Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Nuno, N; Amabili, M; Groppetti, R; Rossi, A
   Static coefficient of friction between Ti-6Al-4V and PMMA for cemented hipand knee implants
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   N. Nuno et al., "Static coefficient of friction between Ti-6Al-4V and PMMA for cemented hipand knee implants", J BIOMED MR, 59(1), 2002, pp. 191-200
2. Akser, EO; Choy, KL
   Finite element analysis of the stress distribution in a thermally and transversely loaded Ti-6Al-4V/SiC fibre composite
   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
   
   E.O. Akser e K.L. Choy, "Finite element analysis of the stress distribution in a thermally and transversely loaded Ti-6Al-4V/SiC fibre composite", COMPOS P A, 32(2), 2001, pp. 243-251
3. Orhan, N; Khan, TI; Eroglu, M
   Diffusion bonding of a microduplex stainless steel to Ti-6Al-4V
   SCRIPTA MATERIALIA
   
   N. Orhan et al., "Diffusion bonding of a microduplex stainless steel to Ti-6Al-4V", SCR MATER, 45(4), 2001, pp. 441-446
4. Elzey, DM; Wadley, HNG
   The limits of solid state foaming
   ACTA MATERIALIA
   
   D.M. Elzey e H.N.G. Wadley, "The limits of solid state foaming", ACT MATER, 49(5), 2001, pp. 849-859
5. Schmidt, H; Schminke, A; Schmiedgen, M; Baretzky, B
   Compound formation and abrasion resistance of ion-implanted Ti6Al4V
   ACTA MATERIALIA
   
   H. Schmidt et al., "Compound formation and abrasion resistance of ion-implanted Ti6Al4V", ACT MATER, 49(3), 2001, pp. 487-495
6. Schuh, C; Dunand, DC
   Internal stress plasticity due to chemical stresses
   ACTA MATERIALIA
   
   C. Schuh e D.C. Dunand, "Internal stress plasticity due to chemical stresses", ACT MATER, 49(17), 2001, pp. 3387-3400
7. Somekawa, H; Hosokawa, H; Watanabe, H; Higashi, K
   Experimental study on diffusion bonding in pure magnesium
   MATERIALS TRANSACTIONS
   
   H. Somekawa et al., "Experimental study on diffusion bonding in pure magnesium", MATER TRANS, 42(10), 2001, pp. 2075-2079
8. Semiatin, SL; Kobryn, PA; Roush, ED; Furrer, DU; Howson, TE; Boyer, RR; Chellman, DJ
   Plastic flow and microstructure evolution during thermomechanical processing of laser-deposited Ti-6/Al-4V preforms
   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
   
   S.L. Semiatin et al., "Plastic flow and microstructure evolution during thermomechanical processing of laser-deposited Ti-6/Al-4V preforms", MET MAT T A, 32(7), 2001, pp. 1801-1811
9. Vancheeswaran, R; Queheillalt, DT; Elzey, DM; Wadley, HNG
   Simulation of the creep expansion of porous sandwich structures
   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
   
   R. Vancheeswaran et al., "Simulation of the creep expansion of porous sandwich structures", MET MAT T A, 32(7), 2001, pp. 1813-1821
10. Wu, X; Cooper, C; Bowen, P
    In-situ observations of titanium metal-matrix composites under transverse tensile loading
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    X. Wu et al., "In-situ observations of titanium metal-matrix composites under transverse tensile loading", MET MAT T A, 32(7), 2001, pp. 1851-1860
11. Peters, JO; Lutjering, G
    Comparison of the fatigue and fracture of alpha Plus beta and beta titanium alloys
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    J.O. Peters e G. Lutjering, "Comparison of the fatigue and fracture of alpha Plus beta and beta titanium alloys", MET MAT T A, 32(11), 2001, pp. 2805-2818
12. Kobryn, PA; Shivpuri, R; Semiatin, SL
    Mold wear during permanent-mold casting of Ti-6Al-4V
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    P.A. Kobryn et al., "Mold wear during permanent-mold casting of Ti-6Al-4V", J MAT ENG P, 10(3), 2001, pp. 290-298
13. Tamirisakandala, S; Medeiros, SC; Frazier, WG; Prasad, YVRK
    Strain-induced porosity during cogging of extra-low interstitial grade Ti-6AI-4V
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    S. Tamirisakandala et al., "Strain-induced porosity during cogging of extra-low interstitial grade Ti-6AI-4V", J MAT ENG P, 10(2), 2001, pp. 125-130
14. Wiskott, HWA; Doumas, T; Scherrer, SS; Belser, UC; Susz, C
    Mechanical and structural characteristics of commercially pure grade 2 Ti welds and solder joints
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
    
    H.W.A. Wiskott et al., "Mechanical and structural characteristics of commercially pure grade 2 Ti welds and solder joints", J MAT S-M M, 12(8), 2001, pp. 719-725
15. Yen, SK; Hsu, HC
    Nano-crystallization and surface analysis of electrolytic ZrO2 coatings onCo-Cr alloy
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
    
    S.K. Yen e H.C. Hsu, "Nano-crystallization and surface analysis of electrolytic ZrO2 coatings onCo-Cr alloy", J MAT S-M M, 12(6), 2001, pp. 497-501
16. Bosetti, M; Masse, A; Tobin, E; Cannas, M
    In vivo evaluation of bone tissue behavior on ion implanted surfaces
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
    
    M. Bosetti et al., "In vivo evaluation of bone tissue behavior on ion implanted surfaces", J MAT S-M M, 12(5), 2001, pp. 431-435
17. Huang, LY; Xu, KW; Lu, J; Guelorget, B; Chen, H
    Nano-scratch and fretting wear study of DLC coatings for biomedical application
    DIAMOND AND RELATED MATERIALS
    
    L.Y. Huang et al., "Nano-scratch and fretting wear study of DLC coatings for biomedical application", DIAM RELAT, 10(8), 2001, pp. 1448-1456
18. De Barros, MI; Vandenbulcke, L; Chinsky, L; Rats, D; von Stebut, J
    Smooth fine-grained diamond coatings on titanium alloy for mechanical applications
    DIAMOND AND RELATED MATERIALS
    
    M.I. De Barros et al., "Smooth fine-grained diamond coatings on titanium alloy for mechanical applications", DIAM RELAT, 10(3-7), 2001, pp. 337-341
19. Gil, FJ; Ginebra, MP; Manero, JM; Planell, JA
    Formation of alpha-Widmanstatten structure: effects of grain size and cooling rate on the Widmanstatten morphologies and on the mechanical propertiesin Ti6Al4V alloy
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    F.J. Gil et al., "Formation of alpha-Widmanstatten structure: effects of grain size and cooling rate on the Widmanstatten morphologies and on the mechanical propertiesin Ti6Al4V alloy", J ALLOY COM, 329(1-2), 2001, pp. 142-152
20. Patankar, SN; Kwang, YT; Jen, TM
    Alpha casing and superplastic behavior of Ti-6Al-4V
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    S.N. Patankar et al., "Alpha casing and superplastic behavior of Ti-6Al-4V", J MATER PR, 112(1), 2001, pp. 24-28
21. Prasad, YVRK; Seshacharyulu, T; Medeiros, SC; Frazier, WG
    Influence of oxygen content on the forging response of equiaxed (alpha+beta) preform of Ti-6Al-4V: commercial vs. ELI grade
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    Y.V.R.K. Prasad et al., "Influence of oxygen content on the forging response of equiaxed (alpha+beta) preform of Ti-6Al-4V: commercial vs. ELI grade", J MATER PR, 108(3), 2001, pp. 320-327
22. Shademan, S; Soboyejo, ABO; Knott, JF; Soboyejo, WO
    A physically-based model for the prediction of long fatigue crack growth in Ti-6Al-4V
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    S. Shademan et al., "A physically-based model for the prediction of long fatigue crack growth in Ti-6Al-4V", MAT SCI E A, 315(1-2), 2001, pp. 1-10
23. Ritchie, RO; Peters, JO
    Small fatigue cracks: Mechanics, mechanisms and engineering applications
    MATERIALS TRANSACTIONS JIM
    
    R.O. Ritchie e J.O. Peters, "Small fatigue cracks: Mechanics, mechanisms and engineering applications", MATER T JIM, 42(1), 2001, pp. 58-67
24. Wiskott, HWA; Doumas, T; Scherrer, SS; Susz, C; Belser, UC
    Microstructures of brazings and welds using grade 2 commercially pure titanium
    INTERNATIONAL JOURNAL OF PROSTHODONTICS
    
    H.W.A. Wiskott et al., "Microstructures of brazings and welds using grade 2 commercially pure titanium", INT J PROST, 14(1), 2001, pp. 40-47
25. Davis, NG; Teisen, J; Schuh, C; Dunand, DC
    Solid-state foaming of titanium by superplastic expansion of argon-filled pores
    JOURNAL OF MATERIALS RESEARCH
    
    N.G. Davis et al., "Solid-state foaming of titanium by superplastic expansion of argon-filled pores", J MATER RES, 16(5), 2001, pp. 1508-1519
26. Schuh, C; Dunand, DC
    Tensile fracture during transformation superplasticity of Ti-6Al-4V
    JOURNAL OF MATERIALS RESEARCH
    
    C. Schuh e D.C. Dunand, "Tensile fracture during transformation superplasticity of Ti-6Al-4V", J MATER RES, 16(3), 2001, pp. 865-875
27. Kendig, KL; Gibala, R; Miracle, DB
    Microstructural and mechanical characterization of carbon coatings on SiC fibers
    JOURNAL OF MATERIALS RESEARCH
    
    K.L. Kendig et al., "Microstructural and mechanical characterization of carbon coatings on SiC fibers", J MATER RES, 16(12), 2001, pp. 3366-3377
28. Yu, R; Zhang, S; He, LL; Wu, WT; Ye, HQ
    Metal/ceramic interface in an in situ synthesized Ti/TiCP composite coating by laser processing
    JOURNAL OF MATERIALS RESEARCH
    
    R. Yu et al., "Metal/ceramic interface in an in situ synthesized Ti/TiCP composite coating by laser processing", J MATER RES, 16(1), 2001, pp. 9-12
29. Lim, YJ; Oshida, Y; Andres, CJ; Barco, MT
    Surface characterizations of variously treated titanium materials
    INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
    
    Y.J. Lim et al., "Surface characterizations of variously treated titanium materials", INT J O M I, 16(3), 2001, pp. 333-342
30. Spies, HJ; Reinhold, B; Wilsdorf, K
    Gas nitriding - Process control and nitriding non-ferrous alloys
    SURFACE ENGINEERING
    
    H.J. Spies et al., "Gas nitriding - Process control and nitriding non-ferrous alloys", SURF ENG, 17(1), 2001, pp. 41-54
31. Vandenbulcke, L; De Barros, MI
    Deposition, structure, mechanical properties and tribological behavior of polycrystalline to smooth fine-grained diamond coatings
    SURFACE & COATINGS TECHNOLOGY
    
    L. Vandenbulcke e M.I. De Barros, "Deposition, structure, mechanical properties and tribological behavior of polycrystalline to smooth fine-grained diamond coatings", SURF COAT, 146, 2001, pp. 417-424
32. Borgioli, F; Galvanetto, E; Galliano, FP; Bacci, T
    Air treatment of pure titanium by furnace and glow-discharge processes
    SURFACE & COATINGS TECHNOLOGY
    
    F. Borgioli et al., "Air treatment of pure titanium by furnace and glow-discharge processes", SURF COAT, 141(1), 2001, pp. 103-107
33. Kwietniewski, C; Dong, H; Strohaecker, T; Li, XY; Bell, T
    Duplex surface treatment of high strength Timetal 550 alloy towards high load-bearing capacity
    SURFACE & COATINGS TECHNOLOGY
    
    C. Kwietniewski et al., "Duplex surface treatment of high strength Timetal 550 alloy towards high load-bearing capacity", SURF COAT, 139(2-3), 2001, pp. 284-292
34. Blodgett, MP; Eylon, D
    The influence of texture and phase distortion on ultrasonic attenuation inTi-6Al-4V
    JOURNAL OF NONDESTRUCTIVE EVALUATION
    
    M.P. Blodgett e D. Eylon, "The influence of texture and phase distortion on ultrasonic attenuation inTi-6Al-4V", J NOND EVAL, 20(1), 2001, pp. 1-16
35. Barron, THK; Padmaja, A
    Thermoelastic fluctuations in solids
    INTERNATIONAL JOURNAL OF THERMOPHYSICS
    
    T.H.K. Barron e A. Padmaja, "Thermoelastic fluctuations in solids", INT J THERM, 22(4), 2001, pp. 1201-1213
36. Berberich, F; Matz, W; Kreissig, U; Richter, E; Schell, N; Moller, W
    Structural characterisation of hardening of Ti-Al-V alloys after nitridation by plasma immersion ion implantation
    APPLIED SURFACE SCIENCE
    
    F. Berberich et al., "Structural characterisation of hardening of Ti-Al-V alloys after nitridation by plasma immersion ion implantation", APPL SURF S, 179(1-4), 2001, pp. 13-19
37. Javorsky, CS; Strohaecker, TR; da Costa, JATB; Vasconcellos, MAZ
    Ion beam analysis of plasma nitrided Ti6Al4V-ELI
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS
    
    C.S. Javorsky et al., "Ion beam analysis of plasma nitrided Ti6Al4V-ELI", NUCL INST B, 175, 2001, pp. 726-731
38. Nemat-Nasser, S; Guo, WG; Nesterenko, VF; Indrakanti, SS; Gu, YB
    Dynamic response of conventional and hot isostatically pressed Ti-6Al-4V alloys: experiments and modeling
    MECHANICS OF MATERIALS
    
    S. Nemat-Nasser et al., "Dynamic response of conventional and hot isostatically pressed Ti-6Al-4V alloys: experiments and modeling", MECH MATER, 33(8), 2001, pp. 425-439
39. Boyce, BL; Chen, X; Hutchinson, JW; Ritchie, RO
    The residual stress state due to a spherical hard-body impact
    MECHANICS OF MATERIALS
    
    B.L. Boyce et al., "The residual stress state due to a spherical hard-body impact", MECH MATER, 33(8), 2001, pp. 441-454
40. Feng, CF; Khor, KA; Gu, YW; Cheang, P
    Analysis of phase changes in plasma-sprayed Ti-6Al-4V/hydroxyapatite composite coatings by DSC
    MATERIALS LETTERS
    
    C.F. Feng et al., "Analysis of phase changes in plasma-sprayed Ti-6Al-4V/hydroxyapatite composite coatings by DSC", MATER LETT, 51(1), 2001, pp. 88-93
41. Seshacharyulu, T; Medeiros, SC; Frazier, WG; Prasad, YVRK
    Unstable flow during supratransus working of Ti-6Al-4V
    MATERIALS LETTERS
    
    T. Seshacharyulu et al., "Unstable flow during supratransus working of Ti-6Al-4V", MATER LETT, 47(3), 2001, pp. 133-139
42. Yen, SK; Guo, MJ; Zan, HZ
    Characterization of electrolytic ZrO2 coating on Co-Cr-Mo implant alloys of hip prosthesis
    BIOMATERIALS
    
    S.K. Yen et al., "Characterization of electrolytic ZrO2 coating on Co-Cr-Mo implant alloys of hip prosthesis", BIOMATERIAL, 22(2), 2001, pp. 125-133
43. Krupa, D; Baszkiewicz, J; Kozubowski, JA; Barcz, A; Sobczak, JW; Bilinski, A; Lewandowska-Szumiel, M; Rajchel, B
    Effect of calcium-ion implantation on the corrosion resistance and biocompatibility of titanium
    BIOMATERIALS
    
    D. Krupa et al., "Effect of calcium-ion implantation on the corrosion resistance and biocompatibility of titanium", BIOMATERIAL, 22(15), 2001, pp. 2139-2151
44. Starosvetsky, D; Gotman, I
    Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy
    BIOMATERIALS
    
    D. Starosvetsky e I. Gotman, "Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy", BIOMATERIAL, 22(13), 2001, pp. 1853-1859
45. Zhang, CG; Leng, Y; Chen, JY
    Elastic and plastic behavior of plasma-sprayed hydroxyapatite coatings on a Ti-6Al-4V substrate
    BIOMATERIALS
    
    C.G. Zhang et al., "Elastic and plastic behavior of plasma-sprayed hydroxyapatite coatings on a Ti-6Al-4V substrate", BIOMATERIAL, 22(11), 2001, pp. 1357-1363
46. Shen, W; Soboyejo, ABO; Soboyejo, WO
    Probabilistic modeling of fatigue crack growth in Ti-6Al-4V
    INTERNATIONAL JOURNAL OF FATIGUE
    
    W. Shen et al., "Probabilistic modeling of fatigue crack growth in Ti-6Al-4V", INT J FATIG, 23(10), 2001, pp. 917-925
47. Prasad, YVRK; Seshacharyulu, T; Medeiros, SC; Frazier, WG
    A study of beta processing of Ti-6Al-4V: Is it trivial?
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
    
    Y.V.R.K. Prasad et al., "A study of beta processing of Ti-6Al-4V: Is it trivial?", J ENG MATER, 123(3), 2001, pp. 355-360
48. Murty, SVSN; Rao, BN; Kashyap, BP
    On the hot workability of ELI grade titanium alloy Ti-6Al-4V
    ZEITSCHRIFT FUR METALLKUNDE
    
    S.V.S.N. Murty et al., "On the hot workability of ELI grade titanium alloy Ti-6Al-4V", Z METALLKUN, 92(5), 2001, pp. 473-476
49. Neville, A; McDougall, BAB
    Erosion- and cavitation-corrosion of titanium and its alloys
    WEAR
    
    A. Neville e B.A.B. McDougall, "Erosion- and cavitation-corrosion of titanium and its alloys", WEAR, 250, 2001, pp. 726-735
50. He, DX; Zhang, TC; Wu, YS
    Fretting and galvanic corrosion behaviors and mechanisms of Co-Cr-Mo and Ti-6Al-4V alloys
    WEAR
    
    D.X. He et al., "Fretting and galvanic corrosion behaviors and mechanisms of Co-Cr-Mo and Ti-6Al-4V alloys", WEAR, 249(10-11), 2001, pp. 883-891
51. Sedarat, C; Harmand, MF; Naji, A; Nowzari, H
    In vitro kinetic evaluation of titanium alloy biodegradation
    JOURNAL OF PERIODONTAL RESEARCH
    
    C. Sedarat et al., "In vitro kinetic evaluation of titanium alloy biodegradation", J PERIOD RE, 36(5), 2001, pp. 269-274
52. Zhang, C; Leng, Y; Chen, JY
    In vitro mechanical integrity of hydroxyapatite coatings on Ti-6Al-4V implants under shear loading
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    C. Zhang et al., "In vitro mechanical integrity of hydroxyapatite coatings on Ti-6Al-4V implants under shear loading", J BIOMED MR, 56(3), 2001, pp. 342-350
53. Han, Y; Xu, KW; Lu, J
    Dissolution response of hydroxyapatite coatings to residual stresses
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    Y. Han et al., "Dissolution response of hydroxyapatite coatings to residual stresses", J BIOMED MR, 55(4), 2001, pp. 596-602
54. Yang, YZ; Tian, JM; Tian, JT; Chen, ZQ
    Surface modification of titanium through amino group implantation
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    Y.Z. Yang et al., "Surface modification of titanium through amino group implantation", J BIOMED MR, 55(3), 2001, pp. 442-444
55. Han, Y; Fu, T; Lu, J; Xu, KW
    Characterization and stability of hydroxyapatite coatings prepared by an electrodeposition and alkaline-treatment process
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    Y. Han et al., "Characterization and stability of hydroxyapatite coatings prepared by an electrodeposition and alkaline-treatment process", J BIOMED MR, 54(1), 2001, pp. 96-101
56. Robin, A; Rosa, JL; Sandim, HRZ
    Corrosion behaviour of Ti-4Al-4V alloy in nitric, phosphoric and sulfuric acid solutions at room temperature
    JOURNAL OF APPLIED ELECTROCHEMISTRY
    
    A. Robin et al., "Corrosion behaviour of Ti-4Al-4V alloy in nitric, phosphoric and sulfuric acid solutions at room temperature", J APPL ELEC, 31(4), 2001, pp. 455-460
57. Boyce, BL; Ritchie, RO
    Effect of load ratio and maximum stress intensity on the fatigue thresholdin Ti-6Al-4V
    ENGINEERING FRACTURE MECHANICS
    
    B.L. Boyce e R.O. Ritchie, "Effect of load ratio and maximum stress intensity on the fatigue thresholdin Ti-6Al-4V", ENG FRACT M, 68(2), 2001, pp. 129-147
58. Vandenbulcke, L; De Barros, MI
    Deposition of smooth diamond coatings on titanium alloy.
    COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE C-CHIMIE
    
    L. Vandenbulcke e M.I. De Barros, "Deposition of smooth diamond coatings on titanium alloy.", CR AC S IIC, 3(1), 2000, pp. 21-25
59. Koike, J; Shimoyama, Y; Ohnuma, I; Okamura, T; Kainuma, R; Ishida, K; Maruyama, K
    Stress-induced phase transformation during superplastic deformation in two-phase Ti-Al-Fe alloy
    ACTA MATERIALIA
    
    J. Koike et al., "Stress-induced phase transformation during superplastic deformation in two-phase Ti-Al-Fe alloy", ACT MATER, 48(9), 2000, pp. 2059-2069
60. Schuler, S; Derby, B; Wood, M; Ward-Close, C
    Matrix flow and densification during the consolidation of matrix coated fibres
    ACTA MATERIALIA
    
    S. Schuler et al., "Matrix flow and densification during the consolidation of matrix coated fibres", ACT MATER, 48(6), 2000, pp. 1247-1258
61. Kim, S; Lee, S
    Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    S. Kim e S. Lee, "Effects of martensite morphology and volume fraction on quasi-static and dynamic deformation behavior of dual-phase steels", MET MAT T A, 31(7), 2000, pp. 1753-1760
62. Shimojo, M; Higo, Y; Oya-Seimiya, Y
    Effects of inert gases on fatigue crack growth and their transportation into subsurface regions in titanium
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    M. Shimojo et al., "Effects of inert gases on fatigue crack growth and their transportation into subsurface regions in titanium", MET MAT T A, 31(5), 2000, pp. 1435-1441
63. Vancheeswaran, R; Kunze, JM; Elzey, DM; Wadley, HNG
    Mechanisms, models, and simulations of metal-coated fiber consolidation
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    R. Vancheeswaran et al., "Mechanisms, models, and simulations of metal-coated fiber consolidation", MET MAT T A, 31(4), 2000, pp. 1271-1282
64. Jha, SK; Ravichandran, KS
    Effect of mean stress (stress ratio) and aging on fatigue-crack growth in a metastable beta titanium alloy, Ti-10V-2Fe-3Al
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    S.K. Jha e K.S. Ravichandran, "Effect of mean stress (stress ratio) and aging on fatigue-crack growth in a metastable beta titanium alloy, Ti-10V-2Fe-3Al", MET MAT T A, 31(3), 2000, pp. 703-714
65. Queheillalt, DT; Choi, BW; Schwartz, DS; Wadley, HNG
    Creep expansion of porous Ti-6Al-4V sandwich structures
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    D.T. Queheillalt et al., "Creep expansion of porous Ti-6Al-4V sandwich structures", MET MAT T A, 31(1), 2000, pp. 261-273
66. Liknes, HO; Stephens, RR
    Effect of geometry and load history on fatigue-crack growth in Ti-62222
    FATIGUE CRACK GROWTH THRESHOLDS, ENDURANCE LIMITS, AND DESIGN
    
    H.O. Liknes e R.R. Stephens, "Effect of geometry and load history on fatigue-crack growth in Ti-62222", AM SOC TEST, 1372, 2000, pp. 175-191
67. Fu, YQ; Loh, NL; Yan, BB; Wei, J
    Indentation and scratch tests on sputtered amorphous CNX films deposited on plasma-nitrided Ti-6Al-4V
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    Y.Q. Fu et al., "Indentation and scratch tests on sputtered amorphous CNX films deposited on plasma-nitrided Ti-6Al-4V", J MAT ENG P, 9(5), 2000, pp. 499-505
68. Fu, YQ; Du, HJ; Gu, YW
    Improvement of erosion resistance of titanium with different surface treatments
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    Y.Q. Fu et al., "Improvement of erosion resistance of titanium with different surface treatments", J MAT ENG P, 9(5), 2000, pp. 571-579
69. Cotton, JD
    Anelastic deformation measurements in structural engineering alloys
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    J.D. Cotton, "Anelastic deformation measurements in structural engineering alloys", J MAT ENG P, 9(4), 2000, pp. 463-466
70. Dubey, JS; Chakravartty, JK; Wadekar, SL; Gurumurthy, KR
    Influence of alpha-unit size and morphology on the near-threshold fatigue crack growth behaviour of Zr-2.5Nb alloy
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
    
    J.S. Dubey et al., "Influence of alpha-unit size and morphology on the near-threshold fatigue crack growth behaviour of Zr-2.5Nb alloy", T I INST ME, 53(3), 2000, pp. 319-325
71. Yan, Z; Nagy, PB
    Thermo-optical modulation for improved ultrasonic fatigue crack detection in Ti-6Al-4V
    NDT & E INTERNATIONAL
    
    Z. Yan e P.B. Nagy, "Thermo-optical modulation for improved ultrasonic fatigue crack detection in Ti-6Al-4V", NDT E INT, 33(4), 2000, pp. 213-223
72. Xun, YW; Tan, MJ
    Applications of superplastic forming and diffusion bonding to hollow engine blades
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    Y.W. Xun e M.J. Tan, "Applications of superplastic forming and diffusion bonding to hollow engine blades", J MATER PR, 99(1-3), 2000, pp. 80-85
73. Yilbas, BS; Hashmi, MSJ
    Laser treatment of Ti-6A1-4V alloy prior to plasma nitriding
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    B.S. Yilbas e M.S.J. Hashmi, "Laser treatment of Ti-6A1-4V alloy prior to plasma nitriding", J MATER PR, 103(2), 2000, pp. 304-309
74. Lee, WS; Sue, WC; Lin, CF; Wu, CJ
    The strain rate and temperature dependence of the dynamic impact properties of 7075 aluminum alloy
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    W.S. Lee et al., "The strain rate and temperature dependence of the dynamic impact properties of 7075 aluminum alloy", J MATER PR, 100(1-3), 2000, pp. 116-122
75. Lee, WS; Lin, CF; Chang, ST
    Plastic flow of tungsten-based composite under hot compression
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    W.S. Lee et al., "Plastic flow of tungsten-based composite under hot compression", J MATER PR, 100(1-3), 2000, pp. 123-130
76. Li, HT; Zhang, YM; Yang, DZ
    Micro-damage of Ti-6Al-4V alloy under hypervelocity projectile impact
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    H.T. Li et al., "Micro-damage of Ti-6Al-4V alloy under hypervelocity projectile impact", MAT SCI E A, 292(1), 2000, pp. 130-132
77. Kwok, CT; Cheng, FT; Man, HC
    Laser surface modification of UNS S31603 stainless steel. Part I: microstructures and corrosion characteristics
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    C.T. Kwok et al., "Laser surface modification of UNS S31603 stainless steel. Part I: microstructures and corrosion characteristics", MAT SCI E A, 290(1-2), 2000, pp. 55-73
78. Perez, P; Haanappel, VAC; Stroosnijder, MF
    The effect of niobium on the oxidation behaviour of titanium in N-2/20% O-2 atmospheres
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    P. Perez et al., "The effect of niobium on the oxidation behaviour of titanium in N-2/20% O-2 atmospheres", MAT SCI E A, 284(1-2), 2000, pp. 126-137
79. Seshacharyulu, T; Medeiros, SC; Frazier, WG; Prasad, YVRK
    Hot working of commercial Ti-6Al-4V with an equiaxed alpha-beta microstructure: materials modeling considerations
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    T. Seshacharyulu et al., "Hot working of commercial Ti-6Al-4V with an equiaxed alpha-beta microstructure: materials modeling considerations", MAT SCI E A, 284(1-2), 2000, pp. 184-194
80. Godfrey, TMT; Wisbey, A; Goodwin, PS; Bagnall, K; Ward-Close, CM
    Microstructure and tensile properties of mechanically alloyed Ti-6Al-4V with boron additions
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    T.M.T. Godfrey et al., "Microstructure and tensile properties of mechanically alloyed Ti-6Al-4V with boron additions", MAT SCI E A, 282(1-2), 2000, pp. 240-250
81. Muster, D; Hage-Ali, M; Rie, KT; Stucky, T; Cornet, A; Mainard, D
    Plasma deposition, plasma coating, and ion implantation to improve metallic: Implants and prostheses
    MRS BULLETIN
    
    D. Muster et al., "Plasma deposition, plasma coating, and ion implantation to improve metallic: Implants and prostheses", MRS BULL, 25(1), 2000, pp. 25-32
82. Cheong, BH; Lin, J; Ball, AA
    Modelling of the hardening characteristics for superplastic materials
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
    
    B.H. Cheong et al., "Modelling of the hardening characteristics for superplastic materials", J STRAIN A, 35(3), 2000, pp. 149-157
83. Sovak, G; Weiss, A; Gotman, I
    Osseointegration of Ti6A14V alloy implants coated with titanium nitride bya new method
    JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
    
    G. Sovak et al., "Osseointegration of Ti6A14V alloy implants coated with titanium nitride bya new method", J BONE-BR V, 82B(2), 2000, pp. 290-296
84. Shenhar, A; Gotman, I; Radin, S; Ducheyne, P
    Microstructure and fretting behavior of hard TiN-based coatings on surgical titanium alloys
    CERAMICS INTERNATIONAL
    
    A. Shenhar et al., "Microstructure and fretting behavior of hard TiN-based coatings on surgical titanium alloys", CERAM INT, 26(7), 2000, pp. 709-713
85. Yilbas, BS; Shuja, SZ
    Investigation of nitrogen diffusion during laser heating of titanium
    SURFACE ENGINEERING
    
    B.S. Yilbas e S.Z. Shuja, "Investigation of nitrogen diffusion during laser heating of titanium", SURF ENG, 16(6), 2000, pp. 519-523
86. Bache, MR; Evans, WJ; Shakesheff, AJ; Shields, J; Uygur, I
    Influence of aqueous salt environments on fatigue response of SiCp reinforced aluminium alloys
    MATERIALS SCIENCE AND TECHNOLOGY
    
    M.R. Bache et al., "Influence of aqueous salt environments on fatigue response of SiCp reinforced aluminium alloys", MATER SCI T, 16(7-8), 2000, pp. 825-829
87. McFadden, SX; Sergueeva, AV; Mishra, RS; Mukherjee, AK
    High strain rate superplasticity in microcrystalline and nanocrystalline materials
    MATERIALS SCIENCE AND TECHNOLOGY
    
    S.X. McFadden et al., "High strain rate superplasticity in microcrystalline and nanocrystalline materials", MATER SCI T, 16(11-12), 2000, pp. 1340-1344
88. Tandon, GP; Kim, RY; Bechel, VT
    Evaluation of interfacial normal strength in a SCS-0/epoxy composite with cruciform specimens
    COMPOSITES SCIENCE AND TECHNOLOGY
    
    G.P. Tandon et al., "Evaluation of interfacial normal strength in a SCS-0/epoxy composite with cruciform specimens", COMP SCI T, 60(12-13), 2000, pp. 2281-2295
89. Salam, A; Hammond, C
    Activation energy for superplastic flow in Ti-3Al-4V alloy
    JOURNAL OF MATERIALS SCIENCE LETTERS
    
    A. Salam e C. Hammond, "Activation energy for superplastic flow in Ti-3Al-4V alloy", J MAT SCI L, 19(23), 2000, pp. 2155-2156
90. Salam, A; Hammond, C
    Superplasticity in Ti-3Al-2.5V
    JOURNAL OF MATERIALS SCIENCE LETTERS
    
    A. Salam e C. Hammond, "Superplasticity in Ti-3Al-2.5V", J MAT SCI L, 19(19), 2000, pp. 1731-1733
91. Nie, X; Leyland, A; Matthews, A
    Low temperature deposition of Cr(N)/TiO2 coatings using a duplex process of unbalanced magnetron sputtering and micro-arc oxidation
    SURFACE & COATINGS TECHNOLOGY
    
    X. Nie et al., "Low temperature deposition of Cr(N)/TiO2 coatings using a duplex process of unbalanced magnetron sputtering and micro-arc oxidation", SURF COAT, 133, 2000, pp. 331-337
92. Fleszar, A; Wierzchon, T; Kim, SK; Sobiecki, JR
    Properties of surface layers produced on the Ti-GAl-3Mo-2Cr titanium alloyunder glow discharge conditions
    SURFACE & COATINGS TECHNOLOGY
    
    A. Fleszar et al., "Properties of surface layers produced on the Ti-GAl-3Mo-2Cr titanium alloyunder glow discharge conditions", SURF COAT, 131(1-3), 2000, pp. 62-65
93. Yilbas, BS; Shuja, SZ
    Laser treatment and PVD TiN coating of Ti-6Al-4V alloy
    SURFACE & COATINGS TECHNOLOGY
    
    B.S. Yilbas e S.Z. Shuja, "Laser treatment and PVD TiN coating of Ti-6Al-4V alloy", SURF COAT, 130(2-3), 2000, pp. 152-157
94. Fu, Y; Yan, B; Loh, NL
    Effects of pre-treatments and interlayers on the nucleation and growth of diamond coatings on titanium substrates
    SURFACE & COATINGS TECHNOLOGY
    
    Y. Fu et al., "Effects of pre-treatments and interlayers on the nucleation and growth of diamond coatings on titanium substrates", SURF COAT, 130(2-3), 2000, pp. 173-185
95. Berberich, F; Matz, W; Richter, E; Schell, N; Kreissig, U; Moller, W
    Structural mechanisms of the mechanical degradation of Ti-Al-V alloys: in situ study during annealing
    SURFACE & COATINGS TECHNOLOGY
    
    F. Berberich et al., "Structural mechanisms of the mechanical degradation of Ti-Al-V alloys: in situ study during annealing", SURF COAT, 128, 2000, pp. 450-454
96. Oh, JC; Choo, DK; Lee, SH
    Microstructural modification and hardness improvement of titanium-base surface-alloyed materials fabricated by high-energy electron beam irradiation
    SURFACE & COATINGS TECHNOLOGY
    
    J.C. Oh et al., "Microstructural modification and hardness improvement of titanium-base surface-alloyed materials fabricated by high-energy electron beam irradiation", SURF COAT, 127(1), 2000, pp. 76-85
97. Lin, JHC; Lin, HJ; Ding, SJ; Ju, CP
    Characterization of immersed hydroxyapatite-bioactive glass coatings in Hank's solution
    MATERIALS CHEMISTRY AND PHYSICS
    
    J.H.C. Lin et al., "Characterization of immersed hydroxyapatite-bioactive glass coatings in Hank's solution", MATER CH PH, 64(3), 2000, pp. 229-240
98. Shuja, SZ; Yilbas, BS
    3-dimensional conjugate laser heating of a moving slab
    APPLIED SURFACE SCIENCE
    
    S.Z. Shuja e B.S. Yilbas, "3-dimensional conjugate laser heating of a moving slab", APPL SURF S, 167(3-4), 2000, pp. 134-148
99. Geng, J; Gantner, G; Oelhafen, P; Datta, PK
    Initial oxidation of Ti-Al intermetallics: an in situ MXPS study
    APPLIED SURFACE SCIENCE
    
    J. Geng et al., "Initial oxidation of Ti-Al intermetallics: an in situ MXPS study", APPL SURF S, 158(1-2), 2000, pp. 64-74
100. Inoue, T; Ikezaki, K; Sato, Y
     Ultrasonic surgical system (SONOPET (R)) for microsurgical removal of brain tumors
     NEUROLOGICAL RESEARCH
     
     T. Inoue et al., "Ultrasonic surgical system (SONOPET (R)) for microsurgical removal of brain tumors", NEUROL RES, 22(5), 2000, pp. 490-494