Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. MacLachlan, DW; Knowles, DM
   Fatigue behaviour and lifing of two single crystal superalloys
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
   
   D.W. MacLachlan e D.M. Knowles, "Fatigue behaviour and lifing of two single crystal superalloys", FATIG FRACT, 24(8), 2001, pp. 503-521
2. Lykins, CD; Mall, S; Jain, V
   A shear stress-based parameter for fretting fatigue crack initiation
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
   
   C.D. Lykins et al., "A shear stress-based parameter for fretting fatigue crack initiation", FATIG FRACT, 24(7), 2001, pp. 461-473
3. Brandt, U; Lawrence, FV; Sonsino, CM
   Fatigue crack initiation and growth in AlMg4.5Mn butt weldments
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
   
   U. Brandt et al., "Fatigue crack initiation and growth in AlMg4.5Mn butt weldments", FATIG FRACT, 24(2), 2001, pp. 117-126
4. Diamantakos, ID; Lebeas, GN; Pantelakis, SG; Kermanidis, TB
   A model to assess the fatigue behaviour of ageing aircraft fuselage
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
   
   I.D. Diamantakos et al., "A model to assess the fatigue behaviour of ageing aircraft fuselage", FATIG FRACT, 24(10), 2001, pp. 677-686
5. Eberhardt, E
   Numerical modelling of three-dimension stress rotation ahead of an advancing tunnel face
   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
   
   E. Eberhardt, "Numerical modelling of three-dimension stress rotation ahead of an advancing tunnel face", INT J ROCK, 38(4), 2001, pp. 499-518
6. Pisanova, E; Zhandarov, S; Mader, E
   How can adhesion be determined from micromechanical tests?
   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
   
   E. Pisanova et al., "How can adhesion be determined from micromechanical tests?", COMPOS P A, 32(3-4), 2001, pp. 425-434
7. Cretegny, L; Saxena, A
   AFM characterization of the evolution of surface deformation during fatigue in polycrystalline copper
   ACTA MATERIALIA
   
   L. Cretegny e A. Saxena, "AFM characterization of the evolution of surface deformation during fatigue in polycrystalline copper", ACT MATER, 49(18), 2001, pp. 3755-3765
8. Zhang, ZF; Wang, ZG; Sun, ZM
   Evolution and microstructural characteristics of deformation bands in fatigued copper single crystals
   ACTA MATERIALIA
   
   Z.F. Zhang et al., "Evolution and microstructural characteristics of deformation bands in fatigued copper single crystals", ACT MATER, 49(15), 2001, pp. 2875-2886
9. Villechaise, P; Mineur, M; Mendez, J
   Analysis of texture effects on fatigue behaviour of 316L stainless steel
   JOURNAL DE PHYSIQUE IV
   
   P. Villechaise et al., "Analysis of texture effects on fatigue behaviour of 316L stainless steel", J PHYS IV, 11(PR4), 2001, pp. 311-319
10. Singh, A
    An experimental investigation of bending fatigue initiation and propagation lives
    JOURNAL OF MECHANICAL DESIGN
    
    A. Singh, "An experimental investigation of bending fatigue initiation and propagation lives", J MEC DESIG, 123(3), 2001, pp. 431-435
11. Zheng, XS; Jin, JZ; Li, Z
    Method of as-cast crack prediction within solidified layer
    PROGRESS IN NATURAL SCIENCE
    
    X.S. Zheng et al., "Method of as-cast crack prediction within solidified layer", PROG NAT SC, 11(2), 2001, pp. 123-128
12. Lu, YH; Qiao, LJ; Chu, WY
    In-situ study of martensitic transformation and nucleation, propagation ofcrack in CuNiAl shape memory alloy
    SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY
    
    Y.H. Lu et al., "In-situ study of martensitic transformation and nucleation, propagation ofcrack in CuNiAl shape memory alloy", SCI CHINA A, 44(7), 2001, pp. 932-939
13. Chabaud-Reytier, M; Allais, L; Poquillon, D; Caes-Hogrel, C; Mottot, M; Pineau, A
    Modelling creep damage in heat affected zone in 321 stainless steel. Part I: Quantitative study of intergranular damage
    MATERIALS AT HIGH TEMPERATURES
    
    M. Chabaud-Reytier et al., "Modelling creep damage in heat affected zone in 321 stainless steel. Part I: Quantitative study of intergranular damage", MATER HIGH, 18(2), 2001, pp. 71-80
14. Chow, CL; Yang, F; Fang, HE
    Damage mechanics characterization on the fatigue behaviour of a solder joint material
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    
    C.L. Chow et al., "Damage mechanics characterization on the fatigue behaviour of a solder joint material", P I MEC E C, 215(C8), 2001, pp. 883-892
15. Hidayetoglu, TK
    Effect of the gear finishing process on bending fatigue crack initiation and propagation in spur gears
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
    
    T.K. Hidayetoglu, "Effect of the gear finishing process on bending fatigue crack initiation and propagation in spur gears", P I MEC E C, 215(7), 2001, pp. 785-792
16. Grellmann, W; Reincke, K; Lach, R; Heinrich, G
    Characterization of crack toughness behaviour of unfilled and filled elastomers
    KAUTSCHUK GUMMI KUNSTSTOFFE
    
    W. Grellmann et al., "Characterization of crack toughness behaviour of unfilled and filled elastomers", KAUT GUM KU, 54(7-8), 2001, pp. 387-393
17. Leban, M; Legat, A; Dolecek, V
    Electrochemical noise during non-stationary corrosion processes
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    
    M. Leban et al., "Electrochemical noise during non-stationary corrosion processes", MATER CORRO, 52(6), 2001, pp. 418-425
18. Jiang, L; Brooks, CR; Liaw, PK; Klarstrom, DL; Rawn, CJ; Muenchen, B
    Phenomenological aspects of the high-cycle fatigue of ULTIMET (R) alloy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    L. Jiang et al., "Phenomenological aspects of the high-cycle fatigue of ULTIMET (R) alloy", MAT SCI E A, 316(1-2), 2001, pp. 66-79
19. Lukas, P; Kunz, L
    Cyclic slip localisation and fatigue crack initiation in fcc single crystals
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    P. Lukas e L. Kunz, "Cyclic slip localisation and fatigue crack initiation in fcc single crystals", MAT SCI E A, 314(1-2), 2001, pp. 75-80
20. Jiang, L; Brooks, CR; Liaw, PK; Wang, H; Rawn, CJ; Klarstrom, DL
    High-frequency metal fatigue: the high-cycle fatigue behavior of ULTIMET (R) alloy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    L. Jiang et al., "High-frequency metal fatigue: the high-cycle fatigue behavior of ULTIMET (R) alloy", MAT SCI E A, 314(1-2), 2001, pp. 162-175
21. Chu, RQ; Cai, Z; Li, SX; Wang, ZG
    Fatigue crack initiation and propagation in an alpha-iron polycrystal
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    R.Q. Chu et al., "Fatigue crack initiation and propagation in an alpha-iron polycrystal", MAT SCI E A, 313(1-2), 2001, pp. 64-68
22. Papakyriacou, M; Mayer, H; Pypen, C; Plenk, H; Stanzl-Tschegg, S
    Influence of loading frequency on high cycle fatigue properties of b.c.c. and h.c.p. metals
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    M. Papakyriacou et al., "Influence of loading frequency on high cycle fatigue properties of b.c.c. and h.c.p. metals", MAT SCI E A, 308(1-2), 2001, pp. 143-152
23. Nakajima, K; Urabe, T; Hosoya, Y; Kamishi, S; Miyata, T; Takeda, N
    Influence of microstructural morphology and prestraining on short fatigue crack propagation in dual-phase steels
    ISIJ INTERNATIONAL
    
    K. Nakajima et al., "Influence of microstructural morphology and prestraining on short fatigue crack propagation in dual-phase steels", ISIJ INT, 41(3), 2001, pp. 298-304
24. Ishikawa, N; Parks, DM; Kurihara, M
    Micromechanical modeling of ductile crack initiation behavior of two phasesteels
    ISIJ INTERNATIONAL
    
    N. Ishikawa et al., "Micromechanical modeling of ductile crack initiation behavior of two phasesteels", ISIJ INT, 41(1), 2001, pp. 76-85
25. Alves, M
    Measurement of ductile material damage
    MECHANICS OF STRUCTURES AND MACHINES
    
    M. Alves, "Measurement of ductile material damage", MECH STRUCT, 29(4), 2001, pp. 451-476
26. Giri, M; Bousfield, DB; Unertl, WN
    Dynamic contacts on viscoelastic films: Work of adhesion
    LANGMUIR
    
    M. Giri et al., "Dynamic contacts on viscoelastic films: Work of adhesion", LANGMUIR, 17(10), 2001, pp. 2973-2981
27. Podgornik, B; Kalin, M; Vizintin, J; Vodopivec, F
    Microstructural changes and contact temperatures during fretting in steel-steel contact
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
    
    B. Podgornik et al., "Microstructural changes and contact temperatures during fretting in steel-steel contact", J TRIBOL, 123(4), 2001, pp. 670-675
28. Filimonov, YL; Lavrov, AV; Shafarenko, YM; Shkuratnik, VL
    Memory effects in rock salt under triaxial stress state and their use for stress measurement in a rock mass
    ROCK MECHANICS AND ROCK ENGINEERING
    
    Y.L. Filimonov et al., "Memory effects in rock salt under triaxial stress state and their use for stress measurement in a rock mass", ROCK MECH R, 34(4), 2001, pp. 275-291
29. Allen, DH; Searcy, CR
    A micromechanical model for a viscoelastic cohesive zone
    INTERNATIONAL JOURNAL OF FRACTURE
    
    D.H. Allen e C.R. Searcy, "A micromechanical model for a viscoelastic cohesive zone", INT J FRACT, 107(2), 2001, pp. 159-176
30. Allen, DH; Searcy, CR
    A micromechanical model for a viscoelastic cohesive zone
    INTERNATIONAL JOURNAL OF FRACTURE
    
    D.H. Allen e C.R. Searcy, "A micromechanical model for a viscoelastic cohesive zone", INT J FRACT, 107(2), 2001, pp. 159-176
31. Kim, T; Chung, DDL
    Effect of stress on the electrical resistivity of solder
    JOURNAL OF ELECTRONIC MATERIALS
    
    T. Kim e D.D.L. Chung, "Effect of stress on the electrical resistivity of solder", J ELEC MAT, 30(10), 2001, pp. L29-L31
32. Li, YS; Kato, D; Shibata, K; Onizawa, K
    Improvements to a probabilistic fracture mechanics code for evaluating theintegrity of a RPV under transient loading
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    
    Y.S. Li et al., "Improvements to a probabilistic fracture mechanics code for evaluating theintegrity of a RPV under transient loading", INT J PRES, 78(4), 2001, pp. 271-282
33. Li, ZX; Chan, THT; Ko, JM
    Fatigue damage model for bridge under traffic loading: application made toTsing Ma Bridge
    THEORETICAL AND APPLIED FRACTURE MECHANICS
    
    Z.X. Li et al., "Fatigue damage model for bridge under traffic loading: application made toTsing Ma Bridge", THEOR A FR, 35(1), 2001, pp. 81-91
34. Leon, R; Weitsman, YJ
    Time-to-failure of randomly reinforced glass strand/urethane matrix composites: data, statistical analysis and theoretical prediction
    MECHANICS OF MATERIALS
    
    R. Leon e Y.J. Weitsman, "Time-to-failure of randomly reinforced glass strand/urethane matrix composites: data, statistical analysis and theoretical prediction", MECH MATER, 33(3), 2001, pp. 127-137
35. Giddings, VL; Kurtz, SM; Jewett, CW; Foulds, JR; Edidin, AA
    A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement
    BIOMATERIALS
    
    V.L. Giddings et al., "A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement", BIOMATERIAL, 22(13), 2001, pp. 1875-1881
36. Zheng, XL
    On some basic problems of fatigue research in engineering
    INTERNATIONAL JOURNAL OF FATIGUE
    
    X.L. Zheng, "On some basic problems of fatigue research in engineering", INT J FATIG, 23(9), 2001, pp. 751-766
37. Ye, DY; Wang, ZL
    A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cyclic plastic strain energy during fatigue
    INTERNATIONAL JOURNAL OF FATIGUE
    
    D.Y. Ye e Z.L. Wang, "A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cyclic plastic strain energy during fatigue", INT J FATIG, 23(8), 2001, pp. 679-687
38. Lykins, CD; Mall, S; Jain, VK
    Combined experimental-numerical investigation of fretting fatigue crack initiation
    INTERNATIONAL JOURNAL OF FATIGUE
    
    C.D. Lykins et al., "Combined experimental-numerical investigation of fretting fatigue crack initiation", INT J FATIG, 23(8), 2001, pp. 703-711
39. Ringsberg, JW
    Life prediction of rolling contact fatigue crack initiation
    INTERNATIONAL JOURNAL OF FATIGUE
    
    J.W. Ringsberg, "Life prediction of rolling contact fatigue crack initiation", INT J FATIG, 23(7), 2001, pp. 575-586
40. Yan, JH; Zheng, XL; Zhao, K
    Experimental investigation on the small-load-omitting criterion
    INTERNATIONAL JOURNAL OF FATIGUE
    
    J.H. Yan et al., "Experimental investigation on the small-load-omitting criterion", INT J FATIG, 23(5), 2001, pp. 403-415
41. Sun, ZD; Bathias, C; Baudry, G
    Fretting fatigue of 42CrMo4 steel at ultrasonic frequency
    INTERNATIONAL JOURNAL OF FATIGUE
    
    Z.D. Sun et al., "Fretting fatigue of 42CrMo4 steel at ultrasonic frequency", INT J FATIG, 23(5), 2001, pp. 449-453
42. Wu, ZX
    Short fatigue crack parameters describing the lifetime of unnotched steel specimens
    INTERNATIONAL JOURNAL OF FATIGUE
    
    Z.X. Wu, "Short fatigue crack parameters describing the lifetime of unnotched steel specimens", INT J FATIG, 23(4), 2001, pp. 363-369
43. Sonsino, CM
    Influence of load and deformation-controlled multiaxial tests on fatigue life to crack initiation
    INTERNATIONAL JOURNAL OF FATIGUE
    
    C.M. Sonsino, "Influence of load and deformation-controlled multiaxial tests on fatigue life to crack initiation", INT J FATIG, 23(2), 2001, pp. 159-167
44. Ye, DY; Wang, ZL
    An approach to investigate pre-nucleation fatigue damage of cyclically loaded metals using Vickers microhardness tests
    INTERNATIONAL JOURNAL OF FATIGUE
    
    D.Y. Ye e Z.L. Wang, "An approach to investigate pre-nucleation fatigue damage of cyclically loaded metals using Vickers microhardness tests", INT J FATIG, 23(1), 2001, pp. 85-91
45. Yamashita, M; Tada, S; Sato, Y; Shoji, T
    Nondestructive evaluation of fatigue and creep-fatigue damage in 12%Cr stainless steel by the induced current focusing potential drop technique
    JOURNAL OF TESTING AND EVALUATION
    
    M. Yamashita et al., "Nondestructive evaluation of fatigue and creep-fatigue damage in 12%Cr stainless steel by the induced current focusing potential drop technique", J TEST EVAL, 29(6), 2001, pp. 544-555
46. Todinov, MT
    Probability distribution of fatigue life controlled by defects
    COMPUTERS & STRUCTURES
    
    M.T. Todinov, "Probability distribution of fatigue life controlled by defects", COMPUT STRU, 79(3), 2001, pp. 313-318
47. El-Magd, E; Brodmann, M
    Influence of strain rate and temperature on the failure criterion of aluminium AA7075
    ZEITSCHRIFT FUR METALLKUNDE
    
    E. El-Magd e M. Brodmann, "Influence of strain rate and temperature on the failure criterion of aluminium AA7075", Z METALLKUN, 92(1), 2001, pp. 62-69
48. Choi, J; Tamma, KK
    Woven fabric composites - part II: Characterization of macro-crack initiation loads for global damage analysis
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
    
    J. Choi e K.K. Tamma, "Woven fabric composites - part II: Characterization of macro-crack initiation loads for global damage analysis", INT J NUM M, 50(10), 2001, pp. 2299-2315
49. Polak, J; Man, J; Obrtlik, K
    Fatigue damage in aluminum-lithium alloys - Part II. Initiation and short crack growth
    KOVOVE MATERIALY-METALLIC MATERIALS
    
    J. Polak et al., "Fatigue damage in aluminum-lithium alloys - Part II. Initiation and short crack growth", KOVOVE MAT, 39(3), 2001, pp. 179-189
50. Zhang, C; Leng, Y; Chen, JY
    In vitro mechanical integrity of hydroxyapatite coatings on Ti-6Al-4V implants under shear loading
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    C. Zhang et al., "In vitro mechanical integrity of hydroxyapatite coatings on Ti-6Al-4V implants under shear loading", J BIOMED MR, 56(3), 2001, pp. 342-350
51. Haruna, T; Onishi, K; Shibata, T
    Effect of intensity of ultra-violet light on inhibition of stress corrosion cracking for sensitized SUS304 stainless steel
    JOURNAL OF THE JAPAN INSTITUTE OF METALS
    
    T. Haruna et al., "Effect of intensity of ultra-violet light on inhibition of stress corrosion cracking for sensitized SUS304 stainless steel", J JPN METAL, 65(2), 2001, pp. 128-133
52. Li, QM
    Strain energy density failure criterion
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
    
    Q.M. Li, "Strain energy density failure criterion", INT J SOL S, 38(38-39), 2001, pp. 6997-7013
53. Yang, B; Mall, S; Ravi-Chandar, K
    A cohesive zone model for fatigue crack growth in quasibrittle materials
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
    
    B. Yang et al., "A cohesive zone model for fatigue crack growth in quasibrittle materials", INT J SOL S, 38(22-23), 2001, pp. 3927-3944
54. Ciavarella, M; Demelio, G
    A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
    
    M. Ciavarella e G. Demelio, "A review of analytical aspects of fretting fatigue, with extension to damage parameters, and application to dovetail joints", INT J SOL S, 38(10-13), 2001, pp. 1791-1811
55. Tschegg, EK; Fruhmann, K; Stanzl-Tschegg, SE
    Damage and fracture mechanisms during mode I and III loading of wood
    HOLZFORSCHUNG
    
    E.K. Tschegg et al., "Damage and fracture mechanisms during mode I and III loading of wood", HOLZFORSCH, 55(5), 2001, pp. 525-533
56. Suter, T; Webb, EG; Bohni, H; Alkire, RC
    Pit initiation on stainless steels in 1 M NaCl with and without mechanicalstress
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    
    T. Suter et al., "Pit initiation on stainless steels in 1 M NaCl with and without mechanicalstress", J ELCHEM SO, 148(5), 2001, pp. B174-B185
57. Shibata, K; Kato, D; Li, YS
    Development of RPV reliability analysis code based on probabilistic fracture mechanics methodology
    JOURNAL OF THE ATOMIC ENERGY SOCIETY OF JAPAN
    
    K. Shibata et al., "Development of RPV reliability analysis code based on probabilistic fracture mechanics methodology", J ATOM E S, 43(4), 2001, pp. 387-396
58. Wang, QY; Pidaparti, RM; Palakal, MJ
    Comparative study of corrosion-fatigue in aircraft materials
    AIAA JOURNAL
    
    Q.Y. Wang et al., "Comparative study of corrosion-fatigue in aircraft materials", AIAA J, 39(2), 2001, pp. 325-330
59. Tokaji, K; Ohya, K; Kariya, H
    Subsurface fatigue crack initiation in beta titanium alloys
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    
    K. Tokaji et al., "Subsurface fatigue crack initiation in beta titanium alloys", FATIG FRACT, 23(9), 2000, pp. 759-766
60. Giannakopoulos, AE; Lindley, TC; Suresh, S; Chenut, C
    Similarities of stress concentrations in contact at round punches and fatigue at notches: implications to fretting fatigue crack initiation
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    
    A.E. Giannakopoulos et al., "Similarities of stress concentrations in contact at round punches and fatigue at notches: implications to fretting fatigue crack initiation", FATIG FRACT, 23(7), 2000, pp. 561-571
61. Ihara, C; Tanaka, T
    A stochastic damage accumulation model for crack initiation in high-cycle fatigue
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    
    C. Ihara e T. Tanaka, "A stochastic damage accumulation model for crack initiation in high-cycle fatigue", FATIG FRACT, 23(5), 2000, pp. 375-380
62. Zhang, B; Chen, W; Poirier, DR
    Effect of solidification cooling rate on the fatigue life of A356.2-T6 cast aluminium alloy
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    
    B. Zhang et al., "Effect of solidification cooling rate on the fatigue life of A356.2-T6 cast aluminium alloy", FATIG FRACT, 23(5), 2000, pp. 417-423
63. Ghfiri, R; Amrouche, A; Imad, A; Mesmacque, G
    Fatigue life estimation after crack repair in 6005 A-T6 aluminium alloy using the cold expansion hole technique
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    
    R. Ghfiri et al., "Fatigue life estimation after crack repair in 6005 A-T6 aluminium alloy using the cold expansion hole technique", FATIG FRACT, 23(11), 2000, pp. 911-916
64. Stoudt, MR; Cammarata, RC; Ricker, RE
    Suppression of fatigue cracking with nanometer-scale multilayered coatings
    SCRIPTA MATERIALIA
    
    M.R. Stoudt et al., "Suppression of fatigue cracking with nanometer-scale multilayered coatings", SCR MATER, 43(6), 2000, pp. 491-496
65. Pao, PS; Gill, SJ; Feng, CR
    On fatigue crack initiation from corrosion pits in 7075-T7351 aluminum alloy
    SCRIPTA MATERIALIA
    
    P.S. Pao et al., "On fatigue crack initiation from corrosion pits in 7075-T7351 aluminum alloy", SCR MATER, 43(5), 2000, pp. 391-396
66. Fine, ME
    Phase transformation theory applied to elevated temperature fatigue
    SCRIPTA MATERIALIA
    
    M.E. Fine, "Phase transformation theory applied to elevated temperature fatigue", SCR MATER, 42(10), 2000, pp. 1007-1012
67. Liu, YM; Mitchell, TE; Wadley, HNG
    Anisotropic damage evolution in a 0 degrees/90 degrees laminated ceramic-matrix composite
    ACTA MATERIALIA
    
    Y.M. Liu et al., "Anisotropic damage evolution in a 0 degrees/90 degrees laminated ceramic-matrix composite", ACT MATER, 48(20), 2000, pp. 4841-4849
68. Gao, N; Dwyer-Joyce, RS
    The effects of surface defects on the fatigue of water- and oil-lubricatedcontacts
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
    
    N. Gao e R.S. Dwyer-Joyce, "The effects of surface defects on the fatigue of water- and oil-lubricatedcontacts", P I MEC E J, 214(J6), 2000, pp. 611-626
69. Kataoka, Y; Taya, M
    Analysis of mechanical behavior of a short fiber composite using micromechanics based model - (Effects of fiber clustering on composite stiffness andcrack initiation)
    JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    
    Y. Kataoka e M. Taya, "Analysis of mechanical behavior of a short fiber composite using micromechanics based model - (Effects of fiber clustering on composite stiffness andcrack initiation)", JSME A, 43(1), 2000, pp. 46-52
70. Koh, SK
    Elastic-plastic stress analysis and fatigue lifetime prediction of cross-bores in autofrettaged pressure vessels
    KSME INTERNATIONAL JOURNAL
    
    S.K. Koh, "Elastic-plastic stress analysis and fatigue lifetime prediction of cross-bores in autofrettaged pressure vessels", KSME INT J, 14(9), 2000, pp. 935-946
71. Sabatier, L; Villechaise, P; Girard, JC
    Electron backscattered diffraction and atomic force microscopy analysis ofslip bands induced by fatigue in 316L austenitic stainless steel
    JOURNAL DE PHYSIQUE IV
    
    L. Sabatier et al., "Electron backscattered diffraction and atomic force microscopy analysis ofslip bands induced by fatigue in 316L austenitic stainless steel", J PHYS IV, 10(P6), 2000, pp. 197-203
72. Chawla, N; Andres, C; Davis, LC; Jones, JW; Allison, JE
    The interactive role of inclusions and SiC reinforcement on the high-cyclefatigue resistance of particle reinforced metal matrix composites
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    N. Chawla et al., "The interactive role of inclusions and SiC reinforcement on the high-cyclefatigue resistance of particle reinforced metal matrix composites", MET MAT T A, 31(3A), 2000, pp. 951-957
73. Chawla, N; Habel, U; Shen, YL; Andres, C; Jones, JW; Allison, JE
    The effect of matrix microstructure on the tensile and fatigue behavior ofSiC particle-reinforced 2080 Al matrix composites
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    N. Chawla et al., "The effect of matrix microstructure on the tensile and fatigue behavior ofSiC particle-reinforced 2080 Al matrix composites", MET MAT T A, 31(2), 2000, pp. 531-540
74. Straffelini, G; Puscas, TM; Molinari, A
    Identification of rolling-sliding damage mechanisms in porous alloys
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    G. Straffelini et al., "Identification of rolling-sliding damage mechanisms in porous alloys", MET MAT T A, 31(12), 2000, pp. 3091-3099
75. Caton, MJ; Jones, JW; Allison, JE
    Use of small fatigue crack growth analysis in predicting the S-N response of cast aluminum alloys
    FATIGUE CRACK GROWTH THRESHOLDS, ENDURANCE LIMITS, AND DESIGN
    
    M.J. Caton et al., "Use of small fatigue crack growth analysis in predicting the S-N response of cast aluminum alloys", AM SOC TEST, 1372, 2000, pp. 285-303
76. Dhua, SK; Ray, A; Sen, SK; Prasad, MS; Mishra, KB; Jha, S
    Influence of nonmetallic inclusion characteristics on the mechanical properties of rail steel
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    S.K. Dhua et al., "Influence of nonmetallic inclusion characteristics on the mechanical properties of rail steel", J MAT ENG P, 9(6), 2000, pp. 700-709
77. Nazeer, MM; Khan, MA; Naeem, A; Haq, AU
    Response of ductile metal sheet parameters to the cone angle of indenting conical tool and fracture toughness evaluation
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    M.M. Nazeer et al., "Response of ductile metal sheet parameters to the cone angle of indenting conical tool and fracture toughness evaluation", J MAT ENG P, 9(5), 2000, pp. 489-498
78. Giri, M; Bousfield, D; Unertl, WN
    Stress intensity in viscoelastic contacts
    TRIBOLOGY LETTERS
    
    M. Giri et al., "Stress intensity in viscoelastic contacts", TRIBOL LETT, 9(1-2), 2000, pp. 33-39
79. Lemaitre, J; Desmorat, R; Sauzay, M
    Anisotropic damage law of evolution
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
    
    J. Lemaitre et al., "Anisotropic damage law of evolution", EUR J MEC A, 19(2), 2000, pp. 187-208
80. Ringsberg, JW; Bjarnehed, H; Johansson, A; Josefson, BL
    Rolling contact fatigue of rails - finite element modelling of residual stresses, strains and crack initiation
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT
    
    J.W. Ringsberg et al., "Rolling contact fatigue of rails - finite element modelling of residual stresses, strains and crack initiation", P I MEC E F, 214(1), 2000, pp. 7-19
81. Chauvot, C; Sester, M
    Fatigue crack initiation and crystallographic crack growth in an austenitic stainless steel
    COMPUTATIONAL MATERIALS SCIENCE
    
    C. Chauvot e M. Sester, "Fatigue crack initiation and crystallographic crack growth in an austenitic stainless steel", COMP MAT SC, 19(1-4), 2000, pp. 87-96
82. Zheng, M; Lauschke, U; Kuna, M
    A damage mechanics based approach for fracture of metallic components
    COMPUTATIONAL MATERIALS SCIENCE
    
    M. Zheng et al., "A damage mechanics based approach for fracture of metallic components", COMP MAT SC, 19(1-4), 2000, pp. 170-178
83. Hung, NP; Lim, CS; Ho, YK; Tan, YC; Tan, WG
    Cumulative creep and hot isostatic pressing of particle-reinforced metal matrix composites
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    N.P. Hung et al., "Cumulative creep and hot isostatic pressing of particle-reinforced metal matrix composites", J MATER PR, 101(1-3), 2000, pp. 104-109
84. Huang, HL; Ho, NJ
    The study of fatigue in polycrystalline copper under various strain amplitude at stage I: crack initiation and propagation
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    H.L. Huang e N.J. Ho, "The study of fatigue in polycrystalline copper under various strain amplitude at stage I: crack initiation and propagation", MAT SCI E A, 293(1-2), 2000, pp. 7-14
85. Huang, HL; Ho, NJ
    The microstructure of the fatigue crack tip in Fe-Al-Mn-0.4% C alloy near the stress intensity threshold
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    H.L. Huang e N.J. Ho, "The microstructure of the fatigue crack tip in Fe-Al-Mn-0.4% C alloy near the stress intensity threshold", MAT SCI E A, 293(1-2), 2000, pp. 235-241
86. Genel, K; Demirkol, M; Gulmez, T
    Corrosion fatigue behaviour of ion nitrided AISI 4140 steel
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    K. Genel et al., "Corrosion fatigue behaviour of ion nitrided AISI 4140 steel", MAT SCI E A, 288(1), 2000, pp. 91-100
87. Smida, T; Bosansky, J
    Deformation twinning and its possible influence on the ductile brittle transition temperature of ferritic steels
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    T. Smida e J. Bosansky, "Deformation twinning and its possible influence on the ductile brittle transition temperature of ferritic steels", MAT SCI E A, 287(1), 2000, pp. 107-115
88. Mineur, M; Villechaise, P; Mendez, J
    Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    M. Mineur et al., "Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel", MAT SCI E A, 286(2), 2000, pp. 257-268
89. Almer, JD; Cohen, JB; Moran, B
    The effects of residual macrostresses and microstresses on fatigue crack initiation
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    J.D. Almer et al., "The effects of residual macrostresses and microstresses on fatigue crack initiation", MAT SCI E A, 284(1-2), 2000, pp. 268-279
90. Tokaji, K; Kariya, H
    Mean stress dependence of fatigue strength and subsurface crack initiationin Ti-15Mo-5Zr-3Al alloy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    K. Tokaji e H. Kariya, "Mean stress dependence of fatigue strength and subsurface crack initiationin Ti-15Mo-5Zr-3Al alloy", MAT SCI E A, 281(1-2), 2000, pp. 268-274
91. Hu, YM; Floer, W; Krupp, U; Christ, HJ
    Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    Y.M. Hu et al., "Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al", MAT SCI E A, 278(1-2), 2000, pp. 170-180
92. Ishikawa, N; Parks, DM; Kurihara, M
    Micromechanism of ductile crack initiation in structural steels based on void nucleation and growth
    ISIJ INTERNATIONAL
    
    N. Ishikawa et al., "Micromechanism of ductile crack initiation in structural steels based on void nucleation and growth", ISIJ INT, 40(5), 2000, pp. 519-527
93. Lammer, H; Tsakmakis, C
    Discussion of coupled elastoplasticity and damage constitutive equations for small and finite deformations
    INTERNATIONAL JOURNAL OF PLASTICITY
    
    H. Lammer e C. Tsakmakis, "Discussion of coupled elastoplasticity and damage constitutive equations for small and finite deformations", INT J PLAST, 16(5), 2000, pp. 495-523
94. Allen, DH; Searcy, CR
    Numerical aspects of a micromechanical model of a cohesive zone
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
    
    D.H. Allen e C.R. Searcy, "Numerical aspects of a micromechanical model of a cohesive zone", J REINF PL, 19(3), 2000, pp. 240-248
95. Liao, K; Reifsnider, KL
    A tensile strength model for unidirectional fiber-reinforced brittle matrix composite
    INTERNATIONAL JOURNAL OF FRACTURE
    
    K. Liao e K.L. Reifsnider, "A tensile strength model for unidirectional fiber-reinforced brittle matrix composite", INT J FRACT, 106(2), 2000, pp. 95-115
96. Wang, GS
    Analysing the onset of multiple site damage at mechanical joints
    INTERNATIONAL JOURNAL OF FRACTURE
    
    G.S. Wang, "Analysing the onset of multiple site damage at mechanical joints", INT J FRACT, 105(3), 2000, pp. 209-241
97. Dhar, S; Dixit, PM; Sethuraman, R
    A continuum damage mechanics model for ductile fracture
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    
    S. Dhar et al., "A continuum damage mechanics model for ductile fracture", INT J PRES, 77(6), 2000, pp. 335-344
98. Chawla, DS; Bhate, SR; Kushwaha, HS
    Numerical simulation of crack growth and arrest in a vessel under pressurethermal shock
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    
    D.S. Chawla et al., "Numerical simulation of crack growth and arrest in a vessel under pressurethermal shock", INT J PRES, 77(5), 2000, pp. 261-271
99. Timofeev, BT; Blumin, AA; Anikovsky, VV
    Fracture toughness of 10GN2MFA steel and its welds
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    
    B.T. Timofeev et al., "Fracture toughness of 10GN2MFA steel and its welds", INT J PRES, 77(4), 2000, pp. 195-201
100. Chen, CR; Lei, JF; Li, SX; Wen, JL
     Effects of soft hemispherical particle on local surface stress of hard matrix
     MATERIALS SCIENCE AND TECHNOLOGY
     
     C.R. Chen et al., "Effects of soft hemispherical particle on local surface stress of hard matrix", MATER SCI T, 16(4), 2000, pp. 463-468