Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'POLYPROPYLENE' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 4505 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. AKBULUT S; ARASAN S; KALKAN E
      Modification of clayey soils using scrap tire rubber and synthetic fibers

      Applied clay science
    2. Thwe, MM; Liao, K
      Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    3. Nilsson, G; Fernberg, SP; Berglund, LA
      Strain field inhomogeneities and stiffness changes in GMT containing voids

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    4. Xu, ZK; Wang, JL; Shen, LQ; Men, DF; Xu, YY
      Microporous polypropylene hollow fiber membrane - Part I. Surface modification by the graft polymerization of acrylic acid

      JOURNAL OF MEMBRANE SCIENCE
    5. Vladisavljevic, GT; Tesch, S; Schubert, H
      Preparation of water-in-oil emulsions using microporous polypropylene hollow fibers: influence of some operating parameters on droplet size distribution

      CHEMICAL ENGINEERING AND PROCESSING
    6. Vaz, CM; Reis, RL; Cunha, AM
      Use of coupling agents to enhance the interfacial interactions in starch-EVOH/hydroxylapatite composites

      BIOMATERIALS
    7. Tedesco, A; Barbosa, RV; Nachtigall, SMB; Mauler, RS
      Comparative study of PP-MA and PP-GMA as compatibilizing agents on polypropylene/nylon 6 blends

      POLYMER TESTING
    8. Sombatsompop, N; Panaploy, A
      Die geometry effects on the temperature profile measurements of flowing PPmelt in a twin-screw extruder

      POLYMER TESTING
    9. da Silva, ALN; Rocha, MCG; Moraes, MAR; Valente, CAR; Coutinho, FMB
      Mechanical and rheological properties of composites based on polyolefin and mineral additives

      POLYMER TESTING
    10. Valenza, A; Visco, AM; Acierno, D
      Characterization of blends with polyamide 6 and ethylene acrylic acid copolymers at different acrylic acid content

      POLYMER TESTING
    11. Bedia, EL; Murakami, S; Senoo, K; Kohjiya, S
      Structural development and mechanical properties on immiscible and miscible blends from isotactic polypropylene and ethylene-1-hexene copolymers under uniaxial drawing

      POLYMER
    12. Bhat, GS; Malkan, SR
      Extruded continuous filament nonwovens: Advances in scientific aspects

      JOURNAL OF APPLIED POLYMER SCIENCE
    13. Sudduth, RD
      Optimizing the balance between viscosity/modulus and impact in particulatecomposites

      JOURNAL OF APPLIED POLYMER SCIENCE
    14. Xiao, HW; Huang, SQ; Jiang, T; Cheng, SY
      Miscibility of blends of ethylene-propylene-diene terpolymer and polypropylene

      JOURNAL OF APPLIED POLYMER SCIENCE
    15. Naiki, M; Matsumura, T; Matsuda, M
      Tensile elongation of high-fluid polypropylene/ethylene-propylene rubber blends: Dependence on molecular weight of the components and propylene content of the rubber

      JOURNAL OF APPLIED POLYMER SCIENCE
    16. Zhu, S; Zhang, Y; Zhang, YX
      Effects of silicone oil and polymeric modifiers on the mechanical properties of highly filled LLDPE

      JOURNAL OF APPLIED POLYMER SCIENCE
    17. Jang, GS; Jo, NJ; Cho, WJ; Ha, CS
      Isothermal crystallization behavior and properties of polypropylene/EPR blends nucleated with sodium benzoate

      JOURNAL OF APPLIED POLYMER SCIENCE
    18. Zhang, XF; Xie, F; Pen, ZL; Zhang, Y; Zhang, YX; Zhou, W
      Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

      EUROPEAN POLYMER JOURNAL
    19. Poitou, A; Ammar, A
      Flow induced crystalization of a thermoplastic

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    20. Molander, P; Greibrokk, T; Iveland, A; Ommundsen, E
      Simultaneous dual-mechanism separation of a semicrystalline polymer blend on large-pore silica by temperature-programmed packed capillary liquid chromatography

      JOURNAL OF SEPARATION SCIENCE
    21. Clancy, TC; Jang, JH; Dhinojwala, A; Mattice, WL
      Orientation of phenyl rings and methylene bisectors at the free surface ofatactic polystyrene

      JOURNAL OF PHYSICAL CHEMISTRY B
    22. Godfrey, SP; Badyal, JPS; Little, IR
      Plasmachemical dehydroxylation of high surface area silica at room temperature

      JOURNAL OF PHYSICAL CHEMISTRY B
    23. Mercurio, DJ; Spontak, RJ
      Morphological characteristics of 1,3 : 2,4-dibenzylidene sorbitol/poly(propylene glycol) organogels

      JOURNAL OF PHYSICAL CHEMISTRY B
    24. Wang, Q; Liu, CS; Chen, YH
      Studies on PA6-PP-wollastonite composite compatibilised by PP-graft-maleicanhydride prepared via pan milling

      PLASTICS RUBBER AND COMPOSITES
    25. Zebarjad, SM; Bagheri, R; Lazzeri, A
      Hybrid PP-EPR-GF composites Part 1 - Deformation mechanisms

      PLASTICS RUBBER AND COMPOSITES
    26. Goutianos, S; Peijs, T
      Experimental and numerical investigation into fatigue damage mechanisms inmultifibre microcomposites

      PLASTICS RUBBER AND COMPOSITES
    27. Turton, TJ; White, JR
      Degradation depth profiles and fracture of UV exposed polycarbonate

      PLASTICS RUBBER AND COMPOSITES
    28. Rabello, MS; Tocchetto, RS; Barros, LA; D'Almeida, JRM; White, JR
      Weathering of polypropylene composites containing weldlines

      PLASTICS RUBBER AND COMPOSITES
    29. Pinter, G; Lang, RW
      Fracture mechanics characterisation of effects of stabilisers on creep crack growth in polyethylene pipes

      PLASTICS RUBBER AND COMPOSITES
    30. Hamza, AA; Sokkar, TZN; El-Bakary, MA
      Determining the optical properties of highly oriented fibres using a multiple-beam technique

      JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS
    31. Van de Velde, K; Kiekens, P
      Influence of fibre and matrix modifications on mechanical and physical properties of flax fibre reinforced poly(propylene)

      MACROMOLECULAR MATERIALS AND ENGINEERING
    32. Krulis, Z; Kokta, BV; Horak, Z; Michalkova, D; Fortelny, I
      Compatibilization as a procedure for recycling of commingled polyolefin waste

      MACROMOLECULAR MATERIALS AND ENGINEERING
    33. Hong, SG; Ho, CA
      The adhesion properties of a plasma modified thermoplastic olefin elastomer

      MACROMOLECULAR MATERIALS AND ENGINEERING
    34. Saujanya, C; Radhakrishnan, S
      Development of a transcrystalline phase in poly(propylene) at the PET interface

      MACROMOLECULAR MATERIALS AND ENGINEERING
    35. Korenkov, M; Paul, A; Sauerland, S; Neugebauer, E; Arndt, M; Chevrel, JP; Corcione, F; Fingerhut, A; Flament, JB; Kux, M; Matzinger, A; Myrvold, HE; Rath, AM; Simmermacher, RKJ
      Classification and surgical treatment of incisional hernia - Results of anexperts' meeting

      LANGENBECKS ARCHIVES OF SURGERY
    36. Zaharescu, T
      Oxygen uptake: A procedure for evaluating oxidative stability and performances of polymers

      MATERIALS RESEARCH INNOVATIONS
    37. Reis, RL; Cunha, AM; Oliveira, MJ; Campos, AR; Bevis, MJ
      Relationship between processing and mechanical properties of injection molded high molecular mass polyethylene plus hydroxyapatite composites

      MATERIALS RESEARCH INNOVATIONS
    38. Albano, C; Ichazo, M; Gonzalez, J; Delgado, M; Poleo, R
      Effects of filler treatments on the mechanical and morphological behavior of PP plus wood flour and PP plus sisal fiber

      MATERIALS RESEARCH INNOVATIONS
    39. Reyes, J; Albano, C; Davidson, E; Poleo, R; Gonzalez, J; Ichazo, M; Chipara, M
      Effects of gamma irradiation on polypropylene, polypropylene plus high density polyethylene and polypropylene plus high density polyethylene plus wood flour

      MATERIALS RESEARCH INNOVATIONS
    40. Sciamanna, R; Arribas, G; Albano, C; Horie, E; Soto, B
      Effect of different copolymers (hydrogenated and non-hydrogenated, with different molecular weights and different content of styrene] in the compatibilization of PS+PP(80+20) polyblend

      MATERIALS RESEARCH INNOVATIONS
    41. Lee, BJ; McDonald, AG; James, B
      Influence of fiber length on the mechanical properties of wood-fiber/polypropylene prepreg sheets

      MATERIALS RESEARCH INNOVATIONS
    42. Park, J; Eom, K; Kwon, O; Woo, S
      Chemical etching technique for the investigation of melt-crystallized isotactic polypropylene spherulite and lamellar morphology by scanning electronmicroscopy

      MICROSCOPY AND MICROANALYSIS
    43. Jung, WD; Morikawa, J; Hashimoto, T
      Thermophysical properties of poly(propylene)-based composite polymer

      JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
    44. Woo, L; Khare, AR; Sandford, CL; Ling, MTK; Ding, SY
      Relevance of high temperature oxidative stability testing to long term polymer durability

      JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
    45. Ozawa, T
      Temperature control modes in thermal analysis

      JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
    46. Ling, L; Habicher, WD
      Synthesis and polymerization of new (meth)acrylamides bearing a hindered piperidine and a hydroxyl group

      DESIGNED MONOMERS AND POLYMERS
    47. Huang, H; Zhu, CY; Zhou, ZF; Liu, NC
      Melt grafting of a long-chain unsaturated carboxylic acid onto polypropylene

      REACTIVE & FUNCTIONAL POLYMERS
    48. Schmidt, R; Deppner, M; Alt, HG
      Synthesis and characterization of unbridged metallocene dichloride complexes with two differently mono-substituted indenyl ligands and their application as catalysts for the polymerization of ethene and propene

      JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
    49. Lin, YH; Hwu, WH; Ger, MD; Yeh, TF; Dwyer, J
      A combined kinetic and mechanistic modelling of the catalytic degradation of polymers

      JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
    50. Li, ZG; Narh, KA
      Experimental determination and numerical prediction of mechanical properties of injection molded self-reinforcing polymer composites

      COMPOSITES PART B-ENGINEERING
    51. Balasuriya, PW; Ye, L; Mai, YW
      Mechanical properties of wood flake-polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviour

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    52. Mader, E; Moos, E; Karger-Kocsis, J
      Role of film formers in glass fibre reinforced polypropylene - new insights and relation to mechanical properties

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    53. Voros, G; Pukanszky, B
      Effect of a soft interlayer with changing properties on the stress distribution around inclusions and yielding of composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    54. Chiang, WY; Hu, CH
      Approaches of interfacial modification for flame retardant polymeric materials

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    55. Zafeiropoulos, NE; Baillie, CA; Matthews, FL
      A study of transcrystallinity and its effect on the interface in flax fibre reinforced composite materials

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    56. Thomason, JL; Kalinka, G
      A technique for the measurement of reinforcement fibre tensile strength atsub-millimetre gauge lengths

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    57. Couto, SR; Ratto, M; Dominguez, A; Sanroman, A
      Strategies for improving ligninolytic enzyme activities in semi-solid-state bioreactors

      PROCESS BIOCHEMISTRY
    58. Mishra, R; Tripathy, SP; Dwivedi, KK; Khathing, DT; Ghosh, S; Muller, M; Fink, D
      Electron induced modification in polypropylene

      RADIATION MEASUREMENTS
    59. Tordjeman, P; Robert, C; Marin, G; Gerard, P
      The effect of alpha, beta crystalline structure on the mechanical properties of polypropylene

      EUROPEAN PHYSICAL JOURNAL E
    60. Papakonstantinou, DD; Mataras, D; Arefi-Khonsari, F
      Treatment of polyethylene terephthalate in a He glow discharge

      JOURNAL DE PHYSIQUE IV
    61. Bellon, JM; Garcia-Honduvilla, N; Jurado, F; Garcia-Carranza, A; Garcia-Moreno, F; Carrera-San Martin, A; Bujan, J
      Use of composite prostheses in the repair of defects in the abdominal wall: Prosthetic behaviour at the peritoneum

      EUROPEAN JOURNAL OF SURGERY
    62. Petersen, S; Henke, G; Freitag, M; Faulhaber, A; Ludwig, K
      Deep prosthesis infection in incisional hernia repair: Predictive factors and clinical outcome

      EUROPEAN JOURNAL OF SURGERY
    63. Zaggout, FR; Al Mughari, AR; Garforth, A
      Catalytic degradation of High Density Polyethylene using zeolites

      JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING
    64. Nyden, MR; Vanderhart, DL; Alamo, RG
      The conformational structures of defect-containing chains in the crystalline regions of isotactic polypropylene

      COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE
    65. Cangelosi, F; Davis, L; Samuels, SB
      New generation of long-term stabilizers for polyolefins

      JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
    66. Habicher, WD; Pawelke, B; Bauer, I; Yamaguchi, K; Kosa, C; Chmela, S; Pospisil, J
      Synthesis and antioxidative properties of novel multifunctional stabilizers

      JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
    67. Nassr, S; Brunet, M; Lavoie, P; Brazier, JL
      HPLC-DAD method for studying the stability of solutions containing morphine, dexamethasone, haloperidol, midazolam, famotidine, metoclopramide, and dimenhydrinate

      JOURNAL OF LIQUID CHROMATOGRAPHY & RELATED TECHNOLOGIES
    68. Sathiakumar, N; Delzell, E; Rodu, B; Beall, C; Myers, S
      Cancer incidence among employees at a petrochemical research facility

      JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL MEDICINE
    69. Beall, C; Delzell, E; Rodu, B; Sathiakumar, N; Myers, S
      Cancer and benign tumor incidence among employees in a polymers research complex

      JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL MEDICINE
    70. Grubb, DG; Diesing, WE; Cheng, SCJ; Sabanas, RM
      Comparison of the durability of geotextiles in an alkaline mine tailings environment

      GEOSYNTHETICS INTERNATIONAL
    71. Teyssedre, G; Laurent, C; Aslanides, A; Quirke, N; Dissado, LA; Montanari, GC; Campus, A; Martinotto, L
      Deep trapping centers in crosslinked polyethylene investigated by molecular modeling and luminescence techniques

      IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION
    72. Champion, JV; Dodd, SJ; Zhao, Y; Vaughan, AS; Brown, M; Davies, AE; Sutton, SJ; Swingler, SG
      Morphology and the growth of electrical trees in a propylene/ethylene copolymer

      IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION
    73. Krivoguz, YM; Yuvchenko, AP; Zvereva, TD; Pesetskii, SS
      Grafting of methylenebutanedioic acid to low-density polyethylene in the course of reactive extrusion, initiated with carborane-containing peroxides

      RUSSIAN JOURNAL OF APPLIED CHEMISTRY
    74. Patil, AV; Jain, RC; Vora, RA
      Synthesis and characterization of graft copolymers of acrylic acid onto poly vinyl chloride using di-(2-phenoxy ethyl) peroxy dicarbonate initiator

      JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY
    75. Naumowicz, M; Wencel, A; Figaszewski, Z
      Application of alkylated crown ether derivative in modifying selectivity of polypropylene membranes

      JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY
    76. Ling, L; Habicher, WD
      Synthesis and polymerization of new methacryloyl ureas carrying a hinderedpiperidine and a hydroxyl group

      JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY
    77. Zhou, W; Mark, JE; Unroe, MR; Arnold, FE
      Some clay nanocomposites based on a high-temperature, high-performance polymer

      JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY
    78. Novak, I; Chodak, I
      Adhesive behavior of UV sensitizer modified low-density polyethylene

      JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY
    79. Marcincin, A; Jurcisinova, Z; Borsig, E; Kristofic, M; Marcincinova, T
      Fiber-forming blend polypropylene-polyvinyl alcohol

      POLYMERS FOR ADVANCED TECHNOLOGIES
    80. Tall, S; Albertsson, AC; Karlsson, S
      Enhanced rigidity of recycled polypropylene from packaging waste by compounding with talc and high-crystallinity polypropylene

      POLYMERS FOR ADVANCED TECHNOLOGIES
    81. Tripathy, SP; Mishra, R; Khathing, DT; Kulshrestha, A; Dwivedi, KK; Srivastava, A; Ghosh, S; Fink, D
      Optical absorption studies in heavy ion irradiated polymers

      RADIATION EFFECTS AND DEFECTS IN SOLIDS
    82. Koller, G; Aris, MJ; Ujang, Z; Vaidya, AM
      Dependence of the synthetic activity of nine immobilized lipases on water activity

      BIOCATALYSIS AND BIOTRANSFORMATION
    83. Upadhyay, RD; Kale, DD
      Rheological and optical properties of polypropylene filled with synthetic silicates and calcium carbonate

      JOURNAL OF POLYMER RESEARCH-TAIWAN
    84. De Rosa, C; Auriemma, F
      Crystal structures and order-disorder phenomena in polymers

      MACROMOLECULAR SYMPOSIA
    85. Chadwick, JC
      Advances in propene polymerization using MgCl2-supported catalysts. Fundamental aspects and the role of electron donors

      MACROMOLECULAR SYMPOSIA
    86. McKenna, T; Mattioli, V
      Progress in describing particle growth for polyolefins: A look at particlemorphology

      MACROMOLECULAR SYMPOSIA
    87. Olcak, D; Fricova, O; Sevcovic, L
      Study of beta relaxation in polypropylene fibres modified by several techniques

      MACROMOLECULAR SYMPOSIA
    88. Arroyo, MR; Bell, ML
      Optimization of aramid powder reinforced PP/EPDM blends

      MACROMOLECULAR SYMPOSIA
    89. Bualek-Limcharoen, S; Saengsuwan, S; Amornsakchai, T; Wanno, B
      Rheology, morphology and tensile properties of thermotropic liquid crystalline polymer/polypropylene in-situ composites

      MACROMOLECULAR SYMPOSIA
    90. Omastova, M; Prokes, J; Podhradska, S; Chodak, I
      Stability of electrical and mechanical properties of polyethylene/carbon black composites

      MACROMOLECULAR SYMPOSIA
    91. Nitta, K
      Structural factors controlling tensile yield deformation of semi-crystalline polymers

      MACROMOLECULAR SYMPOSIA
    92. Novak, I; Chodak, I
      Adhesive behavior of UV pre-treated polyolefins

      MACROMOLECULAR SYMPOSIA
    93. Nezbedova, E; Pospisil, V; Bohaty, P; Vlach, B
      Fracture behaviour of beta-polypropylene as a function of processing conditions

      MACROMOLECULAR SYMPOSIA
    94. Desai, SM; Pandey, JK; Singh, RP
      A novel photoadditive for polyolefin photostabilization: Hindered amine light stabilizer

      MACROMOLECULAR SYMPOSIA
    95. Rodriguez-Perez, MA; Vasiliev, T; Dobreva-Veleva, A; de Saja, JA; Gutzow, I; Velasco, JI
      The activity of inorganic substrates in the catalysed nucleation of different polymer melts

      MACROMOLECULAR SYMPOSIA
    96. Nugay, N; Erman, B
      Hybrid reinforcement in nitrile rubber composites

      MACROMOLECULAR SYMPOSIA
    97. Verdu, J
      Ageing of filled polymers

      MACROMOLECULAR SYMPOSIA
    98. Merino, JC; Fernandez, MD; Pastor, JM
      Raman microspectroscopy of polymeric materials

      MACROMOLECULAR SYMPOSIA
    99. Poux, S; Thierry, A; Fazel, N; Dahoun, A; Guenet, JM
      Encapsulation of a self-assembling bicopper complex in polymer nanowires

      MACROMOLECULAR SYMPOSIA
    100. Thierry, A; Mathieu, C; Straupe, C; Wittmann, JC; Lotz, B
      Polymer and organic molecules ordered via epitaxy: Geometrical and molecular interactions

      MACROMOLECULAR SYMPOSIA


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 29/02/20 alle ore 08:41:52