Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'factorial design' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 380 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Lucas-Girot, A; Langlois, P; Sangleboeuf, JC; Ouammou, A; Rouxel, T; Gaude, J
      A synthetic aragonite-based bioceramic: influence of process parameters onporosity and compressive strength

      BIOMATERIALS
    2. von Holst, C; Muller, A; Bjorklund, E; Anklam, E
      In-house validation of a simplified method for the determination of PCBs in food and feedingstuffs

      EUROPEAN FOOD RESEARCH AND TECHNOLOGY
    3. Masetto, A; Flores-Cotera, LB; Diaz, C; Langley, E; Sanchez, S
      Application of a complete factorial design for the production of zeaxanthin by Flavobacterium sp.

      JOURNAL OF BIOSCIENCE AND BIOENGINEERING
    4. Leroi, F; Joffraud, JJ; Chevalier, F; Cardinal, M
      Research of quality indices for cold-smoked salmon using a stepwise multiple regression of microbiological counts and physico-chemical parameters

      JOURNAL OF APPLIED MICROBIOLOGY
    5. Costa, AC; Atala, DIP; Maugeri, F; Maciel, R
      Factorial design and simulation for the optimization and determination of control structures for an extractive alcoholic fermentation

      PROCESS BIOCHEMISTRY
    6. Cheng, SW; Wu, CFJ
      Factor screening and response surface exploration

      STATISTICA SINICA
    7. Zhang, RC; Shao, Q
      Minimum aberration (S-2) Sn-k designs

      STATISTICA SINICA
    8. Morita, K; Kubota, K; Aishima, T
      Sensory characteristics and volatile components in aromas of boiled prawnsprepared according to experimental designs

      FOOD RESEARCH INTERNATIONAL
    9. Sayan, E; Bayramoglu, M
      Statistical modelling of sulphuric acid leaching of TiO2, Fe2O3 and Al2O3 from red mud

      PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
    10. Rueda, N; Bacaud, R; Lanteri, P; Vrinat, M
      Factorial design for the evaluation of the influence of preparation parameters upon the properties of dispersed molybdenum sulfide catalysts

      APPLIED CATALYSIS A-GENERAL
    11. Santos, WLF; Porto, MF; Muniz, EC; Povh, NP; Rubira, AF
      Incorporation of disperse dye in N,N-dimethylacrylamide modified poly(ethylene terephthalate) fibers with supercritical CO2

      JOURNAL OF SUPERCRITICAL FLUIDS
    12. Shukla, AA; Sorge, L; Boldman, J; Waugh, S
      Process characterization for metal-affinity chromatography of an Fc fusionprotein: a design-of-experiments approach

      BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY
    13. Kamimura, ES; Medieta, O; Rodrigues, MI; Maugeri, F
      Studies on lipase-affinity adsorption using response-surface analysis

      BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY
    14. Rambali, B; Baert, L; Jans, E; Massart, DL
      Influence of the roll compactor parameter settings and the compression pressure on the buccal bio-adhesive tablet properties

      INTERNATIONAL JOURNAL OF PHARMACEUTICS
    15. Sundberg, G
      Ranking factors of an investment in cogeneration: Sensitivity analysis ranking the technical and economical factors

      INTERNATIONAL JOURNAL OF ENERGY RESEARCH
    16. Minarro, M; Garcia-Montoya, E; Sune-Negre, JM; Tico, JR
      Study of formulation parameters by factorial design in metoprolol tartratematrix systems

      DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
    17. Rambali, B; Baert, L; Thone, D; Massart, DL
      Using experimental design to optimize the process parameters in fluidized bed granulation

      DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
    18. Sahoo, RN; Naik, PK; Das, SC
      Leaching of manganese from low-grade manganese ore using oxalic acid as reductant in sulphuric acid solution

      HYDROMETALLURGY
    19. Kalil, SJ; Suzan, R; Maugeri, F; Rodrigues, MI
      Optimization of inulinase production by Kluyveromyces marxianus using factorial design

      APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY
    20. Canettieri, EV; Silva, JBAE; Felipe, MGA
      Application of factorial design to the study of xylitol production from eucalyptus hemicellulosic hydrolysate

      APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY
    21. Soares, CMF; De Castro, HF; Santana, MHA; Zanin, GM
      Selection of stabilizing additive for lipase immobilization on controlled pore silica by factorial design

      APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY
    22. Khoo, LP; Chen, CH
      Integration of response surface methodology with genetic algorithms

      INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    23. Varshosaz, J; Keihanfar, M
      Development and evaluation of sustained-release propranolol wax microspheres

      JOURNAL OF MICROENCAPSULATION
    24. Opie, LH; Messerli, FH
      The choice of first-line therapy: combinations of an angiotensin rationalefor low-dose converting enzyme inhibitor and a diuretic

      JOURNAL OF HYPERTENSION
    25. Viswanathan, P; Surlikar, NR
      Production of alpha-amylase with Aspergillus flavus on Amaranthus grains by solid-state fermentation

      JOURNAL OF BASIC MICROBIOLOGY
    26. Case, J; Rice, A; Wood, J; Gaudry, L; Vowels, M; Nordon, RE
      Characterization of cytokine interactions by flow cytometry and factorial analysis

      CYTOMETRY
    27. da Silva, JBP; Ramos, MN
      Factorial design analysis of the effects of wave function modifications oninfrared intensity parameters

      JOURNAL OF MOLECULAR STRUCTURE-THEOCHEM
    28. Roca-Cusachs, A; Torres, F; Horas, M; Rios, T; Calvo, G; Delgadillo, J; Teran, M
      Nitrendipine and enalapril combination therapy in mild to moderate hypertension: Assessment of dose-response relationship by a clinical trial of factorial design

      JOURNAL OF CARDIOVASCULAR PHARMACOLOGY
    29. Vitt, SM; Himelbloom, BH; Crapo, CA
      Inhibition of Listeria innocua and L-monocytogenes in a laboratory medium and cold-smoked salmon containing liquid smoke

      JOURNAL OF FOOD SAFETY
    30. Martins, MH; De Paoli, MA
      Polypropylene compounding with recycled material I. Statistical response surface analysis

      POLYMER DEGRADATION AND STABILITY
    31. Duarte, MMMB; da Silva, JE; Passavante, JZD; Pimentel, MF; Neto, BD; da Silva, VL
      Macroalgae as lead trapping agents in industrial effluents - A factorial design analysis

      JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY
    32. Celeghini, EA; Celeghini, RMD; Lancas, FM
      Experimental variables and their effects on the liquefaction of cellulose from sugar cane bagasse

      ENERGY SOURCES
    33. Trinca, LA; Gilmour, SG
      Multistratum response surface designs

      TECHNOMETRICS
    34. Narayan, PM; Marchant, D; Wheatley, MA
      Optimization of spray drying by factorial design for production of hollow microspheres for ultrasound imaging

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    35. Chen, CH; Chen, CY; Lo, YW; Mao, CF; Liao, WT
      Studies of glycolysis of poly(ethylene terephthalate) recycled from postconsumer soft-drink bottles. II. Factorial experimental design

      JOURNAL OF APPLIED POLYMER SCIENCE
    36. Ronconi, CM; Pereira, EC
      Electrocatalytic properties of Ti/TiO2 electrodes prepared by the Pechini method

      JOURNAL OF APPLIED ELECTROCHEMISTRY
    37. Chepkwony, HK; Vermaelen, A; Roets, E; Hoogmartens, J
      Development and validation of an reversed-phase liquid chromatographic method for analysis of spiramycin and related substances

      CHROMATOGRAPHIA
    38. Carvalho, CML; Aires-Barros, MR; Cabral, JMS
      A continuous membrane bioreactor for ester synthesis in organic media: I. Operational characterization and stability

      BIOTECHNOLOGY AND BIOENGINEERING
    39. Tang, BX
      Theory of J-characteristics for fractional factorial designs and projection justification of minimum G(2)-aberration

      BIOMETRIKA
    40. Puu, G
      An approach for analysis of protein toxins based on thin films of lipid mixtures in an optical biosensor

      ANALYTICAL CHEMISTRY
    41. de Oliveira, MAL; Micke, GA; Bruns, RE; Tavares, MFM
      Factorial design of electrolyte systems for the separation of fatty acids by capillary electrophoresis

      JOURNAL OF CHROMATOGRAPHY A
    42. Chen, JG; Glancy, K; Chen, XH; Alasandro, M
      Investigation of pharmaceutical high-performance liquid chromatography assay bias using experimental design

      JOURNAL OF CHROMATOGRAPHY A
    43. Rhew, K; Ochs, CA
      Spatial patterns in autotrophic picoplankton abundance in a reservoir examined using microcosm experiments

      INTERNATIONAL REVIEW OF HYDROBIOLOGY
    44. Hirtopeanu, A; Suteu, C; Uncuta, C; Mihai, G; Roussel, C
      Bis(oxo/thioxothiazolinyl) aromatic compounds - Synthesis and conformational assignment

      EUROPEAN JOURNAL OF ORGANIC CHEMISTRY
    45. Franke, A; Gebauer, S; Franke, K; Brockow, T
      Acupuncture massage vs Swedish massage and individual exercises vs group exercises in low back pain sufferers - a randomised controlled clinical trial in a 2x2 factorial design

      FORSCHENDE KOMPLEMENTARMEDIZIN UND KLASSISCHE NATURHEILKUNDE
    46. Buzzini, P
      An optimization study of carotenoid production by Rhodotorula glutinis DBVPG 3853 from substrates containing concentrated rectified grape must as thesole carbohydrate source

      JOURNAL OF INDUSTRIAL MICROBIOLOGY & BIOTECHNOLOGY
    47. Oh, JE; Cha, KJ
      Noise reduction of muffler by optimal design

      KSME INTERNATIONAL JOURNAL
    48. Tansel, B; Regula, J
      Coagulation enhanced centrifugation for treatment of petroleum hydrocarboncontaminated waters

      JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING
    49. Franchini, M; Hashemi, AM; O'Connell, PE
      Climatic and basin factors affecting the flood frequency curve: PART II - A full sensitivity analysis based on the continuous simulation approach combined with a factorial experimental design

      HYDROLOGY AND EARTH SYSTEM SCIENCES
    50. Carvalho, CML; Cunnah, P; Aires-Barros, MR; Cabral, JMS
      Performance of a membrane bioreactor for enzymatic transesterification: Characterization and comparison with a batch stirred tank reactor

      BIOCATALYSIS AND BIOTRANSFORMATION
    51. Elliott, M; Zheng, Y; Bagley, DM
      Determining significant anaerobic kinetic parameters using simulation

      ENVIRONMENTAL TECHNOLOGY
    52. Vaireanu, DI; Fielden, PR; Brown, BJT
      A capacitively coupled conductivity detector for electroseparations

      MEASUREMENT SCIENCE & TECHNOLOGY
    53. Tay, JC; Quek, C
      Issues in the performance measurement of constraint-satisfaction techniques

      ARTIFICIAL INTELLIGENCE IN ENGINEERING
    54. Torres-Bacete, J; Arroyo, M; Torres-Guzman, R; de la Mata, I; Castillon, MP; Acebal, C
      Optimization of 6-aminopenicillanic acid (6-APA) production by using a newimmobilized penicillin acylase

      BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY
    55. Crine, JP
      When Taguchi meets water treeing

      IEEE ELECTRICAL INSULATION MAGAZINE
    56. Nelson, BJ; Montgomery, DC; Elias, RJ; Maass, E
      A comparison of several design augmentation strategies

      QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL
    57. Vannecke, C; Nguyet, ANM; Bloomfield, MS; Staple, AJ; Vander Heyden, Y; Massart, DL
      Development and optimisation of a flow injection assay for fluticasone propionate using an asymmetrical design and the variable-size simplex algorithm

      JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
    58. Izgi, B; Demir, C; Gucer, S
      Application of factorial design for mercury determination by trapping and graphite furnace atomic absorption spectrometry

      SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
    59. Bloomfield, MS; Butler, WC
      Robustness testing, using experimental design, of a flow-through dissolution method for a product where the actives have markedly differing solubility properties

      INTERNATIONAL JOURNAL OF PHARMACEUTICS
    60. Marengo, E; Cavalli, R; Caputo, O; Rodriguez, L; Gasco, MR
      Scale-up of the preparation process of solid lipid nanospheres. Part I

      INTERNATIONAL JOURNAL OF PHARMACEUTICS
    61. Phaechamud, T; Koizumi, T; Ritthidej, GC
      Chitosan citrate as film former: compatibility with water-soluble anionic dyes and drug dissolution from coated tablet

      INTERNATIONAL JOURNAL OF PHARMACEUTICS
    62. Rafiqul, I; Bai, LG; Yan, YJ; Li, TC
      Study on co-liquefaction of coal and bagasse by factorial experiment design method

      FUEL PROCESSING TECHNOLOGY
    63. Sahoo, NR; Pandalai, HS; Subramanyam, A
      Secondary geochemical dispersion in the Precambrian auriferous Hutti-Maskischist belt, Raichur district, Karnataka, India. Part II. Application of factorial design in the analysis of secondary dispersion of As

      JOURNAL OF GEOCHEMICAL EXPLORATION
    64. Chawla, V; Tiwary, AK; Gupta, S
      Characterization of polyvinylalcohol microspheres of diclofenac sodium: Application of statistical design

      DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
    65. Armstrong, RA
      Competitive interactions between four foliose lichen species with and without nutrient enrichment

      SYMBIOSIS
    66. Freire-Santos, F; Oteiza-Lopez, AM; Vergara-Castiblanco, CA; Ares-Mazas, E
      Study of the combined influence of environmental factors on viability of Cryptosporidium parvum oocysts in water evaluated by fluorogenic vital dyes and excystation techniques

      VETERINARY PARASITOLOGY
    67. Trezona, RI; Pickles, MJ; Hutchings, IM
      A full factorial investigation of the erosion durability of automotive clearcoats

      TRIBOLOGY INTERNATIONAL
    68. Ujang, Z; Anderson, GK
      Effect of the operating parameters on the separation of metal chelates using low pressure reverse osmosis membrane (LPROM)

      WATER SCIENCE AND TECHNOLOGY
    69. De Lucas, A; Rodriguez, L; Sanchez, P
      Optimization of the molar composition of the gel in the synthesis of titanium silicalite TS-2

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    70. Weon, KY; Lee, KT; Seo, SH
      Optimization study on the formulation of roxithromycin dispersible tablet using experimental design

      ARCHIVES OF PHARMACAL RESEARCH
    71. Villanueva, M; Pomares, M; Catasus, M; Diaz, J
      Application of factorial desingns for the description and correction of combined matrix efects in ICP-AES

      QUIMICA ANALITICA
    72. Carvalho, CML; Aires-Barros, MR; Cabral, JMS
      Kinetics of cutinase catalyzed transesterification in AOT reversed micelles: modeling of a batch stir-red tank reactor

      JOURNAL OF BIOTECHNOLOGY
    73. Goncalves, AM; Serro, AP; Aires-Barros, MR; Cabral, JMS
      Effects of ionic surfactants used in reversed micelles on cutinase activity and stability

      BIOCHIMICA ET BIOPHYSICA ACTA-PROTEIN STRUCTURE AND MOLECULAR ENZYMOLOGY
    74. Darwish, SM
      Machining of difficult-to-cut materials with bonded tools

      INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
    75. Santos, MM; Boss, EA; Maciel, R
      Supercritical extraction of oleaginous: Parametric sensitivity analysis

      BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING
    76. Almeida, RB; Silva, JBA; Lima, UA; Assis, AN
      High-gravity brewing utilizing factorial design

      BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING
    77. da Silva, JBP
      Application of factorial design for the ab initio study of cis- and trans-1,2 dihaloethylene stabilities

      JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY
    78. Davies, ZS; Gilbert, RJ; Merry, RJ; Kell, DB; Theodorou, MK; Griffith, GW
      Efficient improvement of silage additives by using genetic algorithms

      APPLIED AND ENVIRONMENTAL MICROBIOLOGY
    79. Tesfaye, W; Garcia-Parrilla, MC; Troncoso, AM
      Set up and optimization of a laboratory scale fermenter for the productionof wine vinegar

      JOURNAL OF THE INSTITUTE OF BREWING
    80. Wihlborg, A; Gunnarsson, L
      A frictional study of uncoated EBT steel sheets in a bending under tensionfriction test

      WEAR
    81. Chen, LC
      Effects of factors and interacted factors on the optimal decolorization process of methyl orange by ozone

      WATER RESEARCH
    82. Liu, CH; Sun, DX
      Analysis of interval-censored data from fractionated experiments using covariance adjustment

      TECHNOMETRICS
    83. Sanz, J; Perez, M; Martinez, MT; Plaza, M
      Optimization of dimethyltin chloride determination by hydride generation gas phase molecular absorption spectrometry using a central composite design

      TALANTA
    84. Copeland, KAF; Nelson, PR
      Latin squares and two-level fractional factorial designs

      JOURNAL OF QUALITY TECHNOLOGY
    85. Chang, JF; Wang, HL; Hon, MH
      Studying of transparent conductive ZnO : Al thin films by RF reactive magnetron sputtering

      JOURNAL OF CRYSTAL GROWTH
    86. Bouler, JM; LeGeros, RZ; Daculsi, G
      Biphasic calcium phosphates: Influence of three synthesis parameters on the HA/beta-TCP ratio

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    87. De Wet-Roos, D; Knoetze, JH; Cooray, B; Sanderson, RD
      Emulsion polymerization of an epoxy-acrylate emulsion stabilized with polyacrylate. II. Using the results of statistically designed experiments to deduce a possible polymerization mechanism

      JOURNAL OF APPLIED POLYMER SCIENCE
    88. Hu, CC; Weng, CY
      Hydrogen evolving activity on nickel-molybdenum deposits using experimental strategies

      JOURNAL OF APPLIED ELECTROCHEMISTRY
    89. Wery, M; Catonne, JC; Hihn, JY
      Barrel zinc electrodeposition from alkaline solution

      JOURNAL OF APPLIED ELECTROCHEMISTRY
    90. Terezo, AJ; Pereira, EC
      Fractional factorial design applied to investigate properties of Ti/IrO2-Nb2O5 electrodes

      ELECTROCHIMICA ACTA
    91. Garcia-Ayuso, LE; Velasco, J; Dobarganes, MC; de Castro, MD
      Determination of the oil content of seeds by focused microwave-assisted soxhlet extraction

      CHROMATOGRAPHIA
    92. Tsai, PW; Gilmour, SG; Mead, R
      Projective three-level main effects designs robust to model uncertainty

      BIOMETRIKA
    93. Fang, KT; Mukerjee, R
      A connection between uniformity and aberration in regular fractions of two-level factorials

      BIOMETRIKA
    94. Liu, GH; Van Wie, BJ; Leatzow, D; Weyrauch, B; Tiffany, T
      Experimental design modeling of carryover to optimize air-segmented continuous flow analysis

      ANALYTICA CHIMICA ACTA
    95. Hund, E; Vander Heyden, Y; Haustein, M; Massart, DL; Smeyers-Verbeke, J
      Comparison of several criteria to decide on the significance of effects ina robustness test with an asymmetrical factorial design

      ANALYTICA CHIMICA ACTA
    96. Reche, F; Garrigos, MC; Sanchez, A; Jimenez, A
      Simultaneous supercritical fluid derivatization and extraction of formaldehyde by the Hantzsch reaction

      JOURNAL OF CHROMATOGRAPHY A
    97. Garrigos, MC; Reche, F; Pernias, K; Jimenez, A
      Optimization of parameters for the analysis of aromatic amines in finger-paints

      JOURNAL OF CHROMATOGRAPHY A
    98. Gonzalez-Barreiro, C; Lores, M; Casais, MC; Cela, R
      Optimisation of alachlor solid-phase microextraction from water samples using experimental design

      JOURNAL OF CHROMATOGRAPHY A
    99. Abuin, M; Carro, AM; Lorenzo, RA
      Experimental design of a microwave-assisted extraction-derivatization method for the analysis of methylmercury

      JOURNAL OF CHROMATOGRAPHY A
    100. Perrin, C; Vargas, MG; Vander Heyden, Y; Maftouh, M; Massart, DL
      Fast development of separation methods for the chiral analysis of amino acid derivatives using capillary electrophoresis and experimental designs

      JOURNAL OF CHROMATOGRAPHY A


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 08/08/20 alle ore 08:00:58