Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'POLYMER MELTS' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 572 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Doruker, P
      Simulation of polyethylene thin films composed of various chain lengths

      POLYMER
    2. Faller, R; Muller-Plathe, F
      Modeling of poly(isoprene) melts on different scales

      POLYMER
    3. Ruths, M; Sukhishvili, SA; Granick, S
      Static and dynamic forces between adsorbed polyelectrolyte layers (quaternized poly-4-vinylpyridine)

      JOURNAL OF PHYSICAL CHEMISTRY B
    4. Joseph, R; Martyn, MT; Tanner, KE; Coates, PD; Bonfield, W
      Rheological characterisation of hydroxyapatite filled polyethylene composites Part 1 - Shear and extensional behaviour

      PLASTICS RUBBER AND COMPOSITES
    5. Ehret, P; Bauget, F
      Observation of Kaneta's dimples in elastohydrodynamic lubrication contacts

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
    6. Hess, S; Kroger, M
      Thermophysical properties of gases, liquids, and solids composed of particles interacting with a short-range attractive potential - art. no. 011201

      PHYSICAL REVIEW E
    7. Choi, J; Kato, T
      Static and dynamic behavior of liquid nano-meniscus bridge (c)

      TRIBOLOGY TRANSACTIONS
    8. He, G; Robbins, MO
      Simulations of the kinetic friction due to adsorbed surface layers

      TRIBOLOGY LETTERS
    9. Wang, BQ; Cai, J; Liu, HL; Hu, Y
      Monte Carlo simulations of density profiles for hard-sphere chain fluids confined between surfaces

      CHINESE JOURNAL OF CHEMICAL ENGINEERING
    10. Godovsky, YK; Magonov, SN
      Visualization of the morphology of ultrathin polyethylene layers and its variations over a wide temperature range by hot-stage atomic force microscopy

      POLYMER SCIENCE SERIES A
    11. White, JL; Choi, CH
      Modeling heat transfer with crystallization in rods and filaments

      INTERNATIONAL POLYMER PROCESSING
    12. Larena, A; Villar, MA
      Optical properties of CaCO3-filled poly(ethylene-co-vinyl acetate) films

      OPTICAL MATERIALS
    13. Kharchenko, SB; Kannan, RM; Cernohous, JJ; Venkataramani, S; Babu, GN
      Unusual contributions of molecular architecture to rheology and flow birefringence in hyperbranched polystyrene melts

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    14. Yamaguchi, M; Suzuki, K
      Rheological properties and foam processability for blends of linear and crosslinked polyethylenes

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    15. Chen, H; Li, JCM
      Impression creep of a viscous layer

      JOURNAL OF MATERIALS RESEARCH
    16. Gedat, E; Schreiber, A; Findenegg, GH; Shenderovich, I; Limbach, HH; Buntkowsky, G
      Stray field gradient NMR reveals effects of hydrogen bonding on diffusion coefficients of pyridine in mesoporous silica

      MAGNETIC RESONANCE IN CHEMISTRY
    17. Debbaut, B
      Non-isothermal and viscoelastic effects in the squeeze flow between infinite plates

      JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
    18. Mitsoulis, E
      Numerical simulation of entry flow of the IUPAC-LDPE melt

      JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
    19. Muke, S; Ivanov, I; Kao, N; Bhattacharya, SN
      Extensional rheology of polypropylene melts from the Rheotens test

      JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
    20. Ekiner, OM; Vassilatos, G
      Polyaramide hollow fibers for H-2/CH4 separation - II. Spinning and properties

      JOURNAL OF MEMBRANE SCIENCE
    21. Shimizu, RN; Demarquette, NR
      Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal

      LIQUID CRYSTALS
    22. Sombatsompop, N; Dangtungee, R
      Effect of die design on flow visualization and die swell of NR in a capillary rheometer

      JOURNAL OF MATERIALS SCIENCE LETTERS
    23. Lamberti, G; Titomanlio, G
      Crystallization kinetics of iPP. Model and experiments

      POLYMER BULLETIN
    24. Ostrovsky, B; Crooks, G; Smith, MA; Bar-Yam, Y
      Cellular automata for polymer simulation with application to polymer meltsand polymer collapse including implications for protein folding

      PARALLEL COMPUTING
    25. He, G; Robbins, MO
      Simulations of the static friction due to adsorbed molecules - art. no. 035413

      PHYSICAL REVIEW B
    26. Lee, K; Mackley, MR; McLeish, TCB; Nicholson, TM; Harlen, OG
      Experimental observation and numerical simulation of transient "stress fangs" within flowing molten polyethylene

      JOURNAL OF RHEOLOGY
    27. van Dusschoten, D; Wilhelm, M; Spiess, HW
      Two-dimensional Fourier transform rheology

      JOURNAL OF RHEOLOGY
    28. Kim, S; Dealy, JM
      Design of an orifice die to measure entrance pressure drop

      JOURNAL OF RHEOLOGY
    29. Ramazani, A; Ait-Kadi, A; Grmela, M
      Rheology of fiber suspensions in viscoelastic media: Experiments and modelpredictions

      JOURNAL OF RHEOLOGY
    30. Milner, ST; McLeish, TCB; Likhtman, AE
      Microscopic theory of convective constraint release

      JOURNAL OF RHEOLOGY
    31. Liang, RF; Mackley, MR
      The gas-assisted extrusion of molten polyethylene

      JOURNAL OF RHEOLOGY
    32. Perez-Trejo, L; Perez-Gonzalez, J; de Vargas, L
      About the determination of the steady state flow for polymer melts in capillary rheometers

      POLYMER TESTING
    33. Sombatsompop, N; Rungrattawachai, P; Bouvaree, N; Eaksrisakul, K
      Effect of mastication time on flow patterns of natural rubber in the barrel of a capillary rheometer

      POLYMER TESTING
    34. Sombatsompop, N; Intawong, NT
      Flow properties and entrance corrections of polymer melts by a mobile barrel capillary rheometer

      POLYMER TESTING
    35. Gahleitner, M
      Melt rheology of polyolefins

      PROGRESS IN POLYMER SCIENCE
    36. Denn, MM
      Extrusion instabilities and wall slip

      ANNUAL REVIEW OF FLUID MECHANICS
    37. Pokrovskii, VN
      The mesoscopic theory of the slow relaxation of linear macromolecules

      POLYMER PHYSICS AND ENGINEERING
    38. Schulze, JS; Lodge, TP; Macosko, CW; Hepperle, J; Munstedt, H; Bastian, H; Ferri, D; Groves, DJ; Kim, YH; Lyon, M; Schweizer, T; Virkler, T; Wassner, E; Zoetelief, W
      A comparison of extensional viscosity measurements from various RME rheometers

      RHEOLOGICA ACTA
    39. Rodic, M; Hrymak, AN
      The modified imbedded disc retraction method for measurement of interfacial tension in polymer melts

      RHEOLOGICA ACTA
    40. Munstedt, H; Schwetz, M; Heindl, M; Schmidt, M
      Influence of molecular structure on secondary flow of polyolefin melts as investigated by laser-Doppler velocimetry

      RHEOLOGICA ACTA
    41. Qian, LM; Luengo, G; Douillet, D; Charlot, M; Dollat, X; Perez, E
      New two-dimensional friction force apparatus design for measuring shear forces at the nanometer scale

      REVIEW OF SCIENTIFIC INSTRUMENTS
    42. Sombatsompop, N; Patcharaphun, S
      A new experimental method for determining simultaneously true radial temperature profiles of polymer melts under isothermal capillary flow

      POLYMER JOURNAL
    43. Japon, S; Luciani, A; Nguyen, QT; Leterrier, Y; Manson, JAE
      Molecular characterization and rheological properties of modified poly(ethylene terephthalate) obtained by reactive extrusion

      POLYMER ENGINEERING AND SCIENCE
    44. Zhou, GW; Willett, JL; Carriere, CJ
      Effect of starch content on viscosity of starch-filled poly(hydroxy ester ether) composites

      POLYMER ENGINEERING AND SCIENCE
    45. Boyaud, MF; Cassagnau, P; Michel, A; Bousmina, M; Ait-Kadi, A
      Transient elongational properties of an in situ generated polymer/polymer composite

      POLYMER ENGINEERING AND SCIENCE
    46. Lee, JK; Virkler, TL; Scott, CE
      Effects of rheological properties and processing parameters on ABS thermoforming

      POLYMER ENGINEERING AND SCIENCE
    47. Shiraishi, Y; Narazaki, N; Kikutani, T
      The application of an integral type constitutive equation to numerical flow analyses of viscoelastic fluid in unsteady flow

      POLYMER ENGINEERING AND SCIENCE
    48. Lee, JK; Virkler, TL; Scott, CE
      Influence of initial sheet temperature an ABS thermoforming

      POLYMER ENGINEERING AND SCIENCE
    49. Tai, HJ
      Molecular structural evolution in crosslinking low density polyethylene-trimethylolpropane trimethacrylate systems

      POLYMER ENGINEERING AND SCIENCE
    50. Kotaka, T; Okamoto, M; Kojima, A; Kwon, YK; Nojima, S
      Elongational flow-induced morphology change of block copolymers. 2. A polystyrene-block-poly(ethylene butylene)-block-polystyrene triblock copolymer with cylindrical microdomains

      POLYMER
    51. Lagendijk, RP; Hogt, AH; Buijtenhuijs, A; Gotsis, AD
      Peroxydicarbonate modification of polypropylene and extensional flow properties

      POLYMER
    52. Maiti, P; Okamoto, M; Kotaka, T
      Flow birefringence and strain-induced hardening of cycloolefin copolymers under elongational flow

      POLYMER
    53. Yamaguchi, M; Takahashi, M
      Rheological properties of low-density polyethylenes produced by tubular and vessel processes

      POLYMER
    54. Wu, J; Schultz, JM; Samon, JM; Pangelinan, AB; Chuah, HH
      In situ study of structure development during continuous hot-drawing of poly(trimethylene terephthalate) fibers by simultaneous synchrotron small- and wide-angle X-ray scattering

      POLYMER
    55. Holmqvist, P; Castelletto, V; Hamley, IW; Hermsdorf, N; Almdal, K
      Stress relaxation experiments on a lamellar polystyrene-polyisoprene diblock copolymer melt

      POLYMER
    56. Son, Y; Yoon, JT
      Measurement of interfacial tension by a deformed drop retraction method

      POLYMER
    57. Read, DJ; McLeish, TCB
      Molecular rheology and statistics of long chain branched metallocene-catalyzed polyolefins

      MACROMOLECULES
    58. Faller, R; Muller-Plathe, F; Doxastakis, M; Theodorou, D
      Local structure and dynamics of trans-polyisoprene oligomers

      MACROMOLECULES
    59. Galgali, G; Ramesh, C; Lele, A
      A rheological study on the kinetics of hybrid formation in polypropylene nanocomposites

      MACROMOLECULES
    60. Pu, Y; White, H; Rafailovich, MH; Sokolov, J; Patel, A; White, C; Wu, WL; Zaitsev, V; Schwarz, SA
      Probe diffusion in thin PS free-standing films

      MACROMOLECULES
    61. Ye, XN; Sridhar, T
      Shear and extensional properties of three-arm polystyrene solutions

      MACROMOLECULES
    62. Islam, MT; Juliani; Archer, LA; Varshney, SK
      Linear rheology of entangled six-arm and eight-arm polybutadienes

      MACROMOLECULES
    63. Sugimoto, M; Masubuchi, Y; Takimoto, J; Koyama, K
      Melt rheology of polypropylene containing small amounts of high-molecular-weight chain. 2. Uniaxial and biaxial extensional flow

      MACROMOLECULES
    64. Mergell, B; Everaers, R
      Tube models for rubber-elastic systems

      MACROMOLECULES
    65. Tsenoglou, CJ; Gotsis, AD
      Rheological characterization of long chain branching in a melt of evolvingmolecular architecture

      MACROMOLECULES
    66. Wasiak, A
      Studies of kinetics of nonisothermal crystallization of i-polypropylene bywide-angle and small-angle scattering of X-ray synchrotron radiation

      JOURNAL OF MACROMOLECULAR SCIENCE-PHYSICS
    67. Masubuchi, Y; Takimoto, JI; Koyama, K; Ianniruberto, G; Marrucci, G; Greco, F
      Brownian simulations of a network of reptating primitive chains

      JOURNAL OF CHEMICAL PHYSICS
    68. Blas, FJ; Vega, LF
      Thermodynamic properties and phase equilibria of branched chain fluids using first- and second-order Wertheim's thermodynamic perturbation theory

      JOURNAL OF CHEMICAL PHYSICS
    69. Demirel, AL; Granick, S
      Origins of solidification when a simple molecular fluid is confined between two plates

      JOURNAL OF CHEMICAL PHYSICS
    70. Jaffer, KM; Opps, SB; Sullivan, DE; Nickel, BG; Mederos, L
      The nematic-isotropic phase transition in semiflexible fused hard-sphere chain fluids

      JOURNAL OF CHEMICAL PHYSICS
    71. Padding, JT; Briels, WJ
      Zero-shear stress relaxation and long time dynamics of a linear polyethylene melt: A test of Rouse theory

      JOURNAL OF CHEMICAL PHYSICS
    72. Favrin, G; Irback, A; Sjunnesson, F
      Monte Carlo update for chain molecules: Biased Gaussian steps in torsionalspace

      JOURNAL OF CHEMICAL PHYSICS
    73. Khare, R; de Pablo, J; Yethiraj, A
      Molecular simulation and continuum mechanics investigation of viscoelasticproperties of fluids confined to molecularly thin films

      JOURNAL OF CHEMICAL PHYSICS
    74. Sombatsompop, N; Tangsongcharoen, A
      Effects of glass-fiber content and coolant temperature on temperature and crystallinity profiles of PP melt during cooling

      JOURNAL OF APPLIED POLYMER SCIENCE
    75. Moreira, JC; Demarquette, NR
      Influence of temperature, molecular weight, and molecular weight dispersity on the surface tension of PS, PP, and PE. I. Experimental

      JOURNAL OF APPLIED POLYMER SCIENCE
    76. Sombatsompop, N; Dangtungee, R
      Flow visualization and extrudate swell of natural rubber in a capillary rheometer: Effect of die/barrel system

      JOURNAL OF APPLIED POLYMER SCIENCE
    77. Pantani, R; Titomanlio, G
      Description of PVT behavior of an industrial polypropylene-EPR copolymer in process conditions

      JOURNAL OF APPLIED POLYMER SCIENCE
    78. Dufrancatel-Veiller, L; Lacrampe, MF; Pabiot, J
      Die swell of thermoplastic polyurethanes: A peculiar behavior

      JOURNAL OF APPLIED POLYMER SCIENCE
    79. Seyfzadeh, B; Collier, JR
      Elongational rheology of polyethylene melts

      JOURNAL OF APPLIED POLYMER SCIENCE
    80. Manghi, M; Aubouy, M
      Interplay of entropic and enthalpic contributions to the surface tension of polymer melts

      ADVANCES IN COLLOID AND INTERFACE SCIENCE
    81. Kumar, SK; Jones, RL
      Dominance of density variations in determining the molecular weight dependence of surface tensions of polymer melts

      ADVANCES IN COLLOID AND INTERFACE SCIENCE
    82. Irzhak, VI
      Dynamics of macromolecules: Entanglement network versus physical bond network

      POLYMER SCIENCE SERIES B
    83. Ghatak, A; Vorvolakos, K; She, HQ; Malotky, DL; Chaudhury, MK
      Interfacial rate processes in adhesion and friction

      JOURNAL OF PHYSICAL CHEMISTRY B
    84. Martyn, MT; Groves, DJ; Coates, PD
      In process measurement of apparent extensional viscosity of low density polyethylene melts using flow visualisation

      PLASTICS RUBBER AND COMPOSITES
    85. Hamada, T
      Rotational isomeric state study of molecular dimensions and elasticity of perfluoropolyethers: Differences between Demnum-, Fomblin-, and Krytox-typemain chains

      PCCP PHYSICAL CHEMISTRY CHEMICAL PHYSICS
    86. Gleim, T; Kob, W
      The beta-relaxation dynamics of a simple liquid

      EUROPEAN PHYSICAL JOURNAL B
    87. Sombatsompop, N; Chaiwattanpipat, W; Panapoy, M
      Melt temperature variations in the barrels of an injection moulder and a twin screw extruder

      MATERIALS RESEARCH INNOVATIONS
    88. Ozisik, R; Doruker, P; Mattice, WL; von Meerwall, ED
      Translational diffusion in Monte Carlo simulations of polymer melts: center of mass displacement vs. integrated velocity autocorrelation function

      COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE
    89. Aoyagi, T; Doi, M
      Molecular dynamics simulation of entangled polymers in shear flow

      COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE
    90. Mavrantzas, VG; Theodorou, DN
      Atomistic simulation of the birefringence of uniaxially stretched polyethylene melts

      COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE
    91. Leon, S; Aleman, C; Munoz-Guerra, S; Laso, M
      Monte Carlo structural investigation of helical poly(beta-L-aspartate)s containing linear alkyl side chains

      COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE
    92. Brun, Y; Gorenstein, M; Hay, N
      New approach to model fitting in multi-detector GPC

      JOURNAL OF LIQUID CHROMATOGRAPHY & RELATED TECHNOLOGIES
    93. Santamaria, A; Vega, JF; Munoz-Escalona, A; Lafuente, P
      Rheology of metallocene catalysed polyethylenes: Energy consumption perspective

      MACROMOLECULAR SYMPOSIA
    94. Lim, YT; Park, OO
      Rheological evidence for the microstructure of intercalated polymer/layered silicate nanocomposites

      MACROMOLECULAR RAPID COMMUNICATIONS
    95. Su, FH; Shyu, SS; Chen, YC
      NMR properties of poly(dimethyl siloxane) colloids as new contrast agents for NMR imaging

      POLYMER INTERNATIONAL
    96. Micic, P; Bhattacharya, SN
      Rheology of LLDPE, LDPE and LLDPE/LDPE blends and its relevance to the film blowing process

      POLYMER INTERNATIONAL
    97. Yamamoto, R; Onuki, A
      Dynamics of highly supercooled liquids far from equilibrium

      JOURNAL OF PHYSICS-CONDENSED MATTER
    98. Kelly, AL; Woodhead, M; Coates, PD; Barnwell, D; Martin, K
      In-process rheometry studies of LDPE compounds - Part II: Magnesium hydroxide filled

      INTERNATIONAL POLYMER PROCESSING
    99. Bernnat, A; Wagner, MH; Chai, CK
      Assessment of LDPE melt strength by use of rheotens mastercurves

      INTERNATIONAL POLYMER PROCESSING
    100. Wang, S; Makinouchi, A; Okamoto, M; Kotaka, T; Maeshima, M; Ibe, N; Nakagawa, T
      Viscoplastic material modeling for the stretch blow molding simulation

      INTERNATIONAL POLYMER PROCESSING


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 25/01/21 alle ore 15:59:37