Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'MICROSTRUCTURE' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 11381 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. MONTEIRO S N; SILVA F A N; VIEIRA C M F
      Microstructural evaluation of a clay ceramic incorporated with petroleum waste

      Applied clay science
    2. IMBERT Christophe; VILLAR M Victoria
      Hydro-mechanical response of a bentonite pellets/powder mixture upon infiltration

      Applied clay science
    3. CANTISANI Emma; FRATINI Fabio; MALESANI Piergiorgio; MOLLI Giancarlo
      Mineralogical and petrophysical characterisation of white Apuan marble

      Periodico di mineralogia
    4. COSENZA Ph; TABBAG A
      Electromagnetic determination of clay water content: role of the microporosity

      Applied clay science
    5. PUSCH R; WESTON R
      Microstructural stability controls the hydraulic conductivity of smectitic buffer clay

      Applied clay science
    6. OUHADI V R; YONG R N
      Impact of clay microstructure and mass absorption coefficient on the quantitative mineral identification by XRD analysis

      Applied clay science
    7. Boccaccini, AR; Winkler, V
      Fracture surface roughness and toughness of Al2O3-platelet reinforced glass matrix composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    8. Michalet, T; Parlier, M; Beclin, F; Duclos, R; Crampon, J
      Elaboration of low shrinkage mullite by active filler controlled pyrolysisof siloxanes

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    9. Wu, YQ; Zhang, YF; Pezzotti, G; Guo, JK
      Effect of glass additives on the strength and toughness of polycrystallinealumina

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    10. Larrea, A; de la Fuente, GF; Merino, RI; Orera, VM
      ZrO2-Al2O3 eutectic plates produced by laser zone melting

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    11. Zhang, TS; Hing, P; Huang, HT; Kilner, J
      Sintering and grain growth of CoO-doped CeO2 ceramics

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    12. Fang, TT; Shiue, JT; Liou, SC
      Formation mechanism and sintering behavior of Ba2Ti9O20

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    13. Kurama, S; Herrmann, M; Mandal, H
      The effect of processing conditions, amount of additives and composition on the microstructures and mechanical properties of alpha-SiAlON ceramics

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    14. Chandler, HW; Merchant, IJ; Henderson, RJ; Macphee, DE
      Enhanced crack-bridging by unbonded inclusions in a brittle matrix

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    15. Kharton, VV; Kovalevsky, A; Yaremchenko, AA; Figueiredo, FM; Naumovich, EN; Shaulo, AL; Marques, FMB
      Surface modification of La0.3Sr0.7C0O3-delta ceramic membranes

      JOURNAL OF MEMBRANE SCIENCE
    16. CUEVAS J; VILLAR M V; MARTIN M; COBENA J C; LEGUEY S
      Thermo-hydraulic gradients on bentonite: distribution of soluble salts, microstructure and modification of the hydraulic and mechanical behaviour

      Applied clay science
    17. Lin, JHC; Chen, KI; Ju, CP
      Particle size effect on structure and properties of dispersed Pd-containing dental amalgam

      BIOMATERIALS
    18. Ghiass, M; Rey, AD; Dabir, B
      Microstructure evolution and simulation of copolymerization reaction usinga percolation kinetic gelation model

      POLYMER
    19. Devaux, X; Brochin, F; Martin-Lopez, R; Scherrer, H
      Study of the microstructure influence on the transport properties of Bi86.5Sb13.5 polycrystalline alloy

      JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
    20. Blom, EJ; Klein-Nulend, J; Wolk, JGC; van Waas, MAJ; Driessens, FCM; Burger, EH
      Transforming growth factor-beta 1 incorporation in a calcium phosphate bone cement: Material properties and release characteristics

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    21. Ergun, C; Webster, TJ; Bizios, R; Doremus, RH
      Hydroxylapatite with substituted magnesium, zinc, cadmium, and yttrium. I.Structure and microstructure

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    22. Cai, WS; Gupta, RB
      Fast-responding bulk hydrogels with microstructure

      JOURNAL OF APPLIED POLYMER SCIENCE
    23. Seco, FJ; Irisarri, AM
      Creep failure mechanisms of a Ti-6Al-4V thick plate

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    24. Thibaut, B; Gril, J; Fournier, W
      Mechanics of wood and trees: some new highlights for an old story

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    25. Klimenko, IV; Korolev, YM; Zhuravleva, TS
      X-ray study of brominated pitch-based carbon fibers

      POLYMER SCIENCE SERIES B
    26. Fritzsche, H
      Development in understanding and controlling the Staebler-Wronski effect in a-Si : H

      ANNUAL REVIEW OF MATERIALS RESEARCH
    27. Furnes, H; Staudigel, H; Thorseth, IH; Torsvik, T; Muehlenbachs, K; Tumyr, O
      Bioalteration of basaltic glass in the oceanic crust

      GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS
    28. Pang, JHL; Tan, KH; Shi, XQ; Wang, ZP
      Thermal cycling aging effects on microstructural and mechanical propertiesof a single PBGA solder joint specimen

      IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    29. Filali, M; Ouazzani, MJ; Michel, E; Aznar, R; Porte, G; Appell, J
      Robust phase behavior of model transient networks

      JOURNAL OF PHYSICAL CHEMISTRY B
    30. Peigney, A; Coquay, P; Flahaut, E; Vandenberghe, RE; De Grave, E; Laurent, C
      A study of the formation of single- and double-walled carbon nanotubes by a CVD method

      JOURNAL OF PHYSICAL CHEMISTRY B
    31. Burojeanu, VM; Fournes, L; Wattiaux, A; Etourneau, J; Segal, E
      Cations distribution and magnetic properties of manganese ferrite powder prepared by coprecipitation from MnO2 and FeSO4 center dot 7H(2)O

      INTERNATIONAL JOURNAL OF INORGANIC MATERIALS
    32. Plesch, G; Hanic, F; Cigan, A; Manka, J; Buckuliakova, A; Buchta, S
      Microstructure and superconducting properties of melt textured Y-Ba-Cu-(Ag)-O composites with various Ag content

      INTERNATIONAL JOURNAL OF INORGANIC MATERIALS
    33. Dasgupta, N; Krishnamoorthy, R; Jacob, KT
      Glycol-nitrate combustion synthesis of fine sinter-active yttria

      INTERNATIONAL JOURNAL OF INORGANIC MATERIALS
    34. Beckers, JVL; de Leeuw, SW
      Fractal structure and specific surface of nanoporous silica

      INTERNATIONAL JOURNAL OF INORGANIC MATERIALS
    35. Winstone, MR; Partridge, A; Brooks, JW
      The contribution of advanced high-temperature materials to future aero-engines

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    36. Munsi, ASMY; Waddell, AJ; Walker, CA
      The effect of vibratory stress on the welding microstructure and residual stress distribution

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    37. Wurtz, J; Meyer, J; Hoffmann, H
      Studies on the phase behavior of perfluoropolyether carboxylic acids and their salts: Observation of a stunning temperature-dependent color effect for the birefringence in the pyridinium salt system

      PHYSICAL CHEMISTRY CHEMICAL PHYSICS
    38. Grumel, V; Brull, R; Pasch, H; Raubenheimer, HG; Sanderson, R; Wahner, UM
      Homopolymerization of higher 1-olefins with metallocene/MAO catalysts

      MACROMOLECULAR MATERIALS AND ENGINEERING
    39. Llorca, E; Hernando, I; Perez-Munuera, I; Fiszman, SM; Lluch, MA
      Effect of frying on the microstructure of frozen battered squid rings

      EUROPEAN FOOD RESEARCH AND TECHNOLOGY
    40. Wang, H; Dinwiddie, RB
      Characterization of thermal barrier coatings using thermal methods

      ADVANCED ENGINEERING MATERIALS
    41. Hong, SI
      Copper-iron filamentary microcomposites

      ADVANCED ENGINEERING MATERIALS
    42. Muto, S; Yamanaka, T; Lee, HN; Johnson, DR; Inui, H; Yamaguchi, M
      Directional solidification of TiAl-based alloys and properties of directionally solidified ingots

      ADVANCED ENGINEERING MATERIALS
    43. Kumpfert, J
      Intermetallic alloys based on orthorhombic titanium aluminide

      ADVANCED ENGINEERING MATERIALS
    44. Mancktelow, NS; Stockli, DF; Grollimund, B; Muller, W; Fugenschuh, B; Viola, G; Seward, D; Villa, IM
      The DAV and Periadriatic fault systems in the Eastern Alps south of the Tauern window

      INTERNATIONAL JOURNAL OF EARTH SCIENCES
    45. White, SR
      Textural and microstructural evidence for semi-brittle flow in natural fault rocks with varied mica contents

      INTERNATIONAL JOURNAL OF EARTH SCIENCES
    46. Rosenberg, CL
      Deformation of partially molten granite: a review and comparison of experimental and natural case studies

      INTERNATIONAL JOURNAL OF EARTH SCIENCES
    47. Hirth, G; Teyssier, C; Dunlap, WJ
      An evaluation of quartzite flow laws based on comparisons between experimentally and naturally deformed rocks

      INTERNATIONAL JOURNAL OF EARTH SCIENCES
    48. Olsson, T; Megnis, M; Varna, J; Lindberg, H
      Measurement of the uptake of linseed oil in pine by the use of an X-ray microdensitometry technique

      JOURNAL OF WOOD SCIENCE
    49. Olsson, T; Megnis, M; Varna, J; Lindberg, H
      Study of the transverse liquid flow paths in pine and spruce using scanning electron microscopy

      JOURNAL OF WOOD SCIENCE
    50. Mezzetti, E; Chiodoni, A; Gerbaldo, R; Ghigo, G; Gozzelino, L; Minetti, B; Camerlingo, C; Giannini, C
      Nanosize patterns as reference structures for macroscopic transport properties and vortex phases in YBCO films

      EUROPEAN PHYSICAL JOURNAL B
    51. Zhou, YC; Wang, XH
      Deformation of polycrystalline Ti2AlC under compression

      MATERIALS RESEARCH INNOVATIONS
    52. Waku, Y; Sakata, S; Mitani, A; Shimizu, K
      A novel oxide composite reinforced with a ductile phase for very high temperature structural materials

      MATERIALS RESEARCH INNOVATIONS
    53. Hosokawa, H; Higashi, K
      Materials design for industrial forming process in high-strain-rate superplastic Al-Si alloy

      MATERIALS RESEARCH INNOVATIONS
    54. Przybylski, K; Brylewski, T; Morawski, A; Lada, T
      Ba2Ca2Cu3Ox precursor effects on synthesis of (Hg,Pb)Ba2Ca2Cu3O8+delta superconductor

      JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
    55. Braun, A; Seifert, S; Thiyagarajan, P; Cramer, SP; Cairns, EJ
      In situ anomalous small angle X-ray scattering and absorption on an operating rechargeable lithium ion battery cell

      ELECTROCHEMISTRY COMMUNICATIONS
    56. Gui, Z; Fan, R; Chen, XH; Wu, YC
      A simple direct preparation of nanocrystalline gamma-Mn2O3 at ambient temperature

      INORGANIC CHEMISTRY COMMUNICATIONS
    57. Au, LTY; Mui, WY; Lau, PS; Ariso, CT; Yeung, KL
      Engineering the shape of zeolite crystal grain in MFI membranes and their effects on the gas permeation properties

      MICROPOROUS AND MESOPOROUS MATERIALS
    58. Pan, M; Lin, YS
      Template-free secondary growth synthesis of MFI type zeolite membranes

      MICROPOROUS AND MESOPOROUS MATERIALS
    59. Wan, YSS; Chau, JLH; Gavriilidis, A; Yeung, KL
      Design and fabrication of zeolite-based microreactors and membrane microseparators

      MICROPOROUS AND MESOPOROUS MATERIALS
    60. Bonilla, G; Vlachos, DG; Tsapatsis, M
      Simulations and experiments on the growth and microstructure of zeolite MFI films and membranes made by secondary growth

      MICROPOROUS AND MESOPOROUS MATERIALS
    61. Guillemot, F; Debuigne, J; Ansel, D
      High temperature oxidation of a new alpha+beta titanium alloy

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE C-CHIMIE
    62. Zhao, DL; Zhao, HS; Zhou, WC
      Dielectric properties of nano Si/C/N composite powder and nano SiC powder at high frequencies

      PHYSICA E
    63. Lockwood, DJ; Grom, GF; Tsybeskov, L; Fauchet, PM; Labbe, HJ; McCaffrey, JP; White, B
      Self-organization and ordering in nanocrystalline Si/SiO2 superlattices

      PHYSICA E
    64. Yokota, T; Fujimura, N; Morinaga, Y; Ito, T
      Detailed structural analysis of Ce doped Si thin films

      PHYSICA E
    65. Pan, XQ; Fu, L
      Tin oxide thin films grown on the ((1)over-bar012) sapphire substrate

      JOURNAL OF ELECTROCERAMICS
    66. Ott, J; Lorenz, A; Harrer, M; Preissner, EA; Hesse, C; Feltz, A; Whitehead, AH; Schreiber, M
      The influence of Bi2O3 and Sb2O3 on the electrical properties of ZnO-basedvaristors

      JOURNAL OF ELECTROCERAMICS
    67. Lorenz, A; Ott, J; Harrer, M; Preissner, EA; Whitehead, AH; Schreiber, M
      Modified citrate gel techniques to produce ZnO-based varistors (Part I - Microstructural characterisation)

      JOURNAL OF ELECTROCERAMICS
    68. Sogard, SM; Able, KW; Hagan, SM
      Long-term assessment of settlement and growth of juvenile winter flounder (Pseudopleuronectes americanus) in New Jersey estuaries

      JOURNAL OF SEA RESEARCH
    69. Mukasyan, AS; Costello, C; Sherlock, KP; Lafarga, D; Varma, A
      Perovskite membranes by aqueous combustion synthesis: synthesis and properties

      SEPARATION AND PURIFICATION TECHNOLOGY
    70. Cornelius, C; Hibshman, C; Marand, E
      Hybrid organic-inorganic membranes

      SEPARATION AND PURIFICATION TECHNOLOGY
    71. Dkaki, M; Calcagno, L; Makthari, AM; Raineri, V
      Infrared spectroscopy and transmission electron microscopy of polycrystalline silicon carbide

      MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
    72. Attia, H; Kherouatou, N; Dhouib, A
      Dromedary milk lactic acid fermentation: microbiological and rheological characteristics

      JOURNAL OF INDUSTRIAL MICROBIOLOGY & BIOTECHNOLOGY
    73. Jumah, RY; Shaker, RR; Abu-Jdayil, B
      Effect of milk source on the rheological properties of yogurt during the gelation process

      INTERNATIONAL JOURNAL OF DAIRY TECHNOLOGY
    74. Bright, AN; Humphreys, CJ
      Identification of interfacial layers in Ohmic contacts to n-type GaN and AlxGa1-xN/GaN heterostructures using high-resolution electron microscopy

      PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICSELECTRONIC OPTICAL AND MAGNETIC PROPERTIES
    75. Riviere, A
      Anomalous internal-friction peaks observed in very-high-purity aluminium

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    76. Jacques, P; Furnemont, Q; Mertens, A; Delannay, F
      On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    77. Nakano, T; Biermann, H; Riemer, M; Mughrabi, H; Nakai, Y; Umakoshi, Y
      Classification of gamma-gamma and gamma-alpha(2) lamellar boundaries on the basis of continuity of strains and slip-twinning planes in fatigued TiAl polysynthetically twinned crystals

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    78. Al-Khafaji, MA; Ahmad, I; Rainforth, WM; Davies, HA; Buckley, RA
      Investigation of the phase constitution and structure of rapidly solidified hard magnetic Nd18Fe76B6 ribbons by transmission electron microscopy

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    79. Senz, S; Blum, W; Hesse, D
      The effect of stress on cubic-to-tetragonal phase transitions in Mg2TiO4 and Mg2GeO4 spinel films

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    80. Cho, SH; Okane, T; Umeda, T
      CA-DFD analysis of nucleation parameter effects on the grain structures ofcastings

      INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
    81. Bedolla-Jacuinde, A
      Microstructure of vanadium-, niobium- and titanium-alloyed high-chromium white cast irons

      INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
    82. Boeri, R; Sikora, J
      Solidification macrostructure of spheroidal graphite cast iron

      INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
    83. Reddy, GM; Mohandas, T; Chandreshekar, K
      Observations on welding of alpha(2)+O+beta titanium aluminide

      SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
    84. Papakonstantinou, CG; Balaguru, P; Lyon, RE
      Comparative study of high temperature composites

      COMPOSITES PART B-ENGINEERING
    85. Vejen, N; Pyrz, R
      Transverse crack growth in glass/epoxy composites with exactly positioned long fibres. Part I: experimental

      COMPOSITES PART B-ENGINEERING
    86. Chung, PW; Tamma, KK; Namburu, RR
      Asymptotic expansion homogenization for heterogeneous media: computationalissues and applications

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    87. Khondker, OA; Leong, KH; Herszberg, I
      Study of composite compressive properties due to biaxial deformation of the weft-knitted glass fabrics

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    88. McHugh, AJ; Doufas, AK
      Modeling flow-induced crystallization in fiber spinning

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    89. McHugh, AJ; Walberer, JA
      Rheology and structuring in organo-ceramic composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    90. Wilson, DM; Visser, LR
      High performance oxide fibers for metal and ceramic composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    91. Kim, YJ; Chung, H; Kang, SJL
      In situ formation of titanium carbide in titanium powder compacts by gas-solid reaction

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    92. Wang, YS; Zhang, XY; Zeng, GT; Li, FC
      In situ production of Fe-VC and Fe-TiC surface composites by cast-sintering

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    93. Hussain, M; Choa, YH; Niihara, K
      Fabrication process and electrical behavior of novel pressure-sensitive composites

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    94. Li, TQ; Zhang, MQ; Zeng, HM
      Processing dependent morphology, interfacial interaction and shear behavior of short carbon fiber reinforced PEEK

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    95. Purnell, P; Short, NR; Page, CL
      Super-critical carbonation of glass-fibre reinforced cement. Part 1: mechanical testing and chemical analysis

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    96. Ageorges, C; Ye, L
      Resistance welding of thermosetting composite/thermoplastic composite joints

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    97. Tada, M; Uozumi, T; Nakai, A; Hamada, H
      Structure and machine braiding procedure of coupled square braids with various cross sections

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    98. Garces, G; Perez, P; Adeva, P
      Precipitation hardening of Mg-12%Ti (wt.%) synthetised by physical vapour deposition

      SCRIPTA MATERIALIA
    99. Miyake, A
      New criterion on zener pinning in 2-D systems

      SCRIPTA MATERIALIA
    100. Palanichamy, P; Mathew, MD; Latha, S; Jayakumar, T; Bhanu, K; Rao, SK; Mannan, SL; Raj, B
      Assessing microstructural changes in alloy 625 using ultrasonic waves and correlation with tensile properties

      SCRIPTA MATERIALIA


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 28/02/20 alle ore 20:40:53