Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'TIAL ALLOYS' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 80 riferimenti
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Li, ZW; Gao, W; He, YD
      Protection of a Ti(3)AI-Nb alloy by electro-spark deposition coating

      SCRIPTA MATERIALIA
    2. Cao, CH; Shen, GJ; Liu, ZG; Liu, JM
      Microstructural characterization of V-doped single-phase titanium aluminide

      SCRIPTA MATERIALIA
    3. Stein, F; Zhang, LC; Sauthoff, G; Palm, M
      TEM and DTA study on the stability of Al5Ti3- and h-Al2Ti-superstructures in aluminium-rich TiAl alloys

      ACTA MATERIALIA
    4. Park, HS; Hwang, SK; Lee, CM; Yoo, YC; Nam, SW; Kim, NJ
      Microstructural refinement and mechanical properties improvement of elemental powder metallurgy processed Ti-46.6Al-1.4Mn-2Mo alloy by carbon addition

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    5. Zhang, XD; Zhang, H; Grylls, RJ; Lienert, TJ; Brice, C; Fraser, HL; Keicher, DM; Schlienger, ME
      Laser-deposited advanced materials

      JOURNAL OF ADVANCED MATERIALS
    6. Menand, A; Deconihout, B; Cadel, E; Blavette, D
      Atom-probe investigations of fine-scale features in intermetallics

      MICRON
    7. Perdrix, F; Trichet, MF; Bonnentien, JL; Cornet, M; Bigot, J
      Relationships between interstitial content, microstructure and mechanical properties in fully lamellar Ti-48Al alloys, with special reference to carbon

      INTERMETALLICS
    8. Perdrix, F; Trichet, MF; Bonnentien, JL; Cornet, M; Bigot, J
      Influence of nitrogen on the microstructure and mechanical properties of Ti-48Al alloy

      INTERMETALLICS
    9. Dimiduk, DM; Parthasarathy, TA; Hazzledine, PM
      Design-tool representations of strain compatibility and stress-strain relationships for lamellar gamma titanium aluminides

      INTERMETALLICS
    10. Kim, HY; Maruyama, K
      Deformation structure during creep deformation in soft orientation PST crystals

      INTERMETALLICS
    11. Cao, GH; Liu, ZG; Shen, GJ; Liu, JM
      Identification of a cubic precipitate in gamma-titanium aluminides

      JOURNAL OF ALLOYS AND COMPOUNDS
    12. Xia, QF; Wang, JN; Wang, Y; Yang, J
      Effect of heating rate on the grain refinement of a TiAl alloy by cyclic heat treatment

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    13. Seetharaman, V; Semiatin, SL
      Microstructures and tensile properties of Ti-45.5Al-2Nb-2Cr rolled sheets

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    14. Brossmann, U; Oehring, M; Lorenz, U; Appel, F; Clemens, H
      Evolution of the microstructure during hot working of gamma-based TiAl alloys

      ZEITSCHRIFT FUR METALLKUNDE
    15. Wegmann, G; Maruyama, K
      On the microstructural stability of TiAI/Ti3Al polysynthetically twinned crystals under creep conditions

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    16. Wang, P; Kumar, M; Vasudevan, VK
      Geometrical and structural characteristics of stacking fault-antiphase-boundary interactions in the massive gamma(m) phase in a quenched Ti-46.5 at.%Al alloy

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    17. Xia, QF; Wang, JN; Yang, J; Wang, JF; Wang, Y
      Shear deformation of a TiAl alloy during cyclic heat treatment

      SCRIPTA MATERIALIA
    18. Gao, KW; Nakamura, M
      Effect of hydrogen on tensile properties of Ti-49at.% Al alloy

      SCRIPTA MATERIALIA
    19. Yamaguchi, M; Inui, H; Ito, K
      High-temperature structural intermetallics

      ACTA MATERIALIA
    20. Morris, DG; Morris-Munoz, MA
      The importance of textures for determining the mechanical behaviour of intermetallics

      INTERMETALLICS
    21. Sauthoff, G
      Multiphase intermetallic alloys for structural applications

      INTERMETALLICS
    22. Li, W; Inkson, B; Horita, Z; Xia, K
      Microstructure observations in rare earth element Gd-modified Ti-44 at% Al

      INTERMETALLICS
    23. Lin, DL; Wang, Y; Liu, JL; Law, CC
      The effects of temperature, strain rate and minor boron on tensile properties of wrought Ti-47Al-2Mn-2Nb alloy

      INTERMETALLICS
    24. Zhang, J; Zhang, ZH; Su, X; Zou, DX; Zhong, ZY; Li, CH
      Microstructure preparation and hot-deformation of Ti-46.2Al-2.0V-1.0Cr-0.5Ni alloy

      INTERMETALLICS
    25. Wegmann, G; Suda, T; Maruyama, K
      Deformation characteristics of polysynthetically twinned (PST) crystals during creep at 1150 K

      INTERMETALLICS
    26. Ramanujan, RV
      Phase transformations in gamma based titanium aluminides

      INTERNATIONAL MATERIALS REVIEWS
    27. Salishchev, GA; Imayev, RM; Senkov, ON; Imayev, VM; Gabdullin, NK; Shagiev, MR; Kuznetsov, AV; Froes, FH
      Formation of a submicrocrystalline structure in TiAl and Ti3Al intermetallics by hot working

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    28. Cheng, T; Mitchell, A; Beddoes, J; Zhao, L; Saari, H; Durham, S
      Directionally solidified Ti-48Al-2Cr-2Nb made by power down or Bridgeman processing

      HIGH TEMPERATURE MATERIALS AND PROCESSES
    29. Cheng, T; Mitchell, A; Beddoes, J; Zhao, L; Durham, S
      Microstructure of directionally solidified Ti-52Al-2W-0.5Si intermetallic

      HIGH TEMPERATURE MATERIALS AND PROCESSES
    30. Yang, J; Wang, JN; Xia, QF; Wang, Y
      Effect of cooling rate on the grain refinement of TiAl-based alloys by rapid heat treatment

      MATERIALS LETTERS
    31. Yang, R; Hao, YL; Song, Y; Guo, ZX
      Site occupancy of alloying additions in titanium aluminides and its application to phase equilibrium evaluation

      ZEITSCHRIFT FUR METALLKUNDE
    32. Volkova, TV; Melikhov, VD; Roman'kov, SE
      Microstructure changes in the Ti-48 at. % Al-2 at. % Nb alloy upon variousheat treatments

      PHYSICS OF METALS AND METALLOGRAPHY
    33. Lay, S; Loubradou, M; Bonnet, R
      Atomic structures of linear singularities at close-packed {111}gamma parallel to(0001)alpha(2) interfaces in a 60Ti-40Al (at%) alloy

      PHYSICA STATUS SOLIDI A-APPLIED RESEARCH
    34. Zhang, WJ; Liu, ZC; Chen, GL; Kim, YW
      Dislocation structure in a Ti-45 at.% Al-10 at.% Nb alloy deformed at roomtemperature

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    35. Munroe, PR; Baker, I
      Solute partitioning in TiAl/Ti3Al alloys

      SCRIPTA MATERIALIA
    36. Hao, YL; Yang, R; Cui, YY; Li, D
      Estimation of site occupancy error due to statistical noise for the ratio ALCHEMI method

      SCRIPTA MATERIALIA
    37. Kishida, K; Inui, H; Yamaguchi, M
      Deformation of PST crystals of a TiAl/Ti3Al two-phase alloy at 1000 degrees C

      INTERMETALLICS
    38. Menand, A; Cadel, E; Pareige, C; Blavette, D
      Three-dimensional atomic scale microscopy with the atom probe

      ULTRAMICROSCOPY
    39. Flower, HM; Christodoulou, J
      Phase equilibria and transformations in titanium aluminides

      MATERIALS SCIENCE AND TECHNOLOGY
    40. Fu, CL
      First principles calculations of structural and defect properties of high-temperature intermetallics

      JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
    41. Kim, YW
      Advances in the fundamental understanding for designing engineering gamma TiAl alloys

      JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
    42. KISHIDA K; INUI H; YAMAGUCHI M
      DEFORMATION OF LAMELLAR STRUCTURE IN TIAL-TI3AL 2-PHASE ALLOYS

      Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
    43. SUN YQ
      AN EXTENDED DISLOCATION PILE-UP MODEL FOR THE YIELD STRENGTH OF LAMELLAR MICROSTRUCTURES

      Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
    44. TANIMURA M; INOUE Y; KOYAMA Y
      CHEMICAL-COMPOSITION OF THE FINE ALPHA(2)-44AT.PERCENT-AL ALLOY(GAMMALAMELLAR STRUCTURE IN A TI)

      Scripta materialia
    45. KAMPE SL; CHRISTODOULOU J; FENG CR; CHRISTODOULOU L; MICHEL DJ
      THE EFFECT OF MATRIX MICROSTRUCTURE AND REINFORCEMENT SHAPE ON THE CREEP DEFORMATION OF NEAR-GAMMA TITANIUM ALUMINIDE COMPOSITES

      Acta materialia
    46. KIMURA Y; POPE DP
      DUCTILITY AND TOUGHNESS IN INTERMETALLICS

      Intermetallics
    47. VITEK V
      ATOMIC-STRUCTURE OF DISLOCATIONS IN INTERMETALLICS WITH CLOSE-PACKED STRUCTURES - A COMPARATIVE-STUDY

      Intermetallics
    48. YOO MH
      TWINNING AND MECHANICAL-BEHAVIOR OF TITANIUM ALUMINIDES AND OTHER INTERMETALLICS

      Intermetallics
    49. DIMIDUK DM
      SYSTEMS-ENGINEERING OF GAMMA-TITANIUM ALUMINIDES - IMPACT OF FUNDAMENTALS ON DEVELOPMENT STRATEGY

      Intermetallics
    50. WANG JG; ZHANG LC; CHEN GL; YE HQ
      TEM OBSERVATIONS OF MECHANICAL TWINS IN A HOT-DEFORMED TI-45AL-10NB ALLOY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    51. MENAND A; ZAPOLSKYTATARENKO H; NERACPARTAIX A
      ATOM-PROBE INVESTIGATIONS OF TIAL ALLOYS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    52. WANG P; KUMAR M; HEMKER KJ; VASUDEVAN VK
      CHARACTERIZATION OF UNUSUAL STACKING-FAULTS AND DISLOCATIONS IN THE MASSIVE GAMMA(M)-PHASE IN A QUENCHED TI-46 AT-PERCENT AL

      Materials letters
    53. SHAO G; TSAKIROPOULOS P
      ULTRA-THIN TWIN PLATES AND GROWTH DOMAINS IN THE GAMMA-PHASE AS A PRODUCT OF THE B2 PHASE-DECOMPOSITION IN TI-40-AT-PERCENT-AL-10AT-PERCENT-V

      Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
    54. WANG JG; ZHANG LC; CHEN GL; YE HQ
      FORMATION OF STRESS-INDUCED 9R STRUCTURE IN A HOT-DEFORMED TI-45AL-10NB ALLOY

      Scripta materialia
    55. JHA SK; KHANNA AS
      OXIDATION BEHAVIOR OF TI-25AL-NB INTERMETALLICS

      Transactions of the Indian Institute of Metals
    56. LARSON DJ; LIU CT; MILLER MK
      BORON SOLUBILITY AND BORIDE COMPOSITIONS IN ALPHA(2)+GAMMA TITANIUM ALUMINIDES

      Intermetallics
    57. LARSON DJ; LIU CT; MILLER MK
      MICROSTRUCTURAL CHARACTERIZATION OF SEGREGATION AND PRECIPITATION IN ALPHA(2)+GAMMA TITANIUM ALUMINIDES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    58. CHATURVEDI MC; RICHARDS NL; XU Q
      ELECTRON-BEAM WELDING OF A TI-45AL-2NB-2MN-PERCENT TIB2 XD ALLOY(0.8 VOL)

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    59. YU TH; KOO CH
      MICROSTRUCTURAL EVOLUTION OF A HOT-ROLLED TI-40AL-10NB ALLOY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    60. ZGHAL S; COURET A
      A STUDY OF THE TRANSMISSION OF THE DEFORMATION AT THE ORDERED DOMAIN INTERFACES IN A TIAL LAMELLAR ALLOY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    61. APPEL F; LORENZ U; OEHRING M; SPARKA U; WAGNER R
      THERMALLY ACTIVATED DEFORMATION MECHANISMS IN MICRO-ALLOYED 2-PHASE TITANIUM ALUMINIDE ALLOYS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    62. PAIDAR V; INUI H; KISHIDA K; YAMAGUCHI M
      DISLOCATION DISSOCIATION IN TIAL ALLOYS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    63. RAMASESHAN R; NAIR NG; SESHADRI SK
      MAGNETIC-MOMENT STUDIES ON NICKEL COATED TITANIUM POWDERS

      Journal of materials science letters
    64. WANG Y; QIAN Z; LI XY; TANDON KN
      SLIDING WEAR PROPERTIES OF TIAL ALLOYS WITH WITHOUT TIN COATINGS/

      Surface & coatings technology
    65. HENAFF G; BITTAR B; MABRU C; PETIT J; BOWEN P
      FATIGUE-CRACK PROPAGATION RESISTANCE OF A TI-48AL-2MN-2NB ALLOY IN THE AS-CAST CONDITION

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    66. WANG JN; SCHWARTZ AJ; NIEH TG; CLEMENS D
      REDUCTION OF PRIMARY CREEP IN TIAL ALLOYS BY PRESTRAINING

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    67. CHU CL; WU SK
      ION NITRIDING OF TITANIUM ALUMINIDES WITH 25-53 AT.PERCENT AL .1. NITRIDING PARAMETERS AND MICROSTRUCTURE CHARACTERIZATION

      Surface & coatings technology
    68. ARITOMI N; TAKEYAMA M; YOSHIOKA T; TSUJIMOTO T; NAKAMURA M
      ELECTROLYTIC ISOLATION AND QUANTITATIVE-DETERMINATION OF ALPHA(2) ANDNONMETALLIC PHASES IN GAMMA-TIAL BASE ALLOYS

      Intermetallics
    69. ABE E; KUMAGAI T; NAKAMURA M
      STUDIES ON THE ALPHA-]GAMMA PHASE-TRANSFORMATION MECHANISM IN TI-48 AT-PERCENT AL-ALLOY BY HIGH-RESOLUTION ELECTRON-MICROSCOPY

      Philosophical magazine letters
    70. MORRIS MA; LI YG
      DEFORMATION MECHANISMS AND SLIP TRANSFER IN A TI-44AL-2MO ALLOY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    71. APPEL F; CHRISTOPH U; WAGNER R
      AN ELECTRON-MICROSCOPE STUDY OF DEFORMATION AND CRACK-PROPAGATION IN (ALPHA(2)+GAMMA) TITANIUM ALUMINIDES

      Philosophical magazine. A. Physics of condensed matter. Defects and mechanical properties
    72. KAMPE SL; SADLER P; CHRISTODOULOU L; LARSEN DE
      ROOM-TEMPERATURE STRENGTH AND DEFORMATION OF TIB2-REINFARCED NEAR-GAMMA TITANIUM ALUMINIDES

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    73. BOHNENKAMP U; WANG GX; JEWETT TJ; DAHMS M
      A QUANTITATIVE INVESTIGATION OF PHASE-FORMATION DURING ANNEALING OF COLD-EXTRUDED ELEMENTAL POWDER MIXTURES TI-48 AT-PERCENT AL AND TI-48 AT-PERCENT AL-2 AT-PERCENT CR

      Intermetallics
    74. MORRIS MA; LI YG; LEBOEUF M
      VARIATION OF THE PHASE DISTRIBUTION IN A TI-44AL-2MO ALLOY BY ANNEALING - INFLUENCE ON ITS STRENGTH AND DUCTILITY

      Scripta metallurgica et materialia
    75. LI YG; LORETTO MH
      MICROSTRUCTURE EVOLUTION OF TI-48AL-XNB GAMMA-INTERMETALLICS

      Acta metallurgica et materialia
    76. NIU Y; GESMUNDO F; VIANI F; WU W
      THE CORROSION OF NB-MODIFIED TI3AL IN A COMBUSTION GAS WITH AND WITHOUT NA2SO4 NACL DEPOSITS AT 600-800-DEGREES-C

      Oxidation of metals
    77. YUKI I; AMANO N; UOZUMI M; INUI H; YAMAGUCHI M
      EFFECT OF NITROGEN ADDITION ON THE MICROS TRUCTURE AND MECHANICAL-PROPERTIES OF CAST GAMMA-TITANIUM ALUMINIDE ALLOYS

      Nippon Kinzoku Gakkaishi
    78. DOGAN B; WANG GX; DAHMS M
      TENSILE PROPERTIES AND FRACTURE-BEHAVIOR OF TI52AL48 AND TI50AL48CR2 PREPARED FROM ELEMENTAL POWDERS

      Scripta metallurgica et materialia
    79. ZHANG XD; LORETTO MH
      DEFECT ANALYSIS IN MASSIVELY TRANSFORMED TI-50AT.PERCENT-AL-2AT.PERCENT-NB-2AT.PERCENT-MN ALLOY

      Philosophical magazine letters
    80. BECKER S; SCHUTZE M; RAHMEL A
      CYCLIC-OXIDATION BEHAVIOR OF TIAL AND OF TIAL ALLOYS

      Oxidation of metals


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 21/10/20 alle ore 19:27:02