Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Keuler, JN; Lorenzen, L
   Developing a heating procedure to optimise hydrogen permeance through Pd-Ag membranes of thickness less than 2.2 mu m
   JOURNAL OF MEMBRANE SCIENCE
   
   J.N. Keuler e L. Lorenzen, "Developing a heating procedure to optimise hydrogen permeance through Pd-Ag membranes of thickness less than 2.2 mu m", J MEMBR SCI, 195(2), 2002, pp. 203-213
2. Ma, H; Berthier, Y; Marcus, P
   NH3 probing of the surface acidity of passive films on chromium
   CORROSION SCIENCE
   
   H. Ma et al., "NH3 probing of the surface acidity of passive films on chromium", CORROS SCI, 44(1), 2002, pp. 171-178
3. Morel, F
   A critical plane fatigue model applied to out-of-phase bending and torsionload conditions
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
   
   F. Morel, "A critical plane fatigue model applied to out-of-phase bending and torsionload conditions", FATIG FRACT, 24(3), 2001, pp. 153-164
4. Kelestemur, MH; Chaki, TK
   The effect of overload on the fatigue crack growth behaviour of 304 stainless steel in hydrogen
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
   
   M.H. Kelestemur e T.K. Chaki, "The effect of overload on the fatigue crack growth behaviour of 304 stainless steel in hydrogen", FATIG FRACT, 24(1), 2001, pp. 15-22
5. Boyan, BD; Lohmann, CH; Dean, DD; Sylvia, VL; Cochran, DL; Schwartz, Z
   Mechanisms involved in osteoblast response to implant surface morphology
   ANNUAL REVIEW OF MATERIALS RESEARCH
   
   B.D. Boyan et al., "Mechanisms involved in osteoblast response to implant surface morphology", ANN REV M R, 31, 2001, pp. 357-371
6. Kunigk, L; Almeida, MCB
   Action of peracetic acid on Escherichia coli and Staphylococcus aureus in suspension and on stainless steel surfaces
   BRAZILIAN JOURNAL OF MICROBIOLOGY
   
   L. Kunigk e M.C.B. Almeida, "Action of peracetic acid on Escherichia coli and Staphylococcus aureus in suspension and on stainless steel surfaces", BRAZ J MICR, 32(1), 2001, pp. 38-41
7. Luo, XC; Chung, DDL
   Degradation of mechanically fastened stainless steel joint during repeatedfastening and unfastening
   ADVANCED ENGINEERING MATERIALS
   
   X.C. Luo e D.D.L. Chung, "Degradation of mechanically fastened stainless steel joint during repeatedfastening and unfastening", ADV ENG MAT, 3(1-2), 2001, pp. 62-65
8. Pyun, SI; Na, KH; Park, JJ
   Morphological studies of the mechanism of pit growth of pure aluminum in sulfate ion- or nitrate ion-containing 0.1 M NaCl solutions
   JOURNAL OF SOLID STATE ELECTROCHEMISTRY
   
   S.I. Pyun et al., "Morphological studies of the mechanism of pit growth of pure aluminum in sulfate ion- or nitrate ion-containing 0.1 M NaCl solutions", J SOL ST EL, 5(7-8), 2001, pp. 473-478
9. Nakanishi, K; Sakiyama, T; Imamura, K
   On the adsorption of proteins on solid surfaces, a common but very complicated phenomenon
   JOURNAL OF BIOSCIENCE AND BIOENGINEERING
   
   K. Nakanishi et al., "On the adsorption of proteins on solid surfaces, a common but very complicated phenomenon", J BIOSCI BI, 91(3), 2001, pp. 233-244
10. Leinartas, K; Samuleviciene, M; Bagdonas, A; Sudavicius, A; Lisauskas, V; Juzeliunas, E
    Electrochemical and microgravimetric characterization of magnetron-sputtered Fe-Cr-Ni-Ta and Fe-Cr-Ni alloy films in neutral and strongly acidic media
    ELECTROCHEMISTRY COMMUNICATIONS
    
    K. Leinartas et al., "Electrochemical and microgravimetric characterization of magnetron-sputtered Fe-Cr-Ni-Ta and Fe-Cr-Ni alloy films in neutral and strongly acidic media", ELECTROCH C, 3(9), 2001, pp. 494-499
11. Lin, YM; Rei, MH
    Separation of hydrogen from the gas mixture out of catalytic reformer by using supported palladium membrane
    SEPARATION AND PURIFICATION TECHNOLOGY
    
    Y.M. Lin e M.H. Rei, "Separation of hydrogen from the gas mixture out of catalytic reformer by using supported palladium membrane", SEP PURIF T, 25(1-3), 2001, pp. 87-95
12. Uemiya, S; Kato, W; Uyama, A; Kajiwara, M; Kojima, T; Kikuchi, E
    Separation of hydrogen from gas mixtures using supported platinum-group metal membranes
    SEPARATION AND PURIFICATION TECHNOLOGY
    
    S. Uemiya et al., "Separation of hydrogen from gas mixtures using supported platinum-group metal membranes", SEP PURIF T, 22-3(1-3), 2001, pp. 309-317
13. Dittmeyer, R; Hollein, V; Daub, K
    Membrane reactors for hydrogenation and dehydrogenation processes based onsupported palladium
    JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
    
    R. Dittmeyer et al., "Membrane reactors for hydrogenation and dehydrogenation processes based onsupported palladium", J MOL CAT A, 173(1-2), 2001, pp. 135-184
14. Meylheuc, T; van Oss, CJ; Bellon-Fontaine, MN
    Adsorption of biosurfactant on solid surfaces and consequences regarding the bioadhesion of Listeria monocytogenes LO28
    JOURNAL OF APPLIED MICROBIOLOGY
    
    T. Meylheuc et al., "Adsorption of biosurfactant on solid surfaces and consequences regarding the bioadhesion of Listeria monocytogenes LO28", J APPL MICR, 91(5), 2001, pp. 822-832
15. Kalmokoff, ML; Austin, JW; Wan, XD; Sanders, G; Banerjee, S; Farber, JM
    Adsorption, attachment and biofilm formation among isolates of Listeria monocytogenes using model conditions
    JOURNAL OF APPLIED MICROBIOLOGY
    
    M.L. Kalmokoff et al., "Adsorption, attachment and biofilm formation among isolates of Listeria monocytogenes using model conditions", J APPL MICR, 91(4), 2001, pp. 725-734
16. Beresford, MR; Andrew, PW; Shama, G
    Listeria monocytogenes adheres to many materials found in food-processing environments
    JOURNAL OF APPLIED MICROBIOLOGY
    
    M.R. Beresford et al., "Listeria monocytogenes adheres to many materials found in food-processing environments", J APPL MICR, 90(6), 2001, pp. 1000-1005
17. Mao, SX; Gu, B; Wu, NQ; Qiao, L
    The mechanism of hydrogen-facilitated anodic-dissolution-type stress corrosion cracking: theories and experiments
    PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    
    S.X. Mao et al., "The mechanism of hydrogen-facilitated anodic-dissolution-type stress corrosion cracking: theories and experiments", PHIL MAG A, 81(7), 2001, pp. 1813-1831
18. Belyakov, A; Sakai, T; Miura, H; Tsuzaki, K
    Grain refinement in copper under large strain deformation
    PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    
    A. Belyakov et al., "Grain refinement in copper under large strain deformation", PHIL MAG A, 81(11), 2001, pp. 2629-2643
19. Babu, SS; David, SA; Vitek, JM; Reed, RW
    Solidification and microstructure modelling of welds in aluminium alloys 5754 and 6111
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
    
    S.S. Babu et al., "Solidification and microstructure modelling of welds in aluminium alloys 5754 and 6111", SCI TEC W J, 6(1), 2001, pp. 31-40
20. Gutkin, MY; Mikaelyan, KN; Verijenko, VE
    Dislocation-disclination model of heterogeneous nucleation of HCP-martensite
    SCRIPTA MATERIALIA
    
    M.Y. Gutkin et al., "Dislocation-disclination model of heterogeneous nucleation of HCP-martensite", SCR MATER, 45(8), 2001, pp. 939-945
21. Orhan, N; Khan, TI; Eroglu, M
    Diffusion bonding of a microduplex stainless steel to Ti-6Al-4V
    SCRIPTA MATERIALIA
    
    N. Orhan et al., "Diffusion bonding of a microduplex stainless steel to Ti-6Al-4V", SCR MATER, 45(4), 2001, pp. 441-446
22. Belyakov, A; Sakai, Y; Hara, T; Kimura, Y; Tsuzaki, K
    Thermal stability of ultra fine-grained steel containing dispersed oxides
    SCRIPTA MATERIALIA
    
    A. Belyakov et al., "Thermal stability of ultra fine-grained steel containing dispersed oxides", SCR MATER, 45(10), 2001, pp. 1213-1219
23. Song, JM; Chou, TS; Chen, LH; Lui, TS
    Texture examination on strip-cast Fe-C-Si white cast iron
    SCRIPTA MATERIALIA
    
    J.M. Song et al., "Texture examination on strip-cast Fe-C-Si white cast iron", SCR MATER, 44(7), 2001, pp. 1125-1130
24. Liu, ZY; Loh, NH; Khor, KA; Tor, SB
    Sintering activation energy of powder injection molded 316L stainless steel
    SCRIPTA MATERIALIA
    
    Z.Y. Liu et al., "Sintering activation energy of powder injection molded 316L stainless steel", SCR MATER, 44(7), 2001, pp. 1131-1137
25. Zeng, DW; Xie, CS; Hu, QW; Yung, KC
    Corrosion resistance enhancement of Ni-resist ductile iron by laser surface alloying
    SCRIPTA MATERIALIA
    
    D.W. Zeng et al., "Corrosion resistance enhancement of Ni-resist ductile iron by laser surface alloying", SCR MATER, 44(4), 2001, pp. 651-657
26. Sakai, T; Hamada, S; Saito, Y
    Improvement of the r-value in 5052 aluminum alloy sheets having through-thickness shear texture by 2-pass single-roll drive unidirectional shear rolling
    SCRIPTA MATERIALIA
    
    T. Sakai et al., "Improvement of the r-value in 5052 aluminum alloy sheets having through-thickness shear texture by 2-pass single-roll drive unidirectional shear rolling", SCR MATER, 44(11), 2001, pp. 2569-2573
27. Galiyev, A; Kaibyshev, R; Gottstein, G
    Correlation of plastic deformation and dynamic recrystallization in magnesium alloy Zk60
    ACTA MATERIALIA
    
    A. Galiyev et al., "Correlation of plastic deformation and dynamic recrystallization in magnesium alloy Zk60", ACT MATER, 49(7), 2001, pp. 1199-1207
28. Yang, R; Zhao, DL; Wang, YM; Wang, SQ; Ye, HQ; Wang, CY
    Effects of Cr, Nn on the cohesion of the gamma-iron grain boundary
    ACTA MATERIALIA
    
    R. Yang et al., "Effects of Cr, Nn on the cohesion of the gamma-iron grain boundary", ACT MATER, 49(6), 2001, pp. 1079-1085
29. Ueda, M; Yasuda, HY; Umakoshi, Y
    Stress-induced martensitic transformation in Fe-Ni bicrystals
    ACTA MATERIALIA
    
    M. Ueda et al., "Stress-induced martensitic transformation in Fe-Ni bicrystals", ACT MATER, 49(20), 2001, pp. 4251-4258
30. Gutkin, MY; Mikaelyan, KN; Verijenko, VE
    Heterogeneous nucleation of martensite near free surface
    ACTA MATERIALIA
    
    M.Y. Gutkin et al., "Heterogeneous nucleation of martensite near free surface", ACT MATER, 49(18), 2001, pp. 3811-3819
31. Kim, KH; Lee, DN
    Analysis of deformation textures of asymmetrically rolled aluminum sheets
    ACTA MATERIALIA
    
    K.H. Kim e D.N. Lee, "Analysis of deformation textures of asymmetrically rolled aluminum sheets", ACT MATER, 49(13), 2001, pp. 2583-2595
32. Dye, D; Stone, HJ; Reed, RC
    Intergranular and interphase microstresses
    CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
    
    D. Dye et al., "Intergranular and interphase microstresses", CURR OP SOL, 5(1), 2001, pp. 31-37
33. Sitdikov, O; Kaibyshev, R
    Dynamic recrystallization in pure magnesium
    MATERIALS TRANSACTIONS
    
    O. Sitdikov e R. Kaibyshev, "Dynamic recrystallization in pure magnesium", MATER TRANS, 42(9), 2001, pp. 1928-1937
34. Galiyev, A; Kaibyshev, R
    Microstructural evolution in ZK60 magnesium alloy during severe plastic deformation
    MATERIALS TRANSACTIONS
    
    A. Galiyev e R. Kaibyshev, "Microstructural evolution in ZK60 magnesium alloy during severe plastic deformation", MATER TRANS, 42(7), 2001, pp. 1190-1199
35. Lee, WS; Lin, CF
    Effects of prestrainning on the impact response and twinning structure of 304L stainless steel
    MATERIALS TRANSACTIONS
    
    W.S. Lee e C.F. Lin, "Effects of prestrainning on the impact response and twinning structure of 304L stainless steel", MATER TRANS, 42(10), 2001, pp. 2080-2086
36. Waki, H; Ogura, K; Nishikawa, I
    Notch root biaxial cyclic strain behavior of type 304 stainless steel at elevated temperature using laser speckle strain/displacement gauge
    JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    
    H. Waki et al., "Notch root biaxial cyclic strain behavior of type 304 stainless steel at elevated temperature using laser speckle strain/displacement gauge", JSME A, 44(3), 2001, pp. 374-382
37. Kaczorowski, D; Georges, JM; Bec, S; Tonck, A; Vannes, AB; Vernot, JP
    Wear of a stainless steel in pressurised high temperature water
    COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE IV PHYSIQUE ASTROPHYSIQUE
    
    D. Kaczorowski et al., "Wear of a stainless steel in pressurised high temperature water", CR AC S IV, 2(5), 2001, pp. 739-747
38. Goudeau, P; Renault, PO; Badawi, KF; Villain, P
    X-ray diffraction analysis residual stresses and elasticity constants in thin films
    VIDE-SCIENCE TECHNIQUE ET APPLICATIONS
    
    P. Goudeau et al., "X-ray diffraction analysis residual stresses and elasticity constants in thin films", VIDE, 56(301), 2001, pp. 541
39. Kim, WG; Kim, SH; Ryu, WS
    Creep characterization of type 316LN and HT-9 stainless steels by the K-R creep damage model
    KSME INTERNATIONAL JOURNAL
    
    W.G. Kim et al., "Creep characterization of type 316LN and HT-9 stainless steels by the K-R creep damage model", KSME INT J, 15(11), 2001, pp. 1463-1471
40. Haddou, H; Gaudin, C; Feaugas, X
    Stacking fault energy (s.f.e.) and grain size effects (d) on the tensile behaviour of f.c.c. polycrystalline alloys at 300 K: Back stress and effective stress evolutions
    JOURNAL DE PHYSIQUE IV
    
    H. Haddou et al., "Stacking fault energy (s.f.e.) and grain size effects (d) on the tensile behaviour of f.c.c. polycrystalline alloys at 300 K: Back stress and effective stress evolutions", J PHYS IV, 11(PR4), 2001, pp. 283-291
41. Silberschmidt, VV; Werner, EA
    The influence of the microstructure on the effective properties of duplex-type materials under purely thermal loading
    JOURNAL DE PHYSIQUE IV
    
    V.V. Silberschmidt e E.A. Werner, "The influence of the microstructure on the effective properties of duplex-type materials under purely thermal loading", J PHYS IV, 11(PR4), 2001, pp. 349-356
42. Riviere, JP; Brin, C; Meheust, P; Villain, JP; Cauvin, R
    Influence of a high-flux nitrogen implantation treatment on wear resistance of austenitic steel
    JOURNAL DE PHYSIQUE IV
    
    J.P. Riviere et al., "Influence of a high-flux nitrogen implantation treatment on wear resistance of austenitic steel", J PHYS IV, 11(PR1), 2001, pp. 71-78
43. Machet, A; Galtayries, A; Marcus, P; Gelpi, A; Brun, C; Combrade, P
    X-ray photoelectron spectroscopy of oxide layers formed in high-temperature water on nickel alloys
    JOURNAL DE PHYSIQUE IV
    
    A. Machet et al., "X-ray photoelectron spectroscopy of oxide layers formed in high-temperature water on nickel alloys", J PHYS IV, 11(PR1), 2001, pp. 79-88
44. de Souza, S; da Silva, JEP; de Torresi, SIC; Temperini, MLA; Torresi, RM
    Polyaniline based acrylic blends for iron corrosion protection
    ELECTROCHEMICAL AND SOLID STATE LETTERS
    
    S. de Souza et al., "Polyaniline based acrylic blends for iron corrosion protection", EL SOLID ST, 4(8), 2001, pp. B27-B30
45. Chauvy, PF; Hoffmann, P; Landolt, D
    Electrochemical micromachining of titanium through a laser patterned oxidefilm
    ELECTROCHEMICAL AND SOLID STATE LETTERS
    
    P.F. Chauvy et al., "Electrochemical micromachining of titanium through a laser patterned oxidefilm", EL SOLID ST, 4(5), 2001, pp. C31-C34
46. Ezugwu, EO; Olajire, KA; Jawaid, A
    Wear performance of multilayer-coated carbide tools
    MACHINING SCIENCE AND TECHNOLOGY
    
    E.O. Ezugwu et al., "Wear performance of multilayer-coated carbide tools", MACH SCI T, 5(1), 2001, pp. 115-129
47. Jacobus, K; DeVor, RE; Kapoor, SG; Peascoe, RA
    Predictive model for the full biaxial surface and subsurface residual stress profiles from turning
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
    
    K. Jacobus et al., "Predictive model for the full biaxial surface and subsurface residual stress profiles from turning", J MANUF SCI, 123(4), 2001, pp. 537-546
48. Kertesz, V; Van Berkel, GJ
    Minimizing analyte electrolysis in an electrospray emitter
    JOURNAL OF MASS SPECTROMETRY
    
    V. Kertesz e G.J. Van Berkel, "Minimizing analyte electrolysis in an electrospray emitter", J MASS SPEC, 36(2), 2001, pp. 204-210
49. Van Berkel, GJ; Kertesz, V
    Redox buffering in an electrospray ion source using a copper capillary emitter
    JOURNAL OF MASS SPECTROMETRY
    
    G.J. Van Berkel e V. Kertesz, "Redox buffering in an electrospray ion source using a copper capillary emitter", J MASS SPEC, 36(10), 2001, pp. 1125-1132
50. Hallab, N
    Metal sensitivity in patients with orthopedic implants
    JCR-JOURNAL OF CLINICAL RHEUMATOLOGY
    
    N. Hallab, "Metal sensitivity in patients with orthopedic implants", JCR-J CLIN, 7(4), 2001, pp. 215-218
51. Juntunen, P; Raabe, D; Karjalainen, P; Kopio, T; Bolle, G
    Optimizing continuous annealing of interstitial-free steels for improving deep drawability
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    P. Juntunen et al., "Optimizing continuous annealing of interstitial-free steels for improving deep drawability", MET MAT T A, 32(8), 2001, pp. 1989-1995
52. Belyakov, A; Sakai, Y; Hara, T; Kimura, Y; Tsuzaki, K
    Effect of dispersed particles on microstructure evolved in iron under mechanical milling followed by consolidating rolling
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    A. Belyakov et al., "Effect of dispersed particles on microstructure evolved in iron under mechanical milling followed by consolidating rolling", MET MAT T A, 32(7), 2001, pp. 1769-1776
53. Hurley, PJ; Muddle, BC; Hodgson, PD
    Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    P.J. Hurley et al., "Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling", MET MAT T A, 32(6), 2001, pp. 1507-1517
54. Chen, W; Chaturvedi, MC; Richards, NL
    Effect of boron segregation at grain boundaries on heat-affected zone cracking in wrought INCONEL 718
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    W. Chen et al., "Effect of boron segregation at grain boundaries on heat-affected zone cracking in wrought INCONEL 718", MET MAT T A, 32(4), 2001, pp. 931-939
55. Xiao, L; Umakoshi, Y; Sun, J
    Cyclic deformation behavior and microstructures of hydrided ZIRCALOY-4 under biaxial loading
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    L. Xiao et al., "Cyclic deformation behavior and microstructures of hydrided ZIRCALOY-4 under biaxial loading", MET MAT T A, 32(11), 2001, pp. 2841-2850
56. Dallaire, S
    Hard arc-sprayed coating with enhanced erosion and abrasion wear resistance
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    S. Dallaire, "Hard arc-sprayed coating with enhanced erosion and abrasion wear resistance", J THERM SPR, 10(3), 2001, pp. 511-519
57. Kuroda, S; Tashiro, Y; Yumoto, H; Taira, S; Fukanuma, H; Tobe, S
    Peening action and residual stresses in high-velocity oxygen fuel thermal spraying of 316L stainless steel
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    S. Kuroda et al., "Peening action and residual stresses in high-velocity oxygen fuel thermal spraying of 316L stainless steel", J THERM SPR, 10(2), 2001, pp. 367-374
58. Ben Rhouma, A; Braham, C; Fitzpatrick, ME; Ledion, J; Sidhom, H
    Effects of surface preparation on pitting resistance, residual stress, andstress corrosion cracking in austenitic stainless steels
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    A. Ben Rhouma et al., "Effects of surface preparation on pitting resistance, residual stress, andstress corrosion cracking in austenitic stainless steels", J MAT ENG P, 10(5), 2001, pp. 507-514
59. Hsieh, RI; Liou, HY; Pan, YT
    Effects of cooling time and alloying elements on the microstructure of thegleeble-simulated heat-affected zone of 22% Cr duplex stainless steels
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    R.I. Hsieh et al., "Effects of cooling time and alloying elements on the microstructure of thegleeble-simulated heat-affected zone of 22% Cr duplex stainless steels", J MAT ENG P, 10(5), 2001, pp. 526-536
60. Valente, T
    Fireside corrosion of superheater materials in chlorine containing flue gas
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    T. Valente, "Fireside corrosion of superheater materials in chlorine containing flue gas", J MAT ENG P, 10(5), 2001, pp. 608-613
61. Mohamed, H
    Effect of aging and cold rolling on the microstructure and mechanical properties of a new Fe-Mn-Al-Cr-C duplex alloy
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    H. Mohamed, "Effect of aging and cold rolling on the microstructure and mechanical properties of a new Fe-Mn-Al-Cr-C duplex alloy", J MAT ENG P, 10(4), 2001, pp. 405-409
62. Hocheng, H; Kao, PS; Chen, YF
    Electropolishing of 316L stainless steel for anticorrosion passivation
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    H. Hocheng et al., "Electropolishing of 316L stainless steel for anticorrosion passivation", J MAT ENG P, 10(4), 2001, pp. 414-418
63. Ruiz-Navas, EM; Anton, N; Gordo, E; Navalpotro, R; Velasco, F
    Wear behavior of a ferritic stainless steel with carbides manufactured through powder metallurgy
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    E.M. Ruiz-Navas et al., "Wear behavior of a ferritic stainless steel with carbides manufactured through powder metallurgy", J MAT ENG P, 10(4), 2001, pp. 479-483
64. Tsay, LW; Chen, WY; Shiue, RK; Shiue, RH
    Stress corrosion cracking of A588 steel weldments in flue gas related environments
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    L.W. Tsay et al., "Stress corrosion cracking of A588 steel weldments in flue gas related environments", J MAT ENG P, 10(3), 2001, pp. 371-377
65. Lieu, HY; Pan, YT; Hsieh, RL; Tsai, WT
    Effects of alloying elements on the mechanical properties and corrosion behaviors of 2205 duplex stainless steels
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    H.Y. Lieu et al., "Effects of alloying elements on the mechanical properties and corrosion behaviors of 2205 duplex stainless steels", J MAT ENG P, 10(2), 2001, pp. 231-241
66. Parvathavarthini, N; Subbarao, RV; Kumar, S; Dayal, RK; Khatak, HS
    Elimination of intergranular corrosion susceptibility of cold-worked and sensitized AISI 316 SS by laser surface melting
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    N. Parvathavarthini et al., "Elimination of intergranular corrosion susceptibility of cold-worked and sensitized AISI 316 SS by laser surface melting", J MAT ENG P, 10(1), 2001, pp. 5-13
67. Sha, CK; Tsai, HL
    Hardfacing characteristics of S42000 stainless steel by using CO2 laser
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    C.K. Sha e H.L. Tsai, "Hardfacing characteristics of S42000 stainless steel by using CO2 laser", J MAT ENG P, 10(1), 2001, pp. 37-41
68. Fabritsiev, SA; Pokrovsky, AS; Edwards, DJ; Zinkle, SJ; Rowcliffe, AF
    Effect of neutron irradiation on the mechanical properties and fracture mode of Cu/SS joints
    PLASMA DEVICES AND OPERATIONS
    
    S.A. Fabritsiev et al., "Effect of neutron irradiation on the mechanical properties and fracture mode of Cu/SS joints", PLASMA D OP, 8(4), 2001, pp. 225-239
69. Watanabe, T; Matsumoto, K; Tanigawa, T; Maeda, T; Hirabayashi, I
    Surface-oxidation epitaxy of Ni-clad Ni-20wt%Cr and Ni-clad austenitic stainless steel tapes for Y-Ba-Cu-O coated conductors
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    
    T. Watanabe et al., "Surface-oxidation epitaxy of Ni-clad Ni-20wt%Cr and Ni-clad austenitic stainless steel tapes for Y-Ba-Cu-O coated conductors", IEEE APPL S, 11(1), 2001, pp. 3134-3137
70. Shaw, BA; McCosby, MM; Abdullah, AM; Pickering, HW
    The localized corrosion of Al 6XXX alloys
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    
    B.A. Shaw et al., "The localized corrosion of Al 6XXX alloys", JOM-J MIN, 53(7), 2001, pp. 42-46
71. Colas, R
    On the variation of grain size and fractal dimension in an austenitic stainless steel
    MATERIALS CHARACTERIZATION
    
    R. Colas, "On the variation of grain size and fractal dimension in an austenitic stainless steel", MATER CHAR, 46(5), 2001, pp. 353-358
72. Matula, M; Hyspecka, L; Svoboda, M; Vodarek, V; Dagbert, C; Galland, J; Stonawska, Z; Tuma, L
    Intergranular corrosion of AISI 316L steel
    MATERIALS CHARACTERIZATION
    
    M. Matula et al., "Intergranular corrosion of AISI 316L steel", MATER CHAR, 46(2-3), 2001, pp. 203-210
73. Kliauga, AM; Travessa, D; Ferrante, M
    Al2O3/Ti interlayer/AISI 304 diffusion bonded joint - Microstructural characterization of the two interfaces
    MATERIALS CHARACTERIZATION
    
    A.M. Kliauga et al., "Al2O3/Ti interlayer/AISI 304 diffusion bonded joint - Microstructural characterization of the two interfaces", MATER CHAR, 46(1), 2001, pp. 65-74
74. Biro, E; Zhou, Y; Weckman, DC; Ely, KJ
    The effects of Ni and Au/Ni platings on laser welding of thin sheets
    JOURNAL OF LASER APPLICATIONS
    
    E. Biro et al., "The effects of Ni and Au/Ni platings on laser welding of thin sheets", J LASER APP, 13(3), 2001, pp. 96-104
75. Sexton, CL; Byrne, G; Watkins, KG
    Alloy development by laser cladding: An overview
    JOURNAL OF LASER APPLICATIONS
    
    C.L. Sexton et al., "Alloy development by laser cladding: An overview", J LASER APP, 13(1), 2001, pp. 2-11
76. Chu, WY; Qiao, LJ; Gao, KW
    Investigation of stress corresion cracking under anodic dissolution control
    CHINESE SCIENCE BULLETIN
    
    W.Y. Chu et al., "Investigation of stress corresion cracking under anodic dissolution control", CHIN SCI B, 46(9), 2001, pp. 717-722
77. Qin, HN
    Research of cold-rolling oil for stainless sheet steel
    SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY
    
    H.N. Qin, "Research of cold-rolling oil for stainless sheet steel", SCI CHINA A, 44, 2001, pp. 142-148
78. Sofronis, P; Liang, Y; Aravas, N
    Hydrogen induced shear localization of the plastic flow in metals and alloys
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
    
    P. Sofronis et al., "Hydrogen induced shear localization of the plastic flow in metals and alloys", EUR J MEC A, 20(6), 2001, pp. 857-872
79. Fujita, N; Matsuura, C; Saigo, K
    Radiation-induced preferential dissolution of specific planes of carbon steel in high-temperature water
    RADIATION PHYSICS AND CHEMISTRY
    
    N. Fujita et al., "Radiation-induced preferential dissolution of specific planes of carbon steel in high-temperature water", RADIAT PH C, 60(1-2), 2001, pp. 53-60
80. Ford, SI; Munroe, PR; Young, DJ
    Microstructural analysis of carbonitrided austenitic steels
    MICRON
    
    S.I. Ford et al., "Microstructural analysis of carbonitrided austenitic steels", MICRON, 32(8), 2001, pp. 817-824
81. Figa-Talamanca, I; Traina, ME; Urbani, E
    Occupational exposures to metals, solvents and pesticides: recent evidenceon male reproductive effects and biological markers
    OCCUPATIONAL MEDICINE-OXFORD
    
    I. Figa-Talamanca et al., "Occupational exposures to metals, solvents and pesticides: recent evidenceon male reproductive effects and biological markers", OCCUP MED-O, 51(3), 2001, pp. 174-188
82. Pint, BA; Zhang, Y; Tortorelli, PF; Haynes, JA; Wright, IG
    Evaluation of iron-aluminide CVD coatings for high temperature corrosion protection
    MATERIALS AT HIGH TEMPERATURES
    
    B.A. Pint et al., "Evaluation of iron-aluminide CVD coatings for high temperature corrosion protection", MATER HIGH, 18(3), 2001, pp. 185-192
83. Chabaud-Reytier, M; Allais, L; Poquillon, D; Caes-Hogrel, C; Mottot, M; Pineau, A
    Modelling creep damage in heat affected zone in 321 stainless steel. Part I: Quantitative study of intergranular damage
    MATERIALS AT HIGH TEMPERATURES
    
    M. Chabaud-Reytier et al., "Modelling creep damage in heat affected zone in 321 stainless steel. Part I: Quantitative study of intergranular damage", MATER HIGH, 18(2), 2001, pp. 71-80
84. Poquillon, D; Chabaud-Reytier, M; Allais, L; Pineau, A
    Modelling creep damage in heat affected zone in 321 stainless steel. Part II: Application to creep crack initiation simulations
    MATERIALS AT HIGH TEMPERATURES
    
    D. Poquillon et al., "Modelling creep damage in heat affected zone in 321 stainless steel. Part II: Application to creep crack initiation simulations", MATER HIGH, 18(2), 2001, pp. 81-90
85. Yen, SK; Hsu, HC
    Nano-crystallization and surface analysis of electrolytic ZrO2 coatings onCo-Cr alloy
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
    
    S.K. Yen e H.C. Hsu, "Nano-crystallization and surface analysis of electrolytic ZrO2 coatings onCo-Cr alloy", J MAT S-M M, 12(6), 2001, pp. 497-501
86. Tusek, J; Markelj, F
    Development of an algorithm for tungsten inert gas welding of an austenitic stainless steel sheet
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    
    J. Tusek e F. Markelj, "Development of an algorithm for tungsten inert gas welding of an austenitic stainless steel sheet", P I MEC E B, 215(8), 2001, pp. 1021-1033
87. Jawaid, A; Olajire, KA; Ezugwu, EO
    Machining of martensitic stainless steel (JETHETE) with coated carbides
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    
    A. Jawaid et al., "Machining of martensitic stainless steel (JETHETE) with coated carbides", P I MEC E B, 215(6), 2001, pp. 769-779
88. Dykes, GA; Mills, J; Bell, RG
    The effect of chilled storage on Listeria monocytogenes cell surface hydrophobicity and attachment to beef muscle
    INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY
    
    G.A. Dykes et al., "The effect of chilled storage on Listeria monocytogenes cell surface hydrophobicity and attachment to beef muscle", INT J FOOD, 36(7), 2001, pp. 783-788
89. Bastidas, JM; Forn, A; Baile, MT; Polo, JL; Torres, CL
    Pitting corrosion of A357 aluminium alloy obtained by semisolid processing
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    
    J.M. Bastidas et al., "Pitting corrosion of A357 aluminium alloy obtained by semisolid processing", MATER CORRO, 52(9), 2001, pp. 691-696
90. Leban, M; Legat, A; Dolecek, V
    Electrochemical noise during non-stationary corrosion processes
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    
    M. Leban et al., "Electrochemical noise during non-stationary corrosion processes", MATER CORRO, 52(6), 2001, pp. 418-425
91. Matsch, S; Bohni, H
    Localized corrosion and electrochemical current noise
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    
    S. Matsch e H. Bohni, "Localized corrosion and electrochemical current noise", MATER CORRO, 52(6), 2001, pp. 430-438
92. Gonzalez-Carrasco, JL; Montealegre, MA; Garcia-Alonso, MC; Chao, J
    Influence of grain size on the oxidation behaviour of MA 956
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    
    J.L. Gonzalez-Carrasco et al., "Influence of grain size on the oxidation behaviour of MA 956", MATER CORRO, 52(11), 2001, pp. 860-864
93. Chen, W; Klein, LC; Huang, C
    Solution preparation of Li(Co, Fe)O-2 coatings for molten carbonate fuel cell components
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
    
    W. Chen et al., "Solution preparation of Li(Co, Fe)O-2 coatings for molten carbonate fuel cell components", J SOL-GEL S, 21(3), 2001, pp. 203-211
94. Lei, YP; Murakawa, H; Shi, YW; Li, XY
    Numerical analysis of the competitive influence of Marangoni flow and evaporation on heat surface temperature and molten pool shape in laser surface remelting
    COMPUTATIONAL MATERIALS SCIENCE
    
    Y.P. Lei et al., "Numerical analysis of the competitive influence of Marangoni flow and evaporation on heat surface temperature and molten pool shape in laser surface remelting", COMP MAT SC, 21(3), 2001, pp. 276-290
95. Louis, B; Reuse, P; Kiwi-Minsker, L; Renken, A
    Synthesis of ZSM-5 coatings on stainless steel grids and their catalytic performance for partial oxidation of benzene by N2O
    APPLIED CATALYSIS A-GENERAL
    
    B. Louis et al., "Synthesis of ZSM-5 coatings on stainless steel grids and their catalytic performance for partial oxidation of benzene by N2O", APP CATAL A, 210(1-2), 2001, pp. 103-109
96. Shang, NG; Zhou, ZF; Lee, CS; Bello, I; Lee, ST
    Effect of ion beam nitriding on diamond nucleation and growth onto steel substrates
    DIAMOND AND RELATED MATERIALS
    
    N.G. Shang et al., "Effect of ion beam nitriding on diamond nucleation and growth onto steel substrates", DIAM RELAT, 10(8), 2001, pp. 1506-1510
97. Borges, CFM; Pfender, E; Heberlein, J
    Influence of nitrided and carbonitrided interlayers on enhanced nucleationof diamond on stainless steel 304
    DIAMOND AND RELATED MATERIALS
    
    C.F.M. Borges et al., "Influence of nitrided and carbonitrided interlayers on enhanced nucleationof diamond on stainless steel 304", DIAM RELAT, 10(11), 2001, pp. 1983-1990
98. Pedrosa, PDS; Teodosio, JR; Tavares, SSM; Neto, JM; da Silva, MR
    Magnetic and mechanical hardening of Fe-based alloys
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    P.D.S. Pedrosa et al., "Magnetic and mechanical hardening of Fe-based alloys", J ALLOY COM, 329(1-2), 2001, pp. L14-L17
99. Paul, A; Elmrabet, S; Odriozola, JA
    Low cost rare earth elements deposition method for enhancing the oxidationresistance at high temperature of Cr2O3 and Al2O3 forming alloys
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    A. Paul et al., "Low cost rare earth elements deposition method for enhancing the oxidationresistance at high temperature of Cr2O3 and Al2O3 forming alloys", J ALLOY COM, 323, 2001, pp. 70-73
100. Barbucci, A; Delucchi, M; Panizza, M; Sacco, M; Cerisola, G
     Electrochemical and corrosion behaviour of cold rolled AISI 301 in 1 M H2SO4
     JOURNAL OF ALLOYS AND COMPOUNDS
     
     A. Barbucci et al., "Electrochemical and corrosion behaviour of cold rolled AISI 301 in 1 M H2SO4", J ALLOY COM, 317, 2001, pp. 607-611