Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'DIE' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 927 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Sombatsompop, N; Panaploy, A
      Die geometry effects on the temperature profile measurements of flowing PPmelt in a twin-screw extruder

      POLYMER TESTING
    2. Liang, JZ
      The elastic behaviour during capillary extrusion of LDPE/LLDPE blend melts

      POLYMER TESTING
    3. Rosca, ID; Vergnaud, JM
      New way of using rheometers in scanning mode for the cure of rubbers

      POLYMER
    4. Lesage, P; Portenoy, RK
      Ethical challenges in the care of patients with serious illness

      PAIN MEDICINE
    5. Iyengar, M; Bar-Cohen, A
      Design for manufacturability of SISE parallel plate forced convection heatsinks

      IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    6. Moore, TD; Jarvis, JL
      Failure analysis and stress simulation in small multichip BGAs

      IEEE TRANSACTIONS ON ADVANCED PACKAGING
    7. Mercado, LL; Lee, TY; Cook, J
      Integrated transient thermal and mechanical analysis of molded PBGA packages during thermal shock

      IEEE TRANSACTIONS ON ADVANCED PACKAGING
    8. Leblanc, JL
      Wall slip and compressibility like effects in capillary rheometer tests oncomplex polymer systems

      PLASTICS RUBBER AND COMPOSITES
    9. Sanson, G; Read, J; Aranwela, N; Clissold, F; Peeters, P
      Measurement of leaf biomechanical properties in studies of herbivory: Opportunities, problems and procedures

      AUSTRAL ECOLOGY
    10. Varga, I
      Macroinvertebrates in reed litter

      INTERNATIONAL REVIEW OF HYDROBIOLOGY
    11. Frei, A; Schenker, TA; Finzen, A; Krauchi, K; Dittmann, V; Hoffmann-Richter, U
      Assisted suicide as conducted by a "Right-to-Die"-society in Switzerland: A descriptive analysis of 43 consecutive cases

      SWISS MEDICAL WEEKLY
    12. Liu, XL
      Numerical modeling on pultrusion of composite I beam

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    13. Nishida, Y; Arima, H; Kim, JC; Ando, T
      Rotary-die equal-channel angular pressing of an A1-7 mass% Si-0.35 mass% Mg alloy

      SCRIPTA MATERIALIA
    14. Kashihara, K; Inoko, F
      Effect of piled-up dislocations on strain induced boundary migration (SIBM) in deformed aluminum bicrystals with originally Sigma 3 twin boundary

      ACTA MATERIALIA
    15. Samajdar, I; Ratchev, P; Verlinden, B; Aernoudt, E
      Hot working of AA10 - Relating the microstructural and textural developments

      ACTA MATERIALIA
    16. Kosec, B; Kosec, L; Kopac, J
      Analysis of casting die failures

      ENGINEERING FAILURE ANALYSIS
    17. Riga, AT; Scott, CG
      Failure analysis of an abrasive cut-off wheel

      ENGINEERING FAILURE ANALYSIS
    18. Gagg, CR
      Premature failure of thread rolling dies: material selection, hardness criteria and case studies

      ENGINEERING FAILURE ANALYSIS
    19. Okumiya, M; Tsunekawa, Y; Fukaya, K; Mohri, N
      Formation of TiC/Ti2AlC composite layer and improvement on surface roughness

      MATERIALS TRANSACTIONS
    20. Ono, S; Asami, K; Masuko, N
      Mechanism of chemical conversion coating film growth on magnesium and magnesium alloys

      MATERIALS TRANSACTIONS
    21. Li, Y
      A relationship between glass-forming ability and reduced glass transition temperature near eutectic composition

      MATERIALS TRANSACTIONS
    22. Francillette, H; Bacroix, B; Lebensohn, RA; Bechade, JL
      Final textures in cold rolled Zr702 alpha polycrystalline samples

      JOURNAL DE PHYSIQUE IV
    23. Finkel, NJ; Watanabe, H; Crystal, DS
      Commonsense notions of unfairness in Japan and the United States

      PSYCHOLOGY PUBLIC POLICY AND LAW
    24. Hoffmann, SC; Bleiweis, MS; Jones, DR; Paik, HC; Ciriaco, P; Egan, TM
      Maintance of cAMP in non-heart-beating donor lungs reduces ischemia-reperfusion injury

      AMERICAN JOURNAL OF RESPIRATORY AND CRITICAL CARE MEDICINE
    25. Peacock, MA; Heath, WP; Grannemann, BD
      Attitudes toward physician-assisted suicide: Effects of physician background, patient prognosis and patient mental health status

      PSYCHOLOGY CRIME & LAW
    26. Corlett, JA
      Is there a moral duty to die ?

      HEALTH CARE ANALYSIS
    27. Chakraborty, K; Kulkarni, S; Bhattacharya, M; Mazumder, P; Gupta, A
      A physical design tool for built-in self-repairable RAMs

      IEEE TRANSACTIONS ON VERY LARGE SCALE INTEGRATION (VLSI) SYSTEMS
    28. Alter, P; Jobmann, M; Meyer, E; Pankuweit, S; Maisch, B
      Apoptosis in myocarditis and dilated cardiomyopathy: Does enterovirus genome persistence protect from apoptosis? - An endomyocardial biopsy study

      CARDIOVASCULAR PATHOLOGY
    29. Baduini, CL; Hyrenbach, KD; Coyle, KO; Pinchuk, A; Mendenhall, V; Hunt, GL
      Mass mortality of short-tailed shearwaters in the south-eastern Bering Seaduring summer 1997

      FISHERIES OCEANOGRAPHY
    30. Ha, HS; Oh, SS; Ha, DW; Kim, SC; Kwon, YK; Ryu, KS; Joo, JH
      The effects of drawing parameters on sausaging and critical current density of Bi-2223/Ag HTS wires

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    31. Han, JB
      Flip-chip BGA design to avert die cracking

      JOURNAL OF ELECTRONIC PACKAGING
    32. Martel, J
      Examining the foreseeable: Assisted suicide as a herald of changing moralities

      SOCIAL & LEGAL STUDIES
    33. Eriksson, E
      Caring for cancer patients: relatives' assessments of received care

      EUROPEAN JOURNAL OF CANCER CARE
    34. Moisan, JF; Jen, CK; Liaw, JW; Zheng, CQ; Chen, TF; Sun, Z; Loong, CA
      Ultrasonic sensor and technique for in-line monitoring of die casting process

      MEASUREMENT SCIENCE & TECHNOLOGY
    35. Tang, DB; Li, DB; Zhang, SQ
      A conceptual approach for the die structure design

      JOURNAL OF INTELLIGENT MANUFACTURING
    36. Khan, AU; Briscoe, BJ; Luckham, PF
      Evaluation of slip in capillary extrusion of ceramic pastes

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    37. Doege, E; Meinen, J; Neumaier, T; Schaprian, M
      Numerical design of a new forging press drive incorporating non-circular gears

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    38. Soar, R; Dickens, P
      Design limits of unbonded laminate tooling for pressure die-casting

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    39. Park, K; Lee, YK; Yang, DY; Lee, DH
      Design and analysis of hollow section extrusion of the underframe part of a railroad vehicle using mismatching refinement with domain decomposition

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    40. Sekine, F
      Estimation of the synthetic dynamic accuracy of the die and the press by considering the eccentric load in blanking

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    41. Bonnavand, F; Bramley, AN; Mynors, DJ
      A fast new numerical tool for designing prestressed dies for backward extrusion Part 1: die behaviour

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    42. Bonnavand, F; Bramley, AN; Mynors, DJ
      A fast new numerical tool for designing prestressed dies for backward extrusion Part 2: numerical analysis

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    43. Manas, S; Trmal, GJ; Ackerman, M
      Reducing pressure transients in hydraulic circuits of die casting machinesto improve the quality of the produced components

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
    44. Gohlisch, HJ
      Recent developments in extrusion of tire components

      KAUTSCHUK GUMMI KUNSTSTOFFE
    45. Ashida, F
      Temperature and stress analysis of an elastic circular cylinder in contactwith heated rigid stamps

      ARCHIVE OF APPLIED MECHANICS
    46. Zhang, ZM; Shen, HS; Sun, FH; He, XC; Wan, YZ
      Fabrication and application of chemical vapor deposition diamond-coated drawing dies

      DIAMOND AND RELATED MATERIALS
    47. Comstock, RJ; Li, KP; Wagoner, RH
      Simulation of axisymmetric sheet forming tests

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    48. Cao, J; Li, SP; Xia, ZC; Tang, SC
      Analysis of an axisymmetric deep-drawn part forming using reduced forming steps

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    49. MacCormack, C; Monaghan, J
      Failure analysis of cold forging dies using FEA

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    50. Wu, RH; Liu, JT; Chang, HB; Hsu, TY; Ruan, XY
      Prediction of the flow stress of 0.4C-1.9Cr-1.5Mn-1.0Ni-0.2Mo steel duringhot deformation

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    51. Lin, ZC; Deng, CH
      Analysis of a torque equilibrium model and the optimal strip working sequence for a shearing-cut and bending progressive die

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    52. Fu, MW; Huang, MH
      Process parameters and products quality analysis of flexible-die deep-drawing using a viscoplastic pressure-carrying medium

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    53. Balendra, R
      Overview of "die-cavity elasticity considerations for nett-forming (DICAVITY)"

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    54. Lu, X; Balendra, R
      Finite element simulation for die-cavity compensation

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    55. Lu, X; Balendra, R
      Temperature-related errors on aerofoil section of turbine blade

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    56. Ravn, BG; Andersen, CB; Wanheim, T
      Verification of the component accuracy prediction obtained by physical modelling and the elastic simulation of the die/component interaction

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    57. Balendra, R
      Economic considerations in die-form compensation for nett-forming

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    58. Hortig, D; Schmoeckel, D
      Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    59. Carneiro, OS; Nobrega, JM; Pinho, FT; Oliveira, PJ
      Computer aided rheological design of extrusion dies for profiles

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    60. Hua, M; Lu, SQ
      FEM simulation of the flat-die preform forging of steel shaft-disc type components by thermal differential heating

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    61. Lee, YK; Lee, SR; Lee, CH; Yang, DY
      Process modification of bevel gear forging using three-dimensional finite element analysis

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    62. Saotome, Y; Miwa, S; Zhang, T; Inoue, A
      The micro-formability of Zr-based amorphous alloys in the supercooled liquid state and their application to micro-dies

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    63. Jang, DH; Ryou, TK; Yoon, DY; Hwang, BB
      The process sequence design of a power-assisted steering part

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    64. Ko, BD; Kim, DJ; Lee, SH; Hwang, BB
      The influence of die geometry on the radial extrusion processes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    65. Lee, YC; Chen, FK
      Fatigue life of cold-forging dies with various values of hardness

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    66. Jeong, DJ; Kim, DJ; Kim, JH; Kim, BM; Dean, TA
      Effects of surface treatments and lubricants for warm forging die life

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    67. Park, DH; Kang, SS; Park, SB
      A study on the improvement of formability for elliptical deep drawing processes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    68. Takiguchi, M; Yoshida, F
      Plastic bending of adhesive-bonded sheet metals

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    69. Lee, KS; Huh, H
      Numerical simulation of the superplastic moving die forming process with amodified membrane finite element method

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    70. Kim, SH; Kim, SH; Huh, H
      Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    71. Singh, S; Jha, AK
      Analysis of dynamic effects during high-speed forging of sintered preforms

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    72. Ryu, CH; Joun, MS
      Finite element simulation of the cold forging process having a floating die

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    73. Oh, SI; Wu, WT; Arimoto, K
      Recent developments in process simulation for bulk farming processes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    74. Alinger, MJ; Van Tyne, CJ
      Evolution of the tribological characteristics of several forming die materials

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    75. Yang, DY; Park, K; Kang, YS
      Integrated finite element simulation for the hot extrusion of complicated Al alloy profiles

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    76. Kang, CG; Jung, HK; Jung, KW
      Thixoforming of an aluminum component with a die designed by process simulation

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    77. Jeong, JH; Yang, DY
      Application of an adaptive grid refinement technique to three-dimensional finite element analysis of the filling stage in the die-casting process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    78. Ranatunga, V; Gunasekera, JS; Frazier, WG; Hur, KD
      Use of UBET for design of flash gap in closed-die forging

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    79. Konnerth, U
      A hydraulic high-speed tryout press for the simulation of mechanical forming processes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    80. Kim, C; Kim, BM; Choi, JC
      Development of an integrated computer-aided process planning system for press working products

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    81. Wilczynski, K
      SSEM: a computer model for a polymer single-screw extrusion

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    82. Kim, KT; Yang, HC
      Densification behavior of titanium alloy powder during hot pressing

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    83. Rivoirard, S; de Rango, P; Fruchart, D; Chastel, Y; Martin, CL
      Rheological study of hot-forged NdFeB and related permanent magnet properties

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    84. Han, SW; Kumai, S; Sato, A
      Fatigue crack growth behavior in semi-liquid die-cast Al-7%Si-0.4%Mg alloys with fine effective grain structure

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    85. Huang, WH; Chang, L; Kao, PW; Chang, CP
      Effect of die angle on the deformation texture of copper processed by equal channel angular extrusion

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    86. Saotome, Y; Hatori, T; Zhang, T; Inoue, A
      Superplastic micro/nano-formability of La60Al20Ni10Co5Cu5 amorphous alloy in supercooled liquid state

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    87. Kim, SW; Kim, DY; Kim, WG; Woo, KD
      The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    88. Park, H; Kim, KT
      Consolidation behavior of SiC powder under cold compaction

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    89. Han, SW; Kumai, S; Sato, A
      Origin of improved ductility in semi-liquid die-cast Al-7%Si-0.4%Mg alloys

      MATERIALS TRANSACTIONS JIM
    90. Nye, TJ
      Optimal nesting of irregular convex blanks in strips via an exact algorithm

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    91. Faura, F; Lopez, J; Hernandez, J
      On the optimum plunger acceleration law in the slow shot phase of pressuredie casting machines

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    92. Royer, JR; DeSimone, JM; Khan, SA
      High-pressure rheology and viscoelastic scaling predictions of polymer melts containing liquid and supercritical carbon dioxide

      JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
    93. Izquierdo-Porrera, AM; Trelis-Navarro, J; Gomez-Batiste, X
      Predicting place of death of elderly cancer patients followed by a palliative care unit

      JOURNAL OF PAIN AND SYMPTOM MANAGEMENT
    94. Whitney, SN; Brown, BW; Brody, H; Aloser, KH; Bachman, JG; Greely, HT
      Views of United States physicians and members of the American Medical Association House of Delegates on physician-assisted suicide

      JOURNAL OF GENERAL INTERNAL MEDICINE
    95. Schwarcz, HP; Rink, WJ
      Dating methods for sediments of caves and rockshelters

      GEOARCHAEOLOGY-AN INTERNATIONAL JOURNAL
    96. Chou, KY; Chen, MJ
      ESD protection under grounded-up bond pads in 0.13 mu m eight-level coppermetal, fluorinated silicate glass low-k intermetal dielectric CMOS processtechnology

      IEEE ELECTRON DEVICE LETTERS
    97. Sano, Y
      Drying behavior of acetate filament in dry spinning

      DRYING TECHNOLOGY
    98. Tang, ST; McCorkle, R
      Determinants of place of death for terminal cancer patients

      CANCER INVESTIGATION
    99. Klecka, GM; Gonsior, SJ; West, RJ; Goodwin, PA; Markham, DA
      Biodegradation of bisphenol a in aquatic environments: River die-away

      ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY
    100. Kulikov, OL; Hornung, K
      A simple geometrical solution to the surface fracturing problem in extrusion processes

      JOURNAL OF NON-NEWTONIAN FLUID MECHANICS


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 31/05/20 alle ore 07:50:42