Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'austenite' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 646 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Jacques, P; Furnemont, Q; Mertens, A; Delannay, F
      On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    2. Leem, DS; Lee, YD; Jun, JH; Choi, CS
      Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe-13%Cr-7%Ni-3%Si martensitic stainless steel

      SCRIPTA MATERIALIA
    3. Shin, HC; Ha, TK; Chang, YW
      Kinetics of deformation induced martensitic transformation in a 304 stainless steel

      SCRIPTA MATERIALIA
    4. Hurley, PJ; Hodgson, PD; Muddle, BC
      A study of deformation substructures in austenite using a model Ni-30 wt.%Fe alloy

      SCRIPTA MATERIALIA
    5. Zhou, Y; Aust, KT; Erb, U; Palumbo, G
      Effects of grain boundary structure on carbide precipitation in 304L stainless steel

      SCRIPTA MATERIALIA
    6. Girault, E; Mertens, A; Jacques, P; Houbaert, Y; Verlinden, B; Van Humbeeck, J
      Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase trip-assisted steels

      SCRIPTA MATERIALIA
    7. Sehitoglu, H; Karaman, I; Zhang, XY; Chumlyakov, Y; Maier, HJ
      Deformation of FeNiCoTi shape memory single crystals

      SCRIPTA MATERIALIA
    8. Khalid, FA
      Copper precipitation in M23C6 grain boundary carbides in alloy steel

      SCRIPTA MATERIALIA
    9. Capdevila, C; Caballero, FG; de Andres, CG
      Isothermal allotriomorphic ferrite formation kinetics in a medium carbon vanadium-titanium microalloyed steel

      SCRIPTA MATERIALIA
    10. Karaman, I; Sehitoglu, H; Chumlyakov, YI; Maier, HJ; Kireeva, IV
      Extrinsic stacking faults and twinning in Hadfield manganese steel single crystals

      SCRIPTA MATERIALIA
    11. Shivanyuk, VN; Shanina, BD; Tarasenko, AV; Gavriljuk, VG; Foct, J
      Effect of hydrogen on atomic bonds in austenitic stainless steel

      SCRIPTA MATERIALIA
    12. Thaveeprungsriporn, V; Sinsrok, P; Thong-Aram, D
      Effect of iterative strain annealing on grain boundary network of 304 stainless steel

      SCRIPTA MATERIALIA
    13. Capdevila, C; de Andres, CG; Caballero, FG
      Incubation time of isothermally transformed allotriomorphic ferrite in medium carbon steels

      SCRIPTA MATERIALIA
    14. Poths, RM; Higginson, RL; Palmiere, EJ
      Complex precipitation behaviour in a microalloyed plate steel

      SCRIPTA MATERIALIA
    15. Yang, R; Zhao, DL; Wang, YM; Wang, SQ; Ye, HQ; Wang, CY
      Effects of Cr, Nn on the cohesion of the gamma-iron grain boundary

      ACTA MATERIALIA
    16. Zaefferer, S; Baudin, T; Penelle, R
      A study on the formation mechanisms of the cube recrystallization texture in cold rolled Fe-36%Ni alloys

      ACTA MATERIALIA
    17. Dutta, B; Palmiere, EJ; Sellars, CM
      Modelling the kinetics of strain induced precipitation in Nb microalloyed steels

      ACTA MATERIALIA
    18. Monchoux, JP; Verdu, C; Thollet, G; Fougeres, R; Reynaud, A
      Morphological changes of graphite spheroids during heat treatment of ductile cast irons

      ACTA MATERIALIA
    19. Heino, S; Karlsson, B
      Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitic stainless steel-stress-strain relations and fatigue life

      ACTA MATERIALIA
    20. Heino, S; Karlsson, B
      Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitic stainless steel-slip characteristics and development of dislocation structures

      ACTA MATERIALIA
    21. Lee, EH; Byun, TS; Hunn, JD; Yoo, MH; Farrell, K; Mansur, LK
      On the origin of deformation microstructures in austenitic stainless steel: Part I - Microstructures

      ACTA MATERIALIA
    22. Lee, EH; Yoo, MH; Byun, TS; Hunn, JD; Farrell, K; Mansur, LK
      On the origin of deformation microstructures in austenitic stainless steel: Part II - Mechanisms

      ACTA MATERIALIA
    23. Tsuchida, N; Tomota, Y; Moriya, H; Umezawa, O; Nagai, K
      Application of the Kocks-Mecking model to tensile deformation of an austenitic 25Cr-19Ni steel

      ACTA MATERIALIA
    24. Kobayashi, S; Nakai, K; Ohmori, Y
      Isothermal decomposition of delta-ferrite in a 25Cr-7Ni-0.14N stainless steel

      ACTA MATERIALIA
    25. Zakroczymski, T; Flis, J; Lukomski, N; Mankowski, J
      Entry, transport and absorption of hydrogen in low-temperature plasma nitrided austenitic stainless steel

      ACTA MATERIALIA
    26. Jacques, P; Furnemont, Q; Pardoen, T; Delannay, F
      On the role of martensitic transformation on damage and cracking resistance in trip-assisted multiphase steels

      ACTA MATERIALIA
    27. Park, KT; Kim, YS; Shin, DH
      Microstructural stability of ultrafine grained low-carbon steel containingvanadium fabricated by intense plastic straining

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    28. Capdevila, C; Caballero, FG; De Andres, CG
      Modeling of kinetics of isothermal idiomorphic ferrite formation in a medium-carbon vanadium-titanium microalloyed steel

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    29. Ariapour, A; Yakubtsov, I; Perovic, DD
      Shape-memory effect and strengthening mechanism in a Nb and N-doped Fe-Mn-Si-based alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    30. Charleux, M; Poole, WJ; Militzer, M; Deschamps, A
      Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    31. Wittridge, NJ; Jonas, JJ; Root, JH
      A dislocation-based model for variant selection during the gamma-to-alpha ' transformation

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    32. Ghosh, G; Olson, GB
      Simulation of paraequilibrium growth in multicomponent systems

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    33. Kim, SJ; Lee, CG; Choi, I; Lee, S
      Effects of heat treatment and alloying elements on the microstructures andmechanical properties of 0.15 wt pct C transformation-induced plasticity-aided cold-rolled steel sheets

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    34. Lee, BJ
      Thermodynamic assessment of the Fe-Nb-Ti-C-N system

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    35. Ben Rhouma, A; Braham, C; Fitzpatrick, ME; Ledion, J; Sidhom, H
      Effects of surface preparation on pitting resistance, residual stress, andstress corrosion cracking in austenitic stainless steels

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    36. Hsieh, RI; Liou, HY; Pan, YT
      Effects of cooling time and alloying elements on the microstructure of thegleeble-simulated heat-affected zone of 22% Cr duplex stainless steels

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    37. Mason, PW; Prevey, PS
      Iterative Taguchi analysis: Optimizing the austenite content and hardness in 52100 steel

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    38. Ghosh, G; Olson, GB
      Computational thermodynamics and the kinetics of martensitic transformation

      JOURNAL OF PHASE EQUILIBRIA
    39. de Andres, CG; Bartolome, MJ; Capdevila, C; Martin, DS; Caballero, FG; Lopez, V
      Metallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels

      MATERIALS CHARACTERIZATION
    40. Bilmes, PD; Solari, M; Llorente, CL
      Characteristics and effects of austenite resulting from tempering of 13Cr-NiMo martensitic steel weld metals

      MATERIALS CHARACTERIZATION
    41. Ford, SI; Munroe, PR; Young, DJ
      Microstructural analysis of carbonitrided austenitic steels

      MICRON
    42. Timoshevskii, AN; Timoshevskii, VA; Yanchitsky, BZ
      The influence of carbon and nitrogen on the electronic structure and hyperfine interactions in face-centred-cubic iron-based alloys

      JOURNAL OF PHYSICS-CONDENSED MATTER
    43. Yang, R; Wang, YM; Ye, HQ; Wang, CY
      First-principles study of the segregation effects on the cohesion of FCC grain boundary

      JOURNAL OF PHYSICS-CONDENSED MATTER
    44. Reti, T; Fried, Z; Felde, I
      Computer simulation of steel quenching process using a multi-phase transformation model

      COMPUTATIONAL MATERIALS SCIENCE
    45. Garlipp, W; Cilense, M; Gomes, SIN
      Austenite decomposition of C-Mn steel containing boron by continuous cooling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    46. Saleh, MH; Priestner, R
      Retained austenite in dual-phase silicon steels and its effect on mechanical properties

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    47. Dobrzanski, LA; Kasprzak, W
      The influence of 5% cobalt addition on structure and working properties ofthe 9-2-2-5, 11-2-2-5 and 11-0-2-5 high-speed steels

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    48. Kopac, J
      Hardening phenomena of Mn-austenite steels in the cutting process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    49. Wang, DF; Liu, DZ; Dong, ZZ; Liu, WX; Chen, JM
      Improvement of shape memory effect by ausforming in Fe-28Mn-6Si-5Cr alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    50. Mateo, A; Girones, A; Keichel, J; Llanes, L; Akdut, N; Anglada, M
      Cyclic deformation behaviour of superduplex stainless steels

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    51. Zhao, L; van Dijk, NH; Bruck, E; Sietsma, J; van der Zwaag, S
      Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    52. Furuhara, T; Maki, T
      Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    53. Kim, SI; Yoo, YC
      Dynamic recrystallization behavior of AISI 304 stainless steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    54. Yescas, MA; Bhadeshia, HKDH; MacKay, DJ
      Estimation of the amount of retained austenite in austempered ductile irons using neural networks

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    55. Garcia-Mateo, C; Lopez, B; Rodriguez-Ibabe, JM
      Static recrystallization kinetics in warm worked vanadium microalloyed steels

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    56. Pereloma, EV; Crawford, BR; Hodgson, PD
      Strain-induced precipitation behaviour in hot rolled strip steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    57. Balachandran, G; Bhatia, ML; Ballal, NB; Rao, PK
      Some theoretical aspects on designing nickel free high nitrogen austeniticstainless steels

      ISIJ INTERNATIONAL
    58. Hanlon, DN; Sietsma, J; van der Zwaag, S
      The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation

      ISIJ INTERNATIONAL
    59. van Leeuwen, Y; Onink, M; Sietsma, J; van der Zwaag, S
      The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling conditions

      ISIJ INTERNATIONAL
    60. Jacques, PJ; Girault, E; Harlet, P; Delannay, F
      The developments of cold-rolled TRIP-assisted multiphase steels. Low silicon TRIP-assisted multiphase steels

      ISIJ INTERNATIONAL
    61. Jacques, PJ; Girault, E; Mertens, A; Verlinden, B; van Humbeeck, J; Delannay, F
      The developments of cold-rolled TRIP-assisted multiphase steels. Al-alloyed TRIP-assisted multiphase steels

      ISIJ INTERNATIONAL
    62. Wilson, EA; Shtansky, DV; Ohmori, Y
      A kinetic and electronmicroscopic study of transformations in continuouslycooled Fe-15%Ni alloys

      ISIJ INTERNATIONAL
    63. Cho, SH; Kang, KB; Jonas, JJ
      Mathematical modeling of the recrystallization kinetics of Nb microalloyedsteels

      ISIJ INTERNATIONAL
    64. Medina, SF; Quispe, A
      Improved model for static recrystallization kinetics of hot deformed austenite in low alloy and Nb/V microalloyed steels

      ISIJ INTERNATIONAL
    65. Senuma, T
      Physical metallurgy of modern high strength steel sheets

      ISIJ INTERNATIONAL
    66. Ohmori, Y
      Microstructural evolutions with precipitation of carbides in steels

      ISIJ INTERNATIONAL
    67. Hertzman, S
      The influence of nitrogen on microstructure and properties of highly alloyed stainless steel welds

      ISIJ INTERNATIONAL
    68. Morris, JW; Guo, Z; Krenn, CR; Kim, YH
      The limits of strength and toughness in steel

      ISIJ INTERNATIONAL
    69. Masuyama, F
      History of power plants and progress in heat resistant steels

      ISIJ INTERNATIONAL
    70. Zhao, JZ; Mesplont, C; De Cooman, BC
      Kinetics of phase transformations in steels: A new method for analysing dilatometric results

      ISIJ INTERNATIONAL
    71. Baik, SC; Kim, S; Jin, YS; Kwon, O
      Effects of alloying elements on mechanical properties and phase transformation of cold rolled TRIP steel sheets

      ISIJ INTERNATIONAL
    72. Capidevila, C; Caballero, FG; de Andres, CG
      Modelling of kinetics of isothermal allotriomorphic and idiomorphic ferrite formation in medium carbon vanadium-titanium microalloyed steel

      ISIJ INTERNATIONAL
    73. Li, Y; Crowther, DN; Green, MJW; Mitchell, PS; Baker, TN
      The effect of vanadium and niobium on the properties and microstructure ofthe intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels

      ISIJ INTERNATIONAL
    74. Cho, SH; Kang, KB; Jonas, JJ
      The dynamic, static and metadynamic recrystallization of a Nb-microalloyedsteel

      ISIJ INTERNATIONAL
    75. Baydogan, M; Cimenoglu, H
      The effect of austempering time on mechanical properties of a ductile iron

      SCANDINAVIAN JOURNAL OF METALLURGY
    76. Venkatraman, M; Mohanty, ON; Ghosh, RN
      Modelling of transformation kinetics in HSLA 100 steel during continuous cooling

      SCANDINAVIAN JOURNAL OF METALLURGY
    77. DeArdo, AJ
      Metallurgical basis for thermomechanical processing of microalloyed steels

      IRONMAKING & STEELMAKING
    78. Hutchinson, B
      Microstructure development during cooling of hot rolled steels

      IRONMAKING & STEELMAKING
    79. Pereloma, EV; Timokhina, IB; Hodgson, PD
      Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels

      IRONMAKING & STEELMAKING
    80. Labib, HF; Youssef, YM; Dashwood, RJ; Lee, PD
      Instrumentation and simulation of industrial steel wire rod cooling line

      MATERIALS SCIENCE AND TECHNOLOGY
    81. Caballero, FG; Capdevila, C; de Andres, CG
      Modelling of isothermal formation of pearlite and subsequent reaustenitisation in eutectoid steel during continuous heating

      MATERIALS SCIENCE AND TECHNOLOGY
    82. Caballero, FG; Bhadeshia, HKDH; Mawella, KJA; Jones, DG; Brown, P
      Design of novel high strength bainitic steels: Part 1

      MATERIALS SCIENCE AND TECHNOLOGY
    83. Medina, SF; Quispe, A; Gomez, M
      Model for static recrystallisation critical temperature in microalloyed steels

      MATERIALS SCIENCE AND TECHNOLOGY
    84. van der Wolk, PJ; Sietsma, J; Parker, SV
      Evaluation of semiphysical phase transformation model for engineering steels using measured continuous cooling transformation diagrams

      MATERIALS SCIENCE AND TECHNOLOGY
    85. Timokhina, IB; Pereloma, EV; Hodgson, PD
      Microstructure and mechanical properties of C-Si-Mn(-Nb) TRIP steels aftersimulated thermomechanical processing

      MATERIALS SCIENCE AND TECHNOLOGY
    86. Liu, CC; Ju, DY; Yao, KF; Liu, Z; Xu, XJ
      Bainitic transformation kinetics and stress assisted transformation

      MATERIALS SCIENCE AND TECHNOLOGY
    87. Di Nunzio, PE
      Evaluation of chemical nucleation driving force for stoichiometric compounds with variable composition

      MATERIALS SCIENCE AND TECHNOLOGY
    88. Blawert, C; Kalvelage, H; Mordike, BL; Collins, GA; Short, KT; Jiraskova, Y; Schneeweiss, O
      Nitrogen and carbon expanded austenite produced by PI3

      SURFACE & COATINGS TECHNOLOGY
    89. Akamatsu, H; Ikeda, T; Azuma, K; Fujiwara, E; Yatsuzuka, M
      Surface treatment of steel by short pulsed injection of high-power ion beam

      SURFACE & COATINGS TECHNOLOGY
    90. Panigrahi, BK
      Processing of low carbon steel plate and hot strip - an overview

      BULLETIN OF MATERIALS SCIENCE
    91. Varma, MR; Sasikumar, R; Pillai, SGK; Nair, PK
      Cellular automaton simulation of microstructure evolution during austenitedecomposition under continuous cooling conditions

      BULLETIN OF MATERIALS SCIENCE
    92. Phaniraj, M; Shamasundar, S; Lahiri, AK
      Relevance of ROT control for hot rolled low carbon steels

      STEEL RESEARCH
    93. Hammer, B; Kawalla, R; Reip, CP
      Influence of residuals on the metallurgical features of low carbon steel grades

      STEEL RESEARCH
    94. ElMahallawi, IS
      Morphology and identification of carbides in aged W-alloyed austenitic stainless steel

      MATERIALS LETTERS
    95. Hu, MJ; Pan, JS; Zhu, ZC; Qiu, CC
      A special phase transformation phenomenon in high-nitrogen austenite

      MATERIALS LETTERS
    96. Zhao, JZ; Mesplont, C; De Cooman, BC
      A model for the calculation of the bainitic phase transformation kinetics from dilatometric data

      ZEITSCHRIFT FUR METALLKUNDE
    97. Li, CM; Sommer, F; Mittemeijer, EJ
      Quantitative dilatometric analysis of the isothermal decomposition of hypereutectoid Fe-C austenite

      ZEITSCHRIFT FUR METALLKUNDE
    98. Hanlon, DN; Todd, I; Peekstok, E; Rainforth, WM; van der Zwaag, S
      The application of laser scanning confocal microscopy to tribological research

      WEAR
    99. Zhou, R; Jiang, YH; Lu, DH; Zhou, RF; Li, ZH
      Development and characterization of a wear resistant bainite/martensite ductile iron by combination of alloying and a controlled cooling heat-treatment

      WEAR
    100. Montes, CC; Caballero, FG; de Andres, CG
      Modelling of isothermal formation of allotriomorphic ferrite transformation at temperatures below the eutectoid in a medium carbon microalloyed steel

      REVISTA DE METALURGIA


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 12/08/20 alle ore 15:16:55