Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'PLASTIC STRAIN' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 105 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Heino, S; Karlsson, B
      Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitic stainless steel-stress-strain relations and fatigue life

      ACTA MATERIALIA
    2. Heino, S; Karlsson, B
      Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitic stainless steel-slip characteristics and development of dislocation structures

      ACTA MATERIALIA
    3. Zhang, ZF; Wang, ZG; Sun, ZM
      Evolution and microstructural characteristics of deformation bands in fatigued copper single crystals

      ACTA MATERIALIA
    4. Oikawa, H
      Some aspects of elevated-temperature deformation of single-phase alloys

      MATERIALS TRANSACTIONS
    5. Li, XW; Zhang, ZF; Wang, ZG; Li, SX; Umakoshi, Y
      SEM-ECC investigation of dislocation arrangements in cyclically deformed copper single crystals with different crystallographic orientations

      DEFECTS AND DIFFUSION IN METALS III
    6. Luce, R; Wolske, M; Kopp, R; Roters, F; Gottstein, G
      Application of a dislocation model for FE-process simulation

      COMPUTATIONAL MATERIALS SCIENCE
    7. Wang, ZG; Dohda, K; Jeong, Y
      FEM simulation of surface smoothing in the ironing process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    8. Magnin, T; Bosch, C; Wolski, K; Delafosse, D
      Cyclic plastic deformation behaviour of Ni single crystals oriented for single slip as a function of hydrogen content

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    9. Goerdeler, M; Gottstein, G
      A microstructural work hardening model based on three internal state variables

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    10. Feaugas, X; Gaudin, C
      Different levels of plastic strain incompatibility during cyclic loading: in terms of dislocation density and distribution

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    11. Polak, J; Fardoun, F; Degallaix, S
      Analysis of the hysteresis loop in stainless steels I. Austenitic and ferritic steels

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    12. Polak, J; Fardoun, F; Degallaix, S
      Analysis of the hysteresis loop in stainless steels II. Austenitic-ferritic duplex steel and the effect of nitrogen

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    13. Gall, K; Horstemeyer, MF; Degner, BW; McDowell, DL; Fan, JH
      On the driving force for fatigue crack formation from inclusions and voidsin a cast A356 aluminum alloy

      INTERNATIONAL JOURNAL OF FRACTURE
    14. Jadhav, SG; Bieler, TR; Subramanian, KN; Lucas, JP
      Stress relaxation behavior of composite and eutectic Sn-Ag solder joints

      JOURNAL OF ELECTRONIC MATERIALS
    15. Sener, JY; Van Dooren, F; Delannay, F
      Peel testing of adhesively bonded thin metallic plates with control of substrate plastic straining and of debonding mode mixity

      JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
    16. Meng, QP; Rong, YH; Chen, SP; Hsu, TY
      The relationship of the volume fraction of martensite vs. plastic strain in an Fe-Mn-Si-Cr-N shape memory alloy

      MATERIALS LETTERS
    17. Ye, DY; Wang, ZL
      A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cyclic plastic strain energy during fatigue

      INTERNATIONAL JOURNAL OF FATIGUE
    18. Shimizu, K; Noguchi, T; Seitoh, H; Okada, M; Matsubara, Y
      FEM analysis of erosive wear

      WEAR
    19. Lemarchand, C; Devincre, B; Kubin, LP
      Homogenization method for a discrete-continuum simulation of dislocation dynamics

      JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
    20. Jiang, Y
      A fatigue criterion for general multiaxial loading

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    21. Han, NL; Yang, JM; Wang, ZG
      Role of real matrix strain in low cycle fatigue life of a SiC particulate reinforced aluminum composite

      SCRIPTA MATERIALIA
    22. Roters, F; Raabe, D; Gottstein, G
      Work hardening in heterogeneous alloys - A microstructural approach based on three internal state variables

      ACTA MATERIALIA
    23. AlShebani, MM; Sinha, SN
      Cyclic compressive loading-unloading curves of brick masonry

      STRUCTURAL ENGINEERING AND MECHANICS
    24. Hadrboletz, A; Weiss, B; Stickler, R
      The significance of the intrinsic threshold - What is new?

      FATIGUE CRACK GROWTH THRESHOLDS, ENDURANCE LIMITS, AND DESIGN
    25. Tang, J; Ogarevic, V; Tsai, CS
      An integrated CAE environment for simulation-based durability and reliability design

      ADVANCES IN ENGINEERING SOFTWARE
    26. Reynolds, AP; Baxter, SC
      Kinematic hardening in a dispersion strengthened aluminum alloy: experiment and modeling

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    27. Liu, R; Li, DY
      A finite element model study on wear resistance of pseudoelastic TiNi alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    28. Takeuchi, S; Kakegawa, T; Hashimoto, T; Tsai, AP; Inoue, A
      Low temperature mechanical properties of bulk metallic glasses

      MATERIALS TRANSACTIONS JIM
    29. Dingli, JP; Abdul-Latif, A; Saanouni, K
      Predictions of the complex cyclic behavior of polycrystals using a self-consistent modeling

      INTERNATIONAL JOURNAL OF PLASTICITY
    30. Prasad, NE; Rao, PR
      Low cycle fatigue resistance of Al-Li alloys

      MATERIALS SCIENCE AND TECHNOLOGY
    31. Guo, YQ; Batoz, JL; Naceur, H; Bouabdallah, S; Mercier, F; Barlet, O
      Recent developments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach

      COMPUTERS & STRUCTURES
    32. El Abdi, R; Samrout, H
      A non-linear kinematic hardening model for a steel under complex loadings

      COMPUTERS & STRUCTURES
    33. Xie, Y; Hawthorne, HM
      On the possibility of evaluating the resistance of materials to wear by ploughing using a scratch method

      WEAR
    34. Chaudhri, MM
      Strain hardening around spherical indentations

      PHYSICA STATUS SOLIDI A-APPLIED RESEARCH
    35. Ishikawa, N; Kurihara, M; Toyoda, M
      Effect of microstructure on low-cycle fatigue property of structural steels under large plastic deformation

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    36. Inoue, T; Torizuka, S; Nagai, K
      Numerical analysis of plastic strain distribution through multi-directional deformation

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    37. Mughrabi, H
      On the life-controlling microstructural fatigue mechanisms in ductile metals and alloys in the gigacycle regime

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    38. Shimizu, K; Noguchi, T; Matubara, Y; Seitoh, H
      FEM analysis of Erosive wear

      INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
    39. Kato, A; Hayashi, M
      Fatigue life estimation of steel using laser speckle sensor

      NDT & E INTERNATIONAL
    40. Zhang, ZF; Wang, ZG
      Cyclic deformation features of a copper bicrystal with an embedded grain and surrounding grain boundary

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    41. Song, CR; Voyiadjis, GZ; Tumay, MT
      Determination of permeability of soils using the multiple piezo-element penetrometer

      INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS
    42. Lin, SY
      Investigation of die-workpiece interface friction with lubrication during the upsetting process

      INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    43. Jiang, FC; Liu, RT; Liu, DK
      A damage function used for prediction of low cyclic fatigue life

      APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION
    44. Kandil, FA
      Potential ambiguity in the determination of the plastic strain range component in LCF testing

      INTERNATIONAL JOURNAL OF FATIGUE
    45. Du, ML; Chiang, FP
      Observation of the propagation of plastic strain in HSLA 80 steel

      JOURNAL OF TESTING AND EVALUATION
    46. Gong, Y; Norton, M
      Cyclic response and fatigue of steels subjected to strain control with non-zero means

      JOURNAL OF TESTING AND EVALUATION
    47. Shimizu, K; Noguchi, T; Seitoh, H; Muranaka, E
      FEM analysis of the dependency on impact angle during erosive wear

      WEAR
    48. Lee, YZ; Kim, BJ
      The influence of the boundary lubricating conditions of three different fluids on the plastic fatigue related mechanisms of wear and scuffing

      WEAR
    49. Kurita, M; Yamamoto, M; Kunishige, K
      Effect of strengthening mechanisms on limit stress for slip bands formation under cyclic deformation of hot-rolled sheet steel

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    50. Ishikawa, N; Kobayashi, Y; Kurihara, M; Osawa, K; Toyoda, M
      Ductile crack initiation behavior of structural steel under cyclic loading

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    51. Selvadurai, APS; Nguyen, TS
      Mechanics and fluid transport in a degradable discontinuity

      ENGINEERING GEOLOGY
    52. LUOH T; TSAI HT; CHANG CP
      DISLOCATION-STRUCTURES OF PERSISTENT SLIP BANDS IN CYCLICALLY DEFORMED POLYCRYSTALLINE COPPER

      Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
    53. ZHANG ZF; WANG ZG
      EFFECTS OF GRAIN-BOUNDARIES ON CYCLIC DEFORMATION-BEHAVIOR OF COPPER BICRYSTALS AND COLUMNAR CRYSTALS

      Acta materialia
    54. SUH YS
      THE INFLUENCE OF PLASTIC-STRAIN-INDUCED ANISOTROPY MODELED AS COMBINED ISOTROPIC-KINEMATIC HARDENING IN THE TENSION-TORSION STRAINING PROBLEM(I) - REPRESENTATION OF THE BACK STRESS AND APPLICABILITY OF THE COMBINED ISOTROPIC-KINEMATIC HARDENING MODEL

      KSME INTERNATIONAL JOURNAL
    55. SUH YS
      THE INFLUENCE OF PLASTIC-STRAIN-INDUCED ANISOTROPY MODELED AS COMBINED ISOTROPIC-KINEMATIC HARDENING IN THE TENSION-TORSION STRAINING PROBLEM(II) - NUMERICAL VERIFICATIONS WITH EXPERIMENTAL MEASUREMENTS

      KSME INTERNATIONAL JOURNAL
    56. ESTRIN Y
      DISLOCATION THEORY-BASED CONSTITUTIVE MODELING - FOUNDATIONS AND APPLICATIONS

      Journal of materials processing technology
    57. DANCKERT J; NIELSEN KB
      DETERMINATION OF THE PLASTIC ANISOTROPY-R IN SHEET-METAL USING AUTOMATIC TENSILE TEST EQUIPMENT

      Journal of materials processing technology
    58. LIN TH; WONG KKF; TENG NJ; LIN SR
      MICROMECHANIC ANALYSIS OF FATIGUE BAND CROSSING GRAIN-BOUNDARY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    59. GURALNICK SA; YALA A
      PLASTIC COLLAPSE, INCREMENTAL COLLAPSE, AND SHAKEDOWN OF REINFORCED-CONCRETE STRUCTURES

      ACI structural journal
    60. KIYAMA S; HASEGAWA T
      CONTROLLABLE DEFORMATION BY PLASTIC STRAIN CONTROL FOR GEOMATERIALS

      Proceedings of the Japan Academy. Series B Physical and biological sciences
    61. Dwivedi, VS; Jha, BK
      Microstructural evolution of modified 9Cr-1Mo steel

      JOURNAL OF MATERIALS SCIENCE LETTERS
    62. MAKAROV PV; SMOLIN IY; PROKOPINSKY IP
      LOCALIZED PLASTIC STRAIN IN POLYCRYSTALLINE MATERIALS WITH HOLE AND NOTCHES

      Theoretical and applied fracture mechanics
    63. HU GK; WENG GJ
      INFLUENCE OF THERMAL RESIDUAL-STRESSES ON THE COMPOSITE MACROSCOPIC BEHAVIOR

      Mechanics of materials
    64. QIAO LJ; LUO JL; MAO X
      HYDROGEN EVOLUTION AND ENRICHMENT AROUND STRESS-CORROSION CRACK TIPS OF PIPELINE STEELS IN DILUTE BICARBONATE SOLUTION

      Corrosion
    65. WANG ZR; GONG B; WANG ZG
      CYCLIC DEFORMATION-BEHAVIOR AND DISLOCATION-STRUCTURES OF [001]-COPPER SINGLE-CRYSTALS .2. CHARACTERISTICS OF DISLOCATION-STRUCTURES

      Acta materialia
    66. REYNOLDS AP; LYONS JS
      ISOTROPIC AND KINEMATIC HARDENING IN A DISPERSION-STRENGTHENED ALUMINUM-ALLOY

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    67. PAUL SK; RAY A
      INFLUENCE OF INCLUSION CHARACTERISTICS ON THE FORMABILITY AND TOUGHNESS PROPERTIES OF A HOT-ROLLED DEEP-DRAWING QUALITY STEEL

      Journal of materials engineering and performance
    68. SAADA G; BONNEVILLE J; SPATIG P
      INTERPRETATION OF THE MEASUREMENT OF ACTIVATION PARAMETERS IN L1(2) ALLOYS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    69. ALAIN R; VIOLAN P; MENDEZ J
      LOW-CYCLE FATIGUE BEHAVIOR IN VACUUM OF A 316L TYPE AUSTENITIC STAINLESS-STEEL BETWEEN 20 AND 600-DEGREES-C .1. FATIGUE RESISTANCE AND CYCLIC BEHAVIOR

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    70. ROATTA A; BOLMARO RE
      AN ESHELBY INCLUSION BASED MODEL FOR THE STUDY OF STRESSES AND PLASTIC STRAIN LOCALIZATION IN METAL-MATRIX COMPOSITES .2. FIBER REINFORCEMENT AND LAMELLAR INCLUSIONS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    71. FUJII T; SHINTATE H; YAGUCHI H; MITANI H; INADA A; SHINKAI K; KUMAI S; KATO M
      MICROSTRUCTURAL DEVELOPMENT DURING FATIGUE OF A POLYCRYSTALLINE 3003-ALUMINUM-ALLOY

      ISIJ international
    72. FANG J; NI SY; YANG HW; BAI SL; DAI FL
      EXPERIMENTAL INVESTIGATION INTO PLASTIC DAMAGE OF MICROVOIDS WITH INTERACTION

      Acta Mechanica Sinica
    73. REES DWA; POWER RK
      ORIENTATION AND FORMABILITY OF ORTHOTROPIC SHEET METALS

      Journal of strain analysis for engineering design
    74. SHINOZAKI K; KANG CY; KIM YC; ARITOSHI M; NORTH TH; NAKAO Y
      THE METALLURGICAL AND MECHANICAL-PROPERTIES OF ODS ALLOY MA-956 FRICTION WELDS

      Welding journal
    75. MEGATA M
      EXPANDED HEAT-TREATMENT TO FORM RESIDUAL COMPRESSIVE HOOP-STRESS ON INNER SURFACE OF ZIRCONIUM ALLOY TUBING

      Journal of Nuclear Science and Technology
    76. POLAK J; VASEK A; OBRTLIK K
      FATIGUE DAMAGE IN 2-STEP LOADING OF 316L STEEL .1. EVOLUTION OF PERSISTENT SLIP BANDS

      Fatigue & fracture of engineering materials & structures
    77. VASEK A; POLAK J; OBRTLIK K
      FATIGUE DAMAGE IN 2-STEP LOADING OF 316L STEEL .2. SHORT CRACK-GROWTH

      Fatigue & fracture of engineering materials & structures
    78. ZHAI T; MARTIN JW; BRIGGS GAD
      FATIGUE DAMAGE AT ROOM-TEMPERATURE IN ALUMINUM SINGLE-CRYSTALS .2. TEM

      Acta materialia
    79. MALAKONDAIAH G; NICHOLAS T
      HIGH-TEMPERATURE LOW-CYCLE FATIGUE OF A GAMMA-TITANIUM ALUMINIDE ALLOY TI-46AL-2NB-2CR

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    80. ZHAO X; XU JZ; LIANG ZD; HUANG LM
      IMPROVEMENTS OF THE CRYSTALLOGRAPHIC APPROACH TO PLASTIC STRAIN RATIOIN DEEP-DRAWING STEEL SHEETS

      Chinese Science Bulletin
    81. PRASAD NE; MALAKONDAIAH G; KUTUMBARAO VV
      ON THE BILINEARITY IN FATIGUE POWER-LAW RELATIONSHIPS IN ALUMINUM-LITHIUM ALLOYS

      Transactions of the Indian Institute of Metals
    82. VIDEM M; RYUM N
      CYCLIC DEFORMATION AND FRACTURE OF PURE ALUMINUM POLYCRYSTALS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    83. GONG B; WANG ZR; WANG ZG; ZHANG YW
      CYCLIC DEFORMATION RESPONSE AND DISLOCATION-STRUCTURE OF CU SINGLE-CRYSTALS ORIENTED FOR DOUBLE SLIP

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    84. DUBOIS A; OUDIN J; PICART P
      ELASTOPLASTIC FINITE-ELEMENT ANALYSES OF AN UPSETTING-SLIDING TEST FOR THE DETERMINATION OF FRICTION AT MEDIUM AND HIGH CONTACT PRESSURE

      Tribology international
    85. ROTERS F; RAABE D
      NUMERICAL-SIMULATION OF STRESS-FIELDS OF DISLOCATION NETWORKS WITH SPECIAL REGARD TO INTERFACE DISLOCATIONS

      Materials science and technology
    86. PAUL SK; MISHRA S
      ON THE FORMABILITY OF SHEET STEELS

      Bulletin of Materials Science
    87. XU G; SADEGHI F
      SPALL INITIATION AND PROPAGATION DUE TO DEBRIS DENTING

      Wear
    88. CLAYTON P; SU X
      SURFACE INITIATED FATIGUE OF PEARLITIC AND BAINITIC STEELS UNDER WATER LUBRICATED ROLLING SLIDING CONTACT/

      Wear
    89. IINO Y; KIM TY; MUN SD
      MACHINED SURFACE PLASTIC STRAIN IN ORTHOGONAL CUTTING BY SUBSEQUENT RECRYSTALLIZATIONS TECHNIQUE

      Wear
    90. SUTTON MA; DENG X; LIU J; YANG L
      DETERMINATION OF ELASTIC-PLASTIC STRESSES AND STRAINS FROM MEASURED SURFACE STRAIN DATA

      Experimental mechanics
    91. RAABE D
      NUMERICAL 3-DIMENSIONAL SIMULATIONS OF THE STRESS-FIELDS OF DISLOCATIONS IN FACE-CENTERED-CUBIC CRYSTALS

      Modelling and simulation in materials science and engineering
    92. RAABE D
      ON THE STRESS-FIELDS OF CRYSTAL DISLOCATIONS WITH FRACTAL GEOMETRY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    93. MEYERS MA; BATSANOV SS; GAVRILKIN SM; CHEN HC; LASALVIA JC; MARQUIS FDS
      EFFECT OF SHOCK PRESSURE AND PLASTIC STRAIN ON CHEMICAL-REACTIONS IN NB-SI AND MO-SI SYSTEMS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    94. BELL JF
      LABORATORY EXPERIMENTS ON THIN-WALLED TUBES AT LARGE FINITE STRAIN - SYMMETRY, COAXIALITY, RIGID-BODY ROTATION, AND THE ROLE OF INVARIANTS,FOR THE APPLIED STRESS SIGMA=RT(R)T, THE CAUCHY STRESS SIGMA-ASTERISK= [IIIV]-1 FT(R)T, AND THE LEFT CAUCHY-GREEN STRETCH TENSOR V=FRT

      International journal of plasticity
    95. OKA YI; MATSUMURA M
      MEASUREMENTS OF PLASTIC STRAIN BELOW AN INDENTATION AND PILING-UP BETWEEN 2 ADJACENT INDENTATIONS

      Wear
    96. HUGHES DA; DAWSON DB; KORELLIS JS; WEINGARTEN LI
      A MICROSTRUCTURALLY BASED METHOD FOR STRESS ESTIMATES

      Wear
    97. TYFOUR WR; BEYNON JH; KAPOOR A
      THE STEADY-STATE WEAR BEHAVIOR OF PEARLITIC RAIL STEEL UNDER DRY ROLLING SLIDING CONTACT CONDITIONS

      Wear
    98. BELL JF
      A RETROSPECT ON THE CONTRIBUTIONS OF GI TAYLOR TO THE CONTINUUM PHYSICS OF SOLIDS

      Experimental mechanics
    99. LIU CD; BASSIM MN; YOU DX
      DISLOCATION-STRUCTURES IN FATIGUED POLYCRYSTALLINE COPPER

      Acta metallurgica et materialia
    100. TYFOUR WR; BEYNON JH
      THE EFFECT OF ROLLING DIRECTION REVERSAL ON THE WEAR RATE AND WEAR MECHANISM OF PEARLITIC RAIL STEEL

      Tribology international


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 31/10/20 alle ore 21:08:34