Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'DUCTILITY' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 1179 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. DEHANDSCHUTTER B; VANDYCKE S; SINTUBIN M; VANDENBERGHE N; GAVIGLIO P; SIZUN J-P; WOUTERS L
      Microfabric of fractured Boom clay at depth: a case study of brittle-ductile transitional clay behaviour

      Applied clay science
    2. Karihaloo, BL; Lange-Kornbak, D
      Optimization techniques for the design of high-performance fibre-reinforced concrete

      STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
    3. Susantha, KAS; Ge, HB; Usami, T
      A capacity prediction procedure for concrete-filled steel columns

      JOURNAL OF EARTHQUAKE ENGINEERING
    4. Paulay, T
      Some design principles relevant to torsional phenomena in ductile buildings

      JOURNAL OF EARTHQUAKE ENGINEERING
    5. Moghaddam, H; Mohammadi, RK
      Ductility reduction factor of MDOF shear-building structures

      JOURNAL OF EARTHQUAKE ENGINEERING
    6. Mylonakis, G; Reinhorn, AM
      Yielding oscillator under triangular ground acceleration pulse

      JOURNAL OF EARTHQUAKE ENGINEERING
    7. Korznikov, AV; Pakiela, Z; Kurzydlowski, KJ
      Influence of long-range ordering on mechanical properties of nanocrystalline Ni3Al

      SCRIPTA MATERIALIA
    8. Mukai, T; Yamanoi, M; Watanabe, A; Higashi, K
      Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure

      SCRIPTA MATERIALIA
    9. Maji, BC; Ray, RK
      The kinetics of recrystallisation in a warm rolled binary Fe3Al alloy

      SCRIPTA MATERIALIA
    10. Tang, F; Emura, S; Hagiwara, M
      Tensile properties of tungsten-modified orthorhombic Ti-22Al-20Nb-2W alloy

      SCRIPTA MATERIALIA
    11. Grosdidier, T; Tidu, A; Liao, HL
      Nanocrystalline Fe-40Al coating processed by thermal spraying of milled powder

      SCRIPTA MATERIALIA
    12. Cheng, XY; Wan, XJ
      The influence of atomic ordering on the hydrogen embrittlement of (Co,Fe)(3)V polycrystal

      SCRIPTA MATERIALIA
    13. Arvanitis, A; Diplas, S; Tsakiropoulos, P; Watts, JF; Whiting, MJ; Morton, SA; Matthew, JAD
      An experimental study of bonding and crystal structure modifications in MoSi2 and MoSi2+xAl (x=10 to 40 at% Al) via Auger parameter shifts and chargetransfer calculations

      ACTA MATERIALIA
    14. Alvarez, JR; Rez, P
      Calculation of electronic properties of boundaries in Ni3Al

      ACTA MATERIALIA
    15. Kim, BN; Hiraga, K; Morita, K; Sakka, Y
      Superplasticity in alumina enhanced by co-dispersion of 10% zirconia and 10% spinel particles

      ACTA MATERIALIA
    16. Liu, KW; Mucklich, F
      Thermal stability of nano-RuAl produced by mechanical alloying

      ACTA MATERIALIA
    17. Pandey, AB; Majumbar, BS; Miracle, DB
      Laminated particulate-reinforced aluminum composites with improved toughness

      ACTA MATERIALIA
    18. Kouzeli, M; Weber, L; March, SC; Mortensen, A
      Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminium

      ACTA MATERIALIA
    19. Heatherly, L; George, EP
      Grain-boundary segregation of impurities in iridium and effects on mechanical properties

      ACTA MATERIALIA
    20. Horikawa, K; Kuramoto, S; Kanno, M
      Intergranular fracture caused by trace impurities in an Al-5.5 mol% Mg alloy

      ACTA MATERIALIA
    21. Murty, BS; Ping, DH; Ohnuma, M; Hono, K
      Nanoquasicrystalline phase formation in binary Zr-Pd and Zr-Pt alloys

      ACTA MATERIALIA
    22. Testu, S; Rouxel, T; Besson, JL
      Tensile behaviour of gas pressure sintered silicon nitride in the 1600-1700 degrees C temperature range

      ACTA MATERIALIA
    23. Huang, Y; Aziz, MJ; Hutchinson, JW; Evans, AG; Saha, R; Nix, WD
      Comparison of mechanical properties of Ni3Al thin films in disordered FCC and ordered L1(2) phases

      ACTA MATERIALIA
    24. Jacques, P; Furnemont, Q; Pardoen, T; Delannay, F
      On the role of martensitic transformation on damage and cracking resistance in trip-assisted multiphase steels

      ACTA MATERIALIA
    25. Konosu, S; Mashiba, H; Takeshima, M; Ohtsuka, T
      Effects of pretest aging on creep crack growth properties of type 308 austenitic stainless steel weld metals

      ENGINEERING FAILURE ANALYSIS
    26. Saida, J; Matsushita, M; Inoue, A
      Transformation of nano icosahedral phase in Zr65Al7.5Ni10Cu17.5-xPdx (x=0 to 4) glassy alloys

      MATERIALS TRANSACTIONS
    27. Ishihara, S; Inoue, A
      Superplastic deformation of supercooled liquid in Zr-based bulk glassy alloys containing nano-quasicrystalline particles

      MATERIALS TRANSACTIONS
    28. Iwasaki, H; Kariya, R; Mabuchi, M; Tagata, T; Higashi, K
      Effects of temperature and strain rate on elongation at elevated temperature in Al-4.5Mg alloy

      MATERIALS TRANSACTIONS
    29. Inoue, A; Zhang, T; Kurosaka, K; Zhang, W
      High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti-Be system

      MATERIALS TRANSACTIONS
    30. Inoue, A; Zhang, W; Zhang, T; Kurosaka, K
      Cu-based bulk glassy alloys with good mechanical properties in Cu-Zr-Hf-Tisystem

      MATERIALS TRANSACTIONS
    31. Yamamoto, Y; Hashimoto, K; Kimura, T; Nakamura, M; Kohno, N
      Residual strain in mechanically ground powders of Al-Ti base ternary and quaternary compounds with L1(2) single-phase at 1450 K

      MATERIALS TRANSACTIONS
    32. Inoue, A; Zhang, W; Zhang, T; Kurosaka, K
      Thermal and mechanical properties of Cu-based Cu-Zr-Ti bulk glassy alloys

      MATERIALS TRANSACTIONS
    33. Yokoyama, Y; Yamano, K; Fukaura, K; Sunada, H; Inoue, A
      Enhancement of ductility and plasticity of Zr55Cu30Al10Ni5 bulk glassy alloy by cold rolling

      MATERIALS TRANSACTIONS
    34. Zhang, T; Kurosaka, K; Inoue, A
      Thermal and mechanical properties of Cu-based Cu-Zr-Ti-Y bulk glassy alloys

      MATERIALS TRANSACTIONS
    35. Kanahashi, H; Mukai, T; Yamada, Y; Shimojima, K; Mabuchi, M; Aizawa, T; Higashi, K
      Improvement of crashworthiness in ultra lightweight metallic foam by heat-treatment for microstructural modification of base material

      MATERIALS TRANSACTIONS
    36. Tamura, Y; Yasui, H; Marukawa, H
      Non-elastic responses of tall steel buildings subjected to across-wind forces

      WIND AND STRUCTURES
    37. Pam, HJ; Kwan, AKH; Ho, JCM
      Post-peak behavior and flexural ductility of doubly reinforced normal- andhigh-strength concrete beams

      STRUCTURAL ENGINEERING AND MECHANICS
    38. Mo, YL; Jeng, CH; Perng, SF
      Seismic shear behavior of rectangular hollow bridge columns

      STRUCTURAL ENGINEERING AND MECHANICS
    39. Grosdidier, T; Liao, HL; Lenhard, S; Tidu, A; Revol, S
      Processing and characterisation of nanocrystalline iron aluminide coatingsprepared by thermal spraying of milled powders

      JOURNAL DE PHYSIQUE IV
    40. Tonneau, A; Henaff, G
      Tensile and fatigue properties as influenced by environment of a FeAl alloy prepared by mechanical alloying

      JOURNAL DE PHYSIQUE IV
    41. Tellkamp, VL; Melmed, A; Lavernia, EJ
      Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    42. Kim, SJ; Lee, CG; Choi, I; Lee, S
      Effects of heat treatment and alloying elements on the microstructures andmechanical properties of 0.15 wt pct C transformation-induced plasticity-aided cold-rolled steel sheets

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    43. Henaff, G; Tonneau, A
      Environment-sensitive fracture of iron aluminides under monotonic tensile loading

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    44. Duong, K; Mohamed, FA
      Effect of impurity type on boundary sliding behavior in the superplastic Zn-22 pct Al alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    45. Lahaie, DJ; Bouchard, M
      Physical modeling of the deformation mechanisms of semisolid bodies and a mechanical criterion for hot tearing

      METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
    46. McQueen, HJ; Fry, E; Belling, J
      Comparative constitutive constants for hot working of Al-4.4Mg-0.7Mn (AA5083)

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    47. Lieu, HY; Pan, YT; Hsieh, RL; Tsai, WT
      Effects of alloying elements on the mechanical properties and corrosion behaviors of 2205 duplex stainless steels

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    48. Nakano, M; Nagayama, H; Sakuma, T
      Superplasticity in cation-doped YSZ

      JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    49. Kong, QP; Cai, B; Lu, L; Lu, K
      The creep of nanocrystalline metals and its connection with grain boundarydiffusion

      DEFECTS AND DIFFUSION IN METALS III
    50. Royer-Carfagni, G
      Can a moment-curvature relationship describe the flexion of softening beams?

      EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
    51. Miyazaki, H; Iseki, T; Yano, T
      New constitutive equation, including grain coarsening effect, for superplastic ceramics

      BRITISH CERAMIC TRANSACTIONS
    52. Varin, RA; Song, YK
      Effects of environment on fracture toughness of binary and ternary nickel silicide-based intermetallics

      INTERMETALLICS
    53. Wu, MY; Zhu, J; Wan, XJ
      The effect of B addition on charge distribution in Co3Ti

      INTERMETALLICS
    54. Guo, JT; Cui, CY; Chen, YX; Li, DX; Ye, HQ
      Microstructure, interface and mechanical property of the DS NiAl/Cr(Mo,Hf)composite

      INTERMETALLICS
    55. Wang, JL; Chung, YW
      Effects of boron on water dissociation and surface diffusivity of hydrogenon Ni-3(Al,Ti)(110) single crystal surfaces

      INTERMETALLICS
    56. Demura, M; Suga, Y; Umezawa, O; Kishida, K; George, EP; Hirano, T
      Fabrication of Ni3Al thin foil by cold-rolling

      INTERMETALLICS
    57. Wright, JL; Zhu, JH; Horton, JA; Heatherly, L
      Effect of boron doping on the mechanical properties of ordered Ni-Mo alloys

      INTERMETALLICS
    58. Sharif, AA; Misra, A; Petrovic, JJ; Mitchell, TE
      Alloying of MoSi2 for improved mechanical properties

      INTERMETALLICS
    59. Yang, D; Conrad, H
      Exploratory study into the effects of an electric field and of high current density electropulsing on the plastic deformation of TiAl

      INTERMETALLICS
    60. Wu, D; Baker, I
      The effect of environment and strain rate on the room temperature tensile properties of FeAl single crystals

      INTERMETALLICS
    61. Liu, KW; Mucklich, F; Birringer, R
      Synthesis of nano-RuAl by mechanical alloying

      INTERMETALLICS
    62. Besson, JL; Doucey, B; Lucas, S; Bahloul-Hourlier, D; Goursat, P
      SiCN nanocomposite: creep behaviour

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    63. Lee, YC; Chen, FK
      Fatigue life of cold-forging dies with various values of hardness

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    64. Chung, JH; Song, JS; Hong, SI
      Bundling and drawing processing of Cu-Nb microcomposites with various Nb contents

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    65. Nowosielski, R
      Ductility minimum temperature in selected mono-phase, binary brasses

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    66. Qiu, H; Mori, H; Enoki, M; Kishi, T
      Effect of welding thermal cycle and cold working on the ductility of SN490steel under low and high-speed loading

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    67. Imbert, CAC; McQueen, HJ
      Peak strength, strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    68. Imbert, CAC; McQueen, HJ
      Dynamic recrystallization of A2 and M2 tool steels

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    69. Liu, KW; Mucklich, F; Pitschke, W; Birringer, R; Wetzig, K
      Formation of nanocrystalline B2-structured (Ru,Ni)Al in the ternary Ru-Al-Ni system by mechanical alloying and its thermal stability

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    70. Kanahashi, H; Mukai, T; Yamada, Y; Shimojima, K; Mabuchi, M; Aizawa, T; Higashi, K
      Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    71. Kim, HS
      Hardening behaviour of partially crystallised amorphous Al alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    72. Froes, FH; Senkov, ON; Baburaj, EG
      Synthesis of nanocrystalline materials - an overview

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    73. Senkov, ON; Cavusoglu, M; Froes, FH
      Synthesis and characterization of a TiAl/Ti5Si3 composite with a submicrocrystalline structure

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    74. Seetharaman, V; Semiatin, SL
      Microstructures and tensile properties of Ti-45.5Al-2Nb-2Cr rolled sheets

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    75. Martin, CF; Blandin, JJ; Salvo, L
      Variations in microstructure and texture during high temperature deformation of Al-Mg alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    76. Han, SW; Kumai, S; Sato, A
      Origin of improved ductility in semi-liquid die-cast Al-7%Si-0.4%Mg alloys

      MATERIALS TRANSACTIONS JIM
    77. Akhlaghi, S; Yue, S
      Effect of thermomechanical processing on the hot ductility of a Nb-Ti microalloyed steel

      ISIJ INTERNATIONAL
    78. Sreejith, PS; Ngoi, BKA
      Material removal mechanisms in precision machining of new materials

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    79. Lawler, JS; Keane, DT; Shah, SP
      Measuring three-dimensional damage in concrete under compression

      ACI MATERIALS JOURNAL
    80. Khayat, KH; Paultre, P; Tremblay, S
      Structural performance and in-place properties of self-consolidating concrete used for casting highly reinforced columns

      ACI MATERIALS JOURNAL
    81. Palmquist, SM; Jansen, DC
      Postpeak strain-stress relationship for concrete in compression

      ACI MATERIALS JOURNAL
    82. Dew, M; Sexsmith, R; Weiler, G
      Effect of hinge zone tie spacing on ductility of concrete tilt-up frame panels

      ACI STRUCTURAL JOURNAL
    83. Vijay, PV; GangaRao, HVS
      Bending behavior and deformability of glass fiber-reinforced polymer reinforced concrete members

      ACI STRUCTURAL JOURNAL
    84. Yeh, YK; Mo, YL; Yang, CY
      Seismic performance of hollow circular bridge piers

      ACI STRUCTURAL JOURNAL
    85. Khaloo, AR; Bozorgzadeh, A
      Influence of confining hoop flexural stiffness on behavior of high-strength lightweight concrete columns

      ACI STRUCTURAL JOURNAL
    86. Lambert-Aikhionbare, N; Tabsh, SW
      Confinement of high-strength concrete with welded wire reinforcement

      ACI STRUCTURAL JOURNAL
    87. Weiss, WJ; Guler, K; Shah, SP
      Localization and size-dependent response of reinforced concrete beams

      ACI STRUCTURAL JOURNAL
    88. Takiguchi, K; Abdullah
      Shear strengthening of reinforced concrete columns using ferrocement jacket

      ACI STRUCTURAL JOURNAL
    89. Saiidi, MS; Moore, RT; Itani, A
      Seismic performance of reinforced concrete bridges with unconventional configurations

      ACI STRUCTURAL JOURNAL
    90. Paultre, P; Legeron, F; Mongeau, D
      Influence of concrete strength and transverse reinforcement yield strengthon behavior of high-strength concrete columns

      ACI STRUCTURAL JOURNAL
    91. Mei, H; Kiousis, PD; Ehsani, MR; Saadatmanesh, H
      Confinement effects on high-strength concrete

      ACI STRUCTURAL JOURNAL
    92. Foster, SJ
      On behavior of high-strength concrete columns: Cover spalling, steel fibers, and ductility

      ACI STRUCTURAL JOURNAL
    93. Lin, CH; Lee, FS
      Ductility of high-performance concrete beams with high-strength lateral reinforcement

      ACI STRUCTURAL JOURNAL
    94. Angelakos, D; Bentz, EC; Collins, MP
      Effect of concrete strength and minimum stirrups on shear strength of large members

      ACI STRUCTURAL JOURNAL
    95. Riva, P; Franchi, A
      Behavior of reinforced concrete walls with welded wire mesh subjected to cyclic loading

      ACI STRUCTURAL JOURNAL
    96. Grace, NF
      Strengthening of negative moment region of reinforced concrete beams usingcarbon fiber-reinforced polymer strips

      ACI STRUCTURAL JOURNAL
    97. Wang, YC; Restrepo, JI
      Investigation of concentrically loaded reinforced concrete columns confined with glass fiber-reinforced polymer jackets

      ACI STRUCTURAL JOURNAL
    98. Panagiotakos, TB; Fardis, MN
      Deformations of reinforced concrete members at yielding and ultimate

      ACI STRUCTURAL JOURNAL
    99. Marzouk, H; Osman, M; Hussein, A
      Cyclic loading of high-strength lightweight concrete slabs

      ACI STRUCTURAL JOURNAL
    100. Abo-Shadi, NA; Saiidi, MS; Sanders, DH
      Performance-based design of confinement reinforcement in reinforced concrete bridge pier walls for out-of-plane seismic loads

      ACI STRUCTURAL JOURNAL


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 29/10/20 alle ore 12:14:57