Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Cao, JW; Okada, A; Hirosaki, N
   Creep and stress-rupture behavior of Y2O3-Nd2O3-doped silicon nitrides with different additive contents
   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
   
   J.W. Cao et al., "Creep and stress-rupture behavior of Y2O3-Nd2O3-doped silicon nitrides with different additive contents", J EUR CERAM, 22(2), 2002, pp. 237-245
2. Nagano, T; Kaneko, K; Zhan, GD; Mitomo, M; Kim, YW
   Superplastic behavior of liquid-phase sintered beta-SiC prepared with oxynitride glasses in an N-2 atmosphere
   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
   
   T. Nagano et al., "Superplastic behavior of liquid-phase sintered beta-SiC prepared with oxynitride glasses in an N-2 atmosphere", J EUR CERAM, 22(2), 2002, pp. 263-270
3. Shi, Z; Ochiai, S; Gu, M; Hojo, M; Lee, JC
   The formation and thermostability of MgO and MgAl2O4 nanoparticles in oxidized SiC particle-reinforced Al-Mg composites
   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
   
   Z. Shi et al., "The formation and thermostability of MgO and MgAl2O4 nanoparticles in oxidized SiC particle-reinforced Al-Mg composites", APPL PHYS A, 74(1), 2002, pp. 97-104
4. Prins, R
   Catalytic hydrodenitrogenation
   ADVANCES IN CATALYSIS, VOL 46
   
   R. Prins, "Catalytic hydrodenitrogenation", ADV CATAL, 46, 2002, pp. 399-464
5. Chaussende, D; Ferro, G; Monteil, Y
   Vapour-liquid-solid mechanism for the growth of SiC homoepitaxial layers by VPE
   JOURNAL OF CRYSTAL GROWTH
   
   D. Chaussende et al., "Vapour-liquid-solid mechanism for the growth of SiC homoepitaxial layers by VPE", J CRYST GR, 234(1), 2002, pp. 63-69
6. Caudillo, M; Herrera-Trejo, M; Castro, MR; Ramirez, E; Gonzalez, CR; Juarez, JI
   On carbide dissolution in an as-cast ASTM F-75 alloy
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   M. Caudillo et al., "On carbide dissolution in an as-cast ASTM F-75 alloy", J BIOMED MR, 59(2), 2002, pp. 378-385
7. Olander, J; Larsson, K
   Influence of adsorbed species on the reconstruction of 4H-SiC(0001) surfaces
   JOURNAL OF PHYSICAL CHEMISTRY B
   
   J. Olander e K. Larsson, "Influence of adsorbed species on the reconstruction of 4H-SiC(0001) surfaces", J PHYS CH B, 105(32), 2001, pp. 7619-7623
8. Ding, WP; Li, SZ; Meitzner, GD; Iglesia, E
   Methane conversion to aromatics on Mo/H-ZSM5: Structure of molybdenum species in working catalysts
   JOURNAL OF PHYSICAL CHEMISTRY B
   
   W.P. Ding et al., "Methane conversion to aromatics on Mo/H-ZSM5: Structure of molybdenum species in working catalysts", J PHYS CH B, 105(2), 2001, pp. 506-513
9. Hada, K; Nagai, M; Omi, S
   Characterization and HDS activity of cobalt molybdenum nitrides
   JOURNAL OF PHYSICAL CHEMISTRY B
   
   K. Hada et al., "Characterization and HDS activity of cobalt molybdenum nitrides", J PHYS CH B, 105(19), 2001, pp. 4084-4093
10. Bugyi, L; Solymosi, F
    Effects of potassium on the chemisorption of CO on the Mo2C/Mo(100) surface
    JOURNAL OF PHYSICAL CHEMISTRY B
    
    L. Bugyi e F. Solymosi, "Effects of potassium on the chemisorption of CO on the Mo2C/Mo(100) surface", J PHYS CH B, 105(19), 2001, pp. 4337-4342
11. Jenkins, MG; Mark, KY
    Finite element analysis model of the cumulative damage failure process in a continuous-fibre ceramic composite loaded in flexure
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    
    M.G. Jenkins e K.Y. Mark, "Finite element analysis model of the cumulative damage failure process in a continuous-fibre ceramic composite loaded in flexure", P I MEC E L, 215(L2), 2001, pp. 87-97
12. Shim, I; Gingerich, KA
    All-electron ab initio investigation of the electronic states of the PdC molecule
    CHEMPHYSCHEM
    
    I. Shim e K.A. Gingerich, "All-electron ab initio investigation of the electronic states of the PdC molecule", CHEMPHYSCHE, 2(2), 2001, pp. 125
13. Wang, ZL; Gao, RP; Pan, ZW; Dai, ZR
    Nano-scale mechanics of nanotubes, nanowires, and nanobelts
    ADVANCED ENGINEERING MATERIALS
    
    Z.L. Wang et al., "Nano-scale mechanics of nanotubes, nanowires, and nanobelts", ADV ENG MAT, 3(9), 2001, pp. 657-661
14. Case, ED; Crimp, MA
    Joining of ceramic materials using spin-on interlayers
    ADVANCED ENGINEERING MATERIALS
    
    E.D. Case e M.A. Crimp, "Joining of ceramic materials using spin-on interlayers", ADV ENG MAT, 3(6), 2001, pp. 395-399
15. Darmawan, W; Tanaka, C; Usuki, H; Ohtani, T
    Performance of coated carbide tools in turning wood-based materials: Effect of cutting speeds and coating materials on the wear characteristics of coated carbide tools in turning wood-chip cement board
    JOURNAL OF WOOD SCIENCE
    
    W. Darmawan et al., "Performance of coated carbide tools in turning wood-based materials: Effect of cutting speeds and coating materials on the wear characteristics of coated carbide tools in turning wood-chip cement board", J WOOD SCI, 47(5), 2001, pp. 342-349
16. Darmawan, W; Tanaka, C; Usuki, H; Ohtani, T
    Performance of coated carbide tools when grooving wood-based materials: effect of work materials and coating materials on the wear resistance of coated carbide tools
    JOURNAL OF WOOD SCIENCE
    
    W. Darmawan et al., "Performance of coated carbide tools when grooving wood-based materials: effect of work materials and coating materials on the wear resistance of coated carbide tools", J WOOD SCI, 47(2), 2001, pp. 94-101
17. Blessing, N; Burkart, S; Gantefor, G
    Production of large metallocarbohedrene clusters using a pulsed arc cluster ion source
    EUROPEAN PHYSICAL JOURNAL D
    
    N. Blessing et al., "Production of large metallocarbohedrene clusters using a pulsed arc cluster ion source", EUR PHY J D, 17(1), 2001, pp. 37-41
18. Benzi, P; Castiglioni, M; Volpe, P
    Characterisation and properties of amorphous nonstoichiometric Ge1-xCx : Hcompounds obtained from X-ray radiolysis of germane/ethylene mixtures
    EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
    
    P. Benzi et al., "Characterisation and properties of amorphous nonstoichiometric Ge1-xCx : Hcompounds obtained from X-ray radiolysis of germane/ethylene mixtures", EUR J INORG, (5), 2001, pp. 1235-1242
19. Ersoy, DA; McNallan, MJ; Gogotsi, Y
    Carbon coatings produced by high temperature chlorination of silicon carbide ceramics
    MATERIALS RESEARCH INNOVATIONS
    
    D.A. Ersoy et al., "Carbon coatings produced by high temperature chlorination of silicon carbide ceramics", MAT RES INN, 5(2), 2001, pp. 55-62
20. Zhou, YC; Wang, XH
    Deformation of polycrystalline Ti2AlC under compression
    MATERIALS RESEARCH INNOVATIONS
    
    Y.C. Zhou e X.H. Wang, "Deformation of polycrystalline Ti2AlC under compression", MAT RES INN, 5(2), 2001, pp. 87-93
21. Kaiser, U; Chuvilin, A; Kyznetsov, V; Butenko, Y
    Evidence for 9R-SiC?
    MICROSCOPY AND MICROANALYSIS
    
    U. Kaiser et al., "Evidence for 9R-SiC?", MICROS MICR, 7(4), 2001, pp. 368-369
22. Pascoli, G; Lavendy, H
    Comparative ab initio studies of heteroatom-doped carbon clusters CnXp+ (X= P, S; n+p=3-6)
    INTERNATIONAL JOURNAL OF MASS SPECTROMETRY
    
    G. Pascoli e H. Lavendy, "Comparative ab initio studies of heteroatom-doped carbon clusters CnXp+ (X= P, S; n+p=3-6)", INT J MASS, 206(1-2), 2001, pp. 153-176
23. Matsuda, T; Hirata, Y; Itoh, H; Sakagami, H; Takahashi, N
    Effect of reduction temperature on the transformation of MoO3 to MoOx witha large surface area
    MICROPOROUS AND MESOPOROUS MATERIALS
    
    T. Matsuda et al., "Effect of reduction temperature on the transformation of MoO3 to MoOx witha large surface area", MICROP M M, 42(2-3), 2001, pp. 337-344
24. Henning, T; Mutschke, H
    Formation and spectroscopy of carbides
    SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
    
    T. Henning e H. Mutschke, "Formation and spectroscopy of carbides", SPECT ACT A, 57(4), 2001, pp. 815-824
25. Pages, X; Rouessac, V; Cot, D; Nabias, G; Durand, J
    Gas permeation of PECVD membranes inside alumina substrate tubes
    SEPARATION AND PURIFICATION TECHNOLOGY
    
    X. Pages et al., "Gas permeation of PECVD membranes inside alumina substrate tubes", SEP PURIF T, 25(1-3), 2001, pp. 399-406
26. Shturbin, AV; Titkov, IE; Panevin, VY; Witman, RF
    High-frequency method to determine SiC crystal conductivity
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
    
    A.V. Shturbin et al., "High-frequency method to determine SiC crystal conductivity", MAT SC S PR, 4(1-3), 2001, pp. 205-207
27. Bourne, NK
    The onset of damage in shocked alumina
    PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
    
    N.K. Bourne, "The onset of damage in shocked alumina", P ROY SOC A, 457(2013), 2001, pp. 2189-2205
28. Urena, A; Gil, L; Escriche, E; de Salazar, JMG; Escalera, MD
    High temperature soldering of SiC particulate aluminium matrix composites (series 2000) using Zn-Al filler alloys
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
    
    A. Urena et al., "High temperature soldering of SiC particulate aluminium matrix composites (series 2000) using Zn-Al filler alloys", SCI TEC W J, 6(1), 2001, pp. 1-11
29. Kear, BH; Skandan, G; Sadangi, RK
    Factors controlling decarburization in HVOF sprayed nano-WC/Co hardcoatings
    SCRIPTA MATERIALIA
    
    B.H. Kear et al., "Factors controlling decarburization in HVOF sprayed nano-WC/Co hardcoatings", SCR MATER, 44(8-9), 2001, pp. 1703-1707
30. Gao, YH; Bando, Y; Kurashima, K; Sato, T
    The microstructural analysis of SiC nanorods synthesized through carbothermal reduction
    SCRIPTA MATERIALIA
    
    Y.H. Gao et al., "The microstructural analysis of SiC nanorods synthesized through carbothermal reduction", SCR MATER, 44(8-9), 2001, pp. 1941-1944
31. Khalid, FA
    Copper precipitation in M23C6 grain boundary carbides in alloy steel
    SCRIPTA MATERIALIA
    
    F.A. Khalid, "Copper precipitation in M23C6 grain boundary carbides in alloy steel", SCR MATER, 44(5), 2001, pp. 797-801
32. Lee, JW; Liu, TF
    Phase transformations in an Fe-8Al-10Ni-2C alloy
    SCRIPTA MATERIALIA
    
    J.W. Lee e T.F. Liu, "Phase transformations in an Fe-8Al-10Ni-2C alloy", SCR MATER, 44(2), 2001, pp. 257-262
33. Kajiwara, S; Liu, D; Kikuchi, T; Shinya, N
    Remarkable improvement of shape memory effect in Fe-Mn-Si based shape memory alloys by producing NbC precipitates
    SCRIPTA MATERIALIA
    
    S. Kajiwara et al., "Remarkable improvement of shape memory effect in Fe-Mn-Si based shape memory alloys by producing NbC precipitates", SCR MATER, 44(12), 2001, pp. 2809-2814
34. Wen, G; Li, SB; Zhang, BS; Guo, ZX
    Reaction synthesis of TiB2-TiC composites with enhanced toughness
    ACTA MATERIALIA
    
    G. Wen et al., "Reaction synthesis of TiB2-TiC composites with enhanced toughness", ACT MATER, 49(8), 2001, pp. 1463-1470
35. Wu, H; Roberts, SG; Derby, B
    Residual stress and subsurface damage in machined alumina and alumina/silicon carbide nanocomposite ceramics
    ACTA MATERIALIA
    
    H. Wu et al., "Residual stress and subsurface damage in machined alumina and alumina/silicon carbide nanocomposite ceramics", ACT MATER, 49(3), 2001, pp. 507-517
36. Sun, Z; Zhou, Y; Li, M
    High temperature oxidation behavior of Ti3SiC2-based material in air
    ACTA MATERIALIA
    
    Z. Sun et al., "High temperature oxidation behavior of Ti3SiC2-based material in air", ACT MATER, 49(20), 2001, pp. 4347-4353
37. Espinosa, HD; Gailly, BA
    Modeling of shear instabilities observed in cylinder collapse experiments performed on ceramic powders
    ACTA MATERIALIA
    
    H.D. Espinosa e B.A. Gailly, "Modeling of shear instabilities observed in cylinder collapse experiments performed on ceramic powders", ACT MATER, 49(19), 2001, pp. 4135-4147
38. Sarrafi-Nour, GR; Coyle, TW
    Temperature dependence of crack wake bridging stresses in a SiC-whisker-reinforced alumina
    ACTA MATERIALIA
    
    G.R. Sarrafi-Nour e T.W. Coyle, "Temperature dependence of crack wake bridging stresses in a SiC-whisker-reinforced alumina", ACT MATER, 49(17), 2001, pp. 3553-3563
39. Ferroni, LP; Pezzotti, G; Isshiki, T; Kleebe, HJ
    Determination of amorphous interfacial phases in Al2O3/SiC nanocomposites by computer-aided high resolution electron microscopy
    ACTA MATERIALIA
    
    L.P. Ferroni et al., "Determination of amorphous interfacial phases in Al2O3/SiC nanocomposites by computer-aided high resolution electron microscopy", ACT MATER, 49(11), 2001, pp. 2109-2113
40. Chung, DDL
    Materials for thermal conduction
    APPLIED THERMAL ENGINEERING
    
    D.D.L. Chung, "Materials for thermal conduction", APPL TH ENG, 21(16), 2001, pp. 1593-1605
41. Jacobson, NS; Opila, EJ; Lee, KN
    Oxidation and corrosion of ceramics and ceramic matrix composites
    CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
    
    N.S. Jacobson et al., "Oxidation and corrosion of ceramics and ceramic matrix composites", CURR OP SOL, 5(4), 2001, pp. 301-309
42. Lison, D; De Boeck, M; Verougstraete, V; Kirsch-Volders, M
    Update on the genotoxicity and carcinogenicity of cobalt compounds
    OCCUPATIONAL AND ENVIRONMENTAL MEDICINE
    
    D. Lison et al., "Update on the genotoxicity and carcinogenicity of cobalt compounds", OCC ENVIR M, 58(10), 2001, pp. 619-625
43. Johnson, CM; Wright, NG; Uren, MJ; Hilton, KP; Rahimo, M; Hinchley, DA; Knights, AP; Morrison, DJ; Horsfall, AB; Ortolland, S; O'Neill, AG
    Recent progress and current issues in SiC semiconductor devices for power applications
    IEE PROCEEDINGS-CIRCUITS DEVICES AND SYSTEMS
    
    C.M. Johnson et al., "Recent progress and current issues in SiC semiconductor devices for power applications", IEE P-CIRC, 148(2), 2001, pp. 101-108
44. Lee, GH; Kang, S
    Synthesis of nano-sized WC-Co powders by reduction-carburization process
    MATERIALS TRANSACTIONS
    
    G.H. Lee e S. Kang, "Synthesis of nano-sized WC-Co powders by reduction-carburization process", MATER TRANS, 42(8), 2001, pp. 1575-1581
45. Okumiya, M; Tsunekawa, Y; Fukaya, K; Mohri, N
    Formation of TiC/Ti2AlC composite layer and improvement on surface roughness
    MATERIALS TRANSACTIONS
    
    M. Okumiya et al., "Formation of TiC/Ti2AlC composite layer and improvement on surface roughness", MATER TRANS, 42(8), 2001, pp. 1717-1722
46. Hiraga, H; Inoue, T; Kamado, S; Kojima, Y
    Improving the wear resistance of a magnesium alloy by laser melt injection
    MATERIALS TRANSACTIONS
    
    H. Hiraga et al., "Improving the wear resistance of a magnesium alloy by laser melt injection", MATER TRANS, 42(7), 2001, pp. 1322-1325
47. Kagawa, A; Imaizumi, T; Mizumoto, M
    Pressure-induced transition from graphite eutectic to carbide eutectic in iron-carbon-silicon alloys
    MATERIALS TRANSACTIONS
    
    A. Kagawa et al., "Pressure-induced transition from graphite eutectic to carbide eutectic in iron-carbon-silicon alloys", MATER TRANS, 42(7), 2001, pp. 1385-1391
48. Gunjishima, I; Akashi, T; Goto, T
    Thermoelectric properties of single crystalline B4C prepared by a floatingzone method
    MATERIALS TRANSACTIONS
    
    I. Gunjishima et al., "Thermoelectric properties of single crystalline B4C prepared by a floatingzone method", MATER TRANS, 42(7), 2001, pp. 1445-1450
49. Ito, M; Nagai, H; Katsura, T; Katsuyama, S; Majima, K
    Preparation of SiC dispersed Fe0.98Co0.02Si2 by pressureless sintering with Cu and Si addition and its thermoelectric performance
    MATERIALS TRANSACTIONS
    
    M. Ito et al., "Preparation of SiC dispersed Fe0.98Co0.02Si2 by pressureless sintering with Cu and Si addition and its thermoelectric performance", MATER TRANS, 42(7), 2001, pp. 1451-1457
50. Sekigawa, T; Oguir, K; Kochiyama, J; Miho, K
    Endurance test of oxidation-resistant CVD-SIC coating on C/C composites for space vehicle
    MATERIALS TRANSACTIONS
    
    T. Sekigawa et al., "Endurance test of oxidation-resistant CVD-SIC coating on C/C composites for space vehicle", MATER TRANS, 42(5), 2001, pp. 825-828
51. Kim, BH; Suhr, DS
    Characteristics of HVOF-sprayed WC-Co cermet coatings affected by WC particle size and fuel/oxygen ratio
    MATERIALS TRANSACTIONS
    
    B.H. Kim e D.S. Suhr, "Characteristics of HVOF-sprayed WC-Co cermet coatings affected by WC particle size and fuel/oxygen ratio", MATER TRANS, 42(5), 2001, pp. 833-837
52. Yamada, T; Tsuzuku, T; Sato, H
    Superplastic deformation of continuous fiber reinforced titanium matrix composites
    MATERIALS TRANSACTIONS
    
    T. Yamada et al., "Superplastic deformation of continuous fiber reinforced titanium matrix composites", MATER TRANS, 42(5), 2001, pp. 842-849
53. Oguri, K; Sekigawa, T; Kochiyama, J; Miho, K
    Catalycity measurement of oxidation-resistant CVD-SiC coating on C/C composite for space vehicle
    MATERIALS TRANSACTIONS
    
    K. Oguri et al., "Catalycity measurement of oxidation-resistant CVD-SiC coating on C/C composite for space vehicle", MATER TRANS, 42(5), 2001, pp. 856-861
54. Nunogaki, M; Inoue, M; Kitahama, K
    Preparation of thick functionally graded layers of ceramics by surface modification of tantalum and titanium using high temperature plasma processing
    MATERIALS TRANSACTIONS
    
    M. Nunogaki et al., "Preparation of thick functionally graded layers of ceramics by surface modification of tantalum and titanium using high temperature plasma processing", MATER TRANS, 42(3), 2001, pp. 457-459
55. Schreck, M; Hormann, F; Roll, H; Bauer, T; Stritzker, B
    Heteroepitaxial diamond films on silicon substrates and on iridium layers:Analogies and differences in nucleation and growth
    NEW DIAMOND AND FRONTIER CARBON TECHNOLOGY
    
    M. Schreck et al., "Heteroepitaxial diamond films on silicon substrates and on iridium layers:Analogies and differences in nucleation and growth", NEW DIAM FR, 11(3), 2001, pp. 189-205
56. Campillo, C; Ilias, S; Borges, CFM; Moisan, M; Martinu, L
    Enhanced diamond film adhesion on cobalt-cemented WC substrates
    NEW DIAMOND AND FRONTIER CARBON TECHNOLOGY
    
    C. Campillo et al., "Enhanced diamond film adhesion on cobalt-cemented WC substrates", NEW DIAM FR, 11(2), 2001, pp. 147-156
57. Fujii, K; Noma, T; Masamura, O; Mayama, T
    Dynamic mechanical properties of materials measured by plate impact experiments (Si3N4, SiC and TiB2)
    JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING
    
    K. Fujii et al., "Dynamic mechanical properties of materials measured by plate impact experiments (Si3N4, SiC and TiB2)", JSME A, 44(2), 2001, pp. 251-258
58. Funatsu, M; Shirai, H; Kasuya, K
    Radiative characteristics of carbonaceous ablation layers with reflection effects
    JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING
    
    M. Funatsu et al., "Radiative characteristics of carbonaceous ablation layers with reflection effects", JSME I J B, 44(3), 2001, pp. 419-426
59. Vandenbulcke, L; De Barros, MI
    Mechanical applications of diamond layers
    VIDE-SCIENCE TECHNIQUE ET APPLICATIONS
    
    L. Vandenbulcke e M.I. De Barros, "Mechanical applications of diamond layers", VIDE, 56(300), 2001, pp. 394
60. Kim, CH; Kruth, JP
    Influence of the electrical conductivity of dielectric on WEDM of sinteredcarbide
    KSME INTERNATIONAL JOURNAL
    
    C.H. Kim e J.P. Kruth, "Influence of the electrical conductivity of dielectric on WEDM of sinteredcarbide", KSME INT J, 15(12), 2001, pp. 1676-1682
61. de Persis, S; Teyssandier, F
    Thermodynamic and kinetic criteria to select hydrocarbon precursor
    JOURNAL DE PHYSIQUE IV
    
    S. de Persis e F. Teyssandier, "Thermodynamic and kinetic criteria to select hydrocarbon precursor", J PHYS IV, 11(PR3), 2001, pp. 39-46
62. Hemeltjen, S; Heinrich, J; Marx, G; Dietrich, D; Nestler, K; Weise, K; Stockel, S
    Elementary steps and application of the CVD of SiC/BN double layers
    JOURNAL DE PHYSIQUE IV
    
    S. Hemeltjen et al., "Elementary steps and application of the CVD of SiC/BN double layers", J PHYS IV, 11(PR3), 2001, pp. 77-84
63. Ruppi, S
    Advances in chemically vapour deposited wear resistant coatings
    JOURNAL DE PHYSIQUE IV
    
    S. Ruppi, "Advances in chemically vapour deposited wear resistant coatings", J PHYS IV, 11(PR3), 2001, pp. 847-859
64. Pons, M; Meziere, J; Dedulle, JM; Kuan, SWT; Blanquet, E; Bernard, C; Ferret, P; Di Cioccio, L; Billon, T; Madar, R
    Simulation of the large-area growth of homoepitaxial 4H-SiC by chemical vapor deposition
    JOURNAL DE PHYSIQUE IV
    
    M. Pons et al., "Simulation of the large-area growth of homoepitaxial 4H-SiC by chemical vapor deposition", J PHYS IV, 11(PR3), 2001, pp. 1079-1086
65. Hariprakash, B; Bera, P; Martha, SK; Gaffoor, SA; Hegde, MS; Shukla, AK
    Ceria-supported platinum as hydrogen-oxygen recombinant catalyst for sealed lead-acid batteries
    ELECTROCHEMICAL AND SOLID STATE LETTERS
    
    B. Hariprakash et al., "Ceria-supported platinum as hydrogen-oxygen recombinant catalyst for sealed lead-acid batteries", EL SOLID ST, 4(3), 2001, pp. A23-A26
66. Theodoropoulou, N; Hebard, AF; Chu, SNG; Overberg, ME; Abernathy, CR; Pearton, SJ; Wilson, RG; Zavada, JM
    Magnetic properties of Fe- and Mn-implanted SiC
    ELECTROCHEMICAL AND SOLID STATE LETTERS
    
    N. Theodoropoulou et al., "Magnetic properties of Fe- and Mn-implanted SiC", EL SOLID ST, 4(12), 2001, pp. G119-G121
67. Ezugwu, EO; Olajire, KA; Jawaid, A
    Wear performance of multilayer-coated carbide tools
    MACHINING SCIENCE AND TECHNOLOGY
    
    E.O. Ezugwu et al., "Wear performance of multilayer-coated carbide tools", MACH SCI T, 5(1), 2001, pp. 115-129
68. Harris, H; Dance, I
    The geometric and electronic structures of niobium carbon clusters
    JOURNAL OF PHYSICAL CHEMISTRY A
    
    H. Harris e I. Dance, "The geometric and electronic structures of niobium carbon clusters", J PHYS CH A, 105(13), 2001, pp. 3340-3358
69. Lee, KB; Sim, HS; Cho, SY; Kwon, H
    Tensile properties of 5052 Al matrix composites reinforced with B4C particles
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    K.B. Lee et al., "Tensile properties of 5052 Al matrix composites reinforced with B4C particles", MET MAT T A, 32(8), 2001, pp. 2142-2147
70. Lee, JC; Ahn, JP; Shi, ZL; Shim, JH; Lee, HI
    Methodology to design the interfaces in SiC/Al composites
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    J.C. Lee et al., "Methodology to design the interfaces in SiC/Al composites", MET MAT T A, 32(6), 2001, pp. 1541-1550
71. Ghosh, G; Olson, GB
    Simulation of paraequilibrium growth in multicomponent systems
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    G. Ghosh e G.B. Olson, "Simulation of paraequilibrium growth in multicomponent systems", MET MAT T A, 32(3), 2001, pp. 455-467
72. El-Eskandarany, MS; Omori, M; Konno, TJ; Sumiyama, K; Hirai, T; Suzuki, K
    Synthesizing of nanocomposite WC/MgO powders by mechanical solid-state reduction and subsequent plasma-activated sintering
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    M.S. El-Eskandarany et al., "Synthesizing of nanocomposite WC/MgO powders by mechanical solid-state reduction and subsequent plasma-activated sintering", MET MAT T A, 32(1), 2001, pp. 157-164
73. Chen, JC; Chao, CG
    Numerical and experimental study of internal flow field for a carbon fibertow pneumatic spreader
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
    
    J.C. Chen e C.G. Chao, "Numerical and experimental study of internal flow field for a carbon fibertow pneumatic spreader", MET MAT T B, 32(2), 2001, pp. 329-339
74. Baglyuk, GA; Posnyak, LA
    Powder metallurgy wear-resistant materials based on iron. I. Materials prepared by sintering and infiltration
    POWDER METALLURGY AND METAL CERAMICS
    
    G.A. Baglyuk e L.A. Posnyak, "Powder metallurgy wear-resistant materials based on iron. I. Materials prepared by sintering and infiltration", POWD MET ME, 40(1-2), 2001, pp. 34-39
75. Davidchuk, NK; Gadzyra, NF; Gnesin, GG
    Some characteristic features of formation of ceramics based on composite powders SiC-Si3N4-Si2N2O
    POWDER METALLURGY AND METAL CERAMICS
    
    N.K. Davidchuk et al., "Some characteristic features of formation of ceramics based on composite powders SiC-Si3N4-Si2N2O", POWD MET ME, 40(1-2), 2001, pp. 49-53
76. Dyban, YP
    Structuring of multiphase compacts in the SiC-carbon system. I. Structuring in green blanks
    POWDER METALLURGY AND METAL CERAMICS
    
    Y.P. Dyban, "Structuring of multiphase compacts in the SiC-carbon system. I. Structuring in green blanks", POWD MET ME, 40(1-2), 2001, pp. 84-89
77. Awasthi, K; Singh, AK; Srivastava, ON
    Synthesis of carbon nanotubes through carbon arc evaporation employing Mm,La, and Ce catalysts
    FULLERENE SCIENCE AND TECHNOLOGY
    
    K. Awasthi et al., "Synthesis of carbon nanotubes through carbon arc evaporation employing Mm,La, and Ce catalysts", FUL SCI TEC, 9(3), 2001, pp. 397-407
78. Blank, TV; Gol'dberg, YA; Kalinina, EV; Konstantinov, OV; Konstantinov, AO; Hallen, A
    Temperature dependence of the quantum efficiency of 4H-SiC-Based Schottky photodiodes
    TECHNICAL PHYSICS LETTERS
    
    T.V. Blank et al., "Temperature dependence of the quantum efficiency of 4H-SiC-Based Schottky photodiodes", TECH PHYS L, 27(9), 2001, pp. 776-778
79. Lebedev, AA; Davydov, DV; Tregubova, AS; Bogdanova, EV; Shcheglov, MP; Pavlenko, MV
    Effect of structural imperfection on the spectrum of deep levels in 6H-SiC
    SEMICONDUCTORS
    
    A.A. Lebedev et al., "Effect of structural imperfection on the spectrum of deep levels in 6H-SiC", SEMICONDUCT, 35(12), 2001, pp. 1372-1374
80. Gorban', IS; Krokhmal', AP
    The impurity optical absorption and conduction band structure in 6H-SiC
    SEMICONDUCTORS
    
    I.S. Gorban' e A.P. Krokhmal', "The impurity optical absorption and conduction band structure in 6H-SiC", SEMICONDUCT, 35(11), 2001, pp. 1242-1248
81. Zelenin, VV; Korogodskii, ML; Lebedev, AA
    Some aspects of SiC CVD epitaxy
    SEMICONDUCTORS
    
    V.V. Zelenin et al., "Some aspects of SiC CVD epitaxy", SEMICONDUCT, 35(10), 2001, pp. 1117-1119
82. Bolotina, NB; Dyuzheva, TI; Bendeliani, NA
    Atomic structure of boron suboxycarbide B(C,O)(0.155)
    CRYSTALLOGRAPHY REPORTS
    
    N.B. Bolotina et al., "Atomic structure of boron suboxycarbide B(C,O)(0.155)", CRYSTALLO R, 46(5), 2001, pp. 734-740
83. Savarimuthu, AC; Taber, HF; Megat, I; Shadley, JR; Rybicki, EF; Cornell, WC; Emery, WA; Somerville, DA; Nuse, JD
    Sliding wear behavior of tungsten carbide thermal spray coatings for replacement of chromium electroplate in aircraft applications
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    A.C. Savarimuthu et al., "Sliding wear behavior of tungsten carbide thermal spray coatings for replacement of chromium electroplate in aircraft applications", J THERM SPR, 10(3), 2001, pp. 502-510
84. Berger, LM; Ettmayer, P; Vuoristo, P; Mantyla, T; Kunert, W
    Microstructure and properties of WC-10%Co-4% Cr spray powders and coatings: Part 1. Powder characterization
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    L.M. Berger et al., "Microstructure and properties of WC-10%Co-4% Cr spray powders and coatings: Part 1. Powder characterization", J THERM SPR, 10(2), 2001, pp. 311-325
85. Hsieh, RI; Liou, HY; Pan, YT
    Effects of cooling time and alloying elements on the microstructure of thegleeble-simulated heat-affected zone of 22% Cr duplex stainless steels
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    R.I. Hsieh et al., "Effects of cooling time and alloying elements on the microstructure of thegleeble-simulated heat-affected zone of 22% Cr duplex stainless steels", J MAT ENG P, 10(5), 2001, pp. 526-536
86. Hu, Z; Wu, X; Li, X; Wang, C
    Study on the precipitation of M2C in high Co-Ni alloy steel
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    Z. Hu et al., "Study on the precipitation of M2C in high Co-Ni alloy steel", J MAT ENG P, 10(4), 2001, pp. 493-495
87. Diebel, JR; Sridharan, K; Bull, SJ
    Evaluation of four commercially produced surface treatments
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    J.R. Diebel et al., "Evaluation of four commercially produced surface treatments", J MAT ENG P, 10(3), 2001, pp. 263-269
88. de la Garza, Z; Herrera-Trejo, M; Castro, M; Ramirez, E; Mendez, M; Mendez, J
    Effect of Zr additions on mechanical properties of an ASTM f-75 alloy
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    Z. de la Garza et al., "Effect of Zr additions on mechanical properties of an ASTM f-75 alloy", J MAT ENG P, 10(2), 2001, pp. 153-156
89. Tanaka, S; Sugimoto, S; Li, JF; Watanabe, R; Esashi, M
    Silicon carbide micro-reaction-sintering using micromachined silicon molds
    JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
    
    S. Tanaka et al., "Silicon carbide micro-reaction-sintering using micromachined silicon molds", J MICROEL S, 10(1), 2001, pp. 55-61
90. Rohatgi, P; Asthana, R
    Solidification science in cast MMCs: The influence of Merton Flemings
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    
    P. Rohatgi e R. Asthana, "Solidification science in cast MMCs: The influence of Merton Flemings", JOM-J MIN, 53(9), 2001, pp. 9-13
91. Hetzner, DW
    Refining carbide size distributions in M1 high speed steel by processing and alloying
    MATERIALS CHARACTERIZATION
    
    D.W. Hetzner, "Refining carbide size distributions in M1 high speed steel by processing and alloying", MATER CHAR, 46(2-3), 2001, pp. 175-182
92. Matula, M; Hyspecka, L; Svoboda, M; Vodarek, V; Dagbert, C; Galland, J; Stonawska, Z; Tuma, L
    Intergranular corrosion of AISI 316L steel
    MATERIALS CHARACTERIZATION
    
    M. Matula et al., "Intergranular corrosion of AISI 316L steel", MATER CHAR, 46(2-3), 2001, pp. 203-210
93. Sengupta, DK; Quick, NR; Kar, A
    Laser conversion of electrical properties for silicon carbide device applications
    JOURNAL OF LASER APPLICATIONS
    
    D.K. Sengupta et al., "Laser conversion of electrical properties for silicon carbide device applications", J LASER APP, 13(1), 2001, pp. 26-31
94. Adams, RD; Captain, B; Fu, W
    New mixed metal cluster complexes containing platinum. The synthesis and structural characterizations of PtFe4(CO)(12)(COD)(mu(5)-C) and PtFe4(CO)(12)(PMe2Ph)(2)(mu(5)-C)
    JOURNAL OF CLUSTER SCIENCE
    
    R.D. Adams et al., "New mixed metal cluster complexes containing platinum. The synthesis and structural characterizations of PtFe4(CO)(12)(COD)(mu(5)-C) and PtFe4(CO)(12)(PMe2Ph)(2)(mu(5)-C)", J CLUST SCI, 12(1), 2001, pp. 303-312
95. Mlynek, PD; Kawano, M; Kozee, MA; Dahl, LF
    First-known high-nuclearity copper-nickel carbonyl cluster: [CuxNi35-x(CO)(40)](5-) (with x= 3 or 5) containing an unprecedented 35-atom three-layer hcp triangular stacking metal-core geometry
    JOURNAL OF CLUSTER SCIENCE
    
    P.D. Mlynek et al., "First-known high-nuclearity copper-nickel carbonyl cluster: [CuxNi35-x(CO)(40)](5-) (with x= 3 or 5) containing an unprecedented 35-atom three-layer hcp triangular stacking metal-core geometry", J CLUST SCI, 12(1), 2001, pp. 313-338
96. Ezugwu, EO; Okeke, CI
    Threading of inclusion modified steels with coated carbide tools
    PRECISION MACHINING OF ADVANCED MATERIALS
    
    E.O. Ezugwu e C.I. Okeke, "Threading of inclusion modified steels with coated carbide tools", KEY ENG MAT, 196, 2001, pp. 177-192
97. Da Costa, P; Potvin, C; Manoli, JM; Breysse, M; Djega-Mariadassou, G
    Novel phosphorus-doped alumina-supported molybdenum and tungsten carbides:synthesis, characterization and hydrogenation properties
    CATALYSIS LETTERS
    
    P. Da Costa et al., "Novel phosphorus-doped alumina-supported molybdenum and tungsten carbides:synthesis, characterization and hydrogenation properties", CATAL LETT, 72(1-2), 2001, pp. 91-97
98. Du, YL; Li, K; Wu, BM; Lee, T; Kim, Y
    FT-IR photoacoustic spectroscopy of porous SiC layer
    PROGRESS IN NATURAL SCIENCE
    
    Y.L. Du et al., "FT-IR photoacoustic spectroscopy of porous SiC layer", PROG NAT SC, 11, 2001, pp. S205-S209
99. Yan, Y; Huang, FM; Zhang, SL; Zhu, BF; Shang, EY; Fan, SS
    Raman spectra of SiC nanorods with different excitation wavelengths
    CHINESE SCIENCE BULLETIN
    
    Y. Yan et al., "Raman spectra of SiC nanorods with different excitation wavelengths", CHIN SCI B, 46(22), 2001, pp. 1865-1866
100. Zheng, XH; Qu, B; Wang, YT; Dai, ZZ; Yang, H; Liang, JW
     Microtwins and twin inclusions in the 3C-SiC epilayers grown on Si(001) byAPCVD
     SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY
     
     X.H. Zheng et al., "Microtwins and twin inclusions in the 3C-SiC epilayers grown on Si(001) byAPCVD", SCI CHINA A, 44(6), 2001, pp. 777-782