Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'LOW-CARBON STEELS' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 56 riferimenti
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Huang, C; Hawbolt, EB; Chen, X; Meadowcroft, TR; Matlock, DK
      Flow stress modeling and warm rolling simulation behavior of two Ti-Nb interstitial-free steels in the ferrite region

      ACTA MATERIALIA
    2. Diligent, S; Gautier, E; Lemoine, X; Berveiller, M
      Lattice orientation dependence of the stored energy during cold-rolling ofpolycrystalline steels

      ACTA MATERIALIA
    3. Liu, C; Zhao, ZB; Northwood, DO; Liu, YX
      A new empirical formula for the calculation of M-S temperatures in pure iron and super-low carbon alloy steels

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    4. Chiou, CS; Yang, JR; Huang, CY
      The effect of prior compressive deformation of austenite on toughness property in an ultra-low carbon bainitic steel

      MATERIALS CHEMISTRY AND PHYSICS
    5. Hanlon, DN; Todd, I; Peekstok, E; Rainforth, WM; van der Zwaag, S
      The application of laser scanning confocal microscopy to tribological research

      WEAR
    6. Shtanskii, DV
      Analysis of phase and structural transformations in ternary systems by thecomputer-thermodynamic methods: A review

      PHYSICS OF METALS AND METALLOGRAPHY
    7. Nagumo, M; Yagi, T; Saitoh, H
      Deformation-induced defects controlling fracture toughness of steel revealed by tritium desorption behaviors

      ACTA MATERIALIA
    8. Dehghani, K; Jonas, JJ
      Dynamic bake hardening of interstitial-free steels

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    9. Qiu, H; Mori, H; Enoki, M; Kishi, T
      Fracture mechanism and toughness of the welding heat-affected zone in structural steel under static and dynamic loading

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    10. Unigovsky, Y
      Regression analysis of the mechanical properties - Composition dependencies for cast low- and medium-carbon steels

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    11. Ohtani, T; Ogi, H; Minami, Y; Hirao, M
      Ultrasonic attenuation monitoring of fatigue damage in low carbon steels with electromagnetic acoustic resonance (EMAR)

      JOURNAL OF ALLOYS AND COMPOUNDS
    12. Mendoza, R; Alanis, M; Huante, J; Gonzalez-Rivera, G; Juarez-Islas, JA
      Evaluation of the mechanical properties and corrosion behaviour of ultra-clean steels

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    13. Carabajar, S; Merlin, J; Massardier, V; Chabanet, S
      Precipitation evolution during the annealing of an interstitial-free steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    14. Saint-Raymond, H; Huin, D; Stouvenot, F
      Mechanisms and modeling of liquid steel decarburization below 10 ppm carbon

      MATERIALS TRANSACTIONS JIM
    15. Park, YB; Kestens, L; Jonas, JJ
      Effect of internal stresses in cold rolled IF steel on the orientations ofrecrystallized grains

      ISIJ INTERNATIONAL
    16. Yada, H; Li, CM; Yamagata, H
      Dynamic gamma ->alpha transformation during hot deformation in iron-nickel-carbon alloys

      ISIJ INTERNATIONAL
    17. Banerjee, MK; Ghosh, D; Datta, S
      Effect of composition and thermomechanical processing on the ageing characteristic of copper-bearing HSLA steel

      SCANDINAVIAN JOURNAL OF METALLURGY
    18. Garcia-Redondo, MD; Castano-Marin, ML; Gomez-Briceno, D
      Behavior of low alloy steel SA-508 and carbon steel A-410b in operation and shutdown conditions in primary loop of pressurized water reactor (PWR)

      REVISTA DE METALURGIA
    19. Hutchinson, B
      Deformation microstructures and textures in steels

      PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
    20. Kozeschnik, E; Pletenev, V; Zolotorevsky, N; Buchmayr, B
      Aluminum nitride precipitation and texture development in batch-annealed bake-hardening steel

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    21. Sarwar, M; Priestner, R
      Hardenability of austenite in a dual-phase steel

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    22. Nagumo, M; Takai, K; Okuda, N
      Nature of hydrogen trapping sites in steels induced by plastic deformation

      JOURNAL OF ALLOYS AND COMPOUNDS
    23. Mintz, B
      The influence of composition on the hot ductility of steels and to the problem of transverse cracking

      ISIJ INTERNATIONAL
    24. Lagneborg, R; Siwecki, T; Zajac, S; Hutchinson, B
      The role of vanadium in microalloyed steels

      SCANDINAVIAN JOURNAL OF METALLURGY
    25. Van Cauter, A; Horzenberger, F; De Cooman, BC
      Relation between formability and precipitates in Ti-IF enamelling steels

      STEEL RESEARCH
    26. Shtansky, DV; Nakai, K; Ohmori, Y
      Formation of austenite and dissolution of carbides in Fe 8.2Cr-C alloys

      ZEITSCHRIFT FUR METALLKUNDE
    27. Geyer, J; Flock, J; Broekaert, JAC
      Characterization of precipitates in Ti-stabilized steels with low-energy electron-induced X-ray spectrometry and scanning electron microscopy

      MIKROCHIMICA ACTA
    28. Yoshida, H; Katsumoto, H; Nagumo, M
      Fracture toughness improvement mechanism of calcium treated steel

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    29. PERELOMA EV; HODGSON PD
      THE EFFECT OF TRANSFORMATION PATH ON THE FINAL MICROSTRUCTURE OF HIGH-SILICON AND LOW-SILICON 0.1 WT.PERCENT C-STEELS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    30. TAGASHIRA K; TAKAZAWA K
      THE FORMATION AND DECOMPOSITION OF CU-C PAIRS IN QUENCH-AGED FE-C-CU ALLOYS

      ISIJ international
    31. YOSHIDA H; NAGUMO M
      FEM ANALYSIS OF DUCTILE CRACK-GROWTH IN FRACTURE TRANSITION REGION FOR STEELS WITH DIFFERENT VOID NUCLEATION FREQUENCY

      ISIJ international
    32. DEBOER B; WIETING J
      FORMATION OF A NEAR (001)[110]-RECRYSTALLIZATION TEXTURE IN ELECTRICAL STEELS

      Scripta materialia
    33. RAUF LA; BOYD JD
      MICROSTRUCTURAL EVOLUTION DURING THERMOMECHANICAL PROCESSING OF A TI-NB INTERSTITIAL-FREE STEEL JUST BELOW THE AR-3 TEMPERATURE

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    34. KESTENS L; JONAS JJ
      MODELING TEXTURE CHANGE DURING THE STATIC RECRYSTALLIZATION OF A COLD-ROLLED AND ANNEALED ULTRA-LOW CARBON-STEEL PREVIOUSLY WARM ROLLED IN THE FERRITE REGION

      ISIJ international
    35. PARK YB; LEE DN; GOTTSTEIN G
      EVOLUTION OF RECRYSTALLIZATION TEXTURES FROM COLD-ROLLING TEXTURES ININTERSTITIAL-FREE STEEL

      Materials science and technology
    36. ISHIGURO Y; MURAYAMA T; CHINO A; SATO K; SHIMA Y; KIDO A; MORITA M
      A PRECISE QUANTITATIVE-ANALYSIS OF PRECIP ITATES IN TI-BEARING INTERSTITIAL-FREE STEEL

      Tetsu to hagane
    37. KESTENS L; JONAS JJ; VANHOUTTE P; AERNOUDT E
      ORIENTATION SELECTIVE RECRYSTALLIZATION OF NONORIENTED ELECTRICAL STEELS

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    38. MUKUNTHAN K; HAWBOLT EB
      MODELING RECOVERY AND RECRYSTALLIZATION KINETICS IN COLD-ROLLED TI-NBSTABILIZED INTERSTITIAL-FREE STEEL

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    39. GROSSHEIM H; SCHOTTEN K; BLECK W
      PHYSICAL SIMULATION OF HOT-ROLLING IN THE FERRITE RANGE OF STEELS

      Journal of materials processing technology
    40. RUSZ S; LAPKOWSKI W; SINCZAK J; BORUTA J
      NEW ASPECTS OF THE PLASTOMETRIC TESTS FOR MIDDLE AND HIGH-CARBON STEELS IN THE SUPERPLASTIC CONDITIONS

      Journal of materials processing technology
    41. GUILLET A; ESSADIQI E; LESPERANCE G; HAMEL FG
      MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF STRIP CAST 1008-STEEL AFTER SIMULATED COILING, COLD-ROLLING AND BATCH ANNEALING

      ISIJ international
    42. MAJTA J; LENARD JG; PIETRZYK M
      MODELING THE EVOLUTION OF THE MICROSTRUCTURE OF A NB STEEL

      ISIJ international
    43. YANG XH; VANDERSCHUEREN D; DILEWIJNS J; STANDAERT C; HOUBAERT Y
      SOLUBILITY PRODUCTS OF TITANIUM SULFIDE AND CARBOSULFIDE IN ULTRA-LOWCARBON-STEELS

      ISIJ international
    44. DEPAEPE A; ELOOT K; DILEWIJNS J; STANDAERT C
      EFFECT OF HOT-ROLLING PARAMETERS ON THE MAGNETIC-PROPERTIES OF A LOW-SILICON ULTRA-LOW-CARBON STEEL

      Journal of magnetism and magnetic materials
    45. SU X; CLAYTON P
      SURFACE-INITIATED ROLLING-CONTACT FATIGUE OF PEARLITIC AND LOW-CARBONBAINITIC STEELS

      Wear
    46. OLLILAINEN V
      ASSESSMENT OF THE COLD FORMABILITY OF FERRITIC STEELS USING PARAMETERS DETERMINED IN UNIAXIAL TENSILE TESTING

      Journal of materials engineering and performance
    47. PELLETIER JM; OUCHERIF F; SALLAMAND P; VANNES AB
      HADFIELD STEEL COATINGS ON LOW-CARBON STEEL BY LASER CLADDING

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    48. KRAUSS G; THOMPSON SW
      FERRITIC MICROSTRUCTURES IN CONTINUOUSLY COOLED LOW-CARBON AND ULTRALOW-CARBON STEELS

      ISIJ international
    49. YAMADA K; NIIKURA M
      PRECIPITATION BEHAVIOR OF TITANIUM CARBO- SULFIDE IN EXTRA-LOW-CARBONTITANIUM-ADDED STEELS

      Tetsu to hagane
    50. WILSON EA
      THE GAMMA-ALPHA-TRANSFORMATION IN LOW-CARBON IRONS

      ISIJ international
    51. ZAHUMENSKY P; JANOVEC J; BLACH J
      SOME ASPECTS OF TEMPERED MARTENSITE EMBRITTLEMENT IN 3CR-MO-V STEEL

      ISIJ international
    52. PATSIOGIANNIS F; PAL UB; BOGAN RS
      LABORATORY-SCALE REFINING STUDIES ON LOW-CARBON ALUMINUM KILLED STEELS USING SYNTHETIC FLUXES

      ISIJ international
    53. RAY RK; JONAS JJ; BUTRONGUILLEN MP; SAVOIE J
      TRANSFORMATION TEXTURES IN STEELS

      ISIJ international
    54. MAEHARA Y; KAMEI K
      NITROGENATION AND HOT EMBRITTLEMENT IN TI-ADDED ULTRA-LOW CARBON-STEELS

      ISIJ international
    55. SUBRAMANIAN S; PRIKRYL M; GAULIN BD; CLIFFORD DD; BENINCASA S; OREILLY I
      EFFECT OF PRECIPITATE SIZE AND DISPERSION ON LANKFORD VALUES OF TITANIUM STABILIZED INTERSTITIAL-FREE STEELS

      ISIJ international
    56. RICHTER J; GUTH A; KOTHE A; BACKMANN G
      INFLUENCE OF MN AND SI CONTENTS ON STRUCTURE AND MECHANICAL-PROPERTIES OF FERRITIC-PEARLITIC HSLA STEELS

      Steel research


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 29/10/20 alle ore 13:14:05