Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'FINITE' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 23697 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Mines, RAW; Alias, A
      Numerical simulation of the progressive collapse of polymer composite sandwich beams under static loading

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    2. Barton, EN; Ogin, SL; Thorne, AM; Reed, GT
      Optimisation of the coating of a fibre optical sensor embedded in a cross-ply GFRP laminate

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    3. Winterhof, A
      Polynomial interpolation of the discrete logarithm

      DESIGNS CODES AND CRYPTOGRAPHY
    4. Borovykh, N; Drissi, D; Spijker, MN
      A bound on powers of linear operators, with relevance to numerical stability

      APPLIED MATHEMATICS LETTERS
    5. Lee, BS; Lee, GM; Lee, SJ
      Variational-type inequalities for (eta,theta,delta)-pseudomonotone-type set-valued mappings in nonreflexive Banach spaces

      APPLIED MATHEMATICS LETTERS
    6. VOSTEEN H-D; CLAUSER C; LAMMERER B
      The thermal regime of the eastern Alps: results from inverse analyses along the TRANSALP traverse

      Memorie di scienze geologiche
    7. VOSTEEN H-D; CLAUSER C; LAMMERER B
      The thermal regime of the eastern Alps: results from inverse analyses along the TRANSALP traverse

      Memorie di scienze geologiche
    8. Bose, I; Pal, R
      Average waiting time of customers in a priority M/D/k queue with finite buffers

      COMPUTERS & OPERATIONS RESEARCH
    9. Yoo, C
      Finite-element analysis of tunnel face reinforced by longitudinal pipes

      COMPUTERS AND GEOTECHNICS
    10. Perianez, R; Elliott, AJ
      A particle-tracking method for simulating the dispersion of non-conservative radionuclides in coastal waters

      JOURNAL OF ENVIRONMENTAL RADIOACTIVITY
    11. Bax, E; Franklin, J
      A permanent algorithm with exp[Omega(n(1/3)/2 ln n)] expected speedup for 0-1 matrices

      ALGORITHMICA
    12. Song, EY
      Taxation, human capital and growth

      JOURNAL OF ECONOMIC DYNAMICS & CONTROL
    13. Wolf, JP; Song, CM
      Some cornerstones of dynamic soil-structure interaction

      ENGINEERING STRUCTURES
    14. Liew, KM; Kitipornchai, S; Ng, TY; Zou, GP
      Multi-dimensional superelastic behavior of shape memory alloys via nonlinear finite element method

      ENGINEERING STRUCTURES
    15. Hong, K; Yang, JG; Lee, SK
      Moment-rotation behavior of double angle connections subjected to shear load

      ENGINEERING STRUCTURES
    16. Kone, O
      Conformance testing to real-time communications systems

      COMPUTER COMMUNICATIONS
    17. Mefire, SM
      Mixed finite element and boundary element approximation in 3D magnetostatics for computation of the magnetic induction

      APPLIED MATHEMATICS AND COMPUTATION
    18. Tabata, M; Eshima, N; Takagi, I
      An infinite continuous model which derives from a finite discrete model describing the time evolution of the density of firms

      APPLIED MATHEMATICS AND COMPUTATION
    19. Zhang, TY; Zhao, MH; Tong, P
      Fracture of piezoelectric ceramics

      ADVANCES IN APPLIED MECHANICS, VOL 38
    20. Cortes, J
      On the construction of upwind schemes for non-equilibrium transient two-phase flows

      COMPUTERS & FLUIDS
    21. Shu, C; Wee, KHA
      Numerical simulation of natural convection in a square cavity by SIMPLE-generalized differential quadrature method

      COMPUTERS & FLUIDS
    22. Boyer, F
      A theoretical and numerical model for the study of incompressible mixture flows

      COMPUTERS & FLUIDS
    23. Sweeney, J; Caton-Rose, P; Coates, PD
      The modelling of large deformations of pre-oriented polyethylene

      POLYMER
    24. Coorevits, P; Hild, P; Lhalouani, K; Sassi, T
      Mixed finite element methods for unilateral problems: Convergence analysisand numerical studies

      MATHEMATICS OF COMPUTATION
    25. E, WN; Liu, JG
      Projection method III: Spatial discretization on the staggered grid

      MATHEMATICS OF COMPUTATION
    26. Bramble, JH; Pasciak, JE; Steinbach, O
      On the stability of the L-2 projection in H-1(Omega)

      MATHEMATICS OF COMPUTATION
    27. Carstensen, C
      Merging the Bramble-Pasciak-Steinbach and the Crouzeix-Thomee criterion for H-1-stability of the L-2-projection onto finite element spaces

      MATHEMATICS OF COMPUTATION
    28. Razzaghi, M; Oppenheimer, S; Ahmad, F
      Tau method approximation for radiative transfer problems in a slab medium

      JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER
    29. Almeida, J; Escada, A
      On the equation V * G = EV

      JOURNAL OF PURE AND APPLIED ALGEBRA
    30. Nuno, N; Amabili, M; Groppetti, R; Rossi, A
      Static coefficient of friction between Ti-6Al-4V and PMMA for cemented hipand knee implants

      JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    31. Li, XF; Fan, TY
      Transient analysis of a piezoelectric strip with a permeable crack under anti-plane impact loads

      INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
    32. Kobayashi, N; Tsuchiya, T; Kikuno, T
      A new method for constructing pair-wise covering designs for software testing

      INFORMATION PROCESSING LETTERS
    33. Cirak, F; Scott, MJ; Antonsson, EK; Ortiz, M; Schroder, P
      Integrated modeling, finite-element analysis, and engineering design for thin-shell structures using subdivision

      COMPUTER-AIDED DESIGN
    34. Wood, JA
      The structure of linear codes of constant weight

      TRANSACTIONS OF THE AMERICAN MATHEMATICAL SOCIETY
    35. Edwards, ME; Wang, SSS; Good, TA
      Role of viscoelastic properties of differentiated SH-SY5Y human neuroblastoma cells in cyclic shear stress injury

      BIOTECHNOLOGY PROGRESS
    36. Gao, X; Dodds, RH; Tregoning, RL; Joyce, JA
      Weibull stress model for cleavage fracture under high-rate loading

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    37. Carpinteri, A; Ciola, F; Pugno, N; Ferrara, G; Gobbi, ME
      Size-scale and slenderness influence on the compressive strain-softening behaviour of concrete

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    38. Fermer, M; Svensson, H
      Industrial experiences of FE-based fatigue life predictions of welded automotive structures

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    39. Amstutz, H; Storzel, K; Seeger, T
      Fatigue crack growth of a welded tube-flange connection under bending and torsional loading

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    40. Doquet, V; Frelat, J
      Branch crack development from the flank of a fatigue crack propagating in mode II

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    41. Bouyne, E; Joly, P; Houssin, B; Wiesner, CS; Pineau, A
      Mechanical and microstructural investigations into the crack arrest behaviour of a modern 2 1/4 Cr-1Mo pressure vessel steel

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    42. Pitoiset, X; Rychlik, I; Preumont, A
      Spectral methods to estimate local multiaxial fatigue failure for structures undergoing random vibrations

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    43. Jiang, Y; Xu, B
      Deformation analysis of notched components and assessment of approximate methods

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    44. Tsamasphyros, GJ; Kanderakis, GN; Karalekas, D; Rapti, D; Gdoutos, EE; Zacharopoulos, D; Marioli-Riga, ZP
      Study of composite patch repair by analytical and numerical methods

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    45. Gdoutos, EE; Papakaliatakis, G
      Study of crack growth in solid propellants

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    46. Tserpes, KI; Papanikos, P; Kermanidis, T
      A three-dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    47. Guagliano, M; Vergani, L
      Mode I stress intensity factors for curved cracks in gears by a weight functions method

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    48. Andrews, RM; Garwood, SJ
      An analysis of fracture under biaxial loading using the non-singular T-stress

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    49. Skallerud, B; Zhang, ZL
      On numerical analysis of damage evolution in cyclic elastic-plastic crack growth problems

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    50. Hirayama, K; Hayashi, Y
      Finite element analysis for complex permittivity measurement of a dielectric plate and its application to inverse problem

      ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS
    51. Isobe, A; Hikita, M; Asai, K; Sumioka, A
      Investigation of new-mode-type SAWs by procedures combined with finite-element and analytical method, and their applications for devices used in mobile communications

      ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS
    52. Nonaka, J; Nitta, S; Mutoh, A
      The influence of a plate-type heat sink on the interference between adjacent printed circuit boards: The case of capacitive coupling

      ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS
    53. Kusudo, T; Oka, I; Fujiwara, C
      A selective repeat request with continuous multiple transmissions for a message

      ELECTRONICS AND COMMUNICATIONS IN JAPAN PART I-COMMUNICATIONS
    54. Folch, A; Codina, R; Marti, J
      Numerical modeling of magma withdrawal during explosive caldera-forming eruptions

      JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
    55. Wang, BJ; Bogucki, DJ; Redekopp, LG
      Internal solitary waves in a structured thermocline with implications for resuspension and the formation of thin particle-laden layers

      JOURNAL OF GEOPHYSICAL RESEARCH-OCEANS
    56. Feng, PE; Qian, ZY; Pan, SX; Wu, JW; Qiu, QY
      AGENT based structural static and dynamic collaborative optimization

      SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES
    57. Cheng, M; Zhou, E
      Analysis and control of novel split-winding doubly salient permanent magnet motor for adjustable speed drive

      SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES
    58. Li, ZX; Jin, YQ
      Numerical simulation of bistatic scattering from fractal rough surface in the finite element method

      SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES
    59. Mai, TH; Zebiri, R; de Lorenzo, T
      Transient mixed convection of laminar boundary layer past a vertical plate

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    60. Crepin, D; Pyrz, M; De Saxce, G
      Mixed finite 3D elements adapted for estimation of stress concentration inassembling of composites

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    61. Nayagum, D; Schafer, G; Mose, R
      A mired hybrid finite element approximation of a nonlinear diffusion equation modelling two-phase flow in porous media

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    62. Sanchez-Hubert, J; Sanchez-Palencia, E
      Anisotropic finite element estimates and local locking for shells: parabolic case

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    63. Tamagnini, C; Chambon, R; Caillerie, D
      A second gradient elastoplastic cohesive-frictional model for geomaterials

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    64. Francescato, P; Pastor, J; Thai, TH
      Yield strength of porous materials

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    65. Karamian-Surville, P
      Numerical experiments on propagation of singularities across an edge in thin parabolic shells

      COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE B-MECANIQUE
    66. Li, Q; Steven, GP; Xie, YM
      A simple checkerboard suppression algorithm for evolutionary structural optimization

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    67. Marklund, PO; Nilsson, L
      Optimization of a car body component subjected to side impact

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    68. Hansen, JS; Liu, ZS; Olhoff, N
      Shape sensitivity analysis using a fixed basis function finite element approach

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    69. Kim, NH; Park, YH; Choi, KK
      Optimization of a hyper-elastic structure with multibody contact using continuum-based shape design sensitivity analysis

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    70. Rozvany, GIN
      Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    71. Peulon, S; Guillou, V; L'Her, M
      Liquid vertical bar liquid microinterface. Localization of the phase boundary by voltammetry and chronoamperometry; influence of the microchannel dimensions on diffusion

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    72. Britz, D; Strutwolf, J; Thogersen, L
      Investigation of some starting protocols for BDF (FIRM) in electrochemicaldigital simulation

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    73. Galceran, J; Taylor, SL; Bartlett, PN
      Modelling the steady-state current at the inlaid disc microelectrode for homogeneous mediated enzyme catalysed reactions

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    74. Hjelm, AK; Lindbergh, G; Lundqvist, A
      Investigation of LiMn2O4 cathodes for use in rechargeable lithium batteries by linear sweep voltammetry Part I. Theoretical study

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    75. Dan, C; Van den Bossche, B; Bortels, L; Nelissen, G; Deconinck, J
      Numerical simulation of transient current responses in diluted electrochemical ionic systems

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    76. Ohwaki, T; Yamashita, K
      A DFT study of electric field effects on proton transfer reactions at H+(H2O)(2)/Pt(111) and Ag(111)

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    77. Bieniasz, LK; Britz, D
      Chronopotentiometry at a microband electrode: simulation study using a Rosenbrock time integration scheme for differential-algebraic equations and a direct sparse solver

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    78. Lee, HJ; Beriet, C; Ferrigno, R; Girault, HH
      Cyclic voltammetry at a regular microdisc electrode array

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    79. Liu, HH; Hill, HAO; Chapman, SK
      Electrochemistry of the flavodehydrogenase domain of flavocytochrome b(2) engineered for L-mandelate dehydrogenase activity

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    80. Svir, IB; Oleinick, AI
      The electrogenerated chemiluminescence kinetics at a microdisc electrode

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    81. Ferrigno, R; Girault, HH
      Hydrodynamic approach to ion transfer reactions across an ITIES

      JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    82. Oliver, RE; Jones, AF; Rowland, M
      A whole-body physiologically based pharmacokinetic model incorporating dispersion concepts: Short and long time characteristics

      JOURNAL OF PHARMACOKINETICS AND PHARMACODYNAMICS
    83. Mezani, S; Ibtiouen, R; Kechroud, R; Touhami, O; Laporte, B
      Finite element thermal modeling of an induction motor

      ELECTRIC POWER COMPONENTS AND SYSTEMS
    84. Hur, J; Toliyat, HA; Hong, JP
      Dynamic analysis of linear induction motors using 3-D equivalent magnetic circuit network (EMCN) method

      ELECTRIC POWER COMPONENTS AND SYSTEMS
    85. Oztura, H; Akpinar, E
      Modeling and analysis of a two-phase permanent magnet brushless motor

      ELECTRIC POWER COMPONENTS AND SYSTEMS
    86. Zaim, ME
      Design and performance of the solid rotor reluctance machines

      ELECTRIC POWER COMPONENTS AND SYSTEMS
    87. Chowdhury, SK; Chowdhury, SP; Pal, SK; Chowdhury, S
      An interactive software package to predict the performance of a single-phase induction motor

      ELECTRIC POWER COMPONENTS AND SYSTEMS
    88. Bank, RE; Jimack, PK
      A new parallel domain decomposition method for the adaptive finite elementsolution of elliptic partial differential equations

      CONCURRENCY AND COMPUTATION-PRACTICE & EXPERIENCE
    89. Arena, D; Ludovico, M; Manara, G; Monorchio, A
      Analysis of waveguide discontinuities using edge elements in a hybrid modematching/finite elements approach

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    90. Mao, SG; Chen, MY
      A novel periodic electromagnetic bandgap structure for finite-width conductor-backed coplanar waveguides

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    91. Jiao, D; Jin, JM
      Time-domain finite-element modeling of dispersive media

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    92. Guo, WH; Li, WJ; Huang, YZ
      Computation of resonant frequencies and quality factors of cavities by FDTD technique and Pade approximation

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    93. Lin, CT; Liao, CL; Chen, CH
      Finite-ground coplanar-waveguide branch-line couplers

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    94. Georgakopoulos, SV; Renaut, RA; Balanis, CA; Birtcher, CR
      A hybrid fourth-order FDTD utilizing a second-order FDTD subgrid

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    95. Zhu, Y; Cangellaris, AC
      Robust multigrid preconditioner for fast finite element modeling of microwave devices

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    96. Yioultsis, TV; Tsiboukis, TD
      Convergence-optimized, higher order vector finite elements for microwave simulations

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    97. Kulas, L; Mrozowski, M
      Reduced-order models in FDTD

      IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
    98. Jin, XZ; Li, G; Aluru, NR
      On the equivalence between least-squares and kernel approximations in meshless methods

      CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
    99. Chen, WH; Guo, XM
      Element free Galerkin method for three-dimensional structural analysis

      CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES
    100. Nesnas, K; Abdul-Latif, A
      Lateral plastic collapse of cylinders: Experiments and modeling

      CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 28/05/20 alle ore 10:46:01