Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'CRACKING' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 3265 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. MONTES H G; DUPLAY J; MARTINEZ L; ESCOFFIER S; ROUSSET D
      Structural modifications of Callovo-oxfordian argillite under hyration/dehydration conditions

      Applied clay science
    2. Cortright, RD; Dumesic, JA
      Kinetics of heterogeneous catalytic reactions: Analysis of reaction schemes

      ADVANCES IN CATALYSIS, VOL 46
    3. Cai, HY; Krzywicki, A; Oballa, MC
      Coke formation in steam crackers for ethylene production

      CHEMICAL ENGINEERING AND PROCESSING
    4. Brader, B; Lee, RC; Plarre, R; Burkholder, W; Kitto, GB; Kao, C; Polston, L; Dorneanu, E; Szabo, I; Mead, B; Rouse, B; Sullins, D; Denning, R
      A comparison of screening methods for insect contamination in wheat

      JOURNAL OF STORED PRODUCTS RESEARCH
    5. Gillis, KM
      The rootzone of an ancient hydrothermal system exposed in the Troodos ophiolite, Cyprus

      JOURNAL OF GEOLOGY
    6. Pantelakis, SG; Kyriakakis, EC; Papanikos, P
      Non-destructive fatigue damage characterization of laminated thermosettingfibrous composites

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    7. Plug, LJ; Werner, BT
      Fracture networks in frozen ground

      JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
    8. Xiao, Y
      Modeling the kinetics and mechanisms of petroleum and natural gas generation: A first principles approach

      MOLECULAR MODELING THEORY: APPLICATIONS IN THE GEOSCIENCES
    9. Beulke, S; Brown, CD; Dubus, IG; Harris, G
      Evaluation of uncalibrated preferential flow models against data for isoproturon movement to drains through a heavy clay soil

      PEST MANAGEMENT SCIENCE
    10. Fan, XJ; Wang, HB; Lim, TB
      Investigation of the underfill delamination and cracking in flip-chip modules under temperature cyclic loading

      IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    11. Kotrel, S; Lunsford, JH; Knozinger, H
      Characterizing zeolite acidity by spectroscopic and catalytic means: A comparison

      JOURNAL OF PHYSICAL CHEMISTRY B
    12. Winkler, B; Hofstetter, G; Niederwanger, G
      Experimental verification of a constitutive model for concrete cracking

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    13. Jarvis, EAA; Hayes, RL; Carter, EA
      Effects of oxidation on the nanoscale mechanisms of crack formation in aluminum

      CHEMPHYSCHEM
    14. Werner, D; Werner, B
      Compaction and recovery of soil structure in a silty clay soil (Chernozem): physical, computer tomographic, and scanning electron microscopic investigations

      JOURNAL OF PLANT NUTRITION AND SOIL SCIENCE-ZEITSCHRIFT FUR PFLANZENERNAHRUNG UND BODENKUNDE
    15. Baugis, GL; Brito, HF; de Oliveira, W; de Castro, FR; Sousa-Aguiar, EF
      The luminescent behavior of the steamed EuY zeolite incorporated with vanadium and rare earth passivators

      MICROPOROUS AND MESOPOROUS MATERIALS
    16. Masuda, T; Fukumoto, N; Kitamura, M; Mukai, SR; Hashimoto, K; Tanaka, T; Funabiki, T
      Modification of pore size of MFI-type zeolite by catalytic cracking of silane and application to preparation of H-2-separating zeolite membrane

      MICROPOROUS AND MESOPOROUS MATERIALS
    17. Triantafillidis, CS; Vlessidis, AG; Nalbandian, L; Evmiridis, NP
      Effect of the degree and type of the dealumination method on the structural, compositional and acidic characteristics of H-ZSM-5 zeolites

      MICROPOROUS AND MESOPOROUS MATERIALS
    18. Oumi, Y; Takagi, H; Sumiya, S; Mizuno, R; Uozumi, T; Sano, T
      Novel post-synthesis alumination method for MCM-41 using trimethylaluminum

      MICROPOROUS AND MESOPOROUS MATERIALS
    19. Gedeon, A; Lassoued, A; Bonardet, JL; Fraissard, J
      Surface acidity diagnosis and catalytic activity of AlSBA materials obtained by direct synthesis

      MICROPOROUS AND MESOPOROUS MATERIALS
    20. Masuda, T; Kushino, T; Matsuda, T; Mukai, SR; Hashimoto, K; Yoshida, S
      Chemical recycling of mixture of waste plastics using a new reactor systemwith stirred heat medium particles in steam atmosphere

      CHEMICAL ENGINEERING JOURNAL
    21. Wauters, S; Marin, GB
      Computer generation of a network of elementary steps for coke formation during the thermal cracking of hydrocarbons

      CHEMICAL ENGINEERING JOURNAL
    22. Berger, RJ; Stitt, EH; Marin, GB; Kapteijn, F; Moulijn, JA
      Eurokin - Chemical reaction kinetics in practice

      CATTECH
    23. Philippou, A; Dwyer, J; Ghanbari-Siahkali, A; Paze, C; Anderson, MW
      Solid-state NMR studies of n-butene isomerisation over H-ferrierite

      JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
    24. Lin, YH; Hwu, WH; Ger, MD; Yeh, TF; Dwyer, J
      A combined kinetic and mechanistic modelling of the catalytic degradation of polymers

      JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
    25. Zhang, ZF; Wang, ZG
      Cyclic deformation behaviour of a copper bicrystal with common primary slip planes

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    26. Lee, HT; Jeng, SL
      Characteristics of dissimilar welding of alloy 690 to 304L stainless steel

      SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
    27. John, S; Herszberg, I; Coman, F
      Longitudinal and transverse damage taxonomy in woven composite components

      COMPOSITES PART B-ENGINEERING
    28. Im, KH; Cha, CS; Kim, SK; Yang, IY
      Effects of temperature on impact damages in CFRP composite laminates

      COMPOSITES PART B-ENGINEERING
    29. Vejen, N; Pyrz, R
      Transverse crack growth in glass/epoxy composites with exactly positioned long fibres. Part I: experimental

      COMPOSITES PART B-ENGINEERING
    30. Ramsamooj, DV
      An innovative technique for using polymer composites in airport pavement rehabilitation

      COMPOSITES PART B-ENGINEERING
    31. Toribio, MG; Spearing, SM
      Compressive response of notched glass-fiber epoxy/honeycomb sandwich panels

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    32. Peters, PWM; Xia, Z; Hemptenmacher, J; Assler, H
      Influence of interfacial stress transfer on fatigue crack growth in SiC-fibre reinforced titanium alloys

      COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
    33. Shivanyuk, VN; Shanina, BD; Tarasenko, AV; Gavriljuk, VG; Foct, J
      Effect of hydrogen on atomic bonds in austenitic stainless steel

      SCRIPTA MATERIALIA
    34. Cleymand, F; Coupeau, C; Grilhe, J
      Experimental investigation of the instability of buckling patterns: From straight-sided to wormlike structures

      SCRIPTA MATERIALIA
    35. Dye, D; Hunziker, O; Reed, RC
      Numerical analysis of the weldability of superalloys

      ACTA MATERIALIA
    36. Teter, DF; Robertson, IM; Birnbaum, HK
      The effects of hydrogen on the deformation and fracture of beta-titanium

      ACTA MATERIALIA
    37. Cox, BN; Sridhar, N; Beyerlein, IJ
      Inertial effects in the pullout mechanism during dynamic loading of a bridged crack

      ACTA MATERIALIA
    38. Zimmerman, MH; Baskin, DM; Faber, KT; Fuller, ER; Allen, AJ; Keane, DT
      Fracture of a textured anisotropic ceramic

      ACTA MATERIALIA
    39. Pfaendtner, JA; McMahon, CJ
      Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures - An example of dynamic embrittlement

      ACTA MATERIALIA
    40. Huang, M; Suo, Z; Ma, Q
      Metal film crawling in interconnect structures caused by cyclic temperatures

      ACTA MATERIALIA
    41. Huang, Y; Aziz, MJ; Hutchinson, JW; Evans, AG; Saha, R; Nix, WD
      Comparison of mechanical properties of Ni3Al thin films in disordered FCC and ordered L1(2) phases

      ACTA MATERIALIA
    42. Yu, HH; He, MY; Hutchinson, JW
      Edge effects in thin film delamination

      ACTA MATERIALIA
    43. Zhang, J; Laird, C
      Fracture behavior of monofilament-reinforced multicrystalline copper composites

      ACTA MATERIALIA
    44. Saffarini, HS; Samra, RM
      Repair of a chemical industry jetty in Aqaba - Jordan

      MATERIALS AND STRUCTURES
    45. Cadoni, E; Labibes, K; Albertini, C; Berra, M; Giangrasso, M
      Strain-rate effect on the tensile behaviour of concrete at different relative humidity levels

      MATERIALS AND STRUCTURES
    46. Hu, SY; Zhu, XX
      A general framework for incorporating molecular modelling into overall refinery optimisation

      APPLIED THERMAL ENGINEERING
    47. Bulloch, JH; Roche, JJ
      Detailed integrity assessments of a hydro station load bearing chain

      ENGINEERING FAILURE ANALYSIS
    48. Fantechi, F; Innocenti, M
      Chloride stress corrosion cracking of precipitation hardening SS impellersin centrifugal compressor. Laboratory investigations and corrective actions

      ENGINEERING FAILURE ANALYSIS
    49. Viswanathan, R
      An investigation of blade failures in combustion turbines

      ENGINEERING FAILURE ANALYSIS
    50. Valiente, A
      Stress corrosion failure of large diameter pressure pipelines of prestressed concrete

      ENGINEERING FAILURE ANALYSIS
    51. Carter, TJ; Cornish, LA
      Hydrogen in metals

      ENGINEERING FAILURE ANALYSIS
    52. Gagg, CR
      Failure of stainless steel water pump couplings

      ENGINEERING FAILURE ANALYSIS
    53. Gao, S; Nakasa, K; Kato, M
      Simulation of cracking patterns in sprayed coating under equi-biaxial tension

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    54. Tohgo, K; Sugiyama, Y; Akizuki, K
      Ply-cracking damage theory for cross-ply laminate and its application to finite element method

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    55. Hagiwara, N; Meyer, M
      Evaluating hydrogen stress cracking of line pipe steels under cathodic protection using crack tip opening displacement tests

      JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    56. Cho, YT
      Elastic analysis of a cracked ellipsoidal inhomogeneity in an infinite body

      KSME INTERNATIONAL JOURNAL
    57. Ning, F; Mickleborough, NC; Chan, CM
      Service load response prediction of reinforced concrete flexural members

      STRUCTURAL ENGINEERING AND MECHANICS
    58. Mola, F; Gatti, MC; Meda, G
      Structural analysis of cracked RC members subjected to sustained loads andimposed deformations

      STRUCTURAL ENGINEERING AND MECHANICS
    59. Shen, SJ; Pfister, JC; Lee, JD
      Stress wave propagation in composite materials

      STRUCTURAL ENGINEERING AND MECHANICS
    60. Masoud, S; Soudki, K; Topper, T
      CFRP-strengthened and corroded RC beams under monotonic and fatigue loads

      JOURNAL OF COMPOSITES FOR CONSTRUCTION
    61. Van Speybroeck, V; Borremans, Y; Van Neck, D; Waroquier, M; Wauters, S; Saeys, M; Marin, GB
      Ab initio study of radical reactions: Cyclization pathways for the butylbenzene radical (II)

      JOURNAL OF PHYSICAL CHEMISTRY A
    62. Amenyah, W; Schiavone, P; Ru, CQ; Mioduchowski, A
      Interior cracking of a circular inclusion with imperfect interface under thermal loading

      MATHEMATICS AND MECHANICS OF SOLIDS
    63. Schwarz-Selinger, T; Preuss, R; Dose, V; von der Linden, W
      Analysis of multicomponent mass spectra applying Bayesian probability theory

      JOURNAL OF MASS SPECTROMETRY
    64. Bonnet, E; White, RL
      Catalytic microreactor with repetitive injection GC/MS effluent analysis

      INSTRUMENTATION SCIENCE & TECHNOLOGY
    65. Dye, D; Hunziker, O; Roberts, SM; Reed, RC
      Modeling of the mechanical effects induced by the tungsten inert-gas welding of the IN718 superalloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    66. Chen, W; Chaturvedi, MC; Richards, NL
      Effect of boron segregation at grain boundaries on heat-affected zone cracking in wrought INCONEL 718

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    67. Nagumo, M; Nakamura, M; Takai, K
      Hydrogen thermal desorption relevant to delayed-fracture susceptibility ofhigh-strength steels

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    68. Symons, DM; Young, GA; Scully, JR
      The effect of strain on the trapping of hydrogen at grain-boundary carbides in Ni-Cr-Fe alloys

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    69. Yi, YS; Was, GS
      Stress and temperature dependence of creep in Alloy 600 in primary water

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    70. Kertz, JE; Gouma, PI; Buchheit, RG
      Localized corrosion susceptibility of Al-Li-Cu-Mg-Zn alloy AF/C458 due to interrupted quenching from solutionizing temperatures

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    71. Johnson, DP
      Thermal cracking in scaled composite laminates

      JOURNAL OF ADVANCED MATERIALS
    72. Alves, H; Koster, U; Aghion, E; Eliezer, D
      Environmental behavior of magnesium and magnesium alloys

      MATERIALS TECHNOLOGY
    73. Handge, UA; Sokolov, IM; Blumen, A
      Disorder and plasticity in the fragmentation of coatings - art. no. 016109

      PHYSICAL REVIEW E
    74. Ben Rhouma, A; Braham, C; Fitzpatrick, ME; Ledion, J; Sidhom, H
      Effects of surface preparation on pitting resistance, residual stress, andstress corrosion cracking in austenitic stainless steels

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    75. Hoshide, T; Abe, J
      Grinding-induced residual stress estimation by indentation-fracture methodin ground silicon nitrides

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    76. Tsay, LW; Chen, WY; Shiue, RK; Shiue, RH
      Stress corrosion cracking of A588 steel weldments in flue gas related environments

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    77. Muhlstein, CL; Brown, SB; Ritchie, RO
      High-cycle fatigue of single-crystal silicon thin films

      JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
    78. Ohira, S; Nishijima, S
      Wire dynamics simulation of impregnated superconducting magnet

      IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    79. Buchheit, RG; Boger, RK; Carroll, MC; Leard, RM; Paglia, C; Searles, JL
      The electrochemistry of intermetallic particles and localized corrosion inAl alloys

      JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    80. Wang, AH; Xie, CS; Nie, JH
      Bond strength of a laser-clad iron-base alloy coating on Al-Si alloy substrate and its fracture behavior

      MATERIALS CHARACTERIZATION
    81. Widjaja, S
      Determination of creep-induced residual stress in fiber-reinforced glass-ceramic matrix composites by X-ray diffraction

      MATERIALS CHARACTERIZATION
    82. Sozanska, M; Sojka, J; Betakova, P; Dagbert, C; Hyspecka, L; Galland, J; Tvrdy, M
      Examination of hydrogen interaction in carbon steel by means of quantitative microstructural and fracture descriptions

      MATERIALS CHARACTERIZATION
    83. Yang, FQ; Kao, I
      Free abrasive machining in slicing brittle materials with wiresaw

      JOURNAL OF ELECTRONIC PACKAGING
    84. Demirci, UB; Garin, F
      From bifunctional site to metal-proton adduct site in alkane reforming reactions on sulphated-zirconia-supported Pt or Pd or Ir catalysts

      CATALYSIS LETTERS
    85. Sohn, JR; Ryu, SG
      Redox and catalytic behaviors of chromium oxide supported on zirconia

      CATALYSIS LETTERS
    86. Mao, RLV; Melancon, S; Gauthier-Campbell, C; Kletnieks, P
      Selective deep catalytic cracking process (SDCC) of petroleum feedstocks for the production of light olefins. I. The Catlever effect obtained with a two reaction-zones system on the conversion of n-hexane

      CATALYSIS LETTERS
    87. Jentoft, RE; Gates, BC
      H-D exchange between CD4 and solid acids: AlCl3/sulfonic acid resin, promoted and unpromoted sulfated zirconia, and zeolite HZSM-5

      CATALYSIS LETTERS
    88. Zhang, XY; Han, EH; Du, YL
      Study of in-situ electrochemical SSCC/HE susceptibility probe

      JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    89. Chu, WY; Qiao, LJ; Gao, KW
      Investigation of stress corresion cracking under anodic dissolution control

      CHINESE SCIENCE BULLETIN
    90. Shaikh, H; George, G; Shneider, F; Mummert, K; Khatak, HS
      Effect of high temperature aging on the corrosion behaviour of nitrogen added AISI type 316 stainless steel weld metal

      TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
    91. Zaykina, RF; Zaykin, YA; Mamonova, TB; Nadirov, NK
      Radiation-thermal processing of high-viscous oil from Karazhanbas field

      RADIATION PHYSICS AND CHEMISTRY
    92. Fujita, N; Matsuura, C; Saigo, K
      Radiation-induced preferential dissolution of specific planes of carbon steel in high-temperature water

      RADIATION PHYSICS AND CHEMISTRY
    93. Roy, AK; Spragge, MK; Fleming, DL; Lum, BY
      Cracking of titanium alloys under cathodic applied potential

      MICRON
    94. Gomes, HM; Awruch, AM
      Some aspects on three-dimensional numerical modelling of reinforced concrete structures using the finite element method

      ADVANCES IN ENGINEERING SOFTWARE
    95. Bashenov, SL; Lyulevich, VV; Tsianpin, H; Yaminskii, IV; VOlynskii, AL; Bakeev, NF
      Experimental and theoretical estimation of amplitude of microwave formed under deformation of polymer film with a rigid coating

      POLYMER SCIENCE SERIES A
    96. Schutze, M; Ito, S; Przybilla, W; Echsler, H; Bruns, C
      Test methods and data on the mechanical properties of protective oxide scales

      MATERIALS AT HIGH TEMPERATURES
    97. Ajbar, A
      Stabilization of chaotic behavior in a two-phase autocatalytic reactor

      CHAOS SOLITONS & FRACTALS
    98. Elnashaie, SSEH; Harraz, HM; Abashar, ME
      Homoclinical chaos and the period-adding route to complex non-chaotic attractors in fluidized bed catalytic reactors

      CHAOS SOLITONS & FRACTALS
    99. Kasper, JN; Allard, M
      Late-Holocene climatic changes as detected by the growth and decay of ice wedges on the southern shore of Hudson Strait, northern Quebec, Canada

      HOLOCENE
    100. Sglavo, VM; Green, DJ
      Fatigue limit in fused silica

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 30/05/20 alle ore 01:51:01