Si mostrano 100 riferimenti a partire da 1 |

Per ulteriori informazioni selezionare i riferimenti di interesse.

- Cobas, R; Batista-Leyva, AJ; Garcia, S; Altshuler, E

Relaxation of the transport critical current in deoxygenated YBa2Cu3O7-delta*PHYSICA C*

- Brenner, R; Castelnau, O; Gilormini, P

A modified affine theory for the overall properties of nonlinear composites*COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE*

- Fedelich, B

A stochastic Markovian model for fatigue short crack growth across microstructural barriers*COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE*

- Goldsztein, GH

Rigid perfectly plastic two-dimensional polycrystals*PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES*

- Vinogradov, AV; Patlan, V; Hashimoto, S

Spectral analysis of acoustic emission during cyclic deformation of coppersingle crystals*PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES*

- Leoni, M; Welzel, U; Lamparter, P; Mittemeijer, EJ; Kamminga, JD

Diffraction analysis of internal strain-stress fields in textured, transversely isotropic thin films: theoretical basis and simulation*PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES*

- Davies, H; Randle, V

The effect of low strain and annealing iterations on the ductility of alpha-brass*PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES*

- Bystrom, J; Helsing, J; Meidell, A

Some computational aspects of iterated structures*COMPOSITES PART B-ENGINEERING*

- Zhou, Y; Aust, KT; Erb, U; Palumbo, G

Effects of grain boundary structure on carbide precipitation in 304L stainless steel*SCRIPTA MATERIALIA*

- Besseghini, S; Pasquale, M; Passaretti, F; Sciacca, A; Villa, E

NiMnGa polycrystalline magnetically activated shape memory alloy: A calorimetric investigation*SCRIPTA MATERIALIA*

- Huang, JY; Zhu, YT; Jiang, H; Lowe, TC

Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening*ACTA MATERIALIA*

- Gertsman, VY; Bruemmer, SM

Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys*ACTA MATERIALIA*

- Dye, D; Stone, HJ; Reed, RC

A two phase elastic-plastic self-consistent model for the accumulation of microstrains in Waspaloy*ACTA MATERIALIA*

- Agnew, SR; Yoo, MH; Tome, CN

Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y*ACTA MATERIALIA*

- Heino, S; Karlsson, B

Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitic stainless steel-slip characteristics and development of dislocation structures*ACTA MATERIALIA*

- Karaman, I; Sehitoglu, H; Maier, HJ; Chumlyakov, YI

Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen*ACTA MATERIALIA*

- Qiu, X; Huang, Y; Nix, WD; Hwang, KC; Gao, H

Effect of intrinsic lattice resistance in strain gradient plasticity*ACTA MATERIALIA*

- Radovic, M; Barsoum, MW; El-Raghy, T; Wiederhorn, S

Tensile creep of fine grained (3-5 mu m) Ti3SiC2 in the 1000-1200 degrees C temperature range*ACTA MATERIALIA*

- Solas, DE; Tome, CN; Engler, O; Wenk, HR

Deformation and recrystallization of hexagonal metals: Modeling and experimental results for zinc*ACTA MATERIALIA*

- Miura, H; Kotani, K; Sakai, T

Temperature dependency of cyclic deformation behavior of Cu-SiO2 single crystal*ACTA MATERIALIA*

- Charit, I; Chokshi, AH

Experimental evidence for diffusion creep in the superplastic 3 mol% yttria-stabilized tetragonal zirconia*ACTA MATERIALIA*

- Jin, YM; Artemev, A; Khachaturyan, AG

Three-dimensional phase field model of low-symmetry martensitic transformation in polycrystal: Simulation of zeta '(2) martensite in AuCd alloys*ACTA MATERIALIA*

- Fulton, CC; Gao, H

Microstructural modeling of ferroelectric fracture*ACTA MATERIALIA*

- Zhang, J; Laird, C

Fracture behavior of monofilament-reinforced multicrystalline copper composites*ACTA MATERIALIA*

- Ding, LX; Wang, L; Nagashima, M; Hayakawa, M

A dilatometric study of the martensitic transformation of zirconia containing 1.8 similar to 2.0 mol% yttria*MATERIALS TRANSACTIONS*

- Evers, LP; Parks, DM; Brekelmans, WAM; Geers, MGD

Enhanced modeling of hardening in crystal plasticity for FCC metals*JOURNAL DE PHYSIQUE IV*

- Gasperini, M; Richard, V; Chiron, R

Development of plastic strain heterogeneities on cold-rolled aluminium alloys during in situ shear tests inside an SEM*JOURNAL DE PHYSIQUE IV*

- Gaudin, C; Guillemer-Neel, C; Feaugas, X

Hardening rate under reverse loading in 316 L: Back stress and effective stress evolutions*JOURNAL DE PHYSIQUE IV*

- Sauzay, M

Large plastic strains in surface grains*JOURNAL DE PHYSIQUE IV*

- Villechaise, P; Mineur, M; Mendez, J

Analysis of texture effects on fatigue behaviour of 316L stainless steel*JOURNAL DE PHYSIQUE IV*

- Nakano, M; Nagayama, H; Sakuma, T

Superplasticity in cation-doped YSZ*JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY*

- Brocato, M; Tamagny, P; Ehrlacher, A

Texture evolution and rotational hardening in multiple slip plasticity: a two dimensional study*EUROPEAN JOURNAL OF MECHANICS A-SOLIDS*

- Meille, S; Garboczi, EJ

Linear elastic properties of 2D and 3D models of porous materials made from elongated objects*MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING*

- Redfern, SE; Grimes, RW; Rawlings, RD

The hydroxylation of t-ZrO2 surfaces*JOURNAL OF MATERIALS CHEMISTRY*

- Ramamoorthy, R; Chaim, R

Microstructural evolution in nanocrystalline Y-TZP containing a silicate glass*JOURNAL OF THE EUROPEAN CERAMIC SOCIETY*

- Boulc'h, F; Djurado, E; Dessemond, L; Fouletier, J

Physico-chemical characterization of highly pure nanocrystalline doped TZP*JOURNAL OF THE EUROPEAN CERAMIC SOCIETY*

- Melendez-Martinez, JJ; Jimenez-Melendo, M; Dominguez-Rodriguez, A; Wotting, G

High temperature mechanical behavior of aluminium titanate-mullite composites*JOURNAL OF THE EUROPEAN CERAMIC SOCIETY*

- Morita, K; Hiraga, K

Deformed substructures in fine-grained tetragonal zirconia*PHILOSOPHICAL MAGAZINE LETTERS*

- Wang, YD; Peng, RL; McGreevy, RL

A novel method for constructing the mean field of grain-orientation-dependent residual stress*PHILOSOPHICAL MAGAZINE LETTERS*

- Kocks, UF

Realistic constitutive relations for metal plasticity*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Zhang, JP; Laird, C

Cyclic saturation and fatigue fracture of tungsten monofilament-reinforcedmulticrystalline copper composites*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Beaudoin, AJ; Acharya, A

A model for rate-dependent flow of metal polycrystals based on the slip plane lattice incompatibility*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Dominguez-Rodriguez, A; Gutierrez-Mora, F; Jimenez-Melendo, M; Routbort, JL; Chaim, R

Current understanding of superplastic deformation of Y-TZP and its application to joining*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Buque, C; Bretschneider, J; Schwab, A; Holste, C

Dislocation structures in cyclically deformed nickel polycrystals*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Li, JG; Zhang, LM; Shen, Q; Hashida, T

Degradation of yttria stabilized zirconia at 370 K under a low applied stress*MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING*

- Li, XW; Tian, JF; Li, SX; Wang, ZG

Application of a fractal method to quantitatively describe some typical fracture surfaces*MATERIALS TRANSACTIONS JIM*

- Onda, T; Lloyd, SJ; Suematsu, H; Yamauchi, H; Greer, AL; Kurashima, K; Bando, Y; Hayakawa, M

Grain boundary structure and solute segregation in CuO doped 3 mol% yttriastabilized zirconia*MATERIALS TRANSACTIONS JIM*

- Ramamoorthy, R; Chaim, R

Sintering and microstructure of glass-coated nanocrystalline yttria-stabilized tetragonal zirconia powder: Effect of the glass*JOURNAL OF MATERIALS RESEARCH*

- Paquin, A; Berbenni, S; Favier, V; Lemoine, X; Berveiller, M

Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels*INTERNATIONAL JOURNAL OF PLASTICITY*

- MacLachlan, DW; Wright, LW; Gunturi, S; Knowles, DM

Constitutive modelling of anisotropic creep deformation in single crystal blade alloys SRR99 and CMSX-4*INTERNATIONAL JOURNAL OF PLASTICITY*

- Owen, DM; Chokshi, AH

Analysis of deformation mechanisms in superplastic yttria-stabilized tetragonal zirconia*INTERNATIONAL JOURNAL OF PLASTICITY*

- Chen, SH; Wang, TC

Mode I and mode II crack tip asymptotic fields with strain gradient effects*ACTA MECHANICA SINICA*

- Bray, KL

High pressure probes of electronic structure and luminescence properties of transition metal and lanthanide systems*TRANSITION METAL AND RARE EARTH COMPOUNDS: EXCITED STATES, TRANSITION, INTERACTIONS I*

- Lee, JH; Mori, T; Li, JG; Ikegami, T; Takenouchi, S

The influence of alumina addition and its distribution upon grain-boundaryconduction in 15 mol.% calcia-stabilized zirconia*CERAMICS INTERNATIONAL*

- Davies, P; Randle, V

Grain boundary engineering and the role of the interfacial plane*MATERIALS SCIENCE AND TECHNOLOGY*

- Tekeli, S; Davies, TJ

Possible ways of entrancing high temperature ductility in CuO doped cubic zirconia (8Y-CSZ)*MATERIALS SCIENCE AND TECHNOLOGY*

- He, LH; Lim, CW

Time-dependent interfacial sliding in fiber composites under longitudinal shear*COMPOSITES SCIENCE AND TECHNOLOGY*

- Schaller, R; Lakki, A

Grain boundary relaxations in ceramics*MECHANICAL SPECTROSCOPY Q-1 2001*

- Lin, JD; Duh, JG; Chiou, BS

The influence of washing and calcination condition on urea-derived ceria-yttria-doped tetragonal zirconia powders*MATERIALS CHEMISTRY AND PHYSICS*

- Zheng, QS; Zou, WN

Orientation distribution functions for microstructures of heterogeneous materials (I) - Directional distribution functions and irreducible tensors*APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION*

- Zheng, QS; Fu, YB

Orientation distribution functions for microstructures of heterogeneous materials (II) - Crystal distribution functions and irreducible tensors restricted by various material symmetries*APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION*

- Zhao, ZW

Some misunderstandings on rotation of crystals and reasonable plastic strain rate*APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION*

- Lee, JH; Yoon, SM; Kim, BK; Kim, J; Lee, HW; Song, HS

Electrical conductivity and defect structure of yttria-doped ceria-stabilized zirconia*SOLID STATE IONICS*

- Buque, C

Persistent slip bands in cyclically deformed nickel polycrystals*INTERNATIONAL JOURNAL OF FATIGUE*

- Gertsman, VY

Coincidence site lattice theory of multicrystalline ensembles*ACTA CRYSTALLOGRAPHICA SECTION A*

- Jessell, M; Bons, P; Evans, L; Barr, T; Stuwe, K

Elle: the numerical simulation of metamorphic and deformation microstructures*COMPUTERS & GEOSCIENCES*

- Yang, CH; Kumar, AV

Investigation of strain hardening in NiAl single crystals using three-dimensional FEA models*JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME*

- Hebesberger, T; Schafler, E; Zehetbauer, M; Pippan, R; Ungar, T; Bernstorff, S

Electron back scatter diffraction and synchrotron X-ray peak profile analysis as tools for microstructural characterization of large strain work hardened metals*ZEITSCHRIFT FUR METALLKUNDE*

- Kuchinke, J; Jansen, C; Lindemann, A; Krebs, B

Syntheses and crystal structures of the novel ternary thioborates Na3BS3, K3BS3, and Rb3BS3*ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE*

- Gutierrez-Mora, F; Jimenez-Melendo, M; Dominguez-Rodriguez, A

Comparation of the high temperature mechanical behavior between Y-TZP nanoceramics and submicrometer materials*REVISTA DE METALURGIA*

- Cermelli, P; Gurtin, ME

On the characterization of geometrically necessary dislocations in finite plasticity*JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS*

- Kessler, H; Balke, H

On the local and average energy release in polarization switching phenomena*JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS*

- Goldsztein, GH

The effective energy and laminated microstructures in martensitic phase transformations*JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS*

- Garmestani, H; Lin, S; Adams, BL; Ahzi, S

Statistical continuum theory for large plastic deformation of polycrystalline materials*JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS*

- Bohlke, T; Bertram, A

Isotropic orientation distributions of cubic crystals*JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS*

- Dafalias, YF

Orientation distribution function in non-affine rotations*JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS*

- Castelnau, O; Francillette, H; Bacroix, B; Lebensohn, RA

Texture dependent plastic behavior of Zr 702 at large strain*JOURNAL OF NUCLEAR MATERIALS*

- Girard, E; Guillen, R; Weisbecker, P; Francois, M

Effect of plastic shearing on damage and texture on Zircaloy-4 cladding tubes: experimental and numerical study*JOURNAL OF NUCLEAR MATERIALS*

- Yuh, SD; Lai, YC; Chou, CC; Lee, HY

YNbO4-addition on the fracture toughness of ZrO2(3Y) ceramics*JOURNAL OF MATERIALS SCIENCE*

- Guo, X

Hydrothermal degradation mechanism of tetragonal Zirconia*JOURNAL OF MATERIALS SCIENCE*

- Quinelato, AL; Longo, E; Leite, ER; Bernardi, MIB; Varela, JA

Synthesis and sintering of ZrO2-CeO2 powder by use of polymeric precursor based on Pechini process*JOURNAL OF MATERIALS SCIENCE*

- Guo, Y; Huang, Y; Gao, H; Zhuang, Z; Hwang, KC

Taylor-based nonlocal theory of plasticity: numerical studies of the micro-indentation experiments and crack tip fields*INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES*

- Kamlah, M; Bohle, U

Finite element analysis of piezoceramic components taking into account ferroelectric hysteresis behavior*INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES*

- Nakamachi, E; Xie, CL; Harimoto, M

Drawability assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses*INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES*

- Chinh, PD

Bounds on uncertainty intervals for elastic moduli of completely random aggregates of hexagonal crystals*INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE*

- Guo, X; Maier, J

Grain boundary blocking effect in zirconia: A Schottky barrier analysis*JOURNAL OF THE ELECTROCHEMICAL SOCIETY*

- Tommasi, A; Vauchez, A

Continental rifting parallel to ancient collisional belts: an effect of the mechanical anisotropy of the lithospheric mantle*EARTH AND PLANETARY SCIENCE LETTERS*

- Sakka, Y; Ozawa, K; Uchikoshi, T; Hiraga, K

Colloidal processing and ionic conductivity of fine-grained cupric-oxide-doped tetragonal zirconia*JOURNAL OF THE AMERICAN CERAMIC SOCIETY*

- Yasuda, K; Goto, Y; Takeda, H

Influence of tetragonality on tetragonal-to-monoclinic phase transformation during hydrothermal aging in plasma-sprayed yttria-stabilized zirconia coatings*JOURNAL OF THE AMERICAN CERAMIC SOCIETY*

- Sudhir, B; Chokshi, AH

Compression creep characteristics of 8-mol%-yttria-stabilized cubic-zirconia*JOURNAL OF THE AMERICAN CERAMIC SOCIETY*

- Jimenez-Melendo, M; Haneda, H; Nozawa, H

Ytterbium cation diffusion in yttrium aluminum garnet (YAG) - Implicationsfor creep mechanisms*JOURNAL OF THE AMERICAN CERAMIC SOCIETY*

- Harder, J

FEM-simulation of the hardening behavior of FCC single crystals*ACTA MECHANICA*

- He, LH

Transient stress relaxation around spherical inclusions by interfacial diffusion and sliding*ACTA MECHANICA*

- Ivankina, TI; Nikitin, AN; Telepnev, AS; Ullemeyer, K; Efimova, GA; Kireenkova, SM; Sobolev, GA; Sukhoparov, VA; Walther, K

The effect of temperature and long-term mechanical stresses on the deformational, thermal, and textural characteristics of marble*IZVESTIYA-PHYSICS OF THE SOLID EARTH*

- Nguyen, BN; Onck, P; Van der Giessen, E

A homogenized microstructural approach to creep fracture*COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE*

- Guo, X

In situ monitoring of the low temperature degradation of tetragonal zirconia with impedance spectroscopy*ADVANCED ENGINEERING MATERIALS*

- Marketz, WT; Fischer, FD; Kauffmann, F; Dehm, G; Bidlingmaier, T; Wanner, A; Clemens, H

Computational modeling and experimental study of the deformation behavior of gamma-TiAl-based alloys*ADVANCED ENGINEERING MATERIALS*

- Lurie, KA

Bounds for the electromagnetic material properties of a spatio-temporal dielectric polycrystal with respect to one-dimensional wave propagation*PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES*

- Hughes, DA; Lebensohn, RA; Wenk, HR; Kumar, A

Stacking fault energy and microstructure effects on torsion texture evolution*PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES*

- Suzuki, TS; Sakka, Y; Morita, K; Hiraga, K

Enhanced superplasticity in a alumina-containing zirconia prepared by colloidal processing*SCRIPTA MATERIALIA*

ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici

Documento generato il 25/10/20 alle ore 16:11:24