Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'aluminum alloy' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 852 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Laukkanen, A
      Analysis of experimental factors in elastic-plastic small specimen mixed-mode I-II fracture mechanical testing

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    2. Alonso, F; Yus, M
      Catalytic hydrogenation of organic compounds using the NiCl2-Li-naphthalene (cat.) combination

      ADVANCED SYNTHESIS & CATALYSIS
    3. Hosokawa, H; Higashi, K
      Materials design for industrial forming process in high-strain-rate superplastic Al-Si alloy

      MATERIALS RESEARCH INNOVATIONS
    4. Nishida, Y; Arima, H; Kim, JC; Ando, T
      Rotary-die equal-channel angular pressing of an A1-7 mass% Si-0.35 mass% Mg alloy

      SCRIPTA MATERIALIA
    5. Sato, YS; Urata, M; Kokawa, H; Ikeda, K; Enomoto, M
      Retention of fine grained microstructure of equal channel angular pressed aluminum alloy 1050 by friction stir welding

      SCRIPTA MATERIALIA
    6. Kawamura, Y; Mano, H; Inoue, A
      Nanocrystalline aluminum bulk alloys with a high strength of 1420 MPa produced by the consolidation of amorphous powders

      SCRIPTA MATERIALIA
    7. Akamatsu, H; Fujinami, T; Horita, Z; Langdon, TG
      Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP

      SCRIPTA MATERIALIA
    8. Sakai, T; Hamada, S; Saito, Y
      Improvement of the r-value in 5052 aluminum alloy sheets having through-thickness shear texture by 2-pass single-roll drive unidirectional shear rolling

      SCRIPTA MATERIALIA
    9. Shen, YL; Williams, JJ; Piotrowski, G; Chawla, N; Guo, YL
      Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: An experimental and numerical study

      ACTA MATERIALIA
    10. Matsuo, Y; Nishimura, Y; Yamamoto, K; Ishii, Y
      Relationship between phason strain and approximant crystal structure in Co-rich Al-Ni-Co decagonal phase

      MATERIALS TRANSACTIONS
    11. Ishihara, S; Inoue, A
      Superplastic deformation of supercooled liquid in Zr-based bulk glassy alloys containing nano-quasicrystalline particles

      MATERIALS TRANSACTIONS
    12. Kamiyama, T; Kimura, H; Sasamori, K; Inoue, A
      Nanometer-scale structure of rapidly solidified Al92V3Fe3Zr2 alloy

      MATERIALS TRANSACTIONS
    13. Sasaki, H; Kita, K; Nagahora, J; Inoue, A
      Nanostructures and mechanical properties of bulk Al-Fe alloys prepared by electron-beam deposition

      MATERIALS TRANSACTIONS
    14. Okumiya, M; Tsunekawa, Y; Fukaya, K; Mohri, N
      Formation of TiC/Ti2AlC composite layer and improvement on surface roughness

      MATERIALS TRANSACTIONS
    15. Iwasaki, H; Kariya, R; Mabuchi, M; Tagata, T; Higashi, K
      Effects of temperature and strain rate on elongation at elevated temperature in Al-4.5Mg alloy

      MATERIALS TRANSACTIONS
    16. Kanahashi, H; Mukai, T; Yamada, Y; Shimojima, K; Mabuchi, M; Aizawa, T; Higashi, K
      Improvement of crashworthiness in ultra lightweight metallic foam by heat-treatment for microstructural modification of base material

      MATERIALS TRANSACTIONS
    17. Miyoshi, T; Hara, S; Mukai, T; Higashi, K
      Development of a closed cell aluminum alloy foam with enhancement of the compressive strength

      MATERIALS TRANSACTIONS
    18. Zolochevsky, A; Obataya, Y
      Tension-compression asymmetry of creep and unilateral creep damage in aluminum for isothermal and nonisothermal processes

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    19. Akbari, AA; Higuchi, S
      Optimum machining conditions for mirror polishing of aluminum alloy using a robot

      JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING
    20. Cho, YT
      Elastic analysis of a cracked ellipsoidal inhomogeneity in an infinite body

      KSME INTERNATIONAL JOURNAL
    21. Jones, RH; Baer, DR; Danielson, MJ; Vetrano, JS
      Role of Mg in the stress corrosion cracking of an Al-Mg alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    22. Eddahbi, M; McNelley, TR; Ruano, OA
      The evolution of grain boundary character during superplastic deformation of an Al-6 pct Cu-0.4 pct Zr alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    23. Watanabe, H; Mukai, T; Higashi, K
      Microstructural factors affecting superplastic properties in magnesium-based composites

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    24. Kwon, Y; Chang, Y
      Effects of strain accumulation on the superplastic deformation behavior of7075 AL alloy

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    25. Horstemeyer, MF
      Mapping failure by microstructure-property modeling

      JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    26. Ramos, JA; Magee, J; Watkins, KG
      Microstructure and microhardness study of laser bent Al-2024-T3

      JOURNAL OF LASER APPLICATIONS
    27. Love, G; Scott, VD
      Phase identification of microfeatures using EPMA methods, especially high-resolution X-ray spectroscopy

      MICRON
    28. Yoshida, S; Toyooka, S
      Field theoretical interpretation on dynamics of plastic deformation - Portevin-Le Chatelie effect and propagation of shear band

      JOURNAL OF PHYSICS-CONDENSED MATTER
    29. Song, RG; Zhang, QZ
      Heat treatment optimization for 7175 aluminum alloy by genetic algorithm

      MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS
    30. Song, RG; Zhang, QZ
      Heat treatment optimization for 7175 aluminum alloy by evolutionary algorithm

      MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS
    31. Song, RG; Zhang, QZ
      Heat treatment technique optimization for 7175 aluminum alloy by an artificial neural network and a genetic algorithm

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    32. Badini, C; La Vecchia, GM; Fino, P; Valente, T
      Forging of 2124/SiCp composite: preliminary studies of the effects on microstructure and strength

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    33. Park, JO; Kim, KJ; Kang, DY; Lee, Y; Kim, YH
      An experimental study on the optimization of powder forging process parameters for an aluminum-alloy piston

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    34. Chang, SC; Wang, CC; Huang, CA; Chang, Y; Chen, TL
      Fabrication of 2024 aluminum spun tube using a thermomechanical treatment process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    35. Yaguchi, H; Mitani, H; Nagano, K; Fujii, T; Kato, A
      Fatigue-damage evaluation in aluminum heat-transfer tubes by measuring dislocation cell-wall thickness

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    36. Yoshida, S; Mizushima, T; Makino, A; Inoue, A
      Structure and soft magnetic properties of bulk Fe-Al-Ga-P-C-B-Si glassy alloys prepared by consolidating amorphous powders

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    37. Boselli, J; Pitcher, PD; Gregson, PJ; Sinclair, I
      Numerical modelling of particle distribution effects on fatigue in Al-SiCpcomposites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    38. Chen, CL; Tan, MJ
      Cavity growth and filament formation of superplastically deformed Al 7475 Alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    39. Shen, YL; Chawla, N
      On the correlation between hardness and tensile strength in particle reinforced metal matrix composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    40. Martin, CF; Blandin, JJ; Salvo, L
      Variations in microstructure and texture during high temperature deformation of Al-Mg alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    41. Takada, Y; Kudoh, M; Noguchi, T
      Crystallization of droplets in pure Al and Al-Cu alloy

      MATERIALS TRANSACTIONS JIM
    42. Ohmi, T; Kirihara, K; Kudoh, M
      Precision casting of Ni-Al alloy and simultaneous joining to dissimilar metals by modified centrifugal combustion synthesis

      MATERIALS TRANSACTIONS JIM
    43. Kobayashi, T; Toda, H
      Fracture in complex microstructures

      MATERIALS TRANSACTIONS JIM
    44. Kim, WJ; Kum, DW; Jeong, HG
      Interface structure and solute segregation behavior in SiC/2124 and SiC/6061 Al composites exhibiting high-strain-rate superplasticity

      JOURNAL OF MATERIALS RESEARCH
    45. Mohammadi, R; Mahmudi, R
      Ductile tearing energy of sheet metals determined by the multiple tensile testing (MTT) method

      INTERNATIONAL JOURNAL OF PLASTICITY
    46. Goryacheva, IG; Rajeev, PT; Farris, TN
      Wear in partial slip contact

      JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
    47. Gomba, JM; D'Angelo, C; Bertuccelli, D; Bertuccelli, G
      Spectroscopic characterization of laser induced breakdown in aluminium-lithium alloy samples for quantitative determination of traces

      SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
    48. Detalle, V; Heon, R; Sabsabi, M; St-Onge, L
      An evaluation of a commercial Echelle spectrometer with intensified charge-coupled device detector for materials analysis by laser-induced plasma spectroscopy

      SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
    49. Perucki, M; Chandrasekhar, P
      Corrosion protection of aluminum alloys by coatings of unique poly(diphenyl amine)-derivative conducting polymers

      SYNTHETIC METALS
    50. Carlson, RL; Steadman, DL; Kardomaters, GA
      An examination of small fatigue crack morphology

      INTERNATIONAL JOURNAL OF FRACTURE
    51. Yang, JG; Ou, BL
      Hot ductility behavior and HAZ hot cracking susceptibility of 7475-T7351 aluminum alloy

      SCANDINAVIAN JOURNAL OF METALLURGY
    52. Du, YJ; Damron, M; Tang, G; Zheng, HX; Chu, CJ; Osborne, JH
      Inorganic/organic hybrid coatings for aircraft aluminum alloy substrates

      PROGRESS IN ORGANIC COATINGS
    53. Voevodin, NN; Grebasch, NT; Soto, WS; Kasten, LS; Grant, JT; Arnold, FE; Donley, MS
      An organically modified zirconate film as a corrosion-resistant treatment for aluminum 2024-T3

      PROGRESS IN ORGANIC COATINGS
    54. Li, ZQ; Wu, BY; Zhang, SY
      Pretreatment process of SiC particles and fabrication technology of SiC particulate reinforced Zn-Al alloy matrix composite

      MATERIALS SCIENCE AND TECHNOLOGY
    55. Li, ZQ; Zhang, SY; Wu, BY
      Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

      MATERIALS SCIENCE AND TECHNOLOGY
    56. Scarber, P; Janowski, GM
      Finite element analysis of reinforcement particle cracking in Al/SiCP composites

      MATERIALS SCIENCE AND TECHNOLOGY
    57. Varma, VK; Kamat, SV; Kutumbarao, VV
      Tensile behaviour of powder metallurgy processed (Al-Cu-Mg)/SiCp composites

      MATERIALS SCIENCE AND TECHNOLOGY
    58. Montanari, R; Sili, A; Costanza, G
      Improvement of the fatigue behaviour of Al 6061/20% SiCp composites by means of titanium coatings

      COMPOSITES SCIENCE AND TECHNOLOGY
    59. Li, ZQ; Zhang, XR; Zhang, SY; Shen, ZH
      Determination of the elastic constants of metal-matrix composites by a laser ultrasound technique

      COMPOSITES SCIENCE AND TECHNOLOGY
    60. Duwel, AHC; Mussert, KM; Janssen, M; Bakker, A; Van der Zwaag, S
      A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3

      JOURNAL OF MATERIALS SCIENCE LETTERS
    61. Chong, PH; Man, HC; Yue, TM
      Microstructure and wear properties of laser surface-cladded Mo-WC MMC on AA6061 aluminum alloy

      SURFACE & COATINGS TECHNOLOGY
    62. Okumiya, M; Tsunekawa, Y; Murayama, T
      Surface modification of aluminum using ion nitriding and fluidized bed

      SURFACE & COATINGS TECHNOLOGY
    63. Nakata, K; Ushio, M
      Wear resistance of plasma sprayed Al-Si binary alloy coatings on A6063 Al alloy substrate

      SURFACE & COATINGS TECHNOLOGY
    64. Tomida, S; Nakata, K; Saji, S; Kubo, T
      Formation of metal matrix composite layer on aluminum alloy with TiC-Cu powder by laser surface alloying process

      SURFACE & COATINGS TECHNOLOGY
    65. Zhang, X; Lo Russo, S; Miotello, A; Guzman, L; Cattaruzza, E; Bonora, PL; Benedetti, L
      The corrosion behavior of Zn coatings on Al-3103 alloy

      SURFACE & COATINGS TECHNOLOGY
    66. Kasten, LS; Grant, JT; Grebasch, N; Voevodin, N; Arnold, FE; Donley, MS
      An XPS study of cerium dopants in sol-gel coatings for aluminum 2024-T3

      SURFACE & COATINGS TECHNOLOGY
    67. Voevodin, NN; Grebasch, NT; Soto, WS; Arnold, FE; Donley, MS
      Potentiodynamic evaluation of sol-gel coatings with inorganic inhibitors

      SURFACE & COATINGS TECHNOLOGY
    68. Voevodin, N; Jeffcoate, C; Simon, L; Khobaib, M; Donley, M
      Characterization of pitting corrosion in bare and sol-gel coated aluminum 2024-T3 alloy

      SURFACE & COATINGS TECHNOLOGY
    69. Moffitt, CE; Wieliczka, DM; Yasuda, HK
      An XPS study of the elemental enrichment on aluminum alloy surfaces from chemical cleaning

      SURFACE & COATINGS TECHNOLOGY
    70. Yamanishi, T; Hara, Y; Morita, R; Azuma, K; Fujiwara, E; Yatsuzuka, M
      Profile of implanted nitrogen ions in Al alloy for mold materials

      SURFACE & COATINGS TECHNOLOGY
    71. Chan, KC; Tong, GQ
      Strain rate sensitivity of a high-strain-rate superplastic Al6061/20SiC(W)composite under uniaxial and equibiaxial tension

      MATERIALS LETTERS
    72. Jiang, CH; Wu, JS
      Actual bearing stress of matrix in the Al18B4O33 fiber/6061Al composite under uniaxial tensile loading

      MATERIALS LETTERS
    73. Chow, KK; Chan, KC
      The cavitation behavior of a coarse-grained A15052 alloy under hot uniaxial and equibiaxial tension

      MATERIALS LETTERS
    74. Chidambaram, D; Halada, GP
      Infrared microspectroscopic studies on the pitting of AA2024-T3 induced byacetone degreasing

      SURFACE AND INTERFACE ANALYSIS
    75. Zheng, XL
      On some basic problems of fatigue research in engineering

      INTERNATIONAL JOURNAL OF FATIGUE
    76. Zettl, B; Mayer, H; Stanzl-Tschegg, SE
      Fatigue properties of Al-1Mg-0.6Si foam at low and ultrasonic frequencies

      INTERNATIONAL JOURNAL OF FATIGUE
    77. Banhart, J
      Manufacture, characterisation and application of cellular metals and metalfoams

      PROGRESS IN MATERIALS SCIENCE
    78. Zhang, TC; Li, DY
      Improvement in the resistance of aluminum with yttria particles to slidingwear in air and in a corrosive medium

      WEAR
    79. Sun, JY; Weng, LJ; Xue, QJ
      Duplex treatment for surface improvement of 2024 Al

      VACUUM
    80. Zinke, OH; Schmidt, WF; Lovett, JT
      Thickness, alloy content and cracks in aluminum measured by an alternatingcurrent magnetic bridge

      MATERIALS EVALUATION
    81. Chen, C; Fleck, NA; Lu, TJ
      The mode I crack growth resistance of metallic foams

      JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
    82. Maslar, JE; Hurst, WS; Bowers, WJ; Hendricks, JH
      In situ Raman spectroscopic investigation of zirconium-niobium alloy corrosion under hydrothermal conditions

      JOURNAL OF NUCLEAR MATERIALS
    83. Parashivamurthy, KI; Kumar, RK; Seetharamu, S; Chandrasekharaiah, MN
      Review on TiC reinforced steel composites

      JOURNAL OF MATERIALS SCIENCE
    84. Benedetti, AV; Cabot, PL; Garrido, JA; Moreira, AH
      Influence of iron addition on the microstructure and the electrochemical corrosion of Al-Zn-Mg alloys

      JOURNAL OF APPLIED ELECTROCHEMISTRY
    85. Mori, H; Nakanishi, K; Tachikawa, H
      Tribological properties and microstructure of sprayed high silicon aluminum alloy coatings

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    86. Aizawa, T; Luangvaranunt, T; Kondoh, K
      Solid state recycling from green wastes to aluminum alloys with high material efficiency

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    87. Kumagai, N; Sasaki, H; Kita, K; Nagahora, J; Inoue, A
      Precipitation hardening and microstructure evaluation of vapor quenched Al-Ti alloys by transmission electron microscope

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    88. Ikeno, S; Matsui, H; Matsuda, K; Terayama, K; Uetani, Y
      DSC measurement and HRTEM observation of precipitates in an Al-1.6 mass%Mg2Si alloy

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    89. Ohmi, T; Murota, Y; Kirihara, K; Kudoh, M
      Centrifugal casting of Ni-Al intermetallic compounds produced by thermite-type combustion synthesis

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    90. Ohmi, T; Yanoma, J; Kudoh, M
      Melting behavior of reaction products during thermite-type combustion synthesis of Ni-Al intermetallic compounds

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    91. Yamada, K; Sato, T
      Role of quenched-in excess vacancies in two-step aging behavior of Al-Mg-Si alloys

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    92. Nakayama, Y
      Relation between precipitation and serration in Al-10%Mg alloy

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    93. Toda, H; Kobayashi, T; Takahashi, A; Hoshiyama, A
      Numerical simulation of fracture induced by damage of intermetallic particles in wrought aluminum alloy

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    94. Fan, JH; McDowell, DL; Horstemeyer, MF; Gall, K
      Computational micromechanics analysis of cyclic crack-tip behavior for micro structurally small cracks in dual-phase Al-Si alloys

      ENGINEERING FRACTURE MECHANICS
    95. Shi, P; Mahadevan, S
      Damage tolerance approach for probabilistic pitting corrosion fatigue lifeprediction

      ENGINEERING FRACTURE MECHANICS
    96. Pirondi, A; Donne, CD
      Characterisation of ductile mixed-mode fracture with the crack-tip displacement vector

      ENGINEERING FRACTURE MECHANICS
    97. de Wit, JHW
      New knowledge on localized corrosion obtained from local measuring techniques

      ELECTROCHIMICA ACTA
    98. Guillaumin, V; Schmutz, P; Frankel, GS
      Characterization of corrosion interfaces by the scanning Kelvin probe force microscopy technique

      JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    99. Ilevbare, GO; Scully, JR
      Oxygen reduction reaction kinetics on chromate conversion coated Al-Cu, Al-Cu-Mg, and Al-Cu-Mn-Fe intermetallic compounds

      JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    100. Brown, GM; Kobayashi, K
      Nucleation and growth of a chromate conversion coating on aluminum alloy AA 2024-T3

      JOURNAL OF THE ELECTROCHEMICAL SOCIETY


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 27/01/21 alle ore 19:18:55