Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Braunovic, M
   Overheating of flexible tinned copper connectors
   IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
   
   M. Braunovic, "Overheating of flexible tinned copper connectors", IEEE T COMP, 24(3), 2001, pp. 384-388
2. Subyakto, B; Hata, T; Ide, I; Kawai, S
   Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting
   JOURNAL OF WOOD SCIENCE
   
   B. Subyakto et al., "Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting", J WOOD SCI, 47(3), 2001, pp. 199-207
3. Park, SJ; Lazarides, AA; Mirkin, CA; Letsinger, RL
   Directed assembly of periodic materials from protein and oligonucleotide-modified nanoparticle building blocks
   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
   
   S.J. Park et al., "Directed assembly of periodic materials from protein and oligonucleotide-modified nanoparticle building blocks", ANGEW CHEM, 40(15), 2001, pp. 2909-2912
4. Sjogren, BA
   Static strength of CFRP laminates with embedded fiber-optic edge connectors
   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
   
   B.A. Sjogren, "Static strength of CFRP laminates with embedded fiber-optic edge connectors", COMPOS P A, 32(2), 2001, pp. 189-196
5. Park, WB; Owen, HL; Zegura, EW
   Intact versus fractional switching in SONET/SDH cross-connects
   EUROPEAN TRANSACTIONS ON TELECOMMUNICATIONS
   
   W.B. Park et al., "Intact versus fractional switching in SONET/SDH cross-connects", EUR T TELEC, 12(1), 2001, pp. 37-54
6. Wegmuller, M; Golowich, S; Giaretta, G; Nuss, M
   Evolution of the beam diameter in a multimode fiber link through offset connectors
   IEEE PHOTONICS TECHNOLOGY LETTERS
   
   M. Wegmuller et al., "Evolution of the beam diameter in a multimode fiber link through offset connectors", IEEE PHOTON, 13(6), 2001, pp. 574-576
7. Shuto, Y; Yanagi, S; Ohno, M; Sato, H; Amano, M; Iwano, S; Sumida, S; Tohno, S
   Plastic split alignment sleeves for single-mode fiber connection of MU- and SC-type ferrules
   IEEE PHOTONICS TECHNOLOGY LETTERS
   
   Y. Shuto et al., "Plastic split alignment sleeves for single-mode fiber connection of MU- and SC-type ferrules", IEEE PHOTON, 13(3), 2001, pp. 218-220
8. Delseny, M; Salses, J; Cooke, R; Sallaud, C; Regad, F; Lagoda, P; Guiderdoni, E; Ventelon, M; Brugidou, C; Ghesquiere, A
   Rice genomics: Present and future
   PLANT PHYSIOLOGY AND BIOCHEMISTRY
   
   M. Delseny et al., "Rice genomics: Present and future", PL PHYS BIO, 39(3-4), 2001, pp. 323-334
9. de Labachelerie, M; Kaou, N; Armbruster, V; Jeannot, JC; Mollier, P; Porte, H; Devoldere, N
   A micromachined connector for the coupling of optical waveguides and ribbon optical fibers
   SENSORS AND ACTUATORS A-PHYSICAL
   
   M. de Labachelerie et al., "A micromachined connector for the coupling of optical waveguides and ribbon optical fibers", SENS ACTU-A, 89(1-2), 2001, pp. 36-42
10. Burnet, MJ; Oehlers, DJ
    Fracture of mechanical shear connectors in composite beams
    MECHANICS OF STRUCTURES AND MACHINES
    
    M.J. Burnet e D.J. Oehlers, "Fracture of mechanical shear connectors in composite beams", MECH STRUCT, 29(1), 2001, pp. 1-41
11. Ju, SH; Rowlands, RE
    A three-dimensional frictional stress analysis of double-shear bolted woodjoints
    WOOD AND FIBER SCIENCE
    
    S.H. Ju e R.E. Rowlands, "A three-dimensional frictional stress analysis of double-shear bolted woodjoints", WOOD FIB SC, 33(4), 2001, pp. 550-563
12. Bahai, H
    A parametric model for axial and bending stress concentration factors in API drillstring threaded connectors
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING
    
    H. Bahai, "A parametric model for axial and bending stress concentration factors in API drillstring threaded connectors", INT J PRES, 78(7), 2001, pp. 495-505
13. Markazi, FD; Beale, RG; Godley, MHR
    Numerical modelling of semi-rigid boltless connectors
    COMPUTERS & STRUCTURES
    
    F.D. Markazi et al., "Numerical modelling of semi-rigid boltless connectors", COMPUT STRU, 79(26-28), 2001, pp. 2391-2402
14. Tristani, L; Zindine, EM; Boyer, L; Klimek, G
    Mechanical modeling of fretting cycles in electrical contacts
    WEAR
    
    L. Tristani et al., "Mechanical modeling of fretting cycles in electrical contacts", WEAR, 249(1-2), 2001, pp. 12-19
15. Nguyen, NT; Oehlers, DJ; Bradford, MA
    An analytical model for reinforced concrete beams with bolted side plates accounting for longitudinal and transverse partial interaction
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
    
    N.T. Nguyen et al., "An analytical model for reinforced concrete beams with bolted side plates accounting for longitudinal and transverse partial interaction", INT J SOL S, 38(38-39), 2001, pp. 6985-6996
16. Filipski, PS; Clark, RF; Paulusse, DC
    Calibration of HF thermal voltage converters using an asymmetrical Tee
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
    
    P.S. Filipski et al., "Calibration of HF thermal voltage converters using an asymmetrical Tee", IEEE INSTR, 50(2), 2001, pp. 345-348
17. Masterson, KD; Novotny, DR; Koepke, GH
    Electromagnetic shielding characteristics of optical-fiber feedthroughs
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY
    
    K.D. Masterson et al., "Electromagnetic shielding characteristics of optical-fiber feedthroughs", IEEE ELMAGN, 43(2), 2001, pp. 177-186
18. Lance, MJ; Vogel, EM; Reith, LA; Cannon, WR
    Low-temperature aging of zirconia ferrules for optical connectors
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY
    
    M.J. Lance et al., "Low-temperature aging of zirconia ferrules for optical connectors", J AM CERAM, 84(11), 2001, pp. 2731-2733
19. Callen, BW; Johnson, B; King, P; Timsit, RS; Abbott, WH
    Environmental degradation of utility power connectors in a harsh environment
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    
    B.W. Callen et al., "Environmental degradation of utility power connectors in a harsh environment", IEEE T COMP, 23(2), 2000, pp. 261-270
20. Hammam, T
    The impact of sliding motion and current load on the deterioration of tin-coated contact terminals
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    
    T. Hammam, "The impact of sliding motion and current load on the deterioration of tin-coated contact terminals", IEEE T COMP, 23(2), 2000, pp. 278-285
21. Swingler, J; McBride, JW; Maul, C
    Degradation of road tested automotive connectors
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    
    J. Swingler et al., "Degradation of road tested automotive connectors", IEEE T COMP, 23(1), 2000, pp. 157-164
22. Trewhella, JM; DeCusatis, CM; Fox, J
    Performance comparison of small form factor fiber optic connectors
    IEEE TRANSACTIONS ON ADVANCED PACKAGING
    
    J.M. Trewhella et al., "Performance comparison of small form factor fiber optic connectors", IEEE T AD P, 23(2), 2000, pp. 188-196
23. Hussein, R
    Analysis and design of metal-plate-connected joints subjected to buckling loads
    STRUCTURAL ENGINEERING AND MECHANICS
    
    R. Hussein, "Analysis and design of metal-plate-connected joints subjected to buckling loads", STRUC ENG M, 9(5), 2000, pp. 417-432
24. Khoe, GD
    Lightwave technology: Expectations, problems, and achievements
    IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS
    
    G.D. Khoe, "Lightwave technology: Expectations, problems, and achievements", IEEE S T QU, 6(6), 2000, pp. 1265-1272
25. Hussein, R
    Parametric investigation of the buckling performance of metal-plate-connected joints
    ADVANCES IN ENGINEERING SOFTWARE
    
    R. Hussein, "Parametric investigation of the buckling performance of metal-plate-connected joints", ADV EN SOFT, 31(1), 2000, pp. 45-56
26. Vianco, PT; Kilgo, AC
    The impact of process parameters on gold elimination from soldered connector assemblies
    SOLDERING & SURFACE MOUNT TECHNOLOGY
    
    P.T. Vianco e A.C. Kilgo, "The impact of process parameters on gold elimination from soldered connector assemblies", SOLDER S MT, 12(2), 2000, pp. 24-30
27. Bangura, JF; Demerdash, NA
    Effects of broken bars/end-ring connectors and airgap eccentricities on ohmic and core losses of induction motors in ASD's using a coupled finite element-state space method
    IEEE TRANSACTIONS ON ENERGY CONVERSION
    
    J.F. Bangura e N.A. Demerdash, "Effects of broken bars/end-ring connectors and airgap eccentricities on ohmic and core losses of induction motors in ASD's using a coupled finite element-state space method", IEEE EN CON, 15(1), 2000, pp. 40-47
28. Bangura, JF; Demerdash, NA
    Comparison between characterization and diagnosis of broken bars/end-ring connectors and airgap eccentricities of induction motors in ASD's using a coupled finite element-state space method
    IEEE TRANSACTIONS ON ENERGY CONVERSION
    
    J.F. Bangura e N.A. Demerdash, "Comparison between characterization and diagnosis of broken bars/end-ring connectors and airgap eccentricities of induction motors in ASD's using a coupled finite element-state space method", IEEE EN CON, 15(1), 2000, pp. 48-56
29. Johnson, RP
    Resistance of stud shear connectors to fatigue
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
    
    R.P. Johnson, "Resistance of stud shear connectors to fatigue", J CONSTR ST, 56(2), 2000, pp. 101-116
30. Takaya, M; Nagasawa, S; Murakami, Y
    Single-mode multifiber connector using an injection molded MT type ferruleand a quick assembly technique
    OPTICAL ENGINEERING
    
    M. Takaya et al., "Single-mode multifiber connector using an injection molded MT type ferruleand a quick assembly technique", OPT ENG, 39(4), 2000, pp. 1025-1031
31. Batsanov, AS; Fox, MA; Howard, JAK; MacBride, JAH; Wade, K
    Synthesis and structure of 1,12-diethynyl-para-carborane
    JOURNAL OF ORGANOMETALLIC CHEMISTRY
    
    A.S. Batsanov et al., "Synthesis and structure of 1,12-diethynyl-para-carborane", J ORGMET CH, 610(1-2), 2000, pp. 20-24
32. Martens, L; Madou, A; Kone, L; Demoulin, B; Sjoberg, P; Anton, A; Van Koetsem, J; Hoffmann, H; Schricker, U
    Comparison of test methods for the characterization of shielding of board-to-backplane and board-to-cable connectors
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY
    
    L. Martens et al., "Comparison of test methods for the characterization of shielding of board-to-backplane and board-to-cable connectors", IEEE ELMAGN, 42(4), 2000, pp. 427-440
33. Djurovic, B; Puzzo, CA; Spelt, JK
    Analysis of thermal warpage in a PCB with an array of PTH connectors
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
    
    B. Djurovic et al., "Analysis of thermal warpage in a PCB with an array of PTH connectors", IEEE T COMP, 22(3), 1999, pp. 414-420
34. Antler, M
    Contact fretting of electronic connectors
    IEICE TRANSACTIONS ON ELECTRONICS
    
    M. Antler, "Contact fretting of electronic connectors", IEICE TR EL, E82C(1), 1999, pp. 3-12
35. Kurup, DG; Rydberg, A
    Dielectric connectors for multilayered RF integration
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS
    
    D.G. Kurup e A. Rydberg, "Dielectric connectors for multilayered RF integration", MICROW OPT, 23(4), 1999, pp. 230-233
36. Bangura, JF; Demerdash, NA
    Diagnosis and characterization of effects of broken bars and connectors idsquirrel-cage induction motors by a time-stepping coupled finite element-state space modeling approach
    IEEE TRANSACTIONS ON ENERGY CONVERSION
    
    J.F. Bangura e N.A. Demerdash, "Diagnosis and characterization of effects of broken bars and connectors idsquirrel-cage induction motors by a time-stepping coupled finite element-state space modeling approach", IEEE EN CON, 14(4), 1999, pp. 1167-1175
37. Bazant, ZP; Vitek, JL
    Compound size effect in composite beams with softening connectors. I: Energy approach
    JOURNAL OF ENGINEERING MECHANICS-ASCE
    
    Z.P. Bazant e J.L. Vitek, "Compound size effect in composite beams with softening connectors. I: Energy approach", J ENG MEC, 125(11), 1999, pp. 1308-1314
38. Sodhi, NS; Briffett, C; Kong, L; Yuen, B
    Bird use of linear areas of a tropical city: implications for park connector design and management
    LANDSCAPE AND URBAN PLANNING
    
    N.S. Sodhi et al., "Bird use of linear areas of a tropical city: implications for park connector design and management", LANDSC URB, 45(2-3), 1999, pp. 123-130
39. Gattesco, N
    Analytical modeling of nonlinear behavior of composite beams with deformable connection
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
    
    N. Gattesco, "Analytical modeling of nonlinear behavior of composite beams with deformable connection", J CONSTR ST, 52(2), 1999, pp. 195-218
40. Akin, T; Ziaie, B; Nikles, SA; Najafi, K
    A modular micromachined high-density connector system for biomedical applications
    IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING
    
    T. Akin et al., "A modular micromachined high-density connector system for biomedical applications", IEEE BIOMED, 46(4), 1999, pp. 471-480
41. de Voogt, WG
    Pacemaker leads: Performance and progress
    AMERICAN JOURNAL OF CARDIOLOGY
    
    W.G. de Voogt, "Pacemaker leads: Performance and progress", AM J CARD, 83(5B), 1999, pp. 187D-191D
42. PARK WB; OWEN HL; ZEGURA EW
    SONET SDH TRAFFIC GENERATION MODELS
    European transactions on telecommunications
    
    W.B. Park et al., "SONET SDH TRAFFIC GENERATION MODELS", European transactions on telecommunications, 9(1), 1998, pp. 3-13
43. DIESTEL H
    A SPICE MODEL FOR ANGLED MULTIPIN CONNECTORS
    INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING
    
    H. Diestel, "A SPICE MODEL FOR ANGLED MULTIPIN CONNECTORS", INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 8(1), 1998, pp. 27-32
44. KING WW; STEPHENSON DL
    MODULAR ADAPTERS FOR FIBER OPTICS
    IEEE transactions on components, packaging, and manufacturing technology. Part A
    
    W.W. King e D.L. Stephenson, "MODULAR ADAPTERS FOR FIBER OPTICS", IEEE transactions on components, packaging, and manufacturing technology. Part A, 21(1), 1998, pp. 186-191
45. BALZER B; CUNOW E
    SIEMENS SOLARS APPROACH ON PHOTOVOLTAIC ELECTRICITY - NEW MILESTONE -ONE MEGAWATT PHOTOVOLTAIC PLANT AT THE NEW-MUNICH-TRADE-FAIR-CENTER
    Renewable energy
    
    B. Balzer e E. Cunow, "SIEMENS SOLARS APPROACH ON PHOTOVOLTAIC ELECTRICITY - NEW MILESTONE -ONE MEGAWATT PHOTOVOLTAIC PLANT AT THE NEW-MUNICH-TRADE-FAIR-CENTER", Renewable energy, 15(1-4), 1998, pp. 506-511
46. SCHRODER W; SCHILLINGS A; MATZ G
    SELF-MADE Y-SPLITS FOR HYPHENATED CAPILLARY GAS-CHROMATOGRAPHY
    HRC. Journal of high resolution chromatography
    
    W. Schroder et al., "SELF-MADE Y-SPLITS FOR HYPHENATED CAPILLARY GAS-CHROMATOGRAPHY", HRC. Journal of high resolution chromatography, 21(2), 1998, pp. 125-127
47. NAGASE R; SUGITA E; IWANO S; KANAYAMA K; ANDO Y
    DESIGN FOR MU-TYPE SINGLE-MODE MINIATURE OPTICAL CONNECTOR
    IEICE transactions on electronics
    
    R. Nagase et al., "DESIGN FOR MU-TYPE SINGLE-MODE MINIATURE OPTICAL CONNECTOR", IEICE transactions on electronics, E81C(3), 1998, pp. 408-415
48. LEMIEUX K; SEXSMITH R; WEILER G
    BEHAVIOR OF EMBEDDED STEEL CONNECTORS IN CONCRETE TILT-UP PANELS
    ACI structural journal
    
    K. Lemieux et al., "BEHAVIOR OF EMBEDDED STEEL CONNECTORS IN CONCRETE TILT-UP PANELS", ACI structural journal, 95(4), 1998, pp. 400-411
49. KERSTENS JGM; BENNENK W; CAMP JW
    PRESTRESSING WITH CARBON COMPOSITE RODS - A NUMERICAL-METHOD FOR DEVELOPING REUSABLE PRESTRESSING SYSTEMS
    ACI structural journal
    
    J.G.M. Kerstens et al., "PRESTRESSING WITH CARBON COMPOSITE RODS - A NUMERICAL-METHOD FOR DEVELOPING REUSABLE PRESTRESSING SYSTEMS", ACI structural journal, 95(1), 1998, pp. 43-50
50. KAI CC; HOWE CT; HOE EK
    INTEGRATING RAPID PROTOTYPING AND TOOLING WITH VACUUM CASTING FOR CONNECTORS
    International journal, advanced manufacturing technology
    
    C.C. Kai et al., "INTEGRATING RAPID PROTOTYPING AND TOOLING WITH VACUUM CASTING FOR CONNECTORS", International journal, advanced manufacturing technology, 14(9), 1998, pp. 617-623
51. WERMELINGER M; FIADEIRO JL
    CONNECTORS FOR MOBILE PROGRAMS
    IEEE transactions on software engineering
    
    M. Wermelinger e J.L. Fiadeiro, "CONNECTORS FOR MOBILE PROGRAMS", IEEE transactions on software engineering, 24(5), 1998, pp. 331-341
52. Selli, RK; Berglund, S
    Novel V-groove-based interconnect technology
    OPTICAL ENGINEERING
    
    R.K. Selli e S. Berglund, "Novel V-groove-based interconnect technology", OPT ENG, 37(12), 1998, pp. 3134-3142
53. ROSOWSKY DV; REED TD; TYNER KG
    ESTABLISHING UPLIFT DESIGN VALUES FOR METAL CONNECTORS IN LIGHT-FRAMECONSTRUCTION
    Journal of testing and evaluation
    
    D.V. Rosowsky et al., "ESTABLISHING UPLIFT DESIGN VALUES FOR METAL CONNECTORS IN LIGHT-FRAMECONSTRUCTION", Journal of testing and evaluation, 26(5), 1998, pp. 426-433
54. ANTLER M
    SLIDING WEAR AND FRICTION OF ELECTROPLATED AND CLAD CONNECTOR CONTACTMATERIALS - EFFECT OF SURFACE-ROUGHNESS
    Wear
    
    M. Antler, "SLIDING WEAR AND FRICTION OF ELECTROPLATED AND CLAD CONNECTOR CONTACTMATERIALS - EFFECT OF SURFACE-ROUGHNESS", Wear, 214(1), 1998, pp. 1-9
55. HIKITA M; YOSHIMURA R; USUI M; TOMARU S; IMAMURA S
    POLYMERIC OPTICAL WAVE-GUIDES FOR OPTICAL INTERCONNECTIONS
    Thin solid films
    
    M. Hikita et al., "POLYMERIC OPTICAL WAVE-GUIDES FOR OPTICAL INTERCONNECTIONS", Thin solid films, 331(1-2), 1998, pp. 303-308
56. Evans, RA
    Electronics reliability: A personal view
    IEEE TRANSACTIONS ON RELIABILITY
    
    R.A. Evans, "Electronics reliability: A personal view", IEEE RELIAB, 47(3), 1998, pp. 329-332
57. VANHORCK FBM; VANDEURSEN APJ; VANDERLAAN PCT; BRUINS PR; PAAGMANS BLF
    A RAPID METHOD FOR MEASURING THE TRANSFER IMPEDANCE OF CONNECTORS
    IEEE transactions on electromagnetic compatibility
    
    F.B.M. Vanhorck et al., "A RAPID METHOD FOR MEASURING THE TRANSFER IMPEDANCE OF CONNECTORS", IEEE transactions on electromagnetic compatibility, 40(3), 1998, pp. 193-200
58. DEUTSCH A
    ELECTRICAL CHARACTERISTICS OF INTERCONNECTIONS FOR HIGH-PERFORMANCE SYSTEMS
    Proceedings of the IEEE
    
    A. Deutsch, "ELECTRICAL CHARACTERISTICS OF INTERCONNECTIONS FOR HIGH-PERFORMANCE SYSTEMS", Proceedings of the IEEE, 86(2), 1998, pp. 315-355
59. LEHNER R; MAASSEN MM; LEYSIEFFER H; PLESTER D; ZENNER HP
    ELEMENTS FOR COUPLING AN IMPLANTABLE HEAR ING-AID TRANSDUCER TO THE OSSICLES OR PERILYMPH BY COLD DEFORMATION
    HNO. Hals-, Nasen-, Ohrenarzte
    
    R. Lehner et al., "ELEMENTS FOR COUPLING AN IMPLANTABLE HEAR ING-AID TRANSDUCER TO THE OSSICLES OR PERILYMPH BY COLD DEFORMATION", HNO. Hals-, Nasen-, Ohrenarzte, 46(1), 1998, pp. 27-37
60. MITACHI S; NAGASE R; TAKEUCHI Y; HONDA R
    DURABLE GLASS-CERAMIC FERRULE FOR GENERAL TELECOMMUNICATION USE
    Glass technology
    
    S. Mitachi et al., "DURABLE GLASS-CERAMIC FERRULE FOR GENERAL TELECOMMUNICATION USE", Glass technology, 39(3), 1998, pp. 98-99
61. NAGASE R; KATO K; IWANO S; MITACHI S
    SIMPLIFIED SC-TYPE RECEPTACLES FOR OPTICAL SUBSCRIBER SYSTEMS
    Electronics & communications in Japan. Part 2, Electronics
    
    R. Nagase et al., "SIMPLIFIED SC-TYPE RECEPTACLES FOR OPTICAL SUBSCRIBER SYSTEMS", Electronics & communications in Japan. Part 2, Electronics, 80(3), 1997, pp. 39-46
62. KARASAWA K; CHEN ZK; SAWA K
    CONTACT RESISTANCE INCREASE IN PALLADIUM MATERIAL AS A RESULT OF MECHANOCHEMICAL REACTION
    Electronics & communications in Japan. Part 2, Electronics
    
    K. Karasawa et al., "CONTACT RESISTANCE INCREASE IN PALLADIUM MATERIAL AS A RESULT OF MECHANOCHEMICAL REACTION", Electronics & communications in Japan. Part 2, Electronics, 80(2), 1997, pp. 33-44
63. DEUTSCH A; SUROVIC CW; CAMPBELL JS; COTEUS PW; LANZETTA AP; HOLTON JT; KNIGHT AD
    ELECTRICAL CHARACTERISTICS OF HIGH-PERFORMANCE PIN-IN-SOCKET AND PAD-ON-PAD CONNECTORS
    IEEE transactions on components, packaging, and manufacturing technology. Part B, Advanced packaging
    
    A. Deutsch et al., "ELECTRICAL CHARACTERISTICS OF HIGH-PERFORMANCE PIN-IN-SOCKET AND PAD-ON-PAD CONNECTORS", IEEE transactions on components, packaging, and manufacturing technology. Part B, Advanced packaging, 20(1), 1997, pp. 64-77
64. TAKEUCHI Y; MITACHI S; NAGASE R
    HIGH-STRENGTH GLASS-CERAMIC FERRULE FOR SC-TYPE SINGLE-MODE OPTICAL-FIBER CONNECTOR
    IEEE photonics technology letters
    
    Y. Takeuchi et al., "HIGH-STRENGTH GLASS-CERAMIC FERRULE FOR SC-TYPE SINGLE-MODE OPTICAL-FIBER CONNECTOR", IEEE photonics technology letters, 9(11), 1997, pp. 1502-1504
65. NAGASE R; KATO K; IWANO S; MITACHI S
    SIMPLIFIED SC-TYPE RECEPTACLES FOR ONU
    NTT review
    
    R. Nagase et al., "SIMPLIFIED SC-TYPE RECEPTACLES FOR ONU", NTT review, 9(2), 1997, pp. 58-62
66. WANG R; ELWI AE; HATZINIKOLAS MA
    DESIGN OF SLENDER SHEAR CONNECTED MASONRY CAVITY WALLS
    Canadian journal of civil engineering
    
    R. Wang et al., "DESIGN OF SLENDER SHEAR CONNECTED MASONRY CAVITY WALLS", Canadian journal of civil engineering, 24(5), 1997, pp. 808-818
67. ADEBAR P; VANLEEUWEN J
    SHEAR-STRENGTH OF CONCRETE-STEEL HYBRID BRIDGE GIRDERS
    Canadian journal of civil engineering
    
    P. Adebar e J. Vanleeuwen, "SHEAR-STRENGTH OF CONCRETE-STEEL HYBRID BRIDGE GIRDERS", Canadian journal of civil engineering, 24(1), 1997, pp. 122-134
68. MULLER DJ; ENGEL A; CARRASCOSA JL; VELEZ M
    THE BACTERIOPHAGE PHI-29 HEAD-TAIL CONNECTOR IMAGED AT HIGH-RESOLUTION WITH THE ATOMIC-FORCE MICROSCOPE IN BUFFER SOLUTION
    EMBO journal
    
    D.J. Muller et al., "THE BACTERIOPHAGE PHI-29 HEAD-TAIL CONNECTOR IMAGED AT HIGH-RESOLUTION WITH THE ATOMIC-FORCE MICROSCOPE IN BUFFER SOLUTION", EMBO journal, 16(10), 1997, pp. 2547-2553
69. BROWN JD; MOSS HA; ELLIOTT TSJ
    THE POTENTIAL FOR CATHETER MICROBIAL-CONTAMINATION FROM A NEEDLELESS CONNECTOR
    The Journal of hospital infection
    
    J.D. Brown et al., "THE POTENTIAL FOR CATHETER MICROBIAL-CONTAMINATION FROM A NEEDLELESS CONNECTOR", The Journal of hospital infection, 36(3), 1997, pp. 181-189
70. BENTLEY JM; LINK PJ
    EVALUATION OF MOTOR POWER-CABLES FOR PWM AC DRIVES
    IEEE transactions on industry applications
    
    J.M. Bentley e P.J. Link, "EVALUATION OF MOTOR POWER-CABLES FOR PWM AC DRIVES", IEEE transactions on industry applications, 33(2), 1997, pp. 342-358
71. OGUEJIOFOR EC; HOSAIN MU
    NUMERICAL-ANALYSIS OF PUSH-OUT SPECIMENS WITH PERFOBOND RIB CONNECTORS
    Computers & structures
    
    E.C. Oguejiofor e M.U. Hosain, "NUMERICAL-ANALYSIS OF PUSH-OUT SPECIMENS WITH PERFOBOND RIB CONNECTORS", Computers & structures, 62(4), 1997, pp. 617-624
72. OEHLERS DJ
    LONGITUDINAL SPLITTING IN THE ANCHORAGE ZONES OF POSTTENSIONED MEMBERS
    Magazine of Concrete Research
    
    D.J. Oehlers, "LONGITUDINAL SPLITTING IN THE ANCHORAGE ZONES OF POSTTENSIONED MEMBERS", Magazine of Concrete Research, 49(180), 1997, pp. 173-183
73. SERCU S; MARTENS L
    HIGH-FREQUENCY CIRCUIT MODELING OF LARGE PIN COUNT PACKAGES
    IEEE transactions on microwave theory and techniques
    
    S. Sercu e L. Martens, "HIGH-FREQUENCY CIRCUIT MODELING OF LARGE PIN COUNT PACKAGES", IEEE transactions on microwave theory and techniques, 45(10), 1997, pp. 1897-1904
74. KATZIER H; REISCHL R; PAGNIN P
    SPICE-MODELS FOR HIGH-PINCOUNT BOARD CONNECTORS
    IEEE transactions on components, packaging, and manufacturing technology. Part B, Advanced packaging
    
    H. Katzier et al., "SPICE-MODELS FOR HIGH-PINCOUNT BOARD CONNECTORS", IEEE transactions on components, packaging, and manufacturing technology. Part B, Advanced packaging, 19(1), 1996, pp. 3-6
75. BRAUNOVIC M; LABRECQUE C
    SHAPE-MEMORY ALLOY MECHANICAL CONTACT DEVICES
    IEEE transactions on components, packaging, and manufacturing technology. Part A
    
    M. Braunovic e C. Labrecque, "SHAPE-MEMORY ALLOY MECHANICAL CONTACT DEVICES", IEEE transactions on components, packaging, and manufacturing technology. Part A, 19(3), 1996, pp. 295-303
76. ANTLER M
    CORROSION CONTROL AND LUBRICATION OF PLATED NOBLE-METAL CONNECTOR CONTACTS
    IEEE transactions on components, packaging, and manufacturing technology. Part A
    
    M. Antler, "CORROSION CONTROL AND LUBRICATION OF PLATED NOBLE-METAL CONNECTOR CONTACTS", IEEE transactions on components, packaging, and manufacturing technology. Part A, 19(3), 1996, pp. 304-312
77. MODESTE F; CAUDE M; DEVAUX P
    ONLINE COUPLING OF LIQUID-CHROMATOGRAPHY AND CAPILLARY GAS-CHROMATOGRAPHY FOR THE DETERMINATION OF A TRACE PYRETHROID INSECTICIDE IN FRUIT EXTRACTS
    HRC. Journal of high resolution chromatography
    
    F. Modeste et al., "ONLINE COUPLING OF LIQUID-CHROMATOGRAPHY AND CAPILLARY GAS-CHROMATOGRAPHY FOR THE DETERMINATION OF A TRACE PYRETHROID INSECTICIDE IN FRUIT EXTRACTS", HRC. Journal of high resolution chromatography, 19(10), 1996, pp. 535-542
78. WARASHINA Y; IIDA T; IKEYA T; KYOMASU M
    SINGLE-MODE FIBER-COMPATIBLE PLASTIC-MOLDED SURFACE-CONTACT RECEPTACLES
    Optical engineering
    
    Y. Warashina et al., "SINGLE-MODE FIBER-COMPATIBLE PLASTIC-MOLDED SURFACE-CONTACT RECEPTACLES", Optical engineering, 35(11), 1996, pp. 3110-3116
79. VATOVEC M; GUPTA R; MILLER T
    TESTING AND EVALUATION OF METAL-PLATE-CONNECTED WOOD TRUSS JOINTS
    Journal of testing and evaluation
    
    M. Vatovec et al., "TESTING AND EVALUATION OF METAL-PLATE-CONNECTED WOOD TRUSS JOINTS", Journal of testing and evaluation, 24(2), 1996, pp. 63-72
80. VATOVEC M; MILLER TH; GUPTA R
    MODELING OF METAL-PLATE-CONNECTED WOOD TRUSS JOINTS
    Transactions of the ASAE
    
    M. Vatovec et al., "MODELING OF METAL-PLATE-CONNECTED WOOD TRUSS JOINTS", Transactions of the ASAE, 39(3), 1996, pp. 1101-1111
81. OKA H; SUGIURA N; YASUDA K
    SUITABLE CONDITIONS FOR CONNECTIONS THROUGH THE PLATED THROUGH HOLE OF PRINTED-CIRCUIT BOARDS
    IEICE transactions on electronics
    
    H. Oka et al., "SUITABLE CONDITIONS FOR CONNECTIONS THROUGH THE PLATED THROUGH HOLE OF PRINTED-CIRCUIT BOARDS", IEICE transactions on electronics, E78C(3), 1995, pp. 304-310
82. PINTAR FA; MAIMAN DJ; YOGANANDAN N; DROESE KW; HOLLOWELL JP; WOODARD E
    ROTATIONAL STABILITY OF A SPINAL PEDICLE SCREW ROD SYSTEM/
    Journal of spinal disorders
    
    F.A. Pintar et al., "ROTATIONAL STABILITY OF A SPINAL PEDICLE SCREW ROD SYSTEM/", Journal of spinal disorders, 8(1), 1995, pp. 49-55
83. HAMMONS TJ; TAY BW; KOK KL
    POWER LINKS WITH IRELAND - EXCITATION OF TURBINE-GENERATOR SHAFT TORSIONAL VIBRATIONS BY VARIABLE FREQUENCY CURRENTS SUPERIMPOSED ON DC CURRENTS IN ASYNCHRONOUS HVDC LINKS
    IEEE transactions on power systems
    
    T.J. Hammons et al., "POWER LINKS WITH IRELAND - EXCITATION OF TURBINE-GENERATOR SHAFT TORSIONAL VIBRATIONS BY VARIABLE FREQUENCY CURRENTS SUPERIMPOSED ON DC CURRENTS IN ASYNCHRONOUS HVDC LINKS", IEEE transactions on power systems, 10(3), 1995, pp. 1572-1579
84. FANTOZZI J; HUMPHREY PE
    EFFECTS OF BENDING MOMENTS ON THE TENSILE PERFORMANCE OF MULTIPLE-BOLTED TIMBER CONNECTORS .1. A TECHNIQUE TO MODEL SUCH JOINTS
    Wood and fiber science
    
    J. Fantozzi e P.E. Humphrey, "EFFECTS OF BENDING MOMENTS ON THE TENSILE PERFORMANCE OF MULTIPLE-BOLTED TIMBER CONNECTORS .1. A TECHNIQUE TO MODEL SUCH JOINTS", Wood and fiber science, 27(1), 1995, pp. 55-67
85. DEZI L; LEONI G; TARANTINO AM
    TIME-DEPENDENT ANALYSIS OF PRESTRESSED COMPOSITE BEAMS
    Journal of structural engineering
    
    L. Dezi et al., "TIME-DEPENDENT ANALYSIS OF PRESTRESSED COMPOSITE BEAMS", Journal of structural engineering, 121(4), 1995, pp. 621-633
86. OGUEJIOFOR EC; HOSAIN MU
    TESTS OF FULL-SIZE COMPOSITE BEAMS WITH PERFOBOND RIB CONNECTORS
    Canadian journal of civil engineering
    
    E.C. Oguejiofor e M.U. Hosain, "TESTS OF FULL-SIZE COMPOSITE BEAMS WITH PERFOBOND RIB CONNECTORS", Canadian journal of civil engineering, 22(1), 1995, pp. 80-92
87. CLEMENT DP; OSTERBERG U
    LASER-DIODE TO SINGLE-MODE FIBER COUPLING USING AN OUT-OF-PLANE MISALIGNMENT MODEL
    Optical engineering
    
    D.P. Clement e U. Osterberg, "LASER-DIODE TO SINGLE-MODE FIBER COUPLING USING AN OUT-OF-PLANE MISALIGNMENT MODEL", Optical engineering, 34(1), 1995, pp. 63-74
88. STENNETT NA; CAMPBELL DS
    NORMAL FORCE REDUCTION - A VARIABLE ACTIVATION-ENERGY PROCESS
    IEEE transactions on components, packaging, and manufacturing technology. Part A
    
    N.A. Stennett e D.S. Campbell, "NORMAL FORCE REDUCTION - A VARIABLE ACTIVATION-ENERGY PROCESS", IEEE transactions on components, packaging, and manufacturing technology. Part A, 17(1), 1994, pp. 128-133
89. COHEN JA; WINSTON RS
    ASSESSMENT OF MASSETER SPASM COMPLICATED BY A FAULTY TEMPERATURE PROBE
    Journal of clinical anesthesia
    
    J.A. Cohen e R.S. Winston, "ASSESSMENT OF MASSETER SPASM COMPLICATED BY A FAULTY TEMPERATURE PROBE", Journal of clinical anesthesia, 6(6), 1994, pp. 521-524
90. BRUNEAU M; COHEN JM
    REVIEW OF NBCC EARTHQUAKE-RESISTANT DESIGN REQUIREMENTS FOR CLADDING CONNECTORS
    Canadian journal of civil engineering
    
    M. Bruneau e J.M. Cohen, "REVIEW OF NBCC EARTHQUAKE-RESISTANT DESIGN REQUIREMENTS FOR CLADDING CONNECTORS", Canadian journal of civil engineering, 21(3), 1994, pp. 455-460
91. SWEESY MW; FORNEY RC; ERICKSON S; BATEY RL
    PERFORMANCE OF A 3.2-MN TO 6-MM ADAPTER
    PACE-PACING AND CLINICAL ELECTROPHYSIOLOGY
    
    M.W. Sweesy et al., "PERFORMANCE OF A 3.2-MN TO 6-MM ADAPTER", PACE, 17(2), 1994, pp. 138-140
92. DEZI L
    SHRINKAGE EFFECTS IN COMPOSITE BEAMS WITH FLEXIBLE CONNECTION
    Journal of constructional steel research
    
    L. Dezi, "SHRINKAGE EFFECTS IN COMPOSITE BEAMS WITH FLEXIBLE CONNECTION", Journal of constructional steel research, 28(3), 1994, pp. 295-320
93. CHEN SH; LIU ZS
    SUBSTRUCTURE-ANALYSIS OF COMPLEX STRUCTURE WITH WEAK CONNECTORS USINGMATRIX PERTURBATION
    JSME international journal. Series C, dynamics, control, robotics, design and manufacturing
    
    S.H. Chen e Z.S. Liu, "SUBSTRUCTURE-ANALYSIS OF COMPLEX STRUCTURE WITH WEAK CONNECTORS USINGMATRIX PERTURBATION", JSME international journal. Series C, dynamics, control, robotics, design and manufacturing, 36(3), 1993, pp. 307-311
94. IBANEZ C
    CONSTRUCTION OF AN ALL-GLASS FUSED-SILICA, ZERO DEAD VOLUME MULTIDIMENSIONAL GAS-CHROMATOGRAPHIC SYSTEM USING PRESS-FIT CONNECTORS - PRELIMINARY-RESULTS
    HRC. Journal of high resolution chromatography
    
    C. Ibanez, "CONSTRUCTION OF AN ALL-GLASS FUSED-SILICA, ZERO DEAD VOLUME MULTIDIMENSIONAL GAS-CHROMATOGRAPHIC SYSTEM USING PRESS-FIT CONNECTORS - PRELIMINARY-RESULTS", HRC. Journal of high resolution chromatography, 16(9), 1993, pp. 552-554
95. TEMPLE MC; ELMAHDY G
    BUCKLING OF BUILT-UP COMPRESSION MEMBERS IN THE PLANE OF THE CONNECTORS
    Canadian journal of civil engineering
    
    M.C. Temple e G. Elmahdy, "BUCKLING OF BUILT-UP COMPRESSION MEMBERS IN THE PLANE OF THE CONNECTORS", Canadian journal of civil engineering, 20(6), 1993, pp. 895-909
96. TEMPLE MC; ELMAHDY G
    EQUIVALENT SLENDERNESS RATIO FOR BUILT-UP MEMBERS
    Canadian journal of civil engineering
    
    M.C. Temple e G. Elmahdy, "EQUIVALENT SLENDERNESS RATIO FOR BUILT-UP MEMBERS", Canadian journal of civil engineering, 20(4), 1993, pp. 708-711
97. VANGELDER BM; BRACKE FALE; ELGAMAL MIH
    ADAPTER FAILURE AS A CAUSE OF PACEMAKER MALFUNCTION
    PACE-PACING AND CLINICAL ELECTROPHYSIOLOGY
    
    B.M. Vangelder et al., "ADAPTER FAILURE AS A CAUSE OF PACEMAKER MALFUNCTION", PACE, 16(10), 1993, pp. 1961-1965
98. DERVOS CT; KARAGIANNOPOULOS CG; BOURKAS PD; KAGARAKIS CA
    MEASUREMENTS ON STATIONARY METAL CONTACTS UNDER HIGH CHARGE INJECTIONRATES
    IEE proceedings. Part C. Generation, transmission and distribution
    
    C.T. Dervos et al., "MEASUREMENTS ON STATIONARY METAL CONTACTS UNDER HIGH CHARGE INJECTIONRATES", IEE proceedings. Part C. Generation, transmission and distribution, 140(3), 1993, pp. 167-173
99. BARRY RA
    ALL-OPTICAL NONBLOCKING MXM SWITCHLESS CONNECTOR WITH O[ROOT(M-LOG-M)] WAVELENGTHS AND WITHOUT WAVELENGTH CHANGERS
    Electronics Letters
    
    R.A. Barry, "ALL-OPTICAL NONBLOCKING MXM SWITCHLESS CONNECTOR WITH O[ROOT(M-LOG-M)] WAVELENGTHS AND WITHOUT WAVELENGTH CHANGERS", Electronics Letters, 29(14), 1993, pp. 1252-1254