Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Velten, D; Biehl, V; Aubertin, F; Valeske, B; Possart, W; Breme, J
   Preparation of TiO2 layers on cp-Ti and Ti6Al4V by thermal and anodic oxidation and by sol-gel coating techniques and their characterization
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   D. Velten et al., "Preparation of TiO2 layers on cp-Ti and Ti6Al4V by thermal and anodic oxidation and by sol-gel coating techniques and their characterization", J BIOMED MR, 59(1), 2002, pp. 18-28
2. Zhang, TH; Wu, YG; Yi, ZZ; Zhang, X; Wang, XY
   Nano-phases and corrosion resistance of C+Mo dual implanted steel
   SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES
   
   T.H. Zhang et al., "Nano-phases and corrosion resistance of C+Mo dual implanted steel", SCI CHINA E, 44(4), 2001, pp. 383-388
3. Balaraju, JN; Narayanan, TSNS; Seshadri, SK
   Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy
   JOURNAL OF SOLID STATE ELECTROCHEMISTRY
   
   J.N. Balaraju et al., "Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy", J SOL ST EL, 5(5), 2001, pp. 334-338
4. Raab, V; Merz, M; Sundermeyer, J
   Ligand effects in the copper catalyzed aerobic oxidative carbonylation of methanol to dimethyl carbonate (DMC)
   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
   
   V. Raab et al., "Ligand effects in the copper catalyzed aerobic oxidative carbonylation of methanol to dimethyl carbonate (DMC)", J MOL CAT A, 175(1-2), 2001, pp. 51-63
5. Asami, K; Zhang, BP; Mehmood, M; Habazaki, H; Hashimoto, K
   Effects of nanoscale heterogeneity on the corrosion behavior of non-equilibrium alloys
   SCRIPTA MATERIALIA
   
   K. Asami et al., "Effects of nanoscale heterogeneity on the corrosion behavior of non-equilibrium alloys", SCR MATER, 44(8-9), 2001, pp. 1655-1658
6. Zeng, DW; Xie, CS; Hu, QW; Yung, KC
   Corrosion resistance enhancement of Ni-resist ductile iron by laser surface alloying
   SCRIPTA MATERIALIA
   
   D.W. Zeng et al., "Corrosion resistance enhancement of Ni-resist ductile iron by laser surface alloying", SCR MATER, 44(4), 2001, pp. 651-657
7. Umehara, H; Takaya, M; Kojima, Y
   An investigation of the structure and corrosion resistance of permanganateconversion coatings on AZ91D magnesium alloy
   MATERIALS TRANSACTIONS
   
   H. Umehara et al., "An investigation of the structure and corrosion resistance of permanganateconversion coatings on AZ91D magnesium alloy", MATER TRANS, 42(8), 2001, pp. 1691-1699
8. Mori, K; Hirahara, H; Oishi, Y; Sasaki, H
   Polymer plating of 6-substituted-1, 3, 5-triazine-2, 4-dithiols on magnesium alloys and applications of the plated alloys
   MATERIALS TRANSACTIONS
   
   K. Mori et al., "Polymer plating of 6-substituted-1, 3, 5-triazine-2, 4-dithiols on magnesium alloys and applications of the plated alloys", MATER TRANS, 42(7), 2001, pp. 1219-1224
9. Fukumoto, S; Yamamoto, A; Terasawa, M; Mitamura, T; Tsubakino, H
   Microstructures and corrosion resistance of magnesium implanted with nitrogen ions
   MATERIALS TRANSACTIONS
   
   S. Fukumoto et al., "Microstructures and corrosion resistance of magnesium implanted with nitrogen ions", MATER TRANS, 42(7), 2001, pp. 1232-1236
10. Yamamoto, A; Watanabe, A; Sugahara, K; Fukumoto, S; Tsubakino, H
    Deposition coating of magnesium alloys with pure magnesium
    MATERIALS TRANSACTIONS
    
    A. Yamamoto et al., "Deposition coating of magnesium alloys with pure magnesium", MATER TRANS, 42(7), 2001, pp. 1237-1242
11. Yamamoto, A; Watanabe, A; Sugahara, K; Fukumoto, S; Tsubakino, H
    In situ laser microscopy on corrosion in deposition coated magnesium alloy
    MATERIALS TRANSACTIONS
    
    A. Yamamoto et al., "In situ laser microscopy on corrosion in deposition coated magnesium alloy", MATER TRANS, 42(7), 2001, pp. 1243-1248
12. Podchernyaeva, IA; Lavrenko, VA; Schvets, VA; Frolov, AA; Teplenko, MA
    Formation of a corrosion-resistant layer on steel by reaction with a Si3N4-Al2O3 composite under the conditions of light-thermal treatment
    POWDER METALLURGY AND METAL CERAMICS
    
    I.A. Podchernyaeva et al., "Formation of a corrosion-resistant layer on steel by reaction with a Si3N4-Al2O3 composite under the conditions of light-thermal treatment", POWD MET ME, 40(1-2), 2001, pp. 44-48
13. Trivedi, HK; Massey, MM; Bhattacharya, RS; Strahl, GA; Collum, D
    Next generation lubrication system for weapons
    TRIBOLOGY LETTERS
    
    H.K. Trivedi et al., "Next generation lubrication system for weapons", TRIBOL LETT, 10(4), 2001, pp. 229-235
14. Lunarska, E; Ziomek-Moroz, M; Michalski, A
    Electrochemical determining of penetrating porosity and the chemical and phase composition of pulse plasma deposited Ti-Al and Ni-Al coatings
    INTERMETALLICS
    
    E. Lunarska et al., "Electrochemical determining of penetrating porosity and the chemical and phase composition of pulse plasma deposited Ti-Al and Ni-Al coatings", INTERMETALL, 9(8), 2001, pp. 711-719
15. Bapat, JD
    Performance of cement concrete with mineral admixtures
    ADVANCES IN CEMENT RESEARCH
    
    J.D. Bapat, "Performance of cement concrete with mineral admixtures", ADV CEM RES, 13(4), 2001, pp. 139-155
16. Gallardo, J; Galliano, P; Duran, A
    Bioactive and protective sol-gel coatings on metals for orthopaedic prostheses
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
    
    J. Gallardo et al., "Bioactive and protective sol-gel coatings on metals for orthopaedic prostheses", J SOL-GEL S, 21(1-2), 2001, pp. 65-74
17. Habazaki, H; Sato, T; Kawashima, A; Asami, K; Hashimoto, K
    Preparation of corrosion-resistant amorphous Ni-Cr-P-B bulk alloys containing molybdenum and tantalum
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    H. Habazaki et al., "Preparation of corrosion-resistant amorphous Ni-Cr-P-B bulk alloys containing molybdenum and tantalum", MAT SCI E A, 304, 2001, pp. 696-700
18. Kawashima, A; Habazaki, H; Hashimoto, K
    Highly corrosion-resistant Ni-based bulk amorphous alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    A. Kawashima et al., "Highly corrosion-resistant Ni-based bulk amorphous alloys", MAT SCI E A, 304, 2001, pp. 753-757
19. Rubinshtein, A; Shneck, R; Danon, A; Hayon, J; Nathan, S; Raveh, A
    Surface treatment of tantalum to improve its corrosion resistance
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    A. Rubinshtein et al., "Surface treatment of tantalum to improve its corrosion resistance", MAT SCI E A, 302(1), 2001, pp. 128-134
20. Pang, SJ; Zhang, T; Asami, K; Inoue, A
    New Fe-Cr-Mo-(Nb, Ta)-C-B glassy alloys with high glass-forming ability and good corrosion resistance
    MATERIALS TRANSACTIONS JIM
    
    S.J. Pang et al., "New Fe-Cr-Mo-(Nb, Ta)-C-B glassy alloys with high glass-forming ability and good corrosion resistance", MATER T JIM, 42(2), 2001, pp. 376-379
21. Rudenja, S; Pan, J; Wallinder, IO; Leygraf, C; Kulu, P; Mikli, V
    Enhanced passivity of austenitic AISI 304 stainless steel by low-temperature ion nitriding
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS
    
    S. Rudenja et al., "Enhanced passivity of austenitic AISI 304 stainless steel by low-temperature ion nitriding", J VAC SCI A, 19(4), 2001, pp. 1425-1431
22. Metroke, TL; Parkhill, RL; Knobbe, ET
    Passivation of metal alloys using sol-gel-derived materials - a review
    PROGRESS IN ORGANIC COATINGS
    
    T.L. Metroke et al., "Passivation of metal alloys using sol-gel-derived materials - a review", PROG ORG C, 41(4), 2001, pp. 233-238
23. Gonzalez, S; Gil, MA; Hernandez, JO; Fox, V; Souto, RM
    Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating
    PROGRESS IN ORGANIC COATINGS
    
    S. Gonzalez et al., "Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating", PROG ORG C, 41(1-3), 2001, pp. 167-170
24. Khaled, M; Yilbas, BS; Shirokoff, J
    Electrochemical study of laser nitrided and PVD TiN coated Ti-6Al-4V alloy: the observation of selective dissolution
    SURFACE & COATINGS TECHNOLOGY
    
    M. Khaled et al., "Electrochemical study of laser nitrided and PVD TiN coated Ti-6Al-4V alloy: the observation of selective dissolution", SURF COAT, 148(1), 2001, pp. 46-54
25. Sheeja, D; Tay, BK; Lau, SP; Nung, LN
    Tribological characterisation of diamond-like carbon coatings on Co-Cr-Mo alloy for orthopaedic applications
    SURFACE & COATINGS TECHNOLOGY
    
    D. Sheeja et al., "Tribological characterisation of diamond-like carbon coatings on Co-Cr-Mo alloy for orthopaedic applications", SURF COAT, 146, 2001, pp. 410-416
26. Lang, FQ; Yu, ZM
    The corrosion resistance and wear resistance of thick TiN coatings deposited by arc ion plating
    SURFACE & COATINGS TECHNOLOGY
    
    F.Q. Lang e Z.M. Yu, "The corrosion resistance and wear resistance of thick TiN coatings deposited by arc ion plating", SURF COAT, 145(1-3), 2001, pp. 80-87
27. Sanchette, F; Billard, A
    Main features of magnetron sputtered aluminium-transition metal alloy coatings
    SURFACE & COATINGS TECHNOLOGY
    
    F. Sanchette e A. Billard, "Main features of magnetron sputtered aluminium-transition metal alloy coatings", SURF COAT, 142, 2001, pp. 218-224
28. Macionczyk, F; Gerold, B; Thull, R
    Repassivating tantalum/tantalum oxide surface modification on stainless steel implants
    SURFACE & COATINGS TECHNOLOGY
    
    F. Macionczyk et al., "Repassivating tantalum/tantalum oxide surface modification on stainless steel implants", SURF COAT, 142, 2001, pp. 1084-1087
29. Batista, JCA; Matthews, A; Godoy, C
    Micro-abrasive wear of PVD duplex and single-layered coatings
    SURFACE & COATINGS TECHNOLOGY
    
    J.C.A. Batista et al., "Micro-abrasive wear of PVD duplex and single-layered coatings", SURF COAT, 142, 2001, pp. 1137-1143
30. Yan, DR; He, JN; Li, XZ; Liu, YG; Zhang, JX; Ding, HL
    An investigation of the corrosion behavior of Al2O3-based ceramic composite coatings in dilute HCl solution
    SURFACE & COATINGS TECHNOLOGY
    
    D.R. Yan et al., "An investigation of the corrosion behavior of Al2O3-based ceramic composite coatings in dilute HCl solution", SURF COAT, 141(1), 2001, pp. 1-6
31. Seok, JW; Jadeed, NM; Lin, RY
    Sputter-deposited nanocrystalline Cr and CrN coatings on steels
    SURFACE & COATINGS TECHNOLOGY
    
    J.W. Seok et al., "Sputter-deposited nanocrystalline Cr and CrN coatings on steels", SURF COAT, 138(1), 2001, pp. 14-22
32. Vacandio, F; Massiani, Y; Eyraud, M; Rossi, S; Fedrizzi, L
    Influence of various nickel under-layers on the corrosion behaviour of AlNfilms deposited by reactive sputtering
    SURFACE & COATINGS TECHNOLOGY
    
    F. Vacandio et al., "Influence of various nickel under-layers on the corrosion behaviour of AlNfilms deposited by reactive sputtering", SURF COAT, 137(2-3), 2001, pp. 284-292
33. Yue, TM; Yu, JK; Man, HC
    The effect of excimer laser surface treatment on pitting corrosion resistance of 316LS stainless steel
    SURFACE & COATINGS TECHNOLOGY
    
    T.M. Yue et al., "The effect of excimer laser surface treatment on pitting corrosion resistance of 316LS stainless steel", SURF COAT, 137(1), 2001, pp. 65-71
34. Blawert, C; Kalvelage, H; Mordike, BL; Collins, GA; Short, KT; Jiraskova, Y; Schneeweiss, O
    Nitrogen and carbon expanded austenite produced by PI3
    SURFACE & COATINGS TECHNOLOGY
    
    C. Blawert et al., "Nitrogen and carbon expanded austenite produced by PI3", SURF COAT, 136(1-3), 2001, pp. 181-187
35. Morita, R; Azuma, K; Inoue, S; Miyano, R; Takikawa, H; Kobayashi, A; Fujiwara, E; Uchida, H; Yatsuzuka, M
    Corrosion resistance of TiN coatings produced by various dry processes
    SURFACE & COATINGS TECHNOLOGY
    
    R. Morita et al., "Corrosion resistance of TiN coatings produced by various dry processes", SURF COAT, 136(1-3), 2001, pp. 207-210
36. Datta, S
    Studies on broad spectrum corrosion resistant oxide coatings
    BULLETIN OF MATERIALS SCIENCE
    
    S. Datta, "Studies on broad spectrum corrosion resistant oxide coatings", B MATER SCI, 24(6), 2001, pp. 569-577
37. Pan, T; Ma, MH; Xin, FB; Xin, XQ
    XPS and AES investigation of nanometer composite coatings of Ni-P-ZnX on steel surface (ZnX = ZnSnO3, Zn-3(PO4)(2), ZnSiO3)
    APPLIED SURFACE SCIENCE
    
    T. Pan et al., "XPS and AES investigation of nanometer composite coatings of Ni-P-ZnX on steel surface (ZnX = ZnSnO3, Zn-3(PO4)(2), ZnSiO3)", APPL SURF S, 181(3-4), 2001, pp. 191-195
38. Dabala, M; Armelao, L; Buchberger, A; Calliari, I
    Cerium-based conversion layers on aluminum alloys
    APPLIED SURFACE SCIENCE
    
    M. Dabala et al., "Cerium-based conversion layers on aluminum alloys", APPL SURF S, 172(3-4), 2001, pp. 312-322
39. Yue, TM; Hu, QW; Mei, Z; Man, HC
    Laser cladding of stainless steel on magnesium ZK60/SiC composite
    MATERIALS LETTERS
    
    T.M. Yue et al., "Laser cladding of stainless steel on magnesium ZK60/SiC composite", MATER LETT, 47(3), 2001, pp. 165-170
40. Starosvetsky, D; Gotman, I
    Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy
    BIOMATERIALS
    
    D. Starosvetsky e I. Gotman, "Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy", BIOMATERIAL, 22(13), 2001, pp. 1853-1859
41. Saggau, R; Pries, H; Finke, M
    Heat tints due to welding an their influence on the corrosion of high-alloy CrNi steels
    ZEITSCHRIFT FUR METALLKUNDE
    
    R. Saggau et al., "Heat tints due to welding an their influence on the corrosion of high-alloy CrNi steels", Z METALLKUN, 92(3), 2001, pp. 286-292
42. Stanford, MK; Jain, VK
    Friction and wear characteristics of hard coatings
    WEAR
    
    M.K. Stanford e V.K. Jain, "Friction and wear characteristics of hard coatings", WEAR, 250, 2001, pp. 990-996
43. Toro, A; Sinatora, A; Tanaka, DK; Tschiptschin, AP
    Corrosion-erosion of nitrogen bearing martensitic stainless steels in seawater-quartz slurry
    WEAR
    
    A. Toro et al., "Corrosion-erosion of nitrogen bearing martensitic stainless steels in seawater-quartz slurry", WEAR, 250, 2001, pp. 1257-1264
44. Batista, JCA; Joseph, MC; Godoy, C; Matthews, A
    Micro-abrasion wear testing of PVD TiN coatings on untreated and plasma nitrided AISI H 13 steel
    WEAR
    
    J.C.A. Batista et al., "Micro-abrasion wear testing of PVD TiN coatings on untreated and plasma nitrided AISI H 13 steel", WEAR, 249(10-11), 2001, pp. 971-979
45. Sobiecki, JR; Wierzchon, T; Rudnicki, J
    The influence of glow discharge nitriding, oxynitriding and carbonitridingon surface modification of Ti-1Al-1Mn titanium alloy
    VACUUM
    
    J.R. Sobiecki et al., "The influence of glow discharge nitriding, oxynitriding and carbonitridingon surface modification of Ti-1Al-1Mn titanium alloy", VACUUM, 64(1), 2001, pp. 41-46
46. Morimoto, J; Abe, N; Kuriyama, F; Tomie, M
    Formation of a Cr3C2/Ni-Cr alloy layer by an electron beam cladding methodand evaluation of the layer properties
    VACUUM
    
    J. Morimoto et al., "Formation of a Cr3C2/Ni-Cr alloy layer by an electron beam cladding methodand evaluation of the layer properties", VACUUM, 62(2-3), 2001, pp. 203-210
47. Kawata, K; Sugimura, H; Takai, O
    Characterization of multilayer films of Ti-Al-O-C-N system prepared by pulsed d.c. plasma-enhanced chemical vapor deposition
    THIN SOLID FILMS
    
    K. Kawata et al., "Characterization of multilayer films of Ti-Al-O-C-N system prepared by pulsed d.c. plasma-enhanced chemical vapor deposition", THIN SOL FI, 390(1-2), 2001, pp. 64-69
48. Recarey, LE; Bermudez, AS; Madrinan, SU; Alvela, FB
    Noise resistance applied to the study of zinc rich paints
    REVISTA DE METALURGIA
    
    L.E. Recarey et al., "Noise resistance applied to the study of zinc rich paints", REV METAL M, 37(1), 2001, pp. 24-33
49. Vasilescu, E; Popa, MV; Drob, P; Anghel, M; Vasilescu, C
    The effect of plastic deformation upon the titanium and Ti-1Ni-0.5Mo ternary alloy in 10% oxalic acid corrosion resistance
    REVISTA DE CHIMIE
    
    E. Vasilescu et al., "The effect of plastic deformation upon the titanium and Ti-1Ni-0.5Mo ternary alloy in 10% oxalic acid corrosion resistance", REV CHIM, 52(3), 2001, pp. 127-129
50. Choe, HC; Ko, YM; Hwang, KY
    Corrosion characteristics of EB-PVD Ti/TiN multi-layer film coated Sm-Co and Fe-Nd-B magnets
    JOURNAL OF THE JAPAN INSTITUTE OF METALS
    
    H.C. Choe et al., "Corrosion characteristics of EB-PVD Ti/TiN multi-layer film coated Sm-Co and Fe-Nd-B magnets", J JPN METAL, 65(4), 2001, pp. 253-261
51. Zhang, GF; Morishita, M; Koyama, K
    Phase relationship in the Ni-Mo-B-O system and oxidation property of a Ni-NiMo2B2 two-phase alloy
    JOURNAL OF THE JAPAN INSTITUTE OF METALS
    
    G.F. Zhang et al., "Phase relationship in the Ni-Mo-B-O system and oxidation property of a Ni-NiMo2B2 two-phase alloy", J JPN METAL, 65(4), 2001, pp. 279-287
52. Shi, W; Kamiya, A; Zhu, J; Nonami, T; Watazu, A
    Fabrication of alumina short fiber reinforced titanium composite by hot-press method
    JOURNAL OF THE JAPAN INSTITUTE OF METALS
    
    W. Shi et al., "Fabrication of alumina short fiber reinforced titanium composite by hot-press method", J JPN METAL, 65(3), 2001, pp. 183-186
53. Tsuchiyama, A; Minami, M; Shima, Y; Takatani, Y; Hayashi, Y; Masuda, M; Hasuyama, H
    Influence of deposition conditions on corrosion resistance of DLC/Al prepared by ionization deposition
    JOURNAL OF THE JAPAN INSTITUTE OF METALS
    
    A. Tsuchiyama et al., "Influence of deposition conditions on corrosion resistance of DLC/Al prepared by ionization deposition", J JPN METAL, 65(10), 2001, pp. 903-909
54. Saravanan, K; Muralidharan, S; Natesan, M; Venkatachari, G; Srinivasan, S
    Studies on corrosion resistance of galvanized reinforcement bars in simulated concrete environments
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
    
    K. Saravanan et al., "Studies on corrosion resistance of galvanized reinforcement bars in simulated concrete environments", T I MET FIN, 79, 2001, pp. 146-150
55. Choi, HW; Kim, KH; Kim, J; Han, SH; Kim, HJ
    The effect of Cr addition on structure and corrosion resistance in FeTiN nanocrystalline soft magnetic thin films
    IEEE TRANSACTIONS ON MAGNETICS
    
    H.W. Choi et al., "The effect of Cr addition on structure and corrosion resistance in FeTiN nanocrystalline soft magnetic thin films", IEEE MAGNET, 37(4), 2001, pp. 1773-1775
56. Kim, YM; Choi, D; Kim, KH; Kim, J; Han, SH; Kim, HJ
    High frequency characteristics of As-sputtered Co-Ni-Fe-N soft magnetic thin films
    IEEE TRANSACTIONS ON MAGNETICS
    
    Y.M. Kim et al., "High frequency characteristics of As-sputtered Co-Ni-Fe-N soft magnetic thin films", IEEE MAGNET, 37(4), 2001, pp. 2288-2290
57. Mudali, UK; Katada, Y
    Electrochemical atomic force microscopic studies on passive films of nitrogen-bearing austenitic stainless steels
    ELECTROCHIMICA ACTA
    
    U.K. Mudali e Y. Katada, "Electrochemical atomic force microscopic studies on passive films of nitrogen-bearing austenitic stainless steels", ELECTR ACT, 46(24-25), 2001, pp. 3735-3742
58. Kubota, T; Hara, N; Sugimoto, K
    Real time spectroscopic ellipsometry study on growth processes of ZrO2 thin films in metallorganic chemical vapor deposition
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    
    T. Kubota et al., "Real time spectroscopic ellipsometry study on growth processes of ZrO2 thin films in metallorganic chemical vapor deposition", J ELCHEM SO, 148(9), 2001, pp. C632-C639
59. Yu, SY; Scully, JR; Vitus, CM
    Influence of niobium and zirconium alloying additions on the anodic dissolution behavior of activated titanium in HCl solutions
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    
    S.Y. Yu et al., "Influence of niobium and zirconium alloying additions on the anodic dissolution behavior of activated titanium in HCl solutions", J ELCHEM SO, 148(2), 2001, pp. B68-B78
60. Yu, XW; Cao, CN; Yao, ZM; Zhou, DR; Yin, ZD
    Study of double layer rare earth metal conversion coating on aluminum alloy LY12
    CORROSION SCIENCE
    
    X.W. Yu et al., "Study of double layer rare earth metal conversion coating on aluminum alloy LY12", CORROS SCI, 43(7), 2001, pp. 1283-1294
61. Perren, RA; Suter, TA; Uggowitzer, PJ; Weber, L; Magdowski, R; Bohni, H; Speidel, MO
    Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method I. Precipitation-free states
    CORROSION SCIENCE
    
    R.A. Perren et al., "Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method I. Precipitation-free states", CORROS SCI, 43(4), 2001, pp. 707-726
62. Perren, RA; Suter, T; Solenthaler, C; Gullo, G; Uggowitzer, PJ; Bohni, H; Speidel, MO
    Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method II. Influence of precipitates
    CORROSION SCIENCE
    
    R.A. Perren et al., "Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method II. Influence of precipitates", CORROS SCI, 43(4), 2001, pp. 727-745
63. Yokoshima, T; Kaneko, D; Akahori, M; Nam, HS; Osaka, T
    Electroless CoNiFeB soft magnetic thin films with high corrosion resistance
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    
    T. Yokoshima et al., "Electroless CoNiFeB soft magnetic thin films with high corrosion resistance", J ELEC CHEM, 491(1-2), 2000, pp. 197-202
64. Dahm, KL; Dearnley, PA
    On the nature, properties and wear response of s-phase (nitrogen-alloyed stainless steel) coatings on AISI 316L
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    
    K.L. Dahm e P.A. Dearnley, "On the nature, properties and wear response of s-phase (nitrogen-alloyed stainless steel) coatings on AISI 316L", P I MEC E L, 214(L4), 2000, pp. 181-198
65. Becker, BS; Bolton, JD; Eagles, AM
    Sintering of 316L stainless steels to high density via the addition of chromium-molybdenum dibromide powders Part 1: sintering performance and mechanical properties
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    
    B.S. Becker et al., "Sintering of 316L stainless steels to high density via the addition of chromium-molybdenum dibromide powders Part 1: sintering performance and mechanical properties", P I MEC E L, 214(L3), 2000, pp. 139-152
66. Pacewska, B; Bukowska, M; Wilinska, I
    Influence of some aggressive media on corrosion resistance of mortars withspent cracking catalyst
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
    
    B. Pacewska et al., "Influence of some aggressive media on corrosion resistance of mortars withspent cracking catalyst", J THERM ANA, 60(1), 2000, pp. 257-264
67. Sato, Y; Kagotani, M; Souma, Y
    A new type of support 'bipyridine containing aromatic polyamide' to CuCl2 for synthesis of dimethyl carbonate (DMC) by oxidative carbonylation of methanol
    JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
    
    Y. Sato et al., "A new type of support 'bipyridine containing aromatic polyamide' to CuCl2 for synthesis of dimethyl carbonate (DMC) by oxidative carbonylation of methanol", J MOL CAT A, 151(1-2), 2000, pp. 79-85
68. Kushchevskaya, NF
    Corrosion resistance of highly dispersed ferromagnetic materials
    POWDER METALLURGY AND METAL CERAMICS
    
    N.F. Kushchevskaya, "Corrosion resistance of highly dispersed ferromagnetic materials", POWD MET ME, 39(3-4), 2000, pp. 113-115
69. Otsubo, F; Era, H; Kishitake, K
    Formation of amorphous Fe-Cr-Mo-8P-2C coatings by the high velocity oxy-fuel process
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    F. Otsubo et al., "Formation of amorphous Fe-Cr-Mo-8P-2C coatings by the high velocity oxy-fuel process", J THERM SPR, 9(4), 2000, pp. 494-498
70. Sridhar, K; Deshmukh, MB; Khanna, AS; Gasser, A
    Microstructural characterization of superaustenitic stainless steel surface alloys formed using laser treatment
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    K. Sridhar et al., "Microstructural characterization of superaustenitic stainless steel surface alloys formed using laser treatment", J THERM SPR, 9(3), 2000, pp. 377-388
71. Sato, Y; Yamamoto, T; Souma, Y
    Poly(pyridine-2,5-diyl)-CuCl2 catalyst for synthesis of dimethyl carbonateby oxidative carbonylation of methanol: catalytic activity and corrosion influence
    CATALYSIS LETTERS
    
    Y. Sato et al., "Poly(pyridine-2,5-diyl)-CuCl2 catalyst for synthesis of dimethyl carbonateby oxidative carbonylation of methanol: catalytic activity and corrosion influence", CATAL LETT, 65(1-3), 2000, pp. 123-126
72. Xu, J; Bai, XD; An, J; Fan, YD
    Effect of Ar ion irradiation on electrochemical behaviors of ziraloy-4
    APPLIED RADIATION AND ISOTOPES
    
    J. Xu et al., "Effect of Ar ion irradiation on electrochemical behaviors of ziraloy-4", APPL RAD IS, 53(6), 2000, pp. 1005-1010
73. Aneziris, CG; Pfaff, EM; Maier, HR
    Fine grained Mg-PSZ ceramics with titania and alumina or spinel additions for near net shape steel processing
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    
    C.G. Aneziris et al., "Fine grained Mg-PSZ ceramics with titania and alumina or spinel additions for near net shape steel processing", J EUR CERAM, 20(11), 2000, pp. 1729-1737
74. Fung, MK; Lai, KH; Lai, HL; Chan, CY; Wong, NB; Bello, I; Lee, CS; Lee, ST
    Diamond-like carbon coatings applied to hard disks
    DIAMOND AND RELATED MATERIALS
    
    M.K. Fung et al., "Diamond-like carbon coatings applied to hard disks", DIAM RELAT, 9(3-6), 2000, pp. 815-818
75. Ber, LB
    Accelerated artificial ageing regimes of commercial aluminum alloys. I. Al-Cu-Mg alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    L.B. Ber, "Accelerated artificial ageing regimes of commercial aluminum alloys. I. Al-Cu-Mg alloys", MAT SCI E A, 280(1), 2000, pp. 83-90
76. Ber, LB
    Accelerated artificial ageing regimes of commercial aluminium alloys. II: Al-Cu, Al-Zn-Mg-(Cu), Al-Mg-Si-(Cu) alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    L.B. Ber, "Accelerated artificial ageing regimes of commercial aluminium alloys. II: Al-Cu, Al-Zn-Mg-(Cu), Al-Mg-Si-(Cu) alloys", MAT SCI E A, 280(1), 2000, pp. 91-96
77. Zhang, Q; Wang, W
    Study of anodizing behavior and corrosion resistance of 7050 T7451 alloy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    Q. Zhang e W. Wang, "Study of anodizing behavior and corrosion resistance of 7050 T7451 alloy", MAT SCI E A, 280(1), 2000, pp. 168-172
78. Shi, CJ; Qian, JS
    High performance cementing materials from industrial slags - a review
    RESOURCES CONSERVATION AND RECYCLING
    
    C.J. Shi e J.S. Qian, "High performance cementing materials from industrial slags - a review", RESOUR CON, 29(3), 2000, pp. 195-207
79. Okazaki, Y; Nishimura, E
    Effect of metal released from Ti alloy wear powder on cell viability
    MATERIALS TRANSACTIONS JIM
    
    Y. Okazaki e E. Nishimura, "Effect of metal released from Ti alloy wear powder on cell viability", MATER T JIM, 41(9), 2000, pp. 1247-1255
80. Pang, SJ; Zhang, T; Kimura, H; Asami, K; Inoue, A
    Corrosion behavior of Zr-(Nb-)Al-Ni-Cu glassy alloys
    MATERIALS TRANSACTIONS JIM
    
    S.J. Pang et al., "Corrosion behavior of Zr-(Nb-)Al-Ni-Cu glassy alloys", MATER T JIM, 41(11), 2000, pp. 1490-1494
81. Ozaki, K; Matsumoto, A; Sugiyama, A; Nishio, T; Kobayashi, K
    Preparation and corrosion behavior of bulk Mg75Ni15Si10 amorphous alloy bymechanical alloying and pulsed current sintering
    MATERIALS TRANSACTIONS JIM
    
    K. Ozaki et al., "Preparation and corrosion behavior of bulk Mg75Ni15Si10 amorphous alloy bymechanical alloying and pulsed current sintering", MATER T JIM, 41(11), 2000, pp. 1495-1500
82. Abiko, K
    Why do we study ultra-high purity base metals?
    MATERIALS TRANSACTIONS JIM
    
    K. Abiko, "Why do we study ultra-high purity base metals?", MATER T JIM, 41(1), 2000, pp. 233-237
83. Pohjanne, P; Aho-Mantila, I
    High alloy stainless steel (6% Mo) in bleaching applications
    PULP & PAPER-CANADA
    
    P. Pohjanne e I. Aho-Mantila, "High alloy stainless steel (6% Mo) in bleaching applications", PULP PAPER, 101(7), 2000, pp. 28-30
84. Ivanov, I; Stefanov, Y; Noncheva, Z; Petrova, M; Dobrev, T; Mirkova, L; Vermeersch, R; Demaerel, JP
    Insoluble anodes used in hydrometallurgy Part I. Corrosion resistance of lead and lead alloy anodes
    HYDROMETALLURGY
    
    I. Ivanov et al., "Insoluble anodes used in hydrometallurgy Part I. Corrosion resistance of lead and lead alloy anodes", HYDROMETALL, 57(2), 2000, pp. 109-124
85. Bierwagen, GP; He, L; Li, J; Ellingson, L; Tallman, DE
    Studies of a new accelerated evaluation method for coating corrosion resistance - thermal cycling testing
    PROGRESS IN ORGANIC COATINGS
    
    G.P. Bierwagen et al., "Studies of a new accelerated evaluation method for coating corrosion resistance - thermal cycling testing", PROG ORG C, 39(1), 2000, pp. 67-78
86. Xu, J; Bai, XD; An, J; Fan, YD
    Comparison of electrochemical behaviors of zircaloy-4 irradiated by Ar andZr ions
    JOURNAL OF MATERIALS SCIENCE LETTERS
    
    J. Xu et al., "Comparison of electrochemical behaviors of zircaloy-4 irradiated by Ar andZr ions", J MAT SCI L, 19(11), 2000, pp. 943-945
87. Han, S; Lin, JH; Tsai, SH; Chung, SC; Wang, DY; Lu, FH; Shih, HC
    Corrosion and tribological studies of chromium nitride coated on steel with an interlayer of electroplated chromium
    SURFACE & COATINGS TECHNOLOGY
    
    S. Han et al., "Corrosion and tribological studies of chromium nitride coated on steel with an interlayer of electroplated chromium", SURF COAT, 133, 2000, pp. 460-465
88. Lee, CH; Min, KO
    Effects of heat treatment on the microstructure and properties of HVOF-sprayed Ni-Cr-W-Mo-B alloy coatings
    SURFACE & COATINGS TECHNOLOGY
    
    C.H. Lee e K.O. Min, "Effects of heat treatment on the microstructure and properties of HVOF-sprayed Ni-Cr-W-Mo-B alloy coatings", SURF COAT, 132(1), 2000, pp. 49-57
89. Lei, MK; Zhang, ZL; Ma, TC
    Plasma-based low-energy ion implantation for low-temperature surface engineering
    SURFACE & COATINGS TECHNOLOGY
    
    M.K. Lei et al., "Plasma-based low-energy ion implantation for low-temperature surface engineering", SURF COAT, 131(1-3), 2000, pp. 317-325
90. Zhang, X; Xie, XS; Yang, ZM; Dong, JX; Xu, Z; Gao, Y; Zhang, TH
    A study of nickel-based corrosion resisting alloy layer obtained by doubleglow plasma surface alloying technique
    SURFACE & COATINGS TECHNOLOGY
    
    X. Zhang et al., "A study of nickel-based corrosion resisting alloy layer obtained by doubleglow plasma surface alloying technique", SURF COAT, 131(1-3), 2000, pp. 378-382
91. Wierzchon, T; Ulbin-Pokorska, I; Sikorski, K
    Corrosion resistance of chromium nitride and oxynitride layers produced under glow discharge conditions
    SURFACE & COATINGS TECHNOLOGY
    
    T. Wierzchon et al., "Corrosion resistance of chromium nitride and oxynitride layers produced under glow discharge conditions", SURF COAT, 130(2-3), 2000, pp. 274-279
92. Song, RG; He, WZ; Huang, WD
    Effects of laser surface remelting on hydrogen permeation resistance of thermally-sprayed pure aluminum coatings
    SURFACE & COATINGS TECHNOLOGY
    
    R.G. Song et al., "Effects of laser surface remelting on hydrogen permeation resistance of thermally-sprayed pure aluminum coatings", SURF COAT, 130(1), 2000, pp. 20-23
93. Zhang, TH; Wu, YG; Deng, ZW; Ma, FR; Zhang, HX; Wang, XY; Liang, H; Zhang, XJ
    Properties of corrosion resistance in C++W+ dual implanted steel with nanometer phases
    SURFACE & COATINGS TECHNOLOGY
    
    T.H. Zhang et al., "Properties of corrosion resistance in C++W+ dual implanted steel with nanometer phases", SURF COAT, 128, 2000, pp. 181-185
94. Li, YL; Zhang, TH; Wang, XY
    Structure of corrosion resistance on H13 steels with titanium and carbon implantation
    SURFACE & COATINGS TECHNOLOGY
    
    Y.L. Li et al., "Structure of corrosion resistance on H13 steels with titanium and carbon implantation", SURF COAT, 128, 2000, pp. 205-208
95. Yang, MR; Wu, SK
    DC plasma-polymerized hexamethyldisilazane coatings of an equiatomic TiNi shape memory alloy
    SURFACE & COATINGS TECHNOLOGY
    
    M.R. Yang e S.K. Wu, "DC plasma-polymerized hexamethyldisilazane coatings of an equiatomic TiNi shape memory alloy", SURF COAT, 127(2-3), 2000, pp. 274-281
96. Zhang, TC; Luo, YC; Li, DY
    Erosion behavior of aluminide coating modified with yttrium addition underdifferent erosion conditions
    SURFACE & COATINGS TECHNOLOGY
    
    T.C. Zhang et al., "Erosion behavior of aluminide coating modified with yttrium addition underdifferent erosion conditions", SURF COAT, 126(2-3), 2000, pp. 102-109
97. Baker, MA; Gissler, W; Klose, S; Trampert, M; Weber, F
    Morphologies and corrosion properties of PVD Zn-Al coatings
    SURFACE & COATINGS TECHNOLOGY
    
    M.A. Baker et al., "Morphologies and corrosion properties of PVD Zn-Al coatings", SURF COAT, 125(1-3), 2000, pp. 207-211
98. Jehn, HA
    Improvement of the corrosion resistance of PVD hard coating-substrate systems
    SURFACE & COATINGS TECHNOLOGY
    
    H.A. Jehn, "Improvement of the corrosion resistance of PVD hard coating-substrate systems", SURF COAT, 125(1-3), 2000, pp. 212-217
99. Guzman, L; Adami, M; Gissler, W; Klose, S; De Rossi, S
    Vapour deposited Zn-Cr Alloy coatings for enhanced manufacturing and corrosion resistance of steel sheets
    SURFACE & COATINGS TECHNOLOGY
    
    L. Guzman et al., "Vapour deposited Zn-Cr Alloy coatings for enhanced manufacturing and corrosion resistance of steel sheets", SURF COAT, 125(1-3), 2000, pp. 218-222
100. Vershinin, N; Filonov, K; Straumal, B; Gust, W; Wiener, I; Rabkin, E; Kazakevich, A
     Corrosion behaviour of the protective and decorative TiN coatings on largearea steel strips
     SURFACE & COATINGS TECHNOLOGY
     
     N. Vershinin et al., "Corrosion behaviour of the protective and decorative TiN coatings on largearea steel strips", SURF COAT, 125(1-3), 2000, pp. 229-232