Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'MILLING' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 1013 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. RODRIGUES NETO J B; MORENO R
      Effect of mechanical activation on the rheology and casting performance of kaolin/talc/alumina suspensions for manufacturing dense cordierite bodies

      Applied clay science
    2. Li, HZ; Li, XP
      Milling force prediction using a dynamic shear length model

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    3. Ismail, F; Ziaei, R
      Chatter suppression in five-axis machining of flexible parts

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    4. Dijkink, BH; Langelaan, HC
      Milling properties of peas in relation to texture analysis. Part 1. Effectof moisture content

      JOURNAL OF FOOD ENGINEERING
    5. Dijkink, BH; Langelaan, HC
      Milling properties of peas in relation to texture analysis. Part II. Effect of pea genotype

      JOURNAL OF FOOD ENGINEERING
    6. Prabhasankar, P; Rao, PH
      Effect of different milling methods on chemical composition of whole wheatflour

      EUROPEAN FOOD RESEARCH AND TECHNOLOGY
    7. Larson, DJ; Wissman, BD; Martens, RL; Viellieux, RJ; Kelly, TF; Gribb, TT; Erskine, HF; Tabat, N
      Advances in atom probe specimen fabrication from planar multilayer thin film structures

      MICROSCOPY AND MICROANALYSIS
    8. Balachandran, B
      Nonlinear dynamics of milling processes

      PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
    9. Xu, Q; Hayes, RW; Lavernia, EJ
      Creep properties of ball-milled and HIPed pure tantalum

      SCRIPTA MATERIALIA
    10. Hidaka, H; Tsuchiyama, T; Takaki, S
      Relation between microstructure and hardness in Fe-C alloys with ultra fine grained structure

      SCRIPTA MATERIALIA
    11. Hwang, S; Nishimura, C; McCormick, PG
      Deformation mechanism of nanocrystalline magnesium in compression

      SCRIPTA MATERIALIA
    12. Botta, WJ; Tomasi, R; Pallone, EMJA; Yavari, AR
      Nanostructured composites obtained by reactive milling

      SCRIPTA MATERIALIA
    13. Umemoto, M; Liu, ZG; Masuyama, K; Hao, XJ; Tsuchiya, K
      Nanostructured Fe-C alloys produced by ball milling

      SCRIPTA MATERIALIA
    14. Liu, ZG; Hao, XJ; Masuyama, K; Tsuchiya, K; Umemoto, M; Hao, SM
      Nanocrystal formation in a ball milled eutectoid steel

      SCRIPTA MATERIALIA
    15. Zhou, F; Lee, J; Lavernia, EJ
      Grain growth kinetics of a mechanically milled nanocrystalline Al

      SCRIPTA MATERIALIA
    16. Lee, JS; Lee, CS; Oh, ST; Kim, JG
      Phase evolution of Fe2O3 nanoparticle during high energy ball milling

      SCRIPTA MATERIALIA
    17. Kong, LB; Ma, J; Zhu, W; Tan, OK
      Reaction sintering of partially reacted system for PZT ceramics via a high-energy ball milling

      SCRIPTA MATERIALIA
    18. Baviera, P; Harel, S; Garem, H; Grosbras, M
      Elaboration and structure of nanostructured TiC: A XRD and HRTEM study

      SCRIPTA MATERIALIA
    19. Bohn, R; Klassen, T; Bormann, R
      Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range

      ACTA MATERIALIA
    20. Lucks, I; Lamparter, P; Mittemeijer, EJ
      Uptake of iron, oxygen and nitrogen in molybdenum during ball milling

      ACTA MATERIALIA
    21. Eneje, LO; Obiekezie, SO; Aloh, CU; Agu, RC
      Effect of milling and mashing procedures on millet (Pennisetum maiwa) maltwort properties

      PROCESS BIOCHEMISTRY
    22. Phuc, BHN; Lindberg, JE
      Ileal apparent digestibility of amino acids in growing pigs given a cassava root meal diet with inclusion of cassava leaves, leucaena leaves and groundnut foliage

      ANIMAL SCIENCE
    23. Oelerich, W; Klassen, T; Bormann, R
      Mg-based hydrogen storage materials with improved hydrogen sorption

      MATERIALS TRANSACTIONS
    24. Tsuzuki, T; McCormick, PG
      Mechanochemical synthesis of niobium pentoxide nanoparticles

      MATERIALS TRANSACTIONS
    25. Nagashima, M; Maki, K; Hayakawa, M
      Fabrication of Al2O3/ZrO2 micro/nano-composite prepared by high energy ball milling

      MATERIALS TRANSACTIONS
    26. Altintas, Y
      Analytical prediction of three dimensional chatter stability in milling

      JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING
    27. Hino, J; Su, CX; Yoshimura, T
      A study on chatter prediction in high-speed end milling process by fuzzy neural network

      JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING
    28. Chaffron, L; Le Bouar, Y; Martin, G
      Driven phase transformations: A useful concept for wear studies?

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE IV PHYSIQUE ASTROPHYSIQUE
    29. Flis, M; Sobotka, W; Jakubowski, K; Mieszkalski, L; Czarnyszewicz, Z; Anders, A
      The nutritional value of differently prepared barley in growing-finishing pigs

      JOURNAL OF ANIMAL AND FEED SCIENCES
    30. Thibert, R; Hancock, BC
      The effects of milling upon the physicochemical properties and functional behavior of some disintegrants

      STP PHARMA SCIENCES
    31. Cui, XL; Wang, YH; Wang, L; Cui, LS; Qi, M
      Synthesis of nanometer-sized TiC and SiC from petroleum coke by reactive milling

      PETROLEUM SCIENCE AND TECHNOLOGY
    32. Fussell, BK; Jerard, RB; Hemmett, JG
      Robust feedrate selection for 3-axis NC machining using discrete models

      JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
    33. He, M; Yi, XJ; Cheng, ZH; Liu, LQ; Wang, YR
      Fabrication of GaAs microlenses array with long focal length for improvingresponsivity of PtSiIRFPA device

      JOURNAL OF INFRARED AND MILLIMETER WAVES
    34. Dong, J; Shen, WC; Hu, XF; Zhang, BF; Liu, X; Kang, FY; Gu, JL; Chen, NP
      A kind of carbon whiskers in new structure and morphology

      SCIENCE IN CHINA SERIES B-CHEMISTRY
    35. Charbonnaud, P; Carrillo, FJ; Ladeveze, D
      Monitored robust force control of a milling process

      CONTROL ENGINEERING PRACTICE
    36. Bohn, R; Klassen, T; Bormann, R
      Mechanical behavior of submicron-grained gamma-TiAl-based alloys at elevated temperatures

      INTERMETALLICS
    37. Gauthier, V; Bernard, F; Gaffet, E; Munir, ZA; Larpin, JP
      Synthesis of nanocrystalline NbAl3 by mechanical and field activation

      INTERMETALLICS
    38. Fanta, G; Bohn, R; Dahms, M; Klassen, T; Bormann, R
      The effect of ultrafine grained microstructures on the hot-workability of intermetallic/ceramic composites based on gamma-TiAl

      INTERMETALLICS
    39. Liu, KW; Mucklich, F; Birringer, R
      Synthesis of nano-RuAl by mechanical alloying

      INTERMETALLICS
    40. Chen, Z; Wang, Q
      Pan-milling mixing - a novel approach to forming polymer blends and controlling their morphology

      POLYMER INTERNATIONAL
    41. Andersson, JE; Johansson, G
      Robot control for wood carving operations

      MECHATRONICS
    42. Maschio, S; Piras, A; Schmid, C; Lucchini, E
      Effects of attrition milling on precursors of Al2O3 and 12Ce-TZP powders

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    43. Li, JL; Li, F; Hu, K; Zhou, Y
      TiB2/TiC nanocomposite powder fabricated via high energy ball milling

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    44. Moure, A; Pardo, L; Alemany, C; Millan, P; Castro, A
      Piezoelectric ceramics based on Bi3TiNbO9 from mechano chemically activated precursors

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    45. Mizuno, Y; Hagiwara, T; Chazono, H; Kishi, H
      Effect of milling process on core-shell microstructure and electrical properties for BaTiO3-based Ni-MLCC

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    46. Nikolic, N; Sreckovic, T; Ristic, MM
      The influence of mechanical activation on zinc stannate spinel formation

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    47. Beckett, ST
      Milling, mixing and tempering - an engineering view of chocolate

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
    48. de Lacalle, LNL; Lamikiz, A; Sanchez, JA; Cabanes, I
      Cutting conditions and tool optimization in the high-speed milling of aluminium alloys

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    49. Bacaria, JL; Dalverny, O; Caperaa, S
      A three-dimensional transient numerical model of milling

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    50. Koshy, P; Aspinwall, DK; Dewes, RC
      A composite tool for ball endmilling

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    51. Vafaeesefat, A; ElMaraghy, HA
      Rough pocketing of multi-sculptured surface cavities

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    52. Prickett, PW; Johns, C
      The development of an on-line milling cutter tooth breakage detection system

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    53. Dean, JM; Chun, W; Jen, HW; Benson, DA; McCabe, RW; Graham, GW
      Modification of low-grade ceria by high-energy mechanical milling: changesin phase composition, reducibility, and oxygen storage capacity

      APPLIED CATALYSIS A-GENERAL
    54. Principi, G; Spataru, T; Gupta, R; Enzo, S; Kuncser, V; Filoti, G
      Mechanically alloyed Cu-Fe studied by Mossbauer spectroscopy

      JOURNAL OF ALLOYS AND COMPOUNDS
    55. Bid, S; Banerjee, A; Kumar, S; Pradhan, SK; De, UY; Banerjee, D
      Nanophase iron oxides by ball-mill grinding and their Mossbauer characterization

      JOURNAL OF ALLOYS AND COMPOUNDS
    56. Inoue, H; Miyauchi, R; Tanaka, T; Choi, WK; Shin-Ya, R; Murayama, JI; Iwakura, C
      Effect of ball-milling with Ni and Raney Ni on surface structural characteristics of TiV2.1Ni0.3 alloy

      JOURNAL OF ALLOYS AND COMPOUNDS
    57. Kim, HG; Myung, WN; Sumiyama, K; Suzuki, K
      Formation of a non-equilibrium nanocrystalline phase by chemical leaching of rod-milled Al-0.6(Fe50Cu50) alloy

      JOURNAL OF ALLOYS AND COMPOUNDS
    58. Krasnowski, M; Matyja, H
      Structural investigations of the Al50Fe25Ti25 powder mixture mechanically alloyed under various conditions

      JOURNAL OF ALLOYS AND COMPOUNDS
    59. Gialanella, S; Lutterotti, L
      Metastable structures in alpha-beta ' brass

      JOURNAL OF ALLOYS AND COMPOUNDS
    60. Choi, JH; Moon, KI; Kim, JK; Oh, YM; Suh, JH; Kim, SJ
      Consolidation behavior of nanocrystalline Al-5at.%Ti alloys synthesized bycryogenic milling

      JOURNAL OF ALLOYS AND COMPOUNDS
    61. Oelerich, W; Klassen, T; Bormann, R
      Metal oxides as catalysts for improved hydrogen sorption in nanocrystalline Mg-based materials

      JOURNAL OF ALLOYS AND COMPOUNDS
    62. Cao, W; Tan, OK; Zhu, W; Jiang, B; Reddy, CVG
      An amorphous-like x alpha-(FeO3)-O-2-(1-x)ZrO2 solid solution system for low temperature resistive-type oxygen sensing

      SENSORS AND ACTUATORS B-CHEMICAL
    63. Gill, JJ; Chang, DT; Momoda, LA; Carman, GP
      Manufacturing issues of thin film NiTi microwrapper

      SENSORS AND ACTUATORS A-PHYSICAL
    64. Phillips, GN; Eisenberg, M; Persat, N; Draaisma, EA; Abelmann, L; Lodder, JC
      Scanning magneto-resistance microscopy with FIB trimmed yoke-type magneto-resistive tape heads

      SENSORS AND ACTUATORS A-PHYSICAL
    65. Lai, WS; Greenway, B; Faddis, T
      Flute engagement in peripheral milling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    66. Tsai, YC; Hsieh, JM
      A study of a design and NC manufacturing model of ball-end cutters

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    67. Ma, ML; Liu, XK; Xi, SQ; Chai, DL; Zhou, J
      Effect of material characteristics on the ignition of the combustion reactions induced by ball milling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    68. Vieira, JM; Machado, AR; Ezugwu, EO
      Performance of cutting fluids during face milling of steels

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    69. Jawaid, A; Koksal, S; Sharif, S
      Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    70. Rahman, M; Kumar, AS; Prakash, JRS
      Micro milling of pure copper

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    71. Muller, H; Sladojevic, J
      Rapid tooling approaches for small lot production of sheet-metal parts

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    72. Mookherjee, R; Bhattacharyya, B
      Development of an expert system for turning and rotating tool selection ina dynamic environment

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    73. Li, HZ; Liu, K; Li, XP
      A new method for determining the undeformed chip thickness in milling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    74. Law, KMY; Geddam, A
      Prediction of contour accuracy in the end milling of pockets

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    75. Lee, KY; Kang, MC; Jeong, YH; Lee, DW; Kim, JS
      Simulation of surface roughness and profile in high-speed end milling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    76. Kita, Y; Furuike, H; Kakino, Y; Nakagawa, H; Hirogaki, T
      Basic study of ball end milling on hardened steel

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    77. Lee, SK; Ko, SL
      Improvement of the accuracy in the machining of a deep shoulder cut by endmilling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    78. Sarhan, A; Sayed, R; Nassr, AA; El-Zahry, RM
      Interrelationships between cutting force variation and tool wear in end-milling

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    79. D'Errico, GE
      Fuzzy control systems with application to machining processes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    80. Sakurai, K; Guo, XM
      Mechanical solid-state formation of Y(1-x)Ce(x)Al0(3) and its application as an X-ray scintillator

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    81. Castricum, HL; Bakker, H; Poels, EK
      Oxidation and reduction in copper/zinc oxides by mechanical milling

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    82. Chattopadhyay, PP; Pabi, SK; Manna, I
      A metastable allotropic transformation in Nb induced by planetary ball milling

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    83. Takacs, L; Mandal, SK
      Preparation of some metal phosphides by ball milling

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    84. Varghese, V; Sharma, A; Chattopadhyay, K
      Reaction ball milling of systems involving ionic bonds

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    85. Chinnasamy, CN; Narayanasamy, A; Ponpandian, N; Chattopadhyay, K
      The influence of Fe3+ ions at tetrahedral sites on the magnetic propertiesof nanocrystalline ZnFe2O4

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    86. Yang, XY; Huang, ZW; Wu, YK; Ye, HQ
      HREM observations of the synthesized process of nano-sized SiC by ball milling of Si and C mixed powders

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    87. Stubicar, M; Blazina, Z; Tonejc, A; Stubicar, N; Krumes, D
      The effect of high energy ball milling on the crystal structure of GDNi(5)

      PHYSICA B
    88. Yin, J; Umemoto, M; Liu, ZG; Tsuchiya, K
      Formation mechanism and annealing behavior of nanocrystalline ferrite in pure Fe fabricated by ball milling

      ISIJ INTERNATIONAL
    89. Tatsumisago, M
      Preparation and characterization of amorphous based solid electrolytes

      JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
    90. Apelt, TA; Asprey, SP; Thornhill, NF
      Inferential measurement of SAG mill parameter'

      MINERALS ENGINEERING
    91. Abd El-Rahman, MK; Mishra, BK; Rajamani, RK
      Industrial tumbling mill power prediction using the discrete element method

      MINERALS ENGINEERING
    92. Portman, VT; Sandler, BZ; Zahavi, E
      Rigid 6-DOF parallel platform for precision 3-D micromanipulation

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    93. Hinduja, S; Roaydi, A; Philimis, P; Barrow, G
      Determination of optimum cutter diameter for machining 21/2-O pockets

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    94. Baek, DK; Ko, TJ; Kim, HS
      Optimization of feedrate in a face milling operation using a surface roughness model

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    95. El-Khabeery, MM; El-Axir, MH
      Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    96. Rao, B; Shin, YC
      Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    97. Shatla, M; Kerk, C; Altan, T
      Process modeling in machining. Part II: validation and applications of thedetermined flow stress data

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    98. Wang, GC; Fuh, KH; Yan, BH
      A new mathematical model for multifacet drills derived by using angle-solid model

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    99. Abdul-Razzaq, W; Wu, M
      Magnetic properties of ball-milled Mn nanoparticles

      SUPERLATTICES AND MICROSTRUCTURES
    100. Steadman, KJ; Burgoon, MS; Lewis, BA; Edwardson, SE; Obendorf, RL
      Buckwheat seed milling fractions: Description, macronutrient composition and dietary fibre

      JOURNAL OF CEREAL SCIENCE


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 20/01/21 alle ore 18:59:14