Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'THERMOPLASTICS' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 416 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Rajeev, RS; De, SK; Bhowmick, AK
      Rheological properties of short melamine fibre filled EPDM rubber

      PLASTICS RUBBER AND COMPOSITES
    2. Sadiku, ER; Sanderson, RD
      Variables that determine the fiber-matrix bond strength in ethylene-type ionomer composites

      MACROMOLECULAR MATERIALS AND ENGINEERING
    3. Wang, J; Yu, J
      Kinetic analysis on formation of poly(3-hydroxybutyrate) from acetic acid by Ralstonia eutropha under chemically defined conditions

      JOURNAL OF INDUSTRIAL MICROBIOLOGY & BIOTECHNOLOGY
    4. Staggs, JEJ; Nelson, MI
      A critical mass flux model for the flammability of thermoplastics

      COMBUSTION THEORY AND MODELLING
    5. Nelson, MI
      A dynamical systems model of the limiting oxygen index test: II. Retardancy due to char formation and addition of inert fillers

      COMBUSTION THEORY AND MODELLING
    6. Luo, Y; Li, H; Li, SJ
      Studies on phase separation of polyesterimide-modified epoxy resin. II. Effect of curing temperature on phase separation and adhesive property

      JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY
    7. Antretter, T; Fischer, FD
      The susceptibility to failure of the constituents of particulate two-phasecomposites

      INTERNATIONAL JOURNAL OF DAMAGE MECHANICS
    8. Ruiz, MM; Cavaille, JY; Dufresne, A; Graillat, C; Gerard, JF
      New waterborne epoxy coatings based on cellulose nanofillers

      MACROMOLECULAR SYMPOSIA
    9. Iijima, T; Hamakawa, S; Tomoi, M
      Preparation of novel soluble poly(ester imide)s containing a trimellitimide moiety and their use as modifiers for aromatic diamine-cured epoxy resin

      POLYMER INTERNATIONAL
    10. Jandura, P; Kokta, BV; Riedl, B
      Cellulose fibers/polyethylene hybrid composites: Effect of long chain organic acid cellulose esters and organic peroxide on rheology and tensile properties

      JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
    11. Gonzalez, F; Chassapis, C
      Fracture toughness variations of injection molded long fiber reinforced thermoplastics

      JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
    12. Patel, SH; Xanthos, M
      Environmental issues in polymer processing: A review on volatile emissionsand material/energy recovery options

      ADVANCES IN POLYMER TECHNOLOGY
    13. Chiba, K; Yasuda, K; Nakamura, K
      Numerical solution of fiber suspension flow through a parallel plate channel by coupling flow field with fiber orientation distribution

      JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
    14. Liu, SJ; Yang, CY
      Optimizing the weldline strength of injection molded liquid crystal polymers

      JOURNAL OF POLYMER ENGINEERING
    15. Aurich, T; Mennig, G
      Flow-induced fiber orientation in injection molded flax fiber reinforced polypropylene

      POLYMER COMPOSITES
    16. Liu, SJ; Chang, IT; Hung, SW
      Factors affecting the joint strength of ultrasonically welded polypropylene composites

      POLYMER COMPOSITES
    17. Thomason, JL
      Micromechanical parameters from macromechanical measurements on glass reinforced polyamide 6,6

      COMPOSITES SCIENCE AND TECHNOLOGY
    18. Eberhardt, C; Clarke, A; Vincent, M; Giroud, T; Flouret, S
      Fibre-orientation measurements in short-glass-fibre composites - II: a quantitative error estimate of the 2D image analysis technique

      COMPOSITES SCIENCE AND TECHNOLOGY
    19. Eberhardt, C; Clarke, A
      Fibre-orientation measurements in short-glass-fibre composites. Part I: automated, high-angular-resolution measurement by confocal microscopy

      COMPOSITES SCIENCE AND TECHNOLOGY
    20. Karakuzu, R; Atas, C; Akbulut, H
      Elastic-plastic behavior of woven-steel-fiber-reinforced thermoplastic laminated plates under in-plane loading

      COMPOSITES SCIENCE AND TECHNOLOGY
    21. Jung, SW; Kim, SY; Nam, HW; Han, KS
      Measurements of fiber orientation and elastic-modulus analysis in short-fiber-reinforced composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    22. Park, SJ; Lee, JR
      Roles of difunctional epoxy in the tetrafunctional epoxy matrix system

      JOURNAL OF MATERIALS SCIENCE LETTERS
    23. Stokes, VK
      The vibration welding of poly(methyl methacrylate) to itself and to polycarbonate, poly(butylene terephthalate), and modified poly(phenylene oxide)

      JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
    24. Stokes, VK
      The vibration welding of poly(butylene terephthalate) and a polycarbonate/poly(butylene terephthalate) blend to each other and to other resins and blends

      JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
    25. Ramazani, A; Ait-Kadi, A; Grmela, M
      Rheology of fiber suspensions in viscoelastic media: Experiments and modelpredictions

      JOURNAL OF RHEOLOGY
    26. Ramsteiner, F; Armbrust, T
      Fatigue crack growth in polymers

      POLYMER TESTING
    27. Martins, MH; De Paoli, MA
      Polypropylene compounding with recycled material I. Statistical response surface analysis

      POLYMER DEGRADATION AND STABILITY
    28. Bergstrom, J; Thuvander, F; Devos, P; Boher, C
      Wear of die materials in full scale plastic injection moulding of glass fibre reinforced polycarbonate

      WEAR
    29. Liu, CZ; Ren, LQ; Tong, J; Joyce, TJ; Green, SM; Arnell, RD
      Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6

      WEAR
    30. Kuusipalo, J
      Plastic coating of plywood using extrusion technique

      SILVA FENNICA
    31. Stokes, VK
      The vibration and hot-tool welding of polyamides

      POLYMER ENGINEERING AND SCIENCE
    32. Ozguler, A; Morris, SA; O'Brien, WD
      Ultrasonic monitoring of the seal quality in flexible food packages

      POLYMER ENGINEERING AND SCIENCE
    33. Oliveira, MJ; Bernardo, CA; Hemsley, DA
      Morphology and mechanical behavior of polypropylene hot plate welds

      POLYMER ENGINEERING AND SCIENCE
    34. Kim, JK; Park, SH; O, HT; Jeon, HK
      The effect of weld-lines on the morphology and mechanical properties of amorphous polyamide/poly(ethylene-ran-propylene) blend with various amounts of an in situ compatibilizer

      POLYMER
    35. Chang, JY; Hong, JL
      Polycyanurates modified with hydroxyl-terminated or cyanated poly(ether sulfone)

      POLYMER
    36. Mimura, K; Ito, H; Fujioka, H
      Toughening of epoxy resin modified with in situ polymerized thermoplastic polymers

      POLYMER
    37. Hillmansen, S; Haward, RN
      Adiabatic failure in polyethylene

      POLYMER
    38. Brostow, W; Cassidy, PE; Hagg, HE; Jaklewicz, M; Montemartini, PE
      Fluoropolymer addition to an epoxy: phase inversion and tribological properties

      POLYMER
    39. Stokes, VK; Conway, KR
      A phenomenological study of the hot-tool welding of thermoplastics. 4. Weld strength data for several blends

      POLYMER
    40. Michaud, V; Manson, JAE
      Impregnation of compressible fiber mats with a thermoplastic resin. Part I: Theory

      JOURNAL OF COMPOSITE MATERIALS
    41. Michaud, V; Tornqvist, R; Manson, JAE
      Impregnation of compressible fiber mats with a thermoplastic resin. Part II: Experiments

      JOURNAL OF COMPOSITE MATERIALS
    42. Megnis, M; Varna, J; Allen, DH; Holmberg, A
      Micromechanical modeling of viscoelastic response of GMT composite

      JOURNAL OF COMPOSITE MATERIALS
    43. Stael, GC; Tavares, MIB
      Solid-state carbon-13 NMR study of material composites based on sugarcane bagasse and thermoplastics polymers

      JOURNAL OF APPLIED POLYMER SCIENCE
    44. Guhanathan, S; Devi, MS; Murugesan, V
      Effect of coupling agents on the mechanical properties of fly ash/polyester particulate composites

      JOURNAL OF APPLIED POLYMER SCIENCE
    45. Nitz, H; Semke, H; Landers, R; Mulhaupt, R
      Reactive extrusion of polycaprolactone compounds containing wood flour andlignin

      JOURNAL OF APPLIED POLYMER SCIENCE
    46. Castillo-Ortega, MM; Encinas, JC; Rodriguez, DE; Olayo, R
      Preparation and characterization of electroconductive polypyrrole-thermoplastic composites

      JOURNAL OF APPLIED POLYMER SCIENCE
    47. Liang, GZ; Wang, D
      High-performance bismaleimide resin film for resin film infusion

      JOURNAL OF APPLIED POLYMER SCIENCE
    48. Yoon, TH; McGrath, JE
      Curing and toughening of a styrene-modified epoxy resin

      JOURNAL OF APPLIED POLYMER SCIENCE
    49. Harismendy, I; Del Rio, M; Marieta, C; Gavalda, J; Mondragon, I
      Dicyanate ester-polyetherimide semi-interpenetrating polymer networks. II.Effects of morphology on the fracture toughness and mechanical properties

      JOURNAL OF APPLIED POLYMER SCIENCE
    50. Song, XZ; Zheng, SX; Huang, JY; Zhu, PP; Guo, QP
      Miscibility and mechanical properties of tetrafunctional epoxy resin/phenolphthalein poly(ether ether ketone) blends

      JOURNAL OF APPLIED POLYMER SCIENCE
    51. Fernandez, B; Corcuera, MA; Marieta, C; Mondragon, I
      Rheokinetic variations during curing of a tetrafunctional epoxy resin modified with two thermoplastics

      EUROPEAN POLYMER JOURNAL
    52. Abad, MJ; Barral, L; Cano, J; Lopez, J; Nogueira, P; Ramirez, C; Torres, A
      Thermal decomposition behavior and the mechanical properties of an epoxy/cycloaliphatic amine resin with ABS

      EUROPEAN POLYMER JOURNAL
    53. Rozman, HD; Tay, GS; Kumar, RN; Abusamah, A; Ismail, H; Ishak, ZAM
      Polypropylene-oil palm empty fruit bunch-glass fibre hybrid composites: a preliminary study on the flexural and tensile properties

      EUROPEAN POLYMER JOURNAL
    54. Dweib, MA; Vahlund, CF; Bradaigh, MCO
      Fibre structure and anisotropy of glass reinforced thermoplastics

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    55. Stokes, VK
      Hot-tool and vibration welding of poly(vinyl chloride)

      JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
    56. Iijima, T; Hamakawa, S; Tomoi, M
      Preparation of poly(1,4-cyclohexylenedimethylene phthalate)s and their useas modifiers for aromatic diamine-cured epoxy resin

      POLYMER INTERNATIONAL
    57. Rozman, HD; Lai, CY; Ismail, H; Ishak, ZAM
      The effect of coupling agents on the mechanical and physical properties ofoil palm empty fruit bunch-polypropylene composites

      POLYMER INTERNATIONAL
    58. Wu, SJ; Tung, NP; Lin, TK; Shyu, SS
      Thermal and mechanical properties of PPO filled epoxy resins compatibilized by triallylisocyanurate

      POLYMER INTERNATIONAL
    59. Ruiz, MM; Cavaille, JY; Dufresne, A; Gerard, JF; Graillat, C
      Processing and characterization of new thermoset nanocomposites based on cellulose whiskers

      COMPOSITE INTERFACES
    60. Bernhardsson, J; Shishoo, R
      Effect of processing parameters on consolidation quality of GF/PP commingled yarn based composites

      JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
    61. Lu, JZ; Wu, QL; McNabb, HS
      Chemical coupling in wood fiber and polymer composites: A review of coupling agents and treatments

      WOOD AND FIBER SCIENCE
    62. Syrjala, S
      A new approach for the simulation of melting in extruders

      INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
    63. Saheb, DN; Jog, JP
      Compatibilization of PBT/polyolefin blends: Mechanical and dynamic mechanical properties

      ADVANCES IN POLYMER TECHNOLOGY
    64. Siddhamalli, SK
      Phase-separation behavior in poly(ether imide)-modified epoxy blends

      POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
    65. Kansal, G; Atreya, SK; Rao, PN
      Thermal and stress analysis of an injection-molded polystyrene ring

      POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
    66. Rozman, HD; Lee, MH; Kumar, RN; Abusamah, A; Ishak, ZAM
      The effect of chemical modification of rice husk with glycidyl methacrylate on the mechanical and physical properties of rice husk-polystyrene composites

      JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY
    67. Tjong, SC; Jiang, W
      In-situ reinforcement of PBT/ABS blends with liquid crystalline polymer

      POLYMER COMPOSITES
    68. Carneiro, OS; Maia, JM
      Rheological behavior of (Short) carbon fiber/thermoplastic composites. Part 1: The influence of fiber type, processing conditions and level of incorporation

      POLYMER COMPOSITES
    69. Stokes, VK; Inzinna, LP; Liang, EW; Trantina, GG; Woods, JT
      A phenomenological study of the mechanical properties of long-fiber filledinjection-molded thermoplastic composites

      POLYMER COMPOSITES
    70. Elleithy, RH
      The hierarchical structure and flexure behavior of woven carbon fiber epoxy composite

      POLYMER COMPOSITES
    71. Siddhamalli, SK
      Toughening of epoxy/polycaprolactone composites via reaction induced phaseseparation

      POLYMER COMPOSITES
    72. Karger-Kocsis, J
      Swirl mat- and long discontinuous fiber mat-reinforced polypropylene composites - Status and future trends

      POLYMER COMPOSITES
    73. Zak, G; Haberer, M; Park, CB; Benhabib, B
      Estimation of average fibre length in short-fibre composites by a two-section method

      COMPOSITES SCIENCE AND TECHNOLOGY
    74. Ishak, ZAM; Ishiaku, US; Karger-Kocsis, J
      Hygrothermal aging and fracture behavior of short-glass-fiber-reinforced rubber-toughened poly(butylene terephthalate) composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    75. Todo, M; Takahashi, K; Beguelin, P; Kausch, HH
      Strain-rate dependence of the tensile fracture behaviour of woven-cloth reinforced polyamide composites

      COMPOSITES SCIENCE AND TECHNOLOGY
    76. Varela, AE
      Self-tuning pressure control in an injection moulding cavity during filling

      CHEMICAL ENGINEERING RESEARCH & DESIGN
    77. Buethe, I
      Polymers beyond the year 2000

      CHINESE JOURNAL OF POLYMER SCIENCE
    78. Khakimullin, YN; Kimel'blat, VI; Chebotareva, IG; Muruzina, EV; Murafa, AV; Khozin, VG; Vol'fson, SI
      Properties of bitumens modified by thermoplastic elastomers

      MECHANICS OF COMPOSITE MATERIALS
    79. Tervoort, TA; Govaert, LE
      Strain-hardening behavior of polycarbonate in the glassy state

      JOURNAL OF RHEOLOGY
    80. Salamat-Zadeh, F; Allen, KW; Winfield, PH; Hutchinson, AR
      Self-hot-melt joining of polymers to lacquered metal surfaces

      INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
    81. Zufall, SW; Kusy, RP
      Stress relaxation and recovery behaviour of composite orthodontic archwires in bending

      EUROPEAN JOURNAL OF ORTHODONTICS
    82. Hinksman, P; Isaac, DH; Morrissey, P
      Environmental stress cracking of poly(vinylidene fluoride) and welds in alkaline solutions

      POLYMER DEGRADATION AND STABILITY
    83. Scavuzzo, RJ
      Oscillating stress on viscoelastic behavior of thermoplastic polymers

      JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
    84. Herrera, JR; Mena, B
      A note on Newtonian and non-Newtonian oscillatory pipe flows

      REVISTA MEXICANA DE FISICA
    85. Hojbota, G; Rusu, M; Buruntea, N
      Polyolefines-based biodegradable composites

      REVISTA DE CHIMIE
    86. Liu, SJ; Wu, JY; Chang, JH; Hung, SW
      An experimental matrix design to optimize the weldline strength in injection molded parts

      POLYMER ENGINEERING AND SCIENCE
    87. Stokes, VK
      The vibration welding of polycarbonate/acrylonitrile-butadiene-styrene blends to themselves and to other resins and blends

      POLYMER ENGINEERING AND SCIENCE
    88. Martinez, I; Martin, MD; Eceiza, A; Oyanguren, P; Mondragon, I
      Phase separation in polysulfone-modified epoxy mixtures. Relationships between curing conditions, molphology and ultimate behavior

      POLYMER
    89. Zhu, B; Katsoulis, DE; Keryk, JR; McGarry, FJ
      Toughening of a polysilsesquioxane network by homogeneous incorporation ofpolydimethylsiloxane segments

      POLYMER
    90. Mimura, K; Ito, H; Fujioka, H
      Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins

      POLYMER
    91. Chang, JY; Hong, JL
      Morphology and fracture toughness of poly(ether sulfone)-blended polycyanurates

      POLYMER
    92. Stokes, VK
      A phenomenological study of the hot-tool welding of thermoplastics Part 2.Unfilled and glass-filled poly(butylene terephthalate)

      POLYMER
    93. Li, TQ; Zhang, MQ; Zhang, K; Zeng, HM
      Long-range effects of carbon fiber on crystallization of semicrystalline thermoplastics

      POLYMER
    94. Kim, JK; Park, SH
      Fiber orientation and rheological properties of short fiber-reinforced plastics at higher shear rates

      JOURNAL OF MATERIALS SCIENCE
    95. Song, XZ; Zheng, SX; Huang, JY; Zhu, PP; Guo, QP
      Miscibility, morphology and fracture toughness of tetrafunctional epoxy resin/poly (styrene-co-acrylonitrile) blends

      JOURNAL OF MATERIALS SCIENCE
    96. Ersoy, N; Vardar, O
      Measurement of residual stresses in layered composites by compliance method

      JOURNAL OF COMPOSITE MATERIALS
    97. Razi, PS; Raman, A
      Studies on impact fracture properties of wood-polymer composites

      JOURNAL OF COMPOSITE MATERIALS
    98. Wyser, Y; Leterrier, Y; Manson, JAE
      Effect of inclusions and blending on the mechanical performance of recycled multilayer PP/PET/SiOx films

      JOURNAL OF APPLIED POLYMER SCIENCE
    99. Siddhamalli, SK; Kyu, T
      Toughening of thermoset/thermoplastic composites via reaction-induced phase separation: Epoxy/phenoxy blends

      JOURNAL OF APPLIED POLYMER SCIENCE
    100. Wu, JS; Yu, DM; Chan, CM; Kim, JK; Mai, YM
      Effect of fiber pretreatment condition on the interfacial strength and mechanical properties of wood fiber/PP composites

      JOURNAL OF APPLIED POLYMER SCIENCE


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 20/10/20 alle ore 14:05:28