Si mostrano 100 riferimenti a partire da 1 |

Per ulteriori informazioni selezionare i riferimenti di interesse.

- KRISTKOVA Monika; WEISS Zdenek; FILIP Peter

Hydration properties of vermiculite in phenolic resin friction composites*Applied clay science*

- ALLO Wanda A; MURRAY Haydn H

Mineralogy, chemistry and potential applications of a white bentonite in San Juan province, Argentina*Applied clay science*

- Marin, JC; Canas, J; Paris, F; Morton, J

Determination of G(12) by means of the off-axis tension test. Part 1: review of gripping systems and correction factors*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Chen, J; New, A

Application of decohesive model with mixed damage scale in fracture analysis of composite materials*FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES*

- Crepin, D; Pyrz, M; De Saxce, G

Mixed finite 3D elements adapted for estimation of stress concentration inassembling of composites*COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE*

- Leroy, Y; Castaneda, PP

Bounds on the self-consistent approximation for nonlinear media and implications for the second-order method*COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE*

- Labat, L; Grisel, M; Breard, J; Bouquet, G

Original use of electrical conductivity for void detection due to injection conditions of composite materials*COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE*

- de Faria, AR; Hansen, JS

On buckling optimization under uncertain loading combinations*STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION*

- Mackay, TG; Weiglhofer, WS

Homogenization of biaxial composite materials: bianisotropic properties*JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS*

- Ma, ZF; Yang, XQ; Liao, XZ; Sun, X; McBreen, J

Electrochemical evaluation of composite cathodes base on blends of LiMn2O4and LiNi0.8Co0.2O2*ELECTROCHEMISTRY COMMUNICATIONS*

- Goldsztein, GH

Rigid perfectly plastic two-dimensional polycrystals*PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES*

- Johnson, AF

Modelling fabric reinforced composites under impact loads*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Ochiai, S; Hojo, M; Schulte, K; Fiedler, B

Nondimensional simulation of influence of toughness of interface on tensile stress-strain behavior of unidirectional microcomposite*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Adams, RD; Singh, MM

Low temperature transitions in fibre reinforced polymers*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Miyagawa, H; Sato, C; Ikegami, K

Interlaminar fracture toughness of CFRP in mode I and mode II determined by Raman spectroscopy*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Benzarti, K; Cangemi, L; Dal Maso, F

Transverse properties of unidirectional glass/epoxy composites: influence of fibre surface treatments*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Kawai, M; Hachinohe, A; Takumida, K; Kawase, Y

Off-axis fatigue behaviour and its damage mechanics modelling for unidirectional fibre-metal hybrid composite: GLARE 2*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Krueger, R; O'Brien, TK

A shell/3D modeling technique for the analysis of delaminated composite laminates*COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING*

- Takagi, M; Ohta, H; Imura, T; Kawamura, Y; Inoue, A

Wear properties of nanocrystalline aluminum alloys and their composites*SCRIPTA MATERIALIA*

- Matsui, K; Terada, K; Yuge, K

Parallelized two-scale analysis with a PC cluster for elastic-plastic heterogeneous media*JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING*

- Peiponen, KE; Makinen, MOA; Saarinen, JJ; Asakura, T

Dispersion theory of liquids containing optically linear and nonlinear Maxwell Garnett nanoparticles*OPTICAL REVIEW*

- Shen, SJ; Pfister, JC; Lee, JD

Stress wave propagation in composite materials*STRUCTURAL ENGINEERING AND MECHANICS*

- Geers, MGD; Kouznetsova, V; Brekelmans, WAM

Gradient-enhanced computational homogenization for the micro-macro scale transition*JOURNAL DE PHYSIQUE IV*

- Bonacci, JF; Maalej, M

Behavioral trends of RC beams strengthened with externally bonded FRP*JOURNAL OF COMPOSITES FOR CONSTRUCTION*

- Okeil, AM; El-Tawil, S; Shahawy, M

Canadian bridge design code provisions for fiber-reinforced structures - Discussion*JOURNAL OF COMPOSITES FOR CONSTRUCTION*

- Bogatyrev, VM; Borisenko, NV; Pokrovskii, VA

Thermal degradation of polyvinylpyrrolidone on the surface of pyrogenic silica*RUSSIAN JOURNAL OF APPLIED CHEMISTRY*

- Ziolkowski, RW

Superluminal transmission of information through an electromagnetic metamaterial - art. no. 046604*PHYSICAL REVIEW E*

- Gan, DJ; Lu, SQ; Wang, ZJ

Interpolymer covalent induced miscibility of silicon-containing copolymer with styrene-based copolymers*JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY*

- Ruosi, A; Valentino, M; Peluso, G; Pepe, G

Analysis of low-velocity impact damage in reinforced carbon fiber composites by HTS-SQUID magnetometers*IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY*

- Hsu, YG; Lin, KH; Hung, LM; Hua, CH; Hsieh, CH

Properties of PVA-PSA hybrid materials prepared through the incorporation of polysilicic acid (PSA) into polyvinyl alcohol*JOURNAL OF POLYMER RESEARCH-TAIWAN*

- Hsu, YG; Lin, KH

Preparation and properties of ABS-silica nanocomposites through sol-gel process under the catalyzation of different catalysts*JOURNAL OF POLYMER RESEARCH-TAIWAN*

- Grakovich, PN; Shelestova, VA

Plasma-chemical modification of carbon fibers as an efficient method of regulating properties of PTFE-based composite materials*SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY*

- Reddy, JN; Cheng, ZQ

Three-dimensional thermomechanical deformations of functionally graded rectangular plates*EUROPEAN JOURNAL OF MECHANICS A-SOLIDS*

- Niordson, CF; Tvergaard, V

Nonlocal plasticity effects on the tensile properties of a metal matrix composite*EUROPEAN JOURNAL OF MECHANICS A-SOLIDS*

- Oshima, A; Udagawa, A; Morita, Y

Application of radiation-crosslinked polytetrafluoroethylene to fiber-reinforced composite materials*RADIATION PHYSICS AND CHEMISTRY*

- Oshima, A; Udagawa, A; Morita, Y

Radiation processing for carbon fiber-reinforced polytetrafluoroethylene composite materials*RADIATION PHYSICS AND CHEMISTRY*

- Scanlon, MG; Zghal, MC

Bread properties and crumb structure*FOOD RESEARCH INTERNATIONAL*

- Castaings, M; Hosten, B

Lamb and SH waves generated and detected by air-coupled ultrasonic transducers in composite material plates*NDT & E INTERNATIONAL*

- Gandini, A; Botaro, V; Zeno, E; Bach, S

Activation of solid polymer surfaces with bifunctional reagents*POLYMER INTERNATIONAL*

- Gu, JD; Belay, B; Mitchell, R

Protection of catheter surfaces from adhesion of Pseudomonas aeruginosa bya combination of silver ions and lectins*WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY*

- Araujo, FM; Ferreira, LA; Santos, JL; Farahi, F

Temperature and strain insensitive bending measurements with D-type fibre Bragg gratings*MEASUREMENT SCIENCE & TECHNOLOGY*

- Huot, J; Liang, G; Schulz, R

Mechanically alloyed metal hydride systems*APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING*

- Miyagawa, H; Sato, C; Ikegami, K

Experimental determination of fracture toughness of CFRP by Raman Coating Method*ARCHIVE OF APPLIED MECHANICS*

- Kaminski, M

Material sensitivity analysis in homogenization of linear elastic composites*ARCHIVE OF APPLIED MECHANICS*

- Rozhkova, NN

Shungite - a carbon-mineral filler for polymeric composite materials*COMPOSITE INTERFACES*

- Schuler, A; Videnovic, IR; Oelhafen, P; Brunold, S

Titanium-containing amorphous hydrogenated silicon carbon films (a-Si : C : H/Ti) for durable solar absorber coatings*SOLAR ENERGY MATERIALS AND SOLAR CELLS*

- Albrecht, A; Cheung, SK; Leung, KS; Wong, CK

On the convergence of inhomogeneous Markov chains approximating equilibrium placements of flexible objects*COMPUTATIONAL OPTIMIZATION AND APPLICATIONS*

- Pourroy, G; Valles-Minguez, A; Dintzer, T; Richard-Plouet, M

Synthesis of Cu-0/Cu(II) substituted magnetite nanocomposites in aqueous media*JOURNAL OF ALLOYS AND COMPOUNDS*

- Wei, Q; Wang, DW; Zhang, SG; Chen, CS

Preparation and characterization of sol-gel-derived unsupported Al2O3-SiO2composite membranes*JOURNAL OF ALLOYS AND COMPOUNDS*

- Inoue, H; Miyauchi, R; Tanaka, T; Choi, WK; Shin-Ya, R; Murayama, JI; Iwakura, C

Effect of ball-milling with Ni and Raney Ni on surface structural characteristics of TiV2.1Ni0.3 alloy*JOURNAL OF ALLOYS AND COMPOUNDS*

- Sastry, S; Krishna, M; Uchil, J

A study on damping behaviour of aluminite particulate reinforced ZA-27 alloy metal matrix composites*JOURNAL OF ALLOYS AND COMPOUNDS*

- Lee, SH; Li, XP

Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide*JOURNAL OF MATERIALS PROCESSING TECHNOLOGY*

- Lee, CS; Oh, JH; Lee, DG; Choi, JH

A composite cantilever arm for guiding a moving wire in an electrical discharge wire cutting machine*JOURNAL OF MATERIALS PROCESSING TECHNOLOGY*

- Ku, HS; Siu, F; Siores, E; Ball, JAR; Blicblau, AS

Applications of fixed and variable frequency microwave (VFM) facilities inpolymeric materials processing and joining*JOURNAL OF MATERIALS PROCESSING TECHNOLOGY*

- Hsu, YG; Lin, KH; Chiang, IL

Organic-inorganic hybrid materials based on the incorporation of nanoparticles of polysilicic acid with organic polymers. 1. Properties of the hybrids prepared through the combination of hydroxyl-containing linear polyester and polysilicic acid*MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY*

Y.G. Hsu*et al.*, "Organic-inorganic hybrid materials based on the incorporation of nanoparticles of polysilicic acid with organic polymers. 1. Properties of the hybrids prepared through the combination of hydroxyl-containing linear polyester and polysilicic acid",*MAT SCI E B*, 87(1), 2001, pp. 31-39 - Cho, JR; Ha, DY

Averaging and finite-element discretization approaches in the numerical analysis of functionally graded materials*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Tchernogorova, OP; Bannykh, OA; Blinov, VM; Drozdova, EI; Dityat'ev, AA; Mel'nik, NN

Superhard carbon particles forming from fullerites in a mixture with iron powder*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Kondo, T; Yoshikado, S

Electromagnetic characteristics of a ceramic composite*JOURNAL OF THE CERAMIC SOCIETY OF JAPAN*

- Gao, Y; Choudhury, NR; Dutta, N; Matisons, J; Reading, M; Delmotte, L

Organic-inorganic hybrid from ionomer via sol-gel reaction*CHEMISTRY OF MATERIALS*

- Weiglhofer, WS

On the inverse homogenization problem of linear composite materials*MICROWAVE AND OPTICAL TECHNOLOGY LETTERS*

- Aboutajeddine, A; Vu-Khanh, T

Effective mechanical properties of materials with coated inclusions*JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS*

- Huang, ZM

A unified micromechanical model for the mechanical properties of two constituent composite materials. Part III: Strength behavior*JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS*

- Okeil, AM; El-Tawil, S; Shahawy, M

Short-term tensile strength of carbon fiber-reinforced polymer laminates for flexural strengthening of concrete girders*ACI STRUCTURAL JOURNAL*

- Assouline, E; Grigull, S; Marom, G; Wachtel, E; Wagner, HD

Morphology of alpha-transcrystalline isotactic polypropylene under tensilestress studied with synchrotron microbeam X-ray diffraction*JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS*

- Muh, E; Stieger, M; Klee, JE; Frey, H; Mulhaupt, R

Organic-inorganic hybrid networks by the sol-gel process and subsequent photopolymerization*JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY*

- Farlow, N; Galbraith, W; Kowles, M; Hayward, G

Micromachining of a piezocomposite transducer using a copper vapor laser*IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL*

- Asp, LE; Sjogren, A; Greenhalgh, ES

Delamination growth and thresholds in a carbon/epoxy composite under fatigue loading*JOURNAL OF COMPOSITES TECHNOLOGY & RESEARCH*

- Chujo, Y; Tamaki, R

New preparation methods for organic-inorganic polymer hybrids*MRS BULLETIN*

- Kersten, H; Deutsch, H; Stoffels, E; Stoffels, WW; Kroesen, GMW; Hippler, R

Micro-disperse particles in plasmas: From disturbing side effects to new applications*CONTRIBUTIONS TO PLASMA PHYSICS*

- Chew, KH; Ong, LH; Osman, J; Tilley, DR

Theory of far-infrared reflection and transmission by ferroelectric thin films*JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS*

- Rabinovitch, O; Frostig, Y

Nonlinear high-order analysis of cracked RC beams strengthened with FRP strips*JOURNAL OF STRUCTURAL ENGINEERING-ASCE*

- Haj-Ali, R; Pecknold, DA; Ghaboussi, J; Voyiadjis, GZ

Simulated micromechanical models using artificial neural networks*JOURNAL OF ENGINEERING MECHANICS-ASCE*

- Fish, J; Chen, W

Higher-order homogenization of initial/boundary-value problem*JOURNAL OF ENGINEERING MECHANICS-ASCE*

- Prusty, BG; Satsangi, SK; Ray, C

First ply failure analysis of laminated panels under transverse loading*JOURNAL OF REINFORCED PLASTICS AND COMPOSITES*

- Quaresimin, M; Guglielmino, E

Influence of quick ageing on the fatigue behaviour of SMC composite materials*JOURNAL OF REINFORCED PLASTICS AND COMPOSITES*

- Karthikeyan, CS; Kishore; Sankaran, S

Effect of absorption in aqueous and hygrothermal media on the compressive properties of glass fiber reinforced syntactic foam*JOURNAL OF REINFORCED PLASTICS AND COMPOSITES*

- Qiu, JH; Kawagoe, M; Mizuno, W; Morita, M; Kumazawa, T; Takahashi, Y

Combined effects of rolling and blending with liquid crystalline polyesteron the fatigue properties of polypropylene under high rolling ratio*KOBUNSHI RONBUNSHU*

- Shen, H; Schiavone, P; Ru, CQ; Mioduchowski, A

Stress analysis of an elliptic inclusion with imperfect interface in planeelasticity*JOURNAL OF ELASTICITY*

- Korf, LA; Wets, RJB

Random lsc functions: An ergodic theorem*MATHEMATICS OF OPERATIONS RESEARCH*

- Yap, AUJ; Ng, SC; Kiow, KS

Soft-start polymerization: Influence on effectiveness of cure and post-gelshrinkage*OPERATIVE DENTISTRY*

- Deniaud, C; Cheng, JJR

Review of shear design methods for reinforced concrete beams strengthened with fibre reinforced polymer sheets*CANADIAN JOURNAL OF CIVIL ENGINEERING*

- Dulieu-Barton, JM; Earl, JS; Shenoi, RA

Determination of the stress distribution in foam-cored sandwich construction composite tee joints*JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN*

- Han, B; Post, D; Ifju, P

Moire interferometry for engineering mechanics: current practices and future developments*JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN*

- Hwang, SF; Chang, CS; Chang, KL

Determination of elastic constants of transversely isotropic materials by combining vibration testing and numerical method*POLYMER COMPOSITES*

- Berger, L; Cantwell, WJ

Temperature and loading rate effects in the mode II interlaminar fracture behavior of carbon fiber reinforced PEEK*POLYMER COMPOSITES*

- Lakhtakia, MN; Lakhtakia, A

Anisotropic composite materials with intensity-dependent permittivity tensor: The Bruggeman approach*ELECTROMAGNETICS*

- Abry, JC; Choi, YK; Chateauminois, A; Dalloz, B; Giraud, G; Salvia, M

In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements*COMPOSITES SCIENCE AND TECHNOLOGY*

- Varna, J; Joffe, R; Talreja, R

A synergistic damage-mechanics analysis of transverse cracking in [+/-theta/90(4)](s) laminates*COMPOSITES SCIENCE AND TECHNOLOGY*

- Belmonte, HMS; Manger, CIC; Ogin, SL; Smith, PA; Lewin, R

Characterisation and modelling of the notched tensile fracture of woven quasi-isotropic GFRP laminates*COMPOSITES SCIENCE AND TECHNOLOGY*

- Tanoglu, M; McKnight, SH; Palmese, GR; Gillespie, JW

The effects of glass-fiber sizings on the strength and energy absorption of the fiber/matrix interphase under high loading rates*COMPOSITES SCIENCE AND TECHNOLOGY*

- Chun, HJ; Shin, JY; Daniel, IM

Effects of material and geometric nonlinearities on the tensile and compressive behavior of composite materials with fiber waviness*COMPOSITES SCIENCE AND TECHNOLOGY*

- Kayupov, M; Dzenis, YA

Stress concentrations caused by bond cracks in single-lap adhesive composite joints*COMPOSITE STRUCTURES*

- Soares, CMM; Soares, CAM; Correia, VMF; Loja, MAR

Higher-order B-spline strip models for laminated composite structures withintegrated sensors and actuators*COMPOSITE STRUCTURES*

- Muc, A; Kedziora, P

A fuzzy set analysis for a fracture and fatigue damage response of composite materials*COMPOSITE STRUCTURES*

- Shokrieh, MM; Behrooz, FT

Wing instability of a full composite aircraft*COMPOSITE STRUCTURES*

- Jansson, NE; Larsson, R

A damage model for simulation of mixed-mode delamination growth*COMPOSITE STRUCTURES*

- Chotard, TJ; Pasquiet, J; Benzeggagh, ML

Residual performance of scarf patch-repaired pultruded shapes initially impact damaged*COMPOSITE STRUCTURES*

- Al-Assaf, Y; El Kadi, H

Fatigue life prediction of unidirectional glass fiber/epoxy composite laminae using neural networks*COMPOSITE STRUCTURES*

- Ferreira, AJM; Camanho, PP; Marques, AT; Fernandes, AA

Modelling of concrete beams reinforced with FRP re-bars*COMPOSITE STRUCTURES*

- Loja, MAR; Soares, CMM; Soares, CAM

Higher-order B-spline finite strip model for laminated adaptive structures*COMPOSITE STRUCTURES*

ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici

Documento generato il 25/05/20 alle ore 13:39:51