Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'MOSI2' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 256 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Ohishi, N; Yanagisawa, H; Sasaki, K; Abe, Y
      Initial silicide formation process of Mo/(100) Si system prepared using anultrahigh-vacuum sputtering system

      ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS
    2. Mitchell, TE; Baskes, MI; Chen, SP; Hirth, JP; Hoagland, RG
      Stacking-fault energy and yield stress asymmetry in molybdenum disilicide

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    3. Sharif, AA; Misra, A; Petrovic, JJ; Mitchell, TE
      Solid solution hardening and softening in MoSi2 alloys

      SCRIPTA MATERIALIA
    4. Lee, WH; Lee, JH; Bae, JD; Byun, CS; Kim, DK
      Syntheses of Ni2Si, Ni5Si2, and NiSi by mechanical alloying

      SCRIPTA MATERIALIA
    5. Inui, H; Hashimoto, T; Tanaka, K; Tanaka, I; Mizoguchi, T; Adachi, H; Yamaguchi, M
      Defect and electronic structures in TiSi2 thin films produced by co-sputtering part 1: Defect analysis by transmission electron microscopy

      ACTA MATERIALIA
    6. Wei, FG; Kimura, Y; Mishima, Y
      Microstructure and phase stability in MOSi2-TSi2 (T=Cr, V, Nb, Ta, Ti) pseudo-binary systems

      MATERIALS TRANSACTIONS
    7. Vaidya, RU; Rangaswamy, P; Misra, A; Verdier, M
      Residual stresses and interface strengths in MoSi2/stainless steel 316L joints produced by metallic-glass brazing

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    8. Lee, WH; Byun, CS; Lee, SH; Kim, DK
      Effects of Si and Ni powder refining on the formation mechanism of nickel silicides induced by mechanical alloying

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    9. Wei, FG; Kimura, Y; Mishima, Y
      Characterization of C11(b)/C40 lamellae in a MoSi2-15mol%TaSi2 alloy

      INTERMETALLICS
    10. Ito, K; Ihara, K; Tanaka, K; Fujikura, M; Yamaguchi, M
      Physical and mechanical properties of single crystals of the T-2 phase in the Mo-Si-B system

      INTERMETALLICS
    11. Tanaka, K; Nawata, K; Inui, H; Yamaguchi, M; Koiwa, M
      Refinement of crystallographic parameters in transition metal disilicides with the C11(b), C40 and C54 structures

      INTERMETALLICS
    12. Nanko, M; Kitahara, A; Ogura, T; Kamata, H; Maruyama, T
      Formation of Mo(Si, Al)(2) layer on Mo dipped in Al melt saturated with Siand the effects of transition metals added in the melt

      INTERMETALLICS
    13. Liu, YQ; Shao, G; Tsakiropoulos, P
      On the oxidation behaviour of MoSi2

      INTERMETALLICS
    14. Mitchell, TE; Baskes, MI; Hoagland, RG; Misra, A
      Dislocation core structures and yield stress anomalies in molybdenum disilicide

      INTERMETALLICS
    15. Inui, H; Yamaguchi, M
      Deformation mechanisms of transition-metal disilicides with the hexagonal C40 structure

      INTERMETALLICS
    16. Dumont, AL; Bonnet, JP; Chartier, T; Ferreira, JMF
      MoSi2/Al2O3 FGM: elaboration by tape casting and SHS

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    17. Bundschuh, K; Schutze, M
      Materials for temperatures above 1500 degrees C in oxidizing atmospheres Part I: Basic considerations on materials selection

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    18. Shon, IJ; Rho, DH; Kim, HC; Munir, ZA
      Synthesis of WSi2-ZrO2 and WSi2-Nb composites by field-activated combustion

      JOURNAL OF ALLOYS AND COMPOUNDS
    19. Shon, IJ; Rho, DH; Kim, HC; Munir, ZA
      Dense WSi2 and WSi2-20 vol.% ZrO2 composite synthesized by pressure-assisted field-activated combustion

      JOURNAL OF ALLOYS AND COMPOUNDS
    20. Maglia, F; Anselmi-Tamburini, U; Milanese, C; Bertolino, N; Munir, ZA
      Field activated combustion synthesis of the silicides of vanadium

      JOURNAL OF ALLOYS AND COMPOUNDS
    21. Gras, C; Vrel, D; Gaffet, E; Bernard, F
      Mechanical activation effect on the self-sustaining combustion reaction inthe Mo-Si system

      JOURNAL OF ALLOYS AND COMPOUNDS
    22. Beckman, S; Cook, BA; Akinc, M
      Analysis of electrical resistivity of compositions within the Mo-Si-B ternary system, part I: single phase compounds

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    23. Maglia, F; Anselmi-Tamburini, U; Cocco, G; Monagheddu, M; Bertolino, N; Munir, ZA
      Combustion synthesis of mechanically activated powders in the Ti-Si system

      JOURNAL OF MATERIALS RESEARCH
    24. Maglia, F; Anselmi-Tamburini, U; Bertolino, N; Milanese, C; Munir, ZA
      Field-activated combustion synthesis of Ta-Si intermetallic compounds

      JOURNAL OF MATERIALS RESEARCH
    25. Ma, Q; Yang, YQ; Kang, MK; Xue, QJ
      Microstructures and mechanical properties of hot-pressed MoSi2-matrix composites reinforced with SiC and ZrO2 particles

      COMPOSITES SCIENCE AND TECHNOLOGY
    26. Lee, WH; Reucroft, PJ; Byun, CS; Kim, DK
      Effect of Si powder refining on the self-propagating high temperature synthesis reaction of titanium silicide induced by mechanical alloying

      JOURNAL OF MATERIALS SCIENCE LETTERS
    27. Reisel, G; Wielage, B; Steinhauser, S; Morgenthal, I; Scholl, R
      High temperature oxidation behavior of HVOF-sprayed unreinforced and reinforced molybdenum disilicide powders

      SURFACE & COATINGS TECHNOLOGY
    28. La, PQ; Xue, QJ; Liu, WM
      Tribological properties of MoSi2-MoS2 coatings coupling with SAE 52100 steel under reciprocating sliding

      SURFACE & COATINGS TECHNOLOGY
    29. Takacs, L; Soika, V; Balaz, P
      The effect of mechanical activation on highly exothermic powder mixtures

      SOLID STATE IONICS
    30. Castle, JE; Salvi, AM; Guascito, MR
      Analysis of the x-ray photoelectron energy-loss background in silicides

      SURFACE AND INTERFACE ANALYSIS
    31. Alman, DE; Hawk, JA
      Abrasive wear behavior of a brittle matrix (MoSi2) composite reinforced with a ductile phase (Nb)

      WEAR
    32. Perez, P
      Oxidation behavior of Al-alloyed ZrSi2

      OXIDATION OF METALS
    33. Zhu, Q; Shobu, K; Zeng, Y; Watanabe, T
      Oxidation behavior of hot-pressed MoSi2-TiC composite

      JOURNAL OF MATERIALS SCIENCE
    34. Byun, CS; Bopark, S; Kim, DK; Lee, W; Hyun, CY; Reucroft, PJ
      Formation mechanism of titanium silicide by mechanical alloying

      JOURNAL OF MATERIALS SCIENCE
    35. Yen, BK
      Self-propagating exothermic reactions between silicon and transition metals of groups IVA-VIA induced by mechanical alloying

      JOURNAL OF APPLIED PHYSICS
    36. Akiyama, M; Xu, CN; Kodama, M; Usui, I; Nonaka, K; Watanabe, T
      Preparation of highly oriented aluminum nitride thin films on polycrystalline substrates by helicon plasma sputtering and annealing

      JOURNAL OF THE AMERICAN CERAMIC SOCIETY
    37. Carrillo-Heian, EM; Carpenter, RD; Paulino, GH; Gibeling, JC; Munir, ZA
      Dense layered molybdenum disilicide-silicon carbide functionally graded composites formed by field-activated synthesis

      JOURNAL OF THE AMERICAN CERAMIC SOCIETY
    38. Lee, SP; Fukunaga, H
      Interfacial reaction layer of Nb/MoSi2 laminate composites and its effect of fracture characteristics

      SCRIPTA MATERIALIA
    39. Misra, A; Sharif, AA; Petrovic, JJ; Mitchell, TE
      Rapid solution hardening at elevated temperatures by substitutional Re alloying in MoSi2

      ACTA MATERIALIA
    40. Nakano, T; Kishimoto, M; Furuta, D; Umakoshi, Y
      Effect of substitutational elements on plastic deformation behaviour of NbSi2-based silicide single crystals with C40 structure

      ACTA MATERIALIA
    41. Mitchell, TE
      A dislocation tetrahedron for MoSi2

      ACTA MATERIALIA
    42. Yamaguchi, M; Inui, H; Ito, K
      High-temperature structural intermetallics

      ACTA MATERIALIA
    43. Lee, SP; Yoon, HK
      Impact fracture characteristics on fabricating process of Nb/MoSi2 laminate composite (I)

      KSME INTERNATIONAL JOURNAL
    44. Lee, SP; Yoon, HK
      Improvement of impact properties for Nb/MoSi2 laminate composites by the interfacial modification (II)

      KSME INTERNATIONAL JOURNAL
    45. Bernard, F; Charlot, F; Gras, C; Gauthier, V; Gaffet, E
      In-situ time-resolved X-ray diffraction experiments applied to self-sustained reactions from mechanically activated mixtures

      JOURNAL DE PHYSIQUE IV
    46. Lee, SP; Yoshida, M; Fukunaga, H
      Interfacial modification and impact properties of Nb/MoSi2 laminate composites by the addition of ZrO2, NbSi2, and SiC particles

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    47. Matsuura, K; Hasegawa, T; Ohmi, T; Kudoh, M
      Synthesis of MoSi2-TiSi2 pseudobinary alloys by reactive sintering

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    48. Kramer, MJ; Okumus, SC; Besser, MF; Unal, O; Akinc, M
      Microstructure of a plasma-sprayed Mo-Si-B alloy

      JOURNAL OF THERMAL SPRAY TECHNOLOGY
    49. Vaidya, RU; Rangaswamy, P; Castro, RG; Petrovic, JJ; Butt, DP
      Use of metallic glasses in molybdenum disilicide-stainless steel joining

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    50. Petrovic, JJ
      Toughening strategies for MoSi2-based high temperature structural silicides

      INTERMETALLICS
    51. Liu, Y; Shao, G; Tsakiropoulos, P
      Thermodynamic reassessment of the Mo-Si and Al-Mo-Si systems

      INTERMETALLICS
    52. Gialanella, S; Lutterotti, L; Molinari, A; Kazior, J; Pieczonka, T
      Reaction-sintering of intermetallic alloys of the Ni-Al-Mo system

      INTERMETALLICS
    53. Perez, P; Lopez, MF; Jimenez, JA; Adeva, P
      Oxidation behaviour of Al-alloyed ZrSi2 at 700 degrees C

      INTERMETALLICS
    54. Lee, SH; Lee, JH; Lee, YH; Shin, DH; Kim, YS
      Effect of heating rate on the combustion synthesis of intermetallics

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    55. Chae, SW; Son, CH; Kim, YS
      Finite element analysis on the effect of Si phase melting in combustion synthesis of MoSi2

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    56. Fan, XB; Hack, K; Ishigaki, T
      Calculated C-MoSi2 and B-Mo5Si3 pseudo-binary phase diagrams for the use in advanced materials processing

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    57. La, PQ; Xue, QJ; Liu, WM
      A study of MoSi2-MoS2 coatings fabricated by SHS casting route

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    58. Park, YH; Haskimoto, H; Hahn, YD
      Microstructure and mechanical properties of MoSi2/Nb composites made by MA-pulse discharge sintering

      MATERIALS TRANSACTIONS JIM
    59. Lee, SP; Pan, J; Fukunaga, H
      Effect of interfacial shear strength on impact properties of Nb/MoSi2 laminate composites

      MATERIALS TRANSACTIONS JIM
    60. Narciso-Romero, FJ; Arpon-Carballo, R; Rodriguez-Reinoso, F; Komatsu, M
      Synthesis of a (MoSi2, Mo5Si3)/SiC composite using an in situ solid-state displacement reaction between Mo2C and Si

      JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
    61. Maglia, F; Anselmi-Tamburini, U; Bertolino, N; Milanese, C; Munir, ZA
      Synthesis of Cr-Si intermetallic compounds by field-activated combustion synthesis

      JOURNAL OF MATERIALS RESEARCH
    62. Waghmare, UV; Kaxiras, E; Duesbery, MS
      Modeling brittle and ductile behavior of solids from first-principles calculations

      PHYSICA STATUS SOLIDI B-BASIC RESEARCH
    63. Little, TW; Ohuchi, FS
      Chemical interaction of NF3 ion beams and plasmas with Si (Part I): X-ray photoelectron spectroscopy studies

      SURFACE SCIENCE
    64. Zhang, GJ; Yue, XM; Watanabe, T; Yagishita, O
      In situ synthesis of Mo(Si,Al)(2)-SiC composites

      JOURNAL OF MATERIALS SCIENCE
    65. Lee, SP; Sasaki, G; Fukunaga, H
      Effect of fabricating temperature and volume fraction of Nb sheet on impact properties of Nb/MoSi2-ZrO2 laminate composites

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    66. Wan, J
      Working life evaluation of MoSi2/oxide composite heating elements

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    67. Ramberg, CE; Worrell, WL
      Fabrication and high-temperature phase stability of Mo(Al,Si)(2)-MoSi2 intermetallics

      JOURNAL OF THE AMERICAN CERAMIC SOCIETY
    68. Li, J; Yang, GY; Zhu, J; Zhang, LQ; Yang, WY; Sun, ZQ
      Microstructural characterization of sintered MoSi2/SiCp composites

      JOURNAL OF THE AMERICAN CERAMIC SOCIETY
    69. Waghmare, UV; Bulatov, V; Kaxiras, E; Duesbery, MS
      < 331 > slip on {013} planes in molybdenum disilicide

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    70. Gras, CH; Charlot, F; Gaffet, E; Bernard, F; Niepce, JC
      In situ synchrotron characterization of mechanically activated self-propagating high-temperature synthesis applied in Mo-Si system

      ACTA MATERIALIA
    71. Ito, K; Yano, T; Nakamoto, T; Inui, H; Yamaguchi, M
      Plastic deformation of single crystals of WSi2 with the Cl1(b) structure

      ACTA MATERIALIA
    72. Gavens, AJ; van Heerden, D; Foecke, T; Weihs, TP
      Fabrication and evaluation of Nb/Nb5Si3 microlaminate foils

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    73. Liu, BX; Gao, KY; Zhu, HN
      Metal silicides synthesized by high current metal-ion implantation

      JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B
    74. Torri, P; Hirvonen, JP; Kung, H; Lu, YC; Nastasi, M; Gibson, PN
      Mechanical properties, stress evolution and high-temperature thermal stability of nanolayered Mo-Si-N/SiC thin films

      JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B
    75. Govindarajan, S; Suryanarayana, C; Moore, JJ; Disam, J
      Synthesis and characterization of a diffusion barrier layer for molybdenum

      JOURNAL OF ADVANCED MATERIALS
    76. Yao, Z; Stiglich, J; Sudarshan, TS
      Molybdenum silicide based materials and their properties

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    77. Chu, F; Thoma, DJ; McClellan, K; Peralta, P; He, Y
      Synthesis and properties of MO5Si3 single crystals

      INTERMETALLICS
    78. Mitra, R; Rao, VVR; Rao, AV
      Effect of small aluminum additions on microstructure and mechanical properties of molybdenum di-silicide

      INTERMETALLICS
    79. Shon, IJ; Kim, HC; Rho, DH; Munir, ZA
      Simultaneous synthesis and densification of Ti5Si3 and Ti5Si3-20 vol% ZrO2composites by field-activated and pressure-assisted combustion

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    80. Gras, C; Gaffet, E; Bernard, F; Niepce, JC
      Enhancement of self-sustaining reaction by mechanical activation: case of an Fe-Si system

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    81. Petrovic, JJ; Vasudevan, AK
      Key developments in high temperature structural silicides

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    82. Hebsur, MG
      Development and characterization of SiC(f)/MoSi2-Si3N4(p) hybrid composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    83. Chu, F; Thoma, DJ; McClellan, KJ; Peralta, P
      Mo5Si3 single crystals: physical properties and mechanical behavior

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    84. Tortorici, PC; Dayananda, MA
      Interdiffusion and diffusion structure development in selected refractory metal silicides

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    85. Ito, K; Matsuda, K; Shirai, Y; Inui, H; Yamaguchi, M
      Brittle-ductile behavior of single crystals of MoSi2

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    86. Mitchell, TE; Misra, A
      Structure and mechanical properties of (Mo, Re)Si-2 alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    87. Umakoshi, Y; Nakano, T; Kishimoto, K; Furuta, D; Hagihara, K; Azuma, M
      Strength and deformation mechanism of C40-based single crystal and polycrystalline silicides

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    88. Inui, H; Nakamoto, T; Ishikawa, K; Yamaguchi, M
      Plastic deformation of single crystals of (Mo1-XWX)Si-2 with the C11(b) structure

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    89. Guder, S; Bartsch, M; Yamaguchi, M; Messerschmidt, U
      Dislocation processes during the deformation of MoSi2 single crystals in asoft orientation

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    90. Waghmare, UV; Bulatov, V; Kaxiras, E; Duesbery, MS
      Microalloying for ductility in molybdenum disilicide

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    91. Baskes, MI
      Atomistic potentials for the molybdenum-silicon system

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    92. Stoloff, NS
      An overview of powder processing of silicides and their composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    93. Scholl, R; Bohm, A; Kieback, B
      Fabrication of silicide materials and their composites by reaction sintering

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    94. Sadananda, K; Feng, CR; Mitra, R; Deevi, SC
      Creep and fatigue properties of high temperature silicides and their composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    95. Chen, JX; Li, CH; Fu, Z; Tu, XY; Sundberg, M; Pompe, R
      Low temperature oxidation behavior of a MoSi2-based material

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    96. Peralta, P; Dickerson, R; Michael, JR; McClellan, KJ; Chu, F; Mitchell, TE
      Residual thermal stresses in MoSi2-Mo5Si3 in-situ composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    97. Park, YS; Butt, DP; Castro, R; Petrovic, J; Johnson, W
      Durability of molybdenum disilicide in molten alkali borosilicate glass

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    98. Kurokawa, K; Houzumi, H; Saeki, I; Takahashi, H
      Low temperature oxidation of fully dense and porous MoSi2

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    99. Kowalik, RW; Hebsur, MG
      Cyclic oxidation study of MoSi2-Si3N4 base composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    100. Dusza, J; Steinkellner, W; Kromp, K; Steen, M
      Effect of high temperature heat-treatments on the strength of molybdenum disilicide

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 07/08/20 alle ore 03:33:44