V; Panzeri, N; Poggi, C
      Buckling strength of GFRP under-water vehicles

      COMPOSITES PART B-ENGINEERING
    23. Ng, SP; Tse, PC; Lau, KJ
      Progressive failure analysis of 2/2 twill weave fabric composites with moulded-in circular hole

      COMPOSITES PART B-ENGINEERING
    24. van Vuure, AW; Verpoest, I; Ko, FK
      Sandwich-fabric panels as spacers in a constrained layer structural damping application

      COMPOSITES PART B-ENGINEERING
    25. Besant, T; Davies, GAO; Hitchings, D
      Finite element modelling of low velocity impact of composite sandwich panels

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    26. Falzon, BG
      The behaviour of damage tolerant hat-stiffened composite panels loaded in uniaxial compression

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    27. Meniconi, LCM; Reid, SR; Soden, PD
      Preliminary design of composite riser stress joints

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    28. Blake, JIR; Shenoi, RA; House, J; Turton, T
      Progressive damage analysis of tee joints with viscoelastic inserts

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    29. Chandra, N; Ghonem, H
      Interfacial mechanics of push-out tests: theory and experiments

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    30. Knox, EM; Lafferty, S; Cowling, MJ; Hashim, SA
      Design guidance and structural integrity of bonded connections in CRE pipes

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    31. Govaert, LE; Schellens, HJ; Thomassen, HJM; Smit, RJM; Terzoli, L; Peijs, T
      A micromechanical. approach to time-dependent failure in off-axis loaded polymer composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    32. Boisse, P; Gasser, A; Hivet, G
      Analyses of fabric tensile behaviour: determination of the biaxial tension-strain surfaces and their use in forming simulations

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    33. Carvelli, V; Poggi, C
      A homogenization procedure for the numerical analysis of woven fabric composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    34. Van Paepegem, W; Degrieck, J
      Fatigue degradation modelling of plain woven glass/epoxy composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    35. Jacobsen, TK; Sorensen, BF
      Mode I intra-laminar crack growth in composites - modelling of R-curves from measured bridging laws

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    36. Krueger, R; O'Brien, TK
      A shell/3D modeling technique for the analysis of delaminated composite laminates

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    37. Shlyannikov, VN; Iltchenko, BV; Stapanov, NV
      Fracture analysis of turbine disks and computational-experimental background of the operational decisions

      ENGINEERING FAILURE ANALYSIS
    38. Cao, YQ
      Failure analysis of exit edges in ceramic machining using finite element analysis

      ENGINEERING FAILURE ANALYSIS
    39. Kocabicak, U; Firat, M
      Numerical analysis of wheel cornering fatigue tests

      ENGINEERING FAILURE ANALYSIS
    40. Neves, LAC; Cruz, PJS; Henriques, AAR
      Reliability analysis of steel connection components based on FEM

      ENGINEERING FAILURE ANALYSIS
    41. Sueyoshi, H; Nishida, T
      Solid state bonding of graphite to inconel 718

      MATERIALS TRANSACTIONS
    42. Chang, LT; Chang, CH; Chang, GL
      Fit effect of motorcycle helmet - A finite element modeling

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    43. Zhao, T; Ma, HR
      Column size effects of DER fluids

      EUROPEAN PHYSICAL JOURNAL E
    44. Cho, CD; Ahn, S
      Thermo-elastic analysis for chattering phenomenon of automotive disk brake

      KSME INTERNATIONAL JOURNAL
    45. Lim, KH; Bull, JW; Kim, HK
      Finite elements adding and removing method for two-dimensional shape optimal design

      KSME INTERNATIONAL JOURNAL
    46. Sur, U
      Development of a numerical methodology for analysis and design of weldments

      KSME INTERNATIONAL JOURNAL
    47. Kim, C; Yang, WH; Heo, SP
      Influence of inclined holes in measurement of residual stress by the hole drilling method

      KSME INTERNATIONAL JOURNAL
    48. Shin, JG; Lee, JH; Kim, YI; Yim, H
      Mechanics-based determination of the center roller displacement in three-roll bending for smoothly curved rectangular plates

      KSME INTERNATIONAL JOURNAL
    49. Ohga, M; Takaue, A; Shigematsu, T; Hara, T
      Effects of initial imperfections on nonlinear behaviors of thin-walled members

      STRUCTURAL ENGINEERING AND MECHANICS
    50. Shen, SJ; Pfister, JC; Lee, JD
      Stress wave propagation in composite materials

      STRUCTURAL ENGINEERING AND MECHANICS
    51. Shuraim, AB
      A variable layering system for nonlinear analysis of reinforced concrete plane frames

      STRUCTURAL ENGINEERING AND MECHANICS
    52. Foley, CM
      Advanced analysis of steel frames using parallel processing and vectorization

      COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING
    53. Katti, DR; Katti, KS; Sopp, JM; Sarikaya, M
      3D finite element modeling of mechanical response in nacre-based hybrid nanocomposites

      COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE
    54. Powell, CA; Savage, MD
      Numerical simulation of transient free surface flow with moving contact lines

      COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING
    55. Kato, S; Kawahara, M
      The finite element analysis of interaction problem through water, soil, balloon and pile

      INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS
    56. Sharma, SC
      Elastic properties of short glass fiber-reinforced ZA-27 alloy metal matrix composites

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    57. Bowen, CR; Perry, A; Stevens, R; Mahon, S
      Analytical and numerical modelling of 3-3 piezoelectric composites

      INTEGRATED FERROELECTRICS
    58. Aubeny, CP; Murff, JD; Moon, SK
      Lateral undrained resistance of suction caisson anchors

      INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING
    59. Farinon, S; Fabbricatore, P; Gomory, F; Seiler, E
      Shielding and losses in multifilamentary tapes exposed to perpendicular ACmagnetic fields

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    60. Ishiyama, A; Asai, H
      A stability criterion for cryocooler-cooled HTS coils

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    61. Kikuma, T; Ishiyama, A
      Improvement of superconducting cylindrical linear induction motor

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    62. Ueda, H; Ishiyama, A; Kado, H; Ichikawa, M
      Thermal and magnetic characteristics of bulk superconductor and performance analysis of magnetic shielding type of superconducting fault current limiter

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    63. Tan, YC; Castanier, MP; Pierre, C
      Approximation of power flow between two coupled beams using statistical energy methods

      JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME
    64. Domen, JK; Domen, SR
      Studies of excess heat and convection in a water calorimeter

      JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
    65. Polsky, Y; Ume, IC
      Comparison of first-order shear and plane strain assumptions in warpage prediction of simply supported printed wiring boards

      JOURNAL OF ELECTRONIC PACKAGING
    66. Han, JB
      Flip-chip BGA design to avert die cracking

      JOURNAL OF ELECTRONIC PACKAGING
    67. Gupta, V; Roy, S; Dharani, LR
      Multi-scale modelling of long-term mechanical behaviour in polymer composite laminates with woven fibre architecture

      POLYMERS & POLYMER COMPOSITES
    68. Commend, S; Zimmermann, T
      Object-oriented nonlinear finite element programming: a primer

      ADVANCES IN ENGINEERING SOFTWARE
    69. de Lima, BSLP; Teixeira, EC; Ebecken, NFF
      Probabilistic and possibilistic methods for the elastoplastic analysis of soils

      ADVANCES IN ENGINEERING SOFTWARE
    70. Chapman, CB; Pinfold, M
      The application of a knowledge based engineering approach to the rapid design and analysis of an automotive structure

      ADVANCES IN ENGINEERING SOFTWARE
    71. Mackie, RI
      Implementation of sub-structuring within an object-oriented framework

      ADVANCES IN ENGINEERING SOFTWARE
    72. Buxton, GA; Care, CM; Cleaver, DJ
      A lattice spring model of heterogeneous materials with plasticity

      MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
    73. Nithiarasu, P
      A comparative study on the performance of two time stepping schemes for convection in a fluid saturated porous medium

      INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW
    74. Cattaneo, PM; Dalstra, M; Frich, LH
      A three-dimensional finite element model from computed tomography data: a semi-automated method

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
    75. Ng, EYK; Siauw, WL
      Unsteady viscous flow model on moving the domain through a stenotic artery

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
    76. Burguete, RL; Patterson, EA
      Comparison of numerical and experimental analyses for contact problems under normal and tangential loads

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING
    77. Lee, SU; Besant, CB
      Vibration analysis of a prototype of a small-scale high-speed generator for a hybrid electric vehicle

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
    78. Tse, PC; Reid, SR; Ng, SP
      Spring constants of filament-wound composite circular rings

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    79. Park, K; Lee, YK; Yang, DY; Lee, DH
      Design and analysis of hollow section extrusion of the underframe part of a railroad vehicle using mismatching refinement with domain decomposition

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    80. Hague, R; Dickens, PM
      Improvements in investment casting with stereolithography patterns

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    81. Wu, CML; Liu, JH; Yeung, NH
      The effects of bump height on the reliability of ACF in flip-chip

      SOLDERING & SURFACE MOUNT TECHNOLOGY
    82. Bozkus, H; Karakas, A; Hanci, M; Uzan, M; Bozdag, E; Sarioglu, AC
      Finite element model of the Jefferson fracture: comparison with a cadaver model

      EUROPEAN SPINE JOURNAL
    83. Pitzen, T; Geisler, FH; Matthis, D; Muller-Storz, H; Pedersen, K; Steudel, WI
      The influence of cancellous bone density on load sharing in human lumbar spine: a comparison between an intact and a surgically altered motion segment

      EUROPEAN SPINE JOURNAL
    84. Kreja, I; Schmidt, R; Weichert, D
      Modelling and FE-simulation of plastic ductile damage evolution in plates and shells

      ARCHIVE OF APPLIED MECHANICS
    85. Jiang, XY; Lauke, B; Beckert, W; Schuller, T
      Numerical simulation of micro-scratch tests for coating/substrate composites

      COMPOSITE INTERFACES
    86. Wilkins, T; Shen, YL
      Stress enhancement at inclusion particles in aluminum matrix composites: computational modeling and implications to fatigue damage

      COMPUTATIONAL MATERIALS SCIENCE
    87. Yue, ZF; Eggeler, G; Stockhert, B
      A creep finite element analysis of indentation creep testing in two phase microstructures (particle/matrix- and thin film/substrate-systems)

      COMPUTATIONAL MATERIALS SCIENCE
    88. Kiritsi, CC; Anifantis, NK
      Load carrying characteristics of short fiber composites containing a heterogeneous interphase region

      COMPUTATIONAL MATERIALS SCIENCE
    89. Lin, YC; Wu, WD
      Arrayed-electrode design for moving electric field driven capillary electrophoresis chips

      SENSORS AND ACTUATORS B-CHEMICAL
    90. Gibson, D; Carter, H; Purdy, C
      The use of hardware description languages in the development of microelectromechanical systems

      ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING
    91. Roh, Y; Lee, S; Han, W
      Design and fabrication of a new traveling wave-type ultrasonic linear motor

      SENSORS AND ACTUATORS A-PHYSICAL
    92. Kang, DC; Sun, HY; Chen, Y; Yang, HL
      Research on the "shear-extrusion" process to form large-scale cut-off valve bodies

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    93. MacCormack, C; Monaghan, J
      Failure analysis of cold forging dies using FEA

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    94. Rosochowski, A
      Die compensation procedure to negate die deflection and component springback

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    95. Mehta, BV; Al-Zkeri, I; Gunasekera, JS; Buijk, A
      3D flow analysis inside shear and streamlined extrusion dies for feeder plate design

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    96. Shih, CK; Hung, CH; Hsu, RQ
      The finite element analysis on planetary rolling process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    97. Kim, HS
      Finite element analysis of high pressure torsion processing

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    98. Kim, HS; Seo, MH; Hong, SI
      Plastic deformation analysis of metals during equal channel angular pressing

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    99. Huh, H; Lee, HW; Park, SR; Kim, GY; Nam, SH
      The parametric process design of tension levelling with an elasto-plastic finite element method

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    100. Kim, SH; Kim, SH; Huh, H
      Design modification in a multi-stage rectangular cup drawing process with a large aspect ratio by an elasto-plastic finite element analysis

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 26/10/20 alle ore 12:18:37