Si mostrano 100 riferimenti a partire da 1 |
Per ulteriori informazioni selezionare i riferimenti di interesse.
Spark plasma sintering of hydroxyapatite powders
BIOMATERIALS
A study of low energy electron attachment to trifluoromethyl sulphur pentafluoride, SF5CF3: atmospheric implications
INTERNATIONAL JOURNAL OF MASS SPECTROMETRY
Investigations of low energy electron attachment to ground state group 6B hexafluorides (SF6, SeF6, and TeF6) using an electron-swarm mass spectrometric technique
INTERNATIONAL JOURNAL OF MASS SPECTROMETRY
Protection of a Ti(3)AI-Nb alloy by electro-spark deposition coating
SCRIPTA MATERIALIA
Simultaneous synthesis and densification of niobium silicide/niobium composites
SCRIPTA MATERIALIA
Predicting the effects of the presence of diluents with methane on spark ignition engine performance
APPLIED THERMAL ENGINEERING
Laser-induced breakdown spectroscopy for soil diagnostics
EUROPEAN JOURNAL OF SOIL SCIENCE
Effect of interface behavior between particles on properties of pure Al powder compacts by spark plasma sintering
MATERIALS TRANSACTIONS
Influence of copper addition to alpha-Fe2Si5 on thermoelectric properties of iron-silicides produced by spark-plasma sintering
MATERIALS TRANSACTIONS
Cylinder pressure-based spark advance control for SI engines
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING
On PD mechanisms at high temperature in voids included in an epoxy resin
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION
Triggering and guiding high-voltage large-scale leader discharges with sub-joule ultrashort laser pulses
PHYSICS OF PLASMAS
Vehicular emissions in roadway tunnels: A critical review
CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY
Simulation of shock waves at high repetition rate of laser sparks
QUANTUM ELECTRONICS
Structures of the plasma channels in a Besselian beam
PLASMA PHYSICS REPORTS
The relationship among AC surface spark-over voltage, specific capacitanceof solid insulator and bubbles in LN2 and LHe
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
Biomass derived producer gas as a reciprocating engine fuel - an experimental analysis
BIOMASS & BIOENERGY
An experimental and analytical examination of the combustion period for gas-fuelled spark ignition engine applications
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY
Implications of kinetically promoted formation of metastable alpha-sialon phases
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Unsteady in-cylinder heat transfer in a spark ignition engine: experimentsand modelling
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Estimation of instantaneous exhaust gas flowrate based on the assumption of a polytropic process
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Effect of synchronized secondary air injection on exhaust hydrocarbon emission in a spark ignition engine
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
An investigation of in-cylinder tumbling motion in a four-valve spark ignition engine
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Fuel losses to the crankcase and hydrocarbon return with recirculated oil and ventilation flow
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Calibration graphs for steels by IR laser ablation inductively coupled plasma atomic emission spectrometry
FRESENIUS JOURNAL OF ANALYTICAL CHEMISTRY
A study on the elimination of micro-cracks in a sparked silicon surface
SENSORS AND ACTUATORS A-PHYSICAL
Luminescence properties of spark-processed GaP
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY
UV and green photoluminescence from spark-processed zinc
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY
Grain size effect on thermoelectric properties of PbTe prepared by spark plasma sintering
MATERIALS TRANSACTIONS JIM
Thermoelectric properties of Mn-doped beta-FeSi2 fabricated by spark plasma sintering
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
Fabrication of dense iron silicides by spark plasma sintering
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
On a new method to assess the accuracy of a CAD program
INTERNATIONAL JOURNAL OF PROSTHODONTICS
Coordinating fuel inventory and electric power generation under uncertainty
IEEE TRANSACTIONS ON POWER SYSTEMS
Rapid in-situ analysis of liquid steel by laser-induced breakdown spectroscopy
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
Spectroscopic characterization of laser induced breakdown in aluminium-lithium alloy samples for quantitative determination of traces
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
The effects of oxygen on the detection of mercury using laser-induced breakdown spectroscopy
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
Efficient solution strategies for building energy system simulation
ENERGY AND BUILDINGS
Determination of major and trace elements in sphalerite using laser ablation double focusing sector field ICP-MS
JOURNAL OF GEOCHEMICAL EXPLORATION
Intravascular pressure regulates local and global Ca2+ signaling in cerebral artery smooth muscle cells
AMERICAN JOURNAL OF PHYSIOLOGY-CELL PHYSIOLOGY
Generation of a zonal model to simulate natural convection in a room with a radiative/convective heater
BUILDING AND ENVIRONMENT
Fabrication of high-permeability ferrite by spark-plasma-sintering method
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
Effects of powder characteristics on electrodischarge machining efficiency
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Chromosomal aberrations in lymphocytes of employees in transformer and generator production exposed to electromagnetic fields and mineral oil
BIOELECTROMAGNETICS
Exotic electricity options and the valuation of electricity generation andtransmission assets
DECISION SUPPORT SYSTEMS
A new ignition model for spark-ignited engine simulations
PARALLEL COMPUTING
Tough multilayered alpha-beta SI3N4 ceramics prepared by spark plasma sintering
MATERIALS LETTERS
Predicting particle emissions from vehicles: modelling issues and an alternative methodology
TRANSPORT REVIEWS
A nonlinear dynamic modelling of SI engines for controller design
INTERNATIONAL JOURNAL OF VEHICLE DESIGN
A model for determination of motor vehicle emission factors from on-road measurements with a focus on submicrometer particles
SCIENCE OF THE TOTAL ENVIRONMENT
Combustion of gasolines in premixed laminar flames European certified and California phase 2 reformulated gasoline
CHEMOSPHERE
Pulsed plasma processing of organic compounds in aqueous solution
THIN SOLID FILMS
Diode-less operation of a resonantly charged repetitive high voltage pulser circuit
REVIEW OF SCIENTIFIC INSTRUMENTS
Reproducibility conditions for the pulsed X-ray emission in a vacuum sparkdischarge
NUKLEONIKA
A mass spectrometry study of n-octane: Electron impact ionization and ion-molecule reactions
JOURNAL OF CHEMICAL PHYSICS
Observation of particle behaviors in the copper powder compact during pulsed electric discharge
JOURNAL OF THE JAPAN INSTITUTE OF METALS
Densification during spark plasma sintering of Ni powder containing dispersed MgO particles
JOURNAL OF THE JAPAN INSTITUTE OF METALS
Isotropic bulk exchange-spring magnets with 134 kJ/m(3) prepared by spark plasma sintering method
IEEE TRANSACTIONS ON MAGNETICS
Triggered switches for high repetition rate commutation of capacitive stores
IEEE TRANSACTIONS ON MAGNETICS
Knock measurement for fuel evaluation in spark ignition engines
FUEL
Turbulent scales in a fan-stirred combustion bomb
COMBUSTION AND FLAME
Spontaneous transient outward currents: modulation by nociceptin in murinedentate gyrus granule cells
BRAIN RESEARCH
Effect of pulse delay time on a pre-ablation dual-pulse LIBS plasma
APPLIED SPECTROSCOPY
Attenuation effects on imaging diagnostics of hollow-cone sprays
APPLIED OPTICS
Modelisation of the dynamic comportment of pots installations
ANNALES DES TELECOMMUNICATIONS-ANNALS OF TELECOMMUNICATIONS
Laser-triggered spark gap for high-energy KrF laser amplifiers
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
Experimental investigation of acoustic scattering and reflection of marinesediments by the high-speed visualization method
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
Experimental study of the pseudospark switches
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
Micro-bending of thin spring by laser forming and spark forming
CIRP ANNALS-MANUFACTURING TECHNOLOGY
Electroluminescence and magnetic field quenching of photoluminescence of spark-processed Si
JOURNAL OF POROUS MATERIALS
Analysis of spark paths in air using three-dimensional image capturing andprocessing
IMAGING SCIENCE JOURNAL
Experimental analysis of the actual behaviour of a natural gas fueled engine Caterpillar (CAT)-3516
APPLIED THERMAL ENGINEERING
Organic acids emissions from natural-gas-fed engines
ATMOSPHERIC ENVIRONMENT
Optical observation of vortex-flame interaction using spark-ignited premixed flames a quasi-turbulent and quiescent wake
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING
Combustion aerosols: Factors governing their size and composition and implications to human health
JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION
Untitled
JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION
Development and preliminary evaluation of a particulate matter emission factor model for European motor vehicles
JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION
Influence of reactive SFx gases on electrode surfaces after electrical discharges under SF6 atmosphere
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION
Effect of dielectric surfaces on the nature of partial discharges
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION
Electric-spark alloying of structural alloys with a composite based on TiCN-AlN
POWDER METALLURGY AND METAL CERAMICS
Structure and properties of TiB2-AlN coatings made by spark and laser methods
POWDER METALLURGY AND METAL CERAMICS
Composition of a non-self-sustained discharge plasma in an N-2 : O-2 : H2Omixture at atmospheric pressure
TECHNICAL PHYSICS
Detonation energy amplification in conical channels
PLASMA PHYSICS REPORTS
High-frequency electropulse deposition of microcrystallized MGH754 ODS alloy coatings
SCIENCE IN CHINA SERIES B-CHEMISTRY
Micro-electrode discharge machining of TiN/Si3N4 composites
BRITISH CERAMIC TRANSACTIONS
Low heating value gas on spark ignition engines
BIOMASS & BIOENERGY
Measurement of the temperature history of unburned gas before knocking in a spark-ignition engine using laser interferometry
MEASUREMENT SCIENCE & TECHNOLOGY
Rapid sintering of nanocrystalline ZrO2(3Y) by spark plasma sintering
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Bending strength and microstructure of Al2O3 ceramics densified by spark plasma sintering
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Fabrication and characterization of SiC rod-particulate-reinforced reaction-bonded Si3N4 composites
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
Numerical simulation of intake and compression flow in a four-valve pent-roof spark ignition engine and validation with LDV data
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
A comparison of the relative effects of fuel composition and ignition energy on the early stages of combustion in a natural gas spark ignition engineusing simulation
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Measurements of cycle resolved air-fuel ratio near the spark plug in a spark ignition engine
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Combustion characteristics and hydrocarbon emissions of a spark ignition engine fuelled with gasoline-oxygenate blends
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Ignition source characteristics for natural-gas-burning vehicle engines
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
Industrial wastes as catalyst precursors: VOC oxidation
APPLIED CATALYSIS B-ENVIRONMENTAL
Optical properties of spark-processed Ge
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY
Novel photoconductive effect in spark-processed silicon with metal contacts
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY
Formation of nanocrystalline Fe-Co powders produced by mechanical alloying
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Nickel-molybdenum catalysts fabricated by mechanical alloying and spark plasma sintering
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING