Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Masahashi, N; Hanada, S; Mizuhara, Y
   Diffusion bonding associated with phase transformation in (gamma+beta) micro-duplex titanium aluminides
   MATERIALS TRANSACTIONS
   
   N. Masahashi et al., "Diffusion bonding associated with phase transformation in (gamma+beta) micro-duplex titanium aluminides", MATER TRANS, 42(6), 2001, pp. 1028-1034
2. Gurnagul, N; Ju, S; Page, DH
   Fibre-fibre bond strength of once-dried pulps
   JOURNAL OF PULP AND PAPER SCIENCE
   
   N. Gurnagul et al., "Fibre-fibre bond strength of once-dried pulps", J PULP PAP, 27(3), 2001, pp. 88-91
3. Gates, DJ; Westcott, M
   On the work to pull out fibres via bond breakage during paper tearing
   JOURNAL OF PULP AND PAPER SCIENCE
   
   D.J. Gates e M. Westcott, "On the work to pull out fibres via bond breakage during paper tearing", J PULP PAP, 27(11), 2001, pp. 369-372
4. Hiraga, H; Inoue, T; Matsunawa, A; Shimura, H
   Effect of laser irradiation condition on bonding strength in laser plasma hybrid spraying
   SURFACE & COATINGS TECHNOLOGY
   
   H. Hiraga et al., "Effect of laser irradiation condition on bonding strength in laser plasma hybrid spraying", SURF COAT, 138(2-3), 2001, pp. 284-290
5. Yang, YC; Chang, E
   Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti-6Al-4V substrate
   BIOMATERIALS
   
   Y.C. Yang e E. Chang, "Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti-6Al-4V substrate", BIOMATERIAL, 22(13), 2001, pp. 1827-1836
6. Xu, HHK; Quinn, JB
   Whisker-reinforced bioactive composites containing calcium phosphate cement fillers: Effects of filler ratio and surface treatments on mechanical properties
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   H.H.K. Xu e J.B. Quinn, "Whisker-reinforced bioactive composites containing calcium phosphate cement fillers: Effects of filler ratio and surface treatments on mechanical properties", J BIOMED MR, 57(2), 2001, pp. 165-174
7. Okada, Y; Kobayashi, M; Neo, M; Kokubo, T; Nakamura, T
   Ultrastructure of the interface between bioactive composite and bone: Comparison of apatite and wollastonite containing glass-ceramic filler with hydroxyapatite and beta-tricalcium phosphate fillers
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   Y. Okada et al., "Ultrastructure of the interface between bioactive composite and bone: Comparison of apatite and wollastonite containing glass-ceramic filler with hydroxyapatite and beta-tricalcium phosphate fillers", J BIOMED MR, 57(1), 2001, pp. 101-107
8. Kettunen, J; Makela, A; Miettinen, H; Nevalainen, T; Pohjonen, T; Suokas, E; Rokkanen, P
   The fixation properties of carbon fiber-reinforced liquid crystalline polymer implant in bone: An experimental study in rabbits
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   J. Kettunen et al., "The fixation properties of carbon fiber-reinforced liquid crystalline polymer implant in bone: An experimental study in rabbits", J BIOMED MR, 56(1), 2001, pp. 137-143
9. Nishio, K; Neo, M; Akiyama, H; Okada, Y; Kokubo, T; Nakamura, T
   Effects of apatite and wollastonite containing glass-ceramic powder and two types of alumina powder in composites on osteoblastic differentiation of bone marrow cells
   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
   
   K. Nishio et al., "Effects of apatite and wollastonite containing glass-ceramic powder and two types of alumina powder in composites on osteoblastic differentiation of bone marrow cells", J BIOMED MR, 55(2), 2001, pp. 164-176
10. Shinzato, S; Nakamura, T; Kokuba, T; Kitamura, N
    A new bioactive bone cement: Effect of glass bead filler content on mechanical and biological properties
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    S. Shinzato et al., "A new bioactive bone cement: Effect of glass bead filler content on mechanical and biological properties", J BIOMED MR, 54(4), 2001, pp. 491-500
11. Zheng, XB; Ding, CX
    Characterization of plasma-sprayed hydroxyapatite/TiO2 composite coatings
    JOURNAL OF THERMAL SPRAY TECHNOLOGY
    
    X.B. Zheng e C.X. Ding, "Characterization of plasma-sprayed hydroxyapatite/TiO2 composite coatings", J THERM SPR, 9(4), 2000, pp. 520-525
12. Kim, JH; Ji, BK; Joo, J; Yang, CW; Nah, W
    Superconducting joint between Bi-Pb-Sr-Ca-Cu-O superconductor tapes
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
    
    J.H. Kim et al., "Superconducting joint between Bi-Pb-Sr-Ca-Cu-O superconductor tapes", IEEE APPL S, 10(1), 2000, pp. 1182-1185
13. Laurence, C; Berthelot, M
    Observations on the strength of hydrogen bonding
    PERSPECTIVES IN DRUG DISCOVERY AND DESIGN
    
    C. Laurence e M. Berthelot, "Observations on the strength of hydrogen bonding", PERSP DR D, 18, 2000, pp. 39-60
14. Lee, IS; Kim, HE; Kim, SY
    Studies on calcium phosphate coatings
    SURFACE & COATINGS TECHNOLOGY
    
    I.S. Lee et al., "Studies on calcium phosphate coatings", SURF COAT, 131(1-3), 2000, pp. 181-186
15. Low, DKY; Li, L; Corfe, AG
    Effects of assist gas on the physical characteristics of spatter during laser percussion drilling of NIMONIC 263 alloy
    APPLIED SURFACE SCIENCE
    
    D.K.Y. Low et al., "Effects of assist gas on the physical characteristics of spatter during laser percussion drilling of NIMONIC 263 alloy", APPL SURF S, 154, 2000, pp. 689-695
16. Aluko, OB; Koolen, AJ
    The essential mechanics of capillary crumbling of structured agricultural soils
    SOIL & TILLAGE RESEARCH
    
    O.B. Aluko e A.J. Koolen, "The essential mechanics of capillary crumbling of structured agricultural soils", SOIL TILL R, 55(3-4), 2000, pp. 117-126
17. Zheng, XB; Huang, MH; Ding, CX
    Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings
    BIOMATERIALS
    
    X.B. Zheng et al., "Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings", BIOMATERIAL, 21(8), 2000, pp. 841-849
18. Shinzato, S; Kobayashi, M; Mousa, WF; Kamimura, M; Neo, M; Choju, K; Kokubo, T; Nakamura, T
    Bioactive bone cement: Effect of surface curing properties on bone-bondingstrength
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    S. Shinzato et al., "Bioactive bone cement: Effect of surface curing properties on bone-bondingstrength", J BIOMED MR, 53(1), 2000, pp. 51-61
19. Shinzato, S; Kobayashi, M; Mousa, WF; Kamimura, M; Neo, M; Kitamura, Y; Kokubo, T; Nakamura, T
    Bioactive polymethyl methacrylate-based bone cement: Comparison of glass beads, apatite- and wollastonite-containing glass-ceramic, and hydroxyapatite fillers on mechanical and biological properties
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    S. Shinzato et al., "Bioactive polymethyl methacrylate-based bone cement: Comparison of glass beads, apatite- and wollastonite-containing glass-ceramic, and hydroxyapatite fillers on mechanical and biological properties", J BIOMED MR, 51(2), 2000, pp. 258-272
20. Fujita, H; Ido, K; Matsuda, Y; Lida, H; Oka, M; Kitamura, Y; Nakamura, T
    Evaluation of bioactive bone cement in canine total hip arthroplasty
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    H. Fujita et al., "Evaluation of bioactive bone cement in canine total hip arthroplasty", J BIOMED MR, 49(2), 2000, pp. 273-288
21. Okada, Y; Kobayashi, M; Neo, M; Shinzato, S; Matsushita, M; Kokubo, T; Nakamura, T
    Ultrastructure of the interface between alumina bead composite and bone
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    Y. Okada et al., "Ultrastructure of the interface between alumina bead composite and bone", J BIOMED MR, 49(1), 2000, pp. 106-111
22. Greenspan, DC
    Bioactive ceramic implant materials
    CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
    
    D.C. Greenspan, "Bioactive ceramic implant materials", CURR OP SOL, 4(4), 1999, pp. 389-393
23. Go, JS; Cho, YH
    Experimental evaluation of anodic bonding process based on the Taguchi analysis of interfacial fracture toughness
    SENSORS AND ACTUATORS A-PHYSICAL
    
    J.S. Go e Y.H. Cho, "Experimental evaluation of anodic bonding process based on the Taguchi analysis of interfacial fracture toughness", SENS ACTU-A, 73(1-2), 1999, pp. 52-57
24. Date, H; Kobayakawa, S; Naka, M
    Microstructure and bonding strength of impact-welded aluminium stainless steel joints
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    H. Date et al., "Microstructure and bonding strength of impact-welded aluminium stainless steel joints", J MATER PR, 85(1-3), 1999, pp. 166-170
25. Draper, SL; Aikin, BJM
    Effect of composite fabrication on the strength of single crystal Al2O3 fibers in two Fe-base alloy composites
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    S.L. Draper e B.J.M. Aikin, "Effect of composite fabrication on the strength of single crystal Al2O3 fibers in two Fe-base alloy composites", MAT SCI E A, 266(1-2), 1999, pp. 18-29
26. Miyata, N; Matsuura, W; Kokubo, T; Nakamura, T
    Mechanical behavior of bioactive inorganic filler-resin composite cements in a simulated body fluid: Effect of filler material
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
    
    N. Miyata et al., "Mechanical behavior of bioactive inorganic filler-resin composite cements in a simulated body fluid: Effect of filler material", J CERAM S J, 107(10), 1999, pp. 935-943
27. Detwiler, RJ; Whiting, DA; Lagergren, ES
    Statistical approach to ingress of chloride ions in silica fume concrete for bridge decks
    ACI MATERIALS JOURNAL
    
    R.J. Detwiler et al., "Statistical approach to ingress of chloride ions in silica fume concrete for bridge decks", ACI MATER J, 96(6), 1999, pp. 670-675
28. Hakuto, S; Park, R; Tanaka, H
    Effect of deterioration of bond of beam bars passing through interior beam-column joints on flexural strength and ductility
    ACI STRUCTURAL JOURNAL
    
    S. Hakuto et al., "Effect of deterioration of bond of beam bars passing through interior beam-column joints on flexural strength and ductility", ACI STRUC J, 96(5), 1999, pp. 858-864
29. Hlavac, J
    Ceramic coatings on titanium for bone implants
    CERAMICS-SILIKATY
    
    J. Hlavac, "Ceramic coatings on titanium for bone implants", CERAM-SILIK, 43(3), 1999, pp. 133-139
30. Koper, GJM; Vanerek, A; Van de Ven, TGM
    Poly(propylene imine) dendrimers as retention aid for the deposition of calcium carbonate on pulp fibres
    JOURNAL OF PULP AND PAPER SCIENCE
    
    G.J.M. Koper et al., "Poly(propylene imine) dendrimers as retention aid for the deposition of calcium carbonate on pulp fibres", J PULP PAP, 25(3), 1999, pp. 81-83
31. Yu, Y; Kettunen, H; Niskanen, K
    Can viscose fibres reinforce paper?
    JOURNAL OF PULP AND PAPER SCIENCE
    
    Y. Yu et al., "Can viscose fibres reinforce paper?", J PULP PAP, 25(11), 1999, pp. 398-402
32. Kiiskinen, H; Juppi, K; Timofeev, O; Karlsson, MA; Edelmann, K
    Impingement drying of multi-ply linerboard
    PULP & PAPER-CANADA
    
    H. Kiiskinen et al., "Impingement drying of multi-ply linerboard", PULP PAPER, 100(1), 1999, pp. 43-45
33. Zhu, XD; Huang, H; Xu, KW; He, JW
    Influence of the interface preparation on properties of PECVD TiN
    SURFACE & COATINGS TECHNOLOGY
    
    X.D. Zhu et al., "Influence of the interface preparation on properties of PECVD TiN", SURF COAT, 119, 1999, pp. 1029-1032
34. Kobayashi, M; Nakamura, T; Tamura, J; Kikutani, T; Nishiguchi, S; Mousa, WF; Takahashi, M; Kokubo, T
    Osteoconductivity and bone-bonding strength of high- and low-viscous bioactive bone cements
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    M. Kobayashi et al., "Osteoconductivity and bone-bonding strength of high- and low-viscous bioactive bone cements", J BIOMED MR, 48(3), 1999, pp. 265-276
35. Okada, Y; Kawanabe, K; Fujita, H; Nishio, K; Nakamura, T
    Repair of segmental bone defects using bioactive bone cement: Comparison with PMMA bone cement
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    Y. Okada et al., "Repair of segmental bone defects using bioactive bone cement: Comparison with PMMA bone cement", J BIOMED MR, 47(3), 1999, pp. 353-359
36. Yasunaga, T; Matsusue, Y; Furukawa, T; Shikinami, Y; Okuno, M; Nakamura, T
    Bonding behavior of ultrahigh strength unsintered hydroxyapatite particles/poly(L-lactide) composites to surface of tibial cortex in rabbits
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    T. Yasunaga et al., "Bonding behavior of ultrahigh strength unsintered hydroxyapatite particles/poly(L-lactide) composites to surface of tibial cortex in rabbits", J BIOMED MR, 47(3), 1999, pp. 412-419
37. Sung, HW; Huang, DM; Chang, WH; Huang, RN; Hsu, JC
    Evaluation of gelatin hydrogel crosslinked with various crosslinking agents as bioadhesives: In vitro study
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    H.W. Sung et al., "Evaluation of gelatin hydrogel crosslinked with various crosslinking agents as bioadhesives: In vitro study", J BIOMED MR, 46(4), 1999, pp. 520-530
38. Shinzato, S; Kobayashi, M; Choju, K; Kokubo, T; Nakamura, T
    Bone-bonding behavior of alumina bead composite
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    S. Shinzato et al., "Bone-bonding behavior of alumina bead composite", J BIOMED MR, 46(2), 1999, pp. 287-300
39. Okada, Y; Kobayashi, M; Fujita, H; Katsura, Y; Matsuoka, H; Takadama, H; Kokubo, T; Nakamura, T
    Transmission electron microscopic study of interface between bioactive bone cement and bone: Comparison of apatite and wollastonite containing glass-ceramic filler with hydroxyapatite and beta-tricalcium phosphate fillers
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    Y. Okada et al., "Transmission electron microscopic study of interface between bioactive bone cement and bone: Comparison of apatite and wollastonite containing glass-ceramic filler with hydroxyapatite and beta-tricalcium phosphate fillers", J BIOMED MR, 45(4), 1999, pp. 277-284
40. Matsuda, S; Iwata, H; Se, N; Ikada, Y
    Bioadhesion of gelatin films crosslinked with glutaraldehyde
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    S. Matsuda et al., "Bioadhesion of gelatin films crosslinked with glutaraldehyde", J BIOMED MR, 45(1), 1999, pp. 20-27
41. Wang, SY; Rao, YC
    Structural performance of fire-retardant treated plywood: Effect of elevated temperature
    HOLZFORSCHUNG
    
    S.Y. Wang e Y.C. Rao, "Structural performance of fire-retardant treated plywood: Effect of elevated temperature", HOLZFORSCH, 53(5), 1999, pp. 547-552
42. YOUNG CD; DUH JG
    BONDING MECHANISM OF ELECTROLESS NI-P FILM WITH ALN SUBSTRATE AND CU FOIL
    IEEE transactions on components, packaging, and manufacturing technology. Part A
    
    C.D. Young e J.G. Duh, "BONDING MECHANISM OF ELECTROLESS NI-P FILM WITH ALN SUBSTRATE AND CU FOIL", IEEE transactions on components, packaging, and manufacturing technology. Part A, 21(2), 1998, pp. 330-344
43. PATSI ME; HAUTANIEMI JA; RAHIALA HM; PELTOLA TO; KANGASNIEMI IMO
    BONDING STRENGTHS OF TITANIA SOL-GEL DERIVED COATINGS ON TITANIUM
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
    
    M.E. Patsi et al., "BONDING STRENGTHS OF TITANIA SOL-GEL DERIVED COATINGS ON TITANIUM", JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 11(1), 1998, pp. 55-66
44. FU YQ; ZHU XD; XU KW; HE JW
    MECHANICAL AND TRIBOLOGICAL PROPERTIES OF ION-BEAM-ENHANCED-DEPOSITION TIN THIN-FILMS
    Journal of materials processing technology
    
    Y.Q. Fu et al., "MECHANICAL AND TRIBOLOGICAL PROPERTIES OF ION-BEAM-ENHANCED-DEPOSITION TIN THIN-FILMS", Journal of materials processing technology, 83(1-3), 1998, pp. 209-216
45. GROSECLOSE CH; DRAUGHN RA; TYOR WR; SALLEE FR; MIDDAUGH LD
    LONG-TERM INTRACRANIAL CANNULA STABILIZATION IN MICE WITH LIGHT-CUREDRESIN COMPOSITES
    Journal of neuroscience methods
    
    C.H. Groseclose et al., "LONG-TERM INTRACRANIAL CANNULA STABILIZATION IN MICE WITH LIGHT-CUREDRESIN COMPOSITES", Journal of neuroscience methods, 79(1), 1998, pp. 31-36
46. WU HD; MA CCM; CHU PP; TSENG HT; LEE CT
    THE PHASE-BEHAVIOR OF NOVOLAC TYPE PHENOLIC RESIN BLENDED WITH POLY(ADIPIC ESTER)
    Polymer
    
    H.D. Wu et al., "THE PHASE-BEHAVIOR OF NOVOLAC TYPE PHENOLIC RESIN BLENDED WITH POLY(ADIPIC ESTER)", Polymer, 39(13), 1998, pp. 2859-2865
47. KOBAYASHI M; NAKAMURA T; OKADA Y; FUKUMOTO A; FURUKAWA T; KATO H; KOKUBO T; KIKUTANI T
    BIOACTIVE BONE-CEMENT - COMPARISON OF APATITE AND WOLLASTONITE CONTAINING GLASS-CERAMIC, HYDROXYAPATITE, AND BETA-TRICALCIUM PHOSPHATE FILLERS ON BONE-BONDING STRENGTH
    Journal of biomedical materials research
    
    M. Kobayashi et al., "BIOACTIVE BONE-CEMENT - COMPARISON OF APATITE AND WOLLASTONITE CONTAINING GLASS-CERAMIC, HYDROXYAPATITE, AND BETA-TRICALCIUM PHOSPHATE FILLERS ON BONE-BONDING STRENGTH", Journal of biomedical materials research, 42(2), 1998, pp. 223-237
48. OIKAWA H; SAITOH T; YOSHIMURA T; KIRIYAMA T
    MICROSTRUCTURE AT INTERFACE OF STEEL ALUM INUM BONDING SHEET AND FORMATION OF INTERMETALLIC COMPOUND/
    Tetsu to hagane
    
    H. Oikawa et al., "MICROSTRUCTURE AT INTERFACE OF STEEL ALUM INUM BONDING SHEET AND FORMATION OF INTERMETALLIC COMPOUND/", Tetsu to hagane, 84(1), 1998, pp. 73-78
49. BARZYK D; PAGE DH; RAGAUSKAS A
    ACIDIC GROUP TOPOCHEMISTRY AND FIBER-TO-FIBER SPECIFIC BOND STRENGTH
    Journal of pulp and paper science
    
    D. Barzyk et al., "ACIDIC GROUP TOPOCHEMISTRY AND FIBER-TO-FIBER SPECIFIC BOND STRENGTH", Journal of pulp and paper science, 23(2), 1997, pp. 59-61
50. ALBRECHT SW
    STUDY OF CORRUGATED LINER PAPER AND BONDABILITY BY HOT-MELT ADHESIVES
    Tappi journal
    
    S.W. Albrecht, "STUDY OF CORRUGATED LINER PAPER AND BONDABILITY BY HOT-MELT ADHESIVES", Tappi journal, 80(9), 1997, pp. 190-192
51. WIGDORSKI RM; BATORSKI TM
    IMPROVED EXTRUDABLE HOT-MELT MELT ADHESIVE FOR LIDDING
    Tappi journal
    
    R.M. Wigdorski e T.M. Batorski, "IMPROVED EXTRUDABLE HOT-MELT MELT ADHESIVE FOR LIDDING", Tappi journal, 80(8), 1997, pp. 145-147
52. STAUFFER DC; LIEDERMOOY I
    NEW DEVELOPMENTS IN CASE AND CARTON SEALING HOT-MELT ADHESIVE TECHNOLOGY
    Tappi journal
    
    D.C. Stauffer e I. Liedermooy, "NEW DEVELOPMENTS IN CASE AND CARTON SEALING HOT-MELT ADHESIVE TECHNOLOGY", Tappi journal, 80(7), 1997, pp. 146-150
53. HEUCHER R; BUTTERBACH R
    HIGH-PERFORMANCE HOT MELTS FOR BONDING POLAR AND NONPOLAR SUBSTRATES
    Tappi journal
    
    R. Heucher e R. Butterbach, "HIGH-PERFORMANCE HOT MELTS FOR BONDING POLAR AND NONPOLAR SUBSTRATES", Tappi journal, 80(6), 1997, pp. 213-218
54. HE JW; XU KW; HU NS
    EVALUATION OF BONDING STRENGTH OF THIN HARD FILMS BY SPHERICAL ROLLING TEST
    Surface & coatings technology
    
    J.W. He et al., "EVALUATION OF BONDING STRENGTH OF THIN HARD FILMS BY SPHERICAL ROLLING TEST", Surface & coatings technology, 97(1-3), 1997, pp. 295-298
55. SHIM MJ; KIM SW
    CHARACTERISTICS OF POLYMER WELDING BY HEALING-PROCESS
    Materials chemistry and physics
    
    M.J. Shim e S.W. Kim, "CHARACTERISTICS OF POLYMER WELDING BY HEALING-PROCESS", Materials chemistry and physics, 48(1), 1997, pp. 90-93
56. ZHAO ZY; ZHANG WL
    INFLUENCE OF WORKMANSHIP ON THE BONDING STRENGTH OF TILES TO EXTERNALWALLS
    International journal of adhesion and adhesives
    
    Z.Y. Zhao e W.L. Zhang, "INFLUENCE OF WORKMANSHIP ON THE BONDING STRENGTH OF TILES TO EXTERNALWALLS", International journal of adhesion and adhesives, 17(1), 1997, pp. 47-53
57. KIM HM; MIYAJI F; KOKUBO T; NAKAMURA T
    BONDING STRENGTH OF BONELIKE APATITE LAYER TO TI METAL-SUBSTRATE
    Journal of biomedical materials research
    
    H.M. Kim et al., "BONDING STRENGTH OF BONELIKE APATITE LAYER TO TI METAL-SUBSTRATE", Journal of biomedical materials research, 38(2), 1997, pp. 121-127
58. YANG CY; LIN RM; WANG BC; LEE TM; CHANG E; HANG YS; CHEN PQ
    IN-VITRO AND IN-VIVO MECHANICAL EVALUATIONS OF PLASMA-SPRAYED HYDROXYAPATITE COATINGS ON TITANIUM IMPLANTS - THE EFFECT OF COATING CHARACTERISTICS
    Journal of biomedical materials research
    
    C.Y. Yang et al., "IN-VITRO AND IN-VIVO MECHANICAL EVALUATIONS OF PLASMA-SPRAYED HYDROXYAPATITE COATINGS ON TITANIUM IMPLANTS - THE EFFECT OF COATING CHARACTERISTICS", Journal of biomedical materials research, 37(3), 1997, pp. 335-345
59. FENG JC; NAKA M; SCHUSTER JC
    LAYER STRUCTURE AND FRACTURE STRENGTH OF SIC CR JOINT/
    Nippon Kinzoku Gakkaishi
    
    J.C. Feng et al., "LAYER STRUCTURE AND FRACTURE STRENGTH OF SIC CR JOINT/", Nippon Kinzoku Gakkaishi, 61(7), 1997, pp. 636-642
60. FENG J; NAKA M; SCHUSTER JC
    INTERFACIAL REACTION AND STRENGTH OF SIC TA/SIC JOINT/
    Nippon Kinzoku Gakkaishi
    
    J. Feng et al., "INTERFACIAL REACTION AND STRENGTH OF SIC TA/SIC JOINT/", Nippon Kinzoku Gakkaishi, 61(5), 1997, pp. 456-461
61. CHIBA A; NISHIDA M; MORIZONO Y; IMAMURA K
    DIFFUSION BARRIER EFFECT OF TIC LAYER FOR MED AT THE BONDING INTERFACE AND BONDING CHARACTERISTICS OF AN EXPLOSIVELY WELDED TI SUS420J1 STAINLESS-STEEL CLAD BY HEAT-TREATMENT/
    Tetsu to hagane
    
    A. Chiba et al., "DIFFUSION BARRIER EFFECT OF TIC LAYER FOR MED AT THE BONDING INTERFACE AND BONDING CHARACTERISTICS OF AN EXPLOSIVELY WELDED TI SUS420J1 STAINLESS-STEEL CLAD BY HEAT-TREATMENT/", Tetsu to hagane, 83(11), 1997, pp. 736-741
62. OIKAWA H; SAITOH T; YOSHIMURA T; NAGASE T
    EFFECT OF OXIDE FILM ON SOLID-PHASE BONDING OF ALUMINUM SHEET TO STEEL SHEET
    Tetsu to hagane
    
    H. Oikawa et al., "EFFECT OF OXIDE FILM ON SOLID-PHASE BONDING OF ALUMINUM SHEET TO STEEL SHEET", Tetsu to hagane, 83(10), 1997, pp. 629-634
63. OIKAWA H; SAITOH T; NAGASE T; KIRIYAMA T
    FORMATION AND GROWTH OF INTERMETALLIC COMPOUND AT INTERFACE OF STEEL ALUMINUM BONDING SHEET/
    Tetsu to hagane
    
    H. Oikawa et al., "FORMATION AND GROWTH OF INTERMETALLIC COMPOUND AT INTERFACE OF STEEL ALUMINUM BONDING SHEET/", Tetsu to hagane, 83(10), 1997, pp. 641-646
64. KAWAHARA Y; KIRA M
    CORROSION PREVENTION OF WATERWALL TUBE BY FIELD METAL SPRAYING IN MUNICIPAL WASTE INCINERATION PLANTS
    Corrosion
    
    Y. Kawahara e M. Kira, "CORROSION PREVENTION OF WATERWALL TUBE BY FIELD METAL SPRAYING IN MUNICIPAL WASTE INCINERATION PLANTS", Corrosion, 53(3), 1997, pp. 241-251
65. ONUKI J; KOIZUMI M; ISHIKAWA I
    EFFECTS OF FREQUENCY AND SURFACE CLEANLINESS OF AL-SI ELECTRODE ON ULTRASONIC BONDING CHARACTERISTICS OF THICK AL WIRE BONDING
    Materials transactions, JIM
    
    J. Onuki et al., "EFFECTS OF FREQUENCY AND SURFACE CLEANLINESS OF AL-SI ELECTRODE ON ULTRASONIC BONDING CHARACTERISTICS OF THICK AL WIRE BONDING", Materials transactions, JIM, 37(9), 1996, pp. 1492-1496
66. YAMAMOTO T; TAKASHIMA T; SATO K
    SOLID-STATE BONDING OF SILICON-NITRIDE CE RAMICS TO METAL USING NICKEL-CHROMIUM ALLOY
    Nippon Seramikkusu Kyokai gakujutsu ronbunshi
    
    T. Yamamoto et al., "SOLID-STATE BONDING OF SILICON-NITRIDE CE RAMICS TO METAL USING NICKEL-CHROMIUM ALLOY", Nippon Seramikkusu Kyokai gakujutsu ronbunshi, 104(6), 1996, pp. 535-539
67. NISKANEN KJ; KARENLAMPI P; ALAVA MJ
    STOCHASTIC-ANALYSIS OF PAPER TOUGHNESS
    Journal of pulp and paper science
    
    K.J. Niskanen et al., "STOCHASTIC-ANALYSIS OF PAPER TOUGHNESS", Journal of pulp and paper science, 22(10), 1996, pp. 392-397
68. KOHL WS; FREI J; TRETHEWEY BR
    CHARACTERIZATION OF THE CURE PROCESS IN MELAMINE-FORMALDEHYDE LAMINATING RESINS USING HIGH-PRESSURE DIFFERENTIAL SCANNING CALORIMETRY
    Tappi journal
    
    W.S. Kohl et al., "CHARACTERIZATION OF THE CURE PROCESS IN MELAMINE-FORMALDEHYDE LAMINATING RESINS USING HIGH-PRESSURE DIFFERENTIAL SCANNING CALORIMETRY", Tappi journal, 79(9), 1996, pp. 199-205
69. SETH RS; PAGE DH
    THE PROBLEM OF USING PAGES EQUATION TO DETERMINE LOSS IN SHEAR-STRENGTH OF FIBER-FIBER BONDS UPON PULP DRYING
    Tappi journal
    
    R.S. Seth e D.H. Page, "THE PROBLEM OF USING PAGES EQUATION TO DETERMINE LOSS IN SHEAR-STRENGTH OF FIBER-FIBER BONDS UPON PULP DRYING", Tappi journal, 79(9), 1996, pp. 206-210
70. RUIZ FA
    IMPROVING LDPE COATING-TO-SUBSTRATE ADHESION WITH CALCIUM-CARBONATE ADDITION
    Tappi journal
    
    F.A. Ruiz, "IMPROVING LDPE COATING-TO-SUBSTRATE ADHESION WITH CALCIUM-CARBONATE ADDITION", Tappi journal, 79(5), 1996, pp. 139-142
71. KARENLAMPI PP
    THE EFFECT OF PULP FIBER PROPERTIES ON THE TEARING WORK OF PAPER
    Tappi journal
    
    P.P. Karenlampi, "THE EFFECT OF PULP FIBER PROPERTIES ON THE TEARING WORK OF PAPER", Tappi journal, 79(4), 1996, pp. 211-216
72. SOPKOVA A; MONDIK P; REHAKOVA M
    COMBINATIONS OF NATURAL AND SYNTHETIC INCLUSION-COMPOUNDS AND THEIR THERMAL-STABILITY
    Journal of thermal analysis
    
    A. Sopkova et al., "COMBINATIONS OF NATURAL AND SYNTHETIC INCLUSION-COMPOUNDS AND THEIR THERMAL-STABILITY", Journal of thermal analysis, 47(2), 1996, pp. 365-378
73. KEMPPI A
    STUDIES ON ADHESION BETWEEN PAPER AND LOW-DENSITY POLYETHYLENE .1. INFLUENCE OF THE NATURAL COMPONENTS IN PAPER
    Paperi ja puu
    
    A. Kemppi, "STUDIES ON ADHESION BETWEEN PAPER AND LOW-DENSITY POLYETHYLENE .1. INFLUENCE OF THE NATURAL COMPONENTS IN PAPER", Paperi ja puu, 78(10), 1996, pp. 610-617
74. OCHIAI S; HOJO M
    REDUCTION IN ENERGY-RELEASE RATE FOR MODE-I FRACTURE OF A FIBER WITH A CRACKED COATING LAYER DUE TO SMALL-SCALE INTERFACIAL DEBONDING
    Journal of Materials Science
    
    S. Ochiai e M. Hojo, "REDUCTION IN ENERGY-RELEASE RATE FOR MODE-I FRACTURE OF A FIBER WITH A CRACKED COATING LAYER DUE TO SMALL-SCALE INTERFACIAL DEBONDING", Journal of Materials Science, 31(8), 1996, pp. 2027-2034
75. DEGUCHI T; ITO M; OBATA A; KOH Y; YAMAGISHI T; OSHIDA Y
    TRIAL PRODUCTION OF TITANIUM ORTHODONTIC BRACKETS FABRICATED BY METALINJECTION-MOLDING (MIM) WITH SINTERING
    Journal of dental research
    
    T. Deguchi et al., "TRIAL PRODUCTION OF TITANIUM ORTHODONTIC BRACKETS FABRICATED BY METALINJECTION-MOLDING (MIM) WITH SINTERING", Journal of dental research, 75(7), 1996, pp. 1491-1496
76. GU JY; HIGUCHI M; MORITA M; HSE CY
    SYNTHETIC CONDITIONS AND CHEMICAL STRICTU RES OF UREA-FORMALDEHYDE RESINS .3. MOLECULAR-STRUCTURE OF RESIN SYNTHESIZED BY CONDENSATION UNDER STRONGLY ACIDIC CONDITIONS
    Mokuzai Gakkaishi
    
    J.Y. Gu et al., "SYNTHETIC CONDITIONS AND CHEMICAL STRICTU RES OF UREA-FORMALDEHYDE RESINS .3. MOLECULAR-STRUCTURE OF RESIN SYNTHESIZED BY CONDENSATION UNDER STRONGLY ACIDIC CONDITIONS", Mokuzai Gakkaishi, 42(5), 1996, pp. 483-488
77. GU JY; HIGUCHI M; MORITA M; HSE CY
    SYNTHETIC CONDITIONS AND CHEMICAL STRUCTU RES OF UREA-FORMALDEHYDE RESINS .2. SYNTHETIC PROCEDURES INVOLVING A CONDENSATION STEP UNDER STRONGLY ACIDIC CONDITIONS AND THE PROPERTIES OF THE RESINS OBTAINED
    Mokuzai Gakkaishi
    
    J.Y. Gu et al., "SYNTHETIC CONDITIONS AND CHEMICAL STRUCTU RES OF UREA-FORMALDEHYDE RESINS .2. SYNTHETIC PROCEDURES INVOLVING A CONDENSATION STEP UNDER STRONGLY ACIDIC CONDITIONS AND THE PROPERTIES OF THE RESINS OBTAINED", Mokuzai Gakkaishi, 42(2), 1996, pp. 149-156
78. UMEMURA K; TANAKA H; MIZUNO Y; KAWAI S
    CURING BEHAVIOR OF WOOD ADHESIVES UNDER HIGH-PRESSURE STEAM .3. BONDING STRENGTH OF PHENOLIC RESIN
    Mokuzai Gakkaishi
    
    K. Umemura et al., "CURING BEHAVIOR OF WOOD ADHESIVES UNDER HIGH-PRESSURE STEAM .3. BONDING STRENGTH OF PHENOLIC RESIN", Mokuzai Gakkaishi, 42(10), 1996, pp. 985-991
79. OCHIAI S; MATSUNAGA K; WAKU Y; YAMAMURA T; HOJO M; OSAMURA K
    TEMPERATURE-DEPENDENCE MECHANISM OF TENSILE-STRENGTH OF SI-TI-C-O FIBER-ALUMINUM MATRIX COMPOSITES
    Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    
    S. Ochiai et al., "TEMPERATURE-DEPENDENCE MECHANISM OF TENSILE-STRENGTH OF SI-TI-C-O FIBER-ALUMINUM MATRIX COMPOSITES", Metallurgical and materials transactions. A, Physical metallurgy andmaterials science, 26(3), 1995, pp. 647-652
80. DRAPER SL; AIKIN BJM; ELDRIDGE JI
    TENSILE BEHAVIOR OF AL2O3 FEAL+B AND AL2O3/FECRALY COMPOSITES/
    Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    
    S.L. Draper et al., "TENSILE BEHAVIOR OF AL2O3 FEAL+B AND AL2O3/FECRALY COMPOSITES/", Metallurgical and materials transactions. A, Physical metallurgy andmaterials science, 26(10), 1995, pp. 2719-2731
81. KOKAWA H; TSUZUKI T; KUWANA T
    EFFECT OF INITIAL MICROSTRUCTURE OF INTERMEDIATE MATERIAL ON SUPERPLASTIC DIFFUSION BONDING OF DUPLEX STAINLESS-STEEL
    ISIJ international
    
    H. Kokawa et al., "EFFECT OF INITIAL MICROSTRUCTURE OF INTERMEDIATE MATERIAL ON SUPERPLASTIC DIFFUSION BONDING OF DUPLEX STAINLESS-STEEL", ISIJ international, 35(10), 1995, pp. 1291-1297
82. HAMAD BS
    COMPARATIVE BOND STRENGTH OF COATED AND UNCOATED BARS WITH DIFFERENT RIB GEOMETRIES
    ACI materials journal
    
    B.S. Hamad, "COMPARATIVE BOND STRENGTH OF COATED AND UNCOATED BARS WITH DIFFERENT RIB GEOMETRIES", ACI materials journal, 92(6), 1995, pp. 579-590
83. GORRES J; AMIRI R; WOOD JR; KARNIS A
    THE SHEAR BOND STRENGTH OF MECHANICAL PULP FIBERS
    Journal of pulp and paper science
    
    J. Gorres et al., "THE SHEAR BOND STRENGTH OF MECHANICAL PULP FIBERS", Journal of pulp and paper science, 21(5), 1995, pp. 161-164
84. CHEN M; BIERMANN CJ
    SIZING - INVESTIGATION OF THE MECHANISM OF PAPER SIZING THROUGH A DESIZING APPROACH
    Tappi journal
    
    M. Chen e C.J. Biermann, "SIZING - INVESTIGATION OF THE MECHANISM OF PAPER SIZING THROUGH A DESIZING APPROACH", Tappi journal, 78(8), 1995, pp. 120-126
85. WALLACE JR; BROMBEREK AE; YOUNG SN
    HIGH-DENSITY PAPERS AND CORRUGATOR RUNNABILITY
    Tappi journal
    
    J.R. Wallace et al., "HIGH-DENSITY PAPERS AND CORRUGATOR RUNNABILITY", Tappi journal, 78(4), 1995, pp. 183-188
86. FINSON E; FELTS J
    TRANSPARENT SIO2 BARRIER COATINGS - CONVERSION AND PRODUCTION STATUS
    Tappi journal
    
    E. Finson e J. Felts, "TRANSPARENT SIO2 BARRIER COATINGS - CONVERSION AND PRODUCTION STATUS", Tappi journal, 78(1), 1995, pp. 161-165
87. CHEN H; YI MZ; XU KW; HE JW
    BONDING STRENGTHS OF PCVD FILMS UNDER CYCLIC LOADING
    Surface & coatings technology
    
    H. Chen et al., "BONDING STRENGTHS OF PCVD FILMS UNDER CYCLIC LOADING", Surface & coatings technology, 74-5(1-3), 1995, pp. 253-258
88. HE JW; BAI CD; XU KW; HU NS
    IMPROVING THE ANTICORROSION AND MECHANICAL-BEHAVIOR OF PACVD TIN
    Surface & coatings technology
    
    J.W. He et al., "IMPROVING THE ANTICORROSION AND MECHANICAL-BEHAVIOR OF PACVD TIN", Surface & coatings technology, 74-5(1-3), 1995, pp. 387-393
89. LI J; FARTASH B; HERMANSSON L
    HYDROXYAPATITE ALUMINA COMPOSITES AND BONE-BONDING
    Biomaterials
    
    J. Li et al., "HYDROXYAPATITE ALUMINA COMPOSITES AND BONE-BONDING", Biomaterials, 16(5), 1995, pp. 417-422
90. TAKAHASHI A; KOSHINO T
    COMPRESSIVE AND BONE-BONDING STRENGTH OF HYDROXYAPATITE THERMAL-DECOMPOSITION PRODUCT IMPLANTED IN THE FEMUR OF RABBIT AS A BIOACTIVE CERAMIC BONE-CEMENT
    Biomaterials
    
    A. Takahashi e T. Koshino, "COMPRESSIVE AND BONE-BONDING STRENGTH OF HYDROXYAPATITE THERMAL-DECOMPOSITION PRODUCT IMPLANTED IN THE FEMUR OF RABBIT AS A BIOACTIVE CERAMIC BONE-CEMENT", Biomaterials, 16(12), 1995, pp. 937-943
91. KARNIS A
    THE ROLE OF LATENT AND DELATENT MECHANICAL PULP FINES IN SHEET STRUCTURE AND PULP PROPERTIES
    Paperi ja puu
    
    A. Karnis, "THE ROLE OF LATENT AND DELATENT MECHANICAL PULP FINES IN SHEET STRUCTURE AND PULP PROPERTIES", Paperi ja puu, 77(8), 1995, pp. 491-497
92. GU JY; HIGUCHI M; MORITA M; HSE CY
    SYNTHETIC CONDITIONS AND CHEMICAL STRUCTU RES OF UREA-FORMALDEHYDE RESINS .1. PROPERTIES OF THE RESINS SYNTHESIZED BY 3 DIFFERENT PROCEDURES
    Mokuzai Gakkaishi
    
    J.Y. Gu et al., "SYNTHETIC CONDITIONS AND CHEMICAL STRUCTU RES OF UREA-FORMALDEHYDE RESINS .1. PROPERTIES OF THE RESINS SYNTHESIZED BY 3 DIFFERENT PROCEDURES", Mokuzai Gakkaishi, 41(12), 1995, pp. 1115-1121
93. INABA T; NISHIOKA T; TOKIZANE M
    THE EFFECTS OF VACUUM HEAT-TREATMENTS ON BONDING STRENGTH OF ANODICALLY OXIDIZED TITANIUM AND A TITANIUM-ALLOY
    Tetsu to hagane
    
    T. Inaba et al., "THE EFFECTS OF VACUUM HEAT-TREATMENTS ON BONDING STRENGTH OF ANODICALLY OXIDIZED TITANIUM AND A TITANIUM-ALLOY", Tetsu to hagane, 81(6), 1995, pp. 690-695
94. LANGELAND RJ
    HOT-MELT ADHESIVES FOR MEDICAL PACKAGING
    Tappi journal
    
    R.J. Langeland, "HOT-MELT ADHESIVES FOR MEDICAL PACKAGING", Tappi journal, 77(9), 1994, pp. 197-200
95. BATELKA JJ
    DEVELOPMENT OF GREEN-BOND STRENGTH IN THE SINGLEFACER .2.
    Tappi journal
    
    J.J. Batelka, "DEVELOPMENT OF GREEN-BOND STRENGTH IN THE SINGLEFACER .2.", Tappi journal, 77(7), 1994, pp. 71-73
96. DASGUPTA S
    MECHANISM OF PAPER TENSILE-STRENGTH DEVELOPMENT DUE TO PULP BEATING
    Tappi journal
    
    S. Dasgupta, "MECHANISM OF PAPER TENSILE-STRENGTH DEVELOPMENT DUE TO PULP BEATING", Tappi journal, 77(6), 1994, pp. 158-166
97. BATELKA JJ
    THE EFFECT OF BOXPLANT OPERATIONS ON CORRUGATED BOARD EDGE CRUSH TEST
    Tappi journal
    
    J.J. Batelka, "THE EFFECT OF BOXPLANT OPERATIONS ON CORRUGATED BOARD EDGE CRUSH TEST", Tappi journal, 77(4), 1994, pp. 193-198
98. ZIMMEL JM; MEYER FK; GREENZWEIG JE
    HIGH-PERFORMANCE REACTIVE HOT MELTS
    Tappi journal
    
    J.M. Zimmel et al., "HIGH-PERFORMANCE REACTIVE HOT MELTS", Tappi journal, 77(10), 1994, pp. 155-160
99. PAAVILAINEN L
    BONDING POTENTIAL OF SOFTWOOD SULFATE PULP FIBERS
    Paperi ja puu
    
    L. Paavilainen, "BONDING POTENTIAL OF SOFTWOOD SULFATE PULP FIBERS", Paperi ja puu, 76(3), 1994, pp. 162-173
100. YAMAGUCHI H; TAMURA N; HIGUCHI M
     UPGRADING OF PROTEIN GLUE BY COMPLEXATION WITH TANNINS - CONDITIONS FOR THE FORMATION OF GELATIN-TANNIN COMPLEX
     Mokuzai Gakkaishi
     
     H. Yamaguchi et al., "UPGRADING OF PROTEIN GLUE BY COMPLEXATION WITH TANNINS - CONDITIONS FOR THE FORMATION OF GELATIN-TANNIN COMPLEX", Mokuzai Gakkaishi, 40(10), 1994, pp. 1085-1091