Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'EMBRITTLEMENT' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 1121 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Radhakrishna, A; Baligidad, RG; Sarma, DS
      Effect of carbon on structure and properties of FeAl based intermetallic alloy

      SCRIPTA MATERIALIA
    2. Morasch, KR; Bahr, DF
      The effects of hydrogen on deformation and cross slip in a BCC titanium alloy

      SCRIPTA MATERIALIA
    3. Nagao, A; Kuramoto, S; Ichitani, K; Kanno, M
      Visualization of hydrogen transport in high strength steels affected by stress fields and hydrogen trapping

      SCRIPTA MATERIALIA
    4. Yamasaki, T
      High-strength nanocrystalline Ni-W alloys produced by electrodeposition and their embrittlement behaviors during grain growth

      SCRIPTA MATERIALIA
    5. Nagumo, M; Uyama, H; Yoshizawa, M
      Accelerated failure in high strength steel by alternating hydrogen-charging potential

      SCRIPTA MATERIALIA
    6. Sen, M; Balasubramaniam, R
      Hydrogen trapping at carbide-matrix interfaces in Fe3Al-C intermetallics

      SCRIPTA MATERIALIA
    7. Banerjee, K; Chatterjee, UK
      Hydrogen permeation and hydrogen content under cathodic charging in HSLA 80 and HSLA 100 steels

      SCRIPTA MATERIALIA
    8. Cheng, XY; Wan, XJ
      The influence of atomic ordering on the hydrogen embrittlement of (Co,Fe)(3)V polycrystal

      SCRIPTA MATERIALIA
    9. Shivanyuk, VN; Shanina, BD; Tarasenko, AV; Gavriljuk, VG; Foct, J
      Effect of hydrogen on atomic bonds in austenitic stainless steel

      SCRIPTA MATERIALIA
    10. Cui, CY; Guo, JT; Qi, YH; Ye, HQ
      High temperature embrittlement of NiAl alloy induced by hot isostatic pressing (HIPing) and aging

      SCRIPTA MATERIALIA
    11. Prakash, U; Sauthoff, G
      Machinable iron aluminides containing carbon

      SCRIPTA MATERIALIA
    12. Chatain, D; Rabkin, E; Derenne, J; Bernardini, J
      Role of the solid/liquid interface faceting in rapid penetration of a liquid phase along grain boundaries

      ACTA MATERIALIA
    13. Yang, R; Zhao, DL; Wang, YM; Wang, SQ; Ye, HQ; Wang, CY
      Effects of Cr, Nn on the cohesion of the gamma-iron grain boundary

      ACTA MATERIALIA
    14. Teter, DF; Robertson, IM; Birnbaum, HK
      The effects of hydrogen on the deformation and fracture of beta-titanium

      ACTA MATERIALIA
    15. Horikawa, K; Kuramoto, S; Kanno, M
      Intergranular fracture caused by trace impurities in an Al-5.5 mol% Mg alloy

      ACTA MATERIALIA
    16. M'Cirdi, L; Lebrun, JL; Inal, K; Barbier, G
      Experimental approach of a crystallographic cleavage criterion in a cast aged duplex stainless steel

      ACTA MATERIALIA
    17. Pfaendtner, JA; McMahon, CJ
      Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures - An example of dynamic embrittlement

      ACTA MATERIALIA
    18. Miura, H; Kotani, K; Sakai, T
      Temperature dependency of cyclic deformation behavior of Cu-SiO2 single crystal

      ACTA MATERIALIA
    19. Lynch, SP; Muddle, BC; Pasang, T
      Ductile-to-brittle fracture transitions in 8090 Al-Li alloys

      ACTA MATERIALIA
    20. Chowdhury, SG; Kumar, P; Das, SK; Bhattacharya, DK; Parida, N
      Failure analysis of high temperature studs

      ENGINEERING FAILURE ANALYSIS
    21. Reddy, KG; Jha, AK; Diwakar, V
      Failure of cadmium plated maraging steel tension bolt

      ENGINEERING FAILURE ANALYSIS
    22. Lancha, AM; Serrano, M; Lapena, J; Gomez-Briceno, D
      Failure analysis of a river water circulating pump shaft from a NPP

      ENGINEERING FAILURE ANALYSIS
    23. Carter, TJ; Cornish, LA
      Hydrogen in metals

      ENGINEERING FAILURE ANALYSIS
    24. Suh, D; Dauskardt, RH
      Effects of pre-charged hydrogen on the mechanical and thermal behavior of Zr-Ti-Ni-Cu-Be bulk metallic glass alloys

      MATERIALS TRANSACTIONS
    25. Kaneno, Y; Wada, M; Inoue, H; Takasugi, T
      Effects of grain size and temperature on environmental embrittlement of Ni-3(Si, Ti) alloy

      MATERIALS TRANSACTIONS
    26. Kuramoto, S; Okahana, J; Kanno, M
      Hydrogen assisted intergranular crack propagation during environmental embrittlement in an Al-Zn-Mg-Cu alloy

      MATERIALS TRANSACTIONS
    27. Gamsjager, E; Chimani, CM; Fischer, FD; Svoboda, J
      Diffusional phase transformations in steel - theory and application to continuous casting

      JOURNAL DE PHYSIQUE IV
    28. Tonneau, A; Henaff, G
      Tensile and fatigue properties as influenced by environment of a FeAl alloy prepared by mechanical alloying

      JOURNAL DE PHYSIQUE IV
    29. Taillard, R; Hennion, A; Massoud, JP; Van Duysen, JC; Foct, J
      Thermal aging and irradiation effects in melted zones of VVER reactor vessels

      JOURNAL DE PHYSIQUE IV
    30. Tonneau, A; Gerland, M; Henaff, G
      Environment-sensitive fracture of iron aluminides during cyclic crack growth

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    31. Lee, KB; Yang, HR; Kwon, H
      Effects of alloying additions and austenitizing treatments on secondary hardening and fracture behavior for martensitic steels containing both Mo andW

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    32. Lee, KB; Yang, HR; Kwon, H
      Secondary hardening and impact fracture behavior in isothermally aged Mo, W, and Mo-W steels

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    33. Krauss, G
      Deformation and fracture in martensitic carbon steels tempered at low temperatures

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    34. Henaff, G; Tonneau, A
      Environment-sensitive fracture of iron aluminides under monotonic tensile loading

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    35. Xiao, L; Umakoshi, Y; Sun, J
      Cyclic deformation behavior and microstructures of hydrided ZIRCALOY-4 under biaxial loading

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    36. Krauss, G
      Deformation and fracture in martensitic carbon steels tempered at low temperatures

      METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
    37. Abd-Allah, NM; El-Fadaly, MS; Megahed, MM; Eleiche, AM
      Fracture toughness properties of high-strength martensitic steel within a wide hardness range

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    38. Tsay, LW; Chen, WY; Shiue, RK; Shiue, RH
      Stress corrosion cracking of A588 steel weldments in flue gas related environments

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    39. Leyens, C
      Oxidation of orthorhombic titanium aluminide Tl-22AL-25NB in air between 650 and 1000 degrees C

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    40. Kroupa, A; Havrankova, J; Coufalova, M; Svoboda, M; Vrest'al, J
      Phase diagram in the iron-rich corner of the Fe-Cr-Mo-V-C system below 1000 K

      JOURNAL OF PHASE EQUILIBRIA
    41. Fabritsiev, SA; Pokrovsky, AS; Edwards, DJ; Zinkle, SJ; Rowcliffe, AF; Solomon, R
      The effect of copper-steel joining technology on the radiation resistance of copper alloys

      PLASMA DEVICES AND OPERATIONS
    42. Murty, KL; Seok, CC
      Fracture in ferritic reactor steel - Dynamic strain aging and cyclic loading

      JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    43. Sozanska, M; Sojka, J; Betakova, P; Dagbert, C; Hyspecka, L; Galland, J; Tvrdy, M
      Examination of hydrogen interaction in carbon steel by means of quantitative microstructural and fracture descriptions

      MATERIALS CHARACTERIZATION
    44. Cheng, XY; Wan, XJ; Wu, QY; Sun, XK
      Diffusion of hydrogen along the grain boundaries in Ni3Al alloys

      JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    45. Wan, XJ; Chen, YX; Cheng, XY
      Environmental embrittlement of intermetallics

      PROGRESS IN NATURAL SCIENCE
    46. Sofronis, P; Liang, Y; Aravas, N
      Hydrogen induced shear localization of the plastic flow in metals and alloys

      EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
    47. Miller, MK; Russell, KF; Kocik, J; Keilova, E
      Atom probe tomography of 15Kh2MFA Cr-Mo-V steel surveillance specimens

      MICRON
    48. Roy, AK; Spragge, MK; Fleming, DL; Lum, BY
      Cracking of titanium alloys under cathodic applied potential

      MICRON
    49. Varin, RA; Song, YK
      Effects of environment on fracture toughness of binary and ternary nickel silicide-based intermetallics

      INTERMETALLICS
    50. Wu, MY; Zhu, J; Wan, XJ
      The effect of B addition on charge distribution in Co3Ti

      INTERMETALLICS
    51. Cermak, J; Rothova, V
      Surface barrier for hydrogen permeability in Ni3Al - influence of Cr, Fe and Zr

      INTERMETALLICS
    52. Chao, J; Morris, DG; Munoz-Morris, MA; Gonzalez-Carrasco, JL
      The influence of some microstructural and test parameters on the tensile behaviour and the ductility of a mechanically-alloyed Fe-40Al alloy

      INTERMETALLICS
    53. Huang, YD; Yang, WY; Chen, GL; Sun, ZQ
      On the effect of the B2 thermomechanical treatment in improving the room temperature ductility of Fe3Al-based alloys

      INTERMETALLICS
    54. Wang, JL; Chung, YW
      Effects of boron on water dissociation and surface diffusivity of hydrogenon Ni-3(Al,Ti)(110) single crystal surfaces

      INTERMETALLICS
    55. Jiang, CB; Li, H; Tan, J; Wu, SD; Rong, LJ; Patu, S
      A dramatic decrease of the dislocation velocity in Ni3Al single crystals under the influence of hydrogen

      INTERMETALLICS
    56. Huang, YD; Yang, WY; Sun, ZQ
      Effect of the alloying element chromium on the room temperature ductility of Fe3Al intermetallics

      INTERMETALLICS
    57. Wright, JL; Zhu, JH; Horton, JA; Heatherly, L
      Effect of boron doping on the mechanical properties of ordered Ni-Mo alloys

      INTERMETALLICS
    58. Wu, D; Baker, I
      The effect of environment and strain rate on the room temperature tensile properties of FeAl single crystals

      INTERMETALLICS
    59. Dowson, P; Stinner, CP
      The relationship of stress and temperature on high-temperature corrosion fracture mechanism of waspaloy in various catalyst environments

      MATERIALS AT HIGH TEMPERATURES
    60. Yang, R; Wang, YM; Ye, HQ; Wang, CY
      First-principles study of the segregation effects on the cohesion of FCC grain boundary

      JOURNAL OF PHYSICS-CONDENSED MATTER
    61. Lu, GH; Suzuki, A; Ito, A; Kohyama, M; Yamamoto, R
      Ab initio pseudopotential studies on an Al Sigma=9 grain boundary: effectsof Na and Ca impurities

      PHILOSOPHICAL MAGAZINE LETTERS
    62. Shang, JX; Wang, CY; Zhao, DL
      First-principles investigation of the effect of alloying elements Ti, V ongrain boundary cohesion of FCCFe

      COMPUTATIONAL MATERIALS SCIENCE
    63. Fen, YQ; Wang, CY
      Electronic effects of nitrogen and phosphorus on iron grain boundary cohesion

      COMPUTATIONAL MATERIALS SCIENCE
    64. Nowosielski, R
      Ductility minimum temperature in selected mono-phase, binary brasses

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    65. Zielinski, A
      Hydrogen-assisted degradation of some non-ferrous metals and alloys

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    66. Chang, TL; Tsay, LW; Chen, C
      Influence of gaseous hydrogen on the notched tensile strength of D6ac steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    67. Sarioglu, F
      The effect of tempering on susceptibility to stress corrosion cracking of AISI 4140 steel in 33% sodium hydroxide at 80 degrees C

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    68. Tian, H; Liaw, PK; Wang, H; Fielden, D; Strizak, JP; Mansur, LK; DiStefano, JR
      Influence of mercury environment on the fatigue behavior of spallation neutron source (SNS) target container materials

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    69. Tsay, LW; Yang, TY; Young, MC
      Embrittlement of laser surface-annealed 17-4 PH stainless steel

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    70. Baligidad, RG; Radhakrishna, A
      Effect of hot rolling and heat treatment on structure and properties of high carbon Fe-Al alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    71. Baligidad, RG; Datta, A
      High temperature deformation behaviour of high carbon cast AIM and ESR Fe3Al alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    72. Shivanyuk, VN; Foct, J; Gavriljuk, VG
      Hydrogen-enhanced microplasticity of austenitic steels studied by means ofinternal friction

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    73. Tsay, LW; Liu, CC; Chao, YH; Shieh, YH
      Fatigue crack propagation in 2.25 Cr-1.0Mo steel weldments in air and hydrogen

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    74. Nagumo, M; Yoshida, H; Shimomura, Y; Kadokura, T
      Ductile crack growth resistance in hydrogen-charged steels

      MATERIALS TRANSACTIONS JIM
    75. Tanaka, R; Choi, PK; Koizumi, H; Hyodo, S
      Fast penetration of liquid gallium in polycrystalline aluminum films

      MATERIALS TRANSACTIONS JIM
    76. Yokoyama, K; Hamada, K; Asaoka, K
      Fracture analysis of hydrogen-charged nickel-titanium superelastic alloy

      MATERIALS TRANSACTIONS JIM
    77. Nagumo, M
      Function of hydrogen in embrittlement of high-strength steels

      ISIJ INTERNATIONAL
    78. Morris, JW; Guo, Z; Krenn, CR; Kim, YH
      The limits of strength and toughness in steel

      ISIJ INTERNATIONAL
    79. Bhadeshia, HKDH
      Design of ferritic creep-resistant steels

      ISIJ INTERNATIONAL
    80. Cui, J; Kim, IS; Kang, CY; Miyahara, K
      Creep stress effect on the precipitation behavior of Laves phase in Fe-10%Cr-6%W alloys

      ISIJ INTERNATIONAL
    81. Chang, KD; Gu, JL; Fang, HS; Yang, ZG; Bai, BZ; Zhang, WZ
      Effects of heat-treatment process of a novel bainite/martensite dual-phasehigh strength steel on its susceptibility to hydrogen embrittlement

      ISIJ INTERNATIONAL
    82. Kitano, F; Urabe, T; Fujita, T; Nakajima, K; Hosoya, Y
      New type of IF-high strength steel with superior anti-secondary work embrittlement

      ISIJ INTERNATIONAL
    83. Tohyama, N; Enoki, M; Akimune, Y; Kishi, T
      Quantitative analysis of oxidation behavior of free carbon in Si-Ti-C-O fiber-bonded ceramics

      JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
    84. Wen, M; Xu, XJ; Fukuyama, S; Yokogawa, K
      Embedded-atom-method functions for the body-centered-cubic iron and hydrogen

      JOURNAL OF MATERIALS RESEARCH
    85. Olson, GB
      Beyond discovery: Design for a new material world

      CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
    86. Lee, JH; Park, JH; Shin, DH; Lee, YH; Kim, YS
      Kinetics of Au-containing ternary intermetallic redeposition at solder/UBMinterface

      JOURNAL OF ELECTRONIC MATERIALS
    87. Biezma, MV
      The role of hydrogen in microbiologically influenced corrosion and stress corrosion cracking

      INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
    88. da Silva, MR; Tavares, SSM; Fruchart, D; Miraglia, S; Neto, JM
      The use of thermomagnetic analysis for detection quantification of 475 degrees C embrittlement of duplex stainless steels

      JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
    89. Sun, D; Han, G; Vaodee, S; Fukuyama, S; Yokogawa, K
      Tensile behaviour of type 304 austenitic stainless steels in hydrogen atmosphere at low temperatures

      MATERIALS SCIENCE AND TECHNOLOGY
    90. Maier, P; Faulkner, RG; Spellward, P; Cowan, JR
      Grain boundary segregation of phosphorus, manganese, and carbon in boiler shell weld material

      MATERIALS SCIENCE AND TECHNOLOGY
    91. McNulty, JC; He, MY; Zok, FW
      Notch sensitivity of fatigue life in a Sylramic (TM)/SiC composite at elevated temperature

      COMPOSITES SCIENCE AND TECHNOLOGY
    92. You, YY; Shiue, RK; Shiue, RH; Chen, C
      The study of carbon migration in dissimilar welding of the modified 9Cr-1Mo steel

      JOURNAL OF MATERIALS SCIENCE LETTERS
    93. Reumont, G; Vogt, JB; Iost, A; Foct, J
      The effects of an Fe-Zn intermetallic-containing coating on the stress corrosion cracking behavior of a hot-dip galvanized steel

      SURFACE & COATINGS TECHNOLOGY
    94. Luu, WC; Wu, JK
      Moisture and hydrogen-induced embrittlement of Fe3Al alloys

      MATERIALS CHEMISTRY AND PHYSICS
    95. Priyadarshi, A; Balasubramaniam, R
      On critical hydrogen concentration for hydrogen embrittlement of Fe3Al

      BULLETIN OF MATERIALS SCIENCE
    96. Juan, A; Gesari, S; Brizuela, G; Pronsato, ME
      A comparative study of the electronic structure of H pairs near a/2[1 (1)over-bar1] and a[010] dislocations in bcc Fe

      APPLIED SURFACE SCIENCE
    97. Pronsato, ME; Brizuela, G; Juan, A
      The electronic structure and location of H pairs in bcc Fe edge dislocation

      APPLIED SURFACE SCIENCE
    98. Geng, WT; Freeman, AJ; Olson, GB
      Influence of alloying additions on grain boundary cohesion of transition metals: First-principles determination and its phenomenological extension - art. no. 165415

      PHYSICAL REVIEW B
    99. Yokoyama, K; Hamada, K; Moriyama, K; Asaoka, K
      Degradation and fracture of Ni-Ti superelastic wire in an oral cavity

      BIOMATERIALS
    100. Misra, RDK
      Tutorial review - Grain boundary segregation and fracture resistance of engineering steels

      SURFACE AND INTERFACE ANALYSIS


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 10/08/20 alle ore 05:16:32