Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'BASE ALLOYS' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 268 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Zeng, CL; Wu, WT
      Corrosion of Ni-Ti alloys in the molten (Li,K)(2)CO3 eutectic mixture

      CORROSION SCIENCE
    2. Sun, FS; Kim, SE; Cao, CX; Lee, YT; Yan, MG
      A study of Ti5Si3/gamma interface in TiAl alloys

      SCRIPTA MATERIALIA
    3. Noguchi, K; Nishida, M; Chiba, A
      Transmission electron microscopy of NiCrAlY raw powder material and the low pressure plasma sprayed coating

      SCRIPTA MATERIALIA
    4. Mabuchi, H; Morimoto, H; Kakitsuji, A; Tsuda, H; Matsui, T; Morii, K
      Microstructure and mechanical properties of Ll(2)-(Al,Cr)(3)Ti/Ti2AlN composites produced by reactive arc-melting

      SCRIPTA MATERIALIA
    5. Sun, FS; Cao, CX; Kim, SE; Lee, YT; Yan, MG
      Alloying mechanism of beta stabilizers in a TiAl alloy

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    6. Sun, FS; Cao, CX; Kim, SE; Lee, YT; Yan, MG
      Ti5Si3 whisker in-situ reinforced TiAl alloys

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    7. Grabke, HJ
      Corrosion of Alloy 600 in a carburization furnace

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    8. Liu, J; Zheng, JS; Xu, LM
      The corrosion behavior of 70/30 copper-zinc alloy under the biofilm of sulfate-reducing bacteria

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    9. Walker, IT; Greer, AL
      Displacive transformations in Fe-Ni nanophase alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    10. Chang, SY; Krupp, U; Christ, HJ
      Formation and compensation of internal stresses during internal nitridation of nickel-base alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    11. Rae, CMF; Matan, N; Reed, RC
      The role of stacking fault shear in the primary creep of [001]-oriented single crystal superalloys at 750 degrees C and 750 MPa

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    12. Seetharaman, V; Semiatin, SL
      Microstructures and tensile properties of Ti-45.5Al-2Nb-2Cr rolled sheets

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    13. Bian, Z; He, G; Chen, GL
      Al80Ni6Y8Co4Cu2 glassy alloy containing nanoscale particles by quenching

      JOURNAL OF MATERIALS SCIENCE LETTERS
    14. Wu, SK; Lin, HC; Chen, SH
      Phenomenological analysis of martensitic transformation in cold-rolled TiNi-base shape memory alloys

      MATERIALS CHEMISTRY AND PHYSICS
    15. Claussen, N; Schneider, GA; Travitzky, NA
      Novel in situ-infiltrated Al2O3-metal composites

      ZEITSCHRIFT FUR METALLKUNDE
    16. Marinelli, P; Baruj, A; Guillermet, AF; Sade, M
      Lattice parameters of metastable structures in quenched Fe-Mn alloys. PartII: hcp phase

      ZEITSCHRIFT FUR METALLKUNDE
    17. Saheb, N; Laoui, T; Daud, AR; Harun, M; Radiman, S; Yahaya, R
      Influence of Ti addition on wear properties of Al-Si eutectic alloys

      WEAR
    18. Pint, BA; Garratt-Reed, AJ; Hobbs, LW
      Analytical electron-microscopy study of the breakdown of alpha-Al2O3 scales formed on oxide dispersion-strengthened alloys

      OXIDATION OF METALS
    19. Liu, ZY; Gao, W
      Oxidation behavior of cast Ni3Al alloys and microcrystalline Ni3Al+5% Cr coatings with and without Y doping

      OXIDATION OF METALS
    20. Vintaikin, EZ; Nosova, GI
      Influence of external loads on the reversible effect of shape memory in alloys of the Mn-Cusystem

      METAL SCIENCE AND HEAT TREATMENT
    21. Delafosse, D; Magnin, T
      Hydrogen induced plasticity in stress corrosion cracking of engineering systems

      ENGINEERING FRACTURE MECHANICS
    22. Lindbergh, G; Zhu, BH
      Corrosion behaviour of high aluminium steels in molten carbonate in an anode gas environment

      ELECTROCHIMICA ACTA
    23. Zhu, B; Lindbergh, G
      Corrosion behaviour of high-chromium ferritic steels in molten carbonate in cathode environment

      ELECTROCHIMICA ACTA
    24. Bergman, B; Lagergren, C; Lindbergh, G; Schwartz, S; Zhu, BH
      Contact corrosion resistance between the cathode and current collector plate in the molten carbonate fuel cell

      JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    25. Gao, KW; Nakamura, M
      Effect of hydrogen on tensile properties of Ti-49at.% Al alloy

      SCRIPTA MATERIALIA
    26. Tian, BH; Schoberl, T; Pink, E; Fratzl, P
      Local mechanical properties of tensile-deformed Al-8.4 at.% Li alloys examined by nanoindentation under an atomic force microscope

      SCRIPTA MATERIALIA
    27. Abe, E; Gao, KW; Nakamura, M
      Local amorphization in hydrogen-charged two-phase TiAl alloy

      SCRIPTA MATERIALIA
    28. Lagerpusch, U; Mohles, V; Baither, D; Anczykowski, B; Nembach, E
      Double strengthening of copper by dissolved gold-atoms and by incoherent SiO2-particles: How do the two strengthening contributions superimpose?

      ACTA MATERIALIA
    29. Rapp, RA; Mehl, RF
      Some generalities in the analyses of equilibria in tonic solutions

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    30. Wu, RI; Perepezko, JH
      Liquidus temperature determination in multicomponent alloys by thermal analysis

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    31. Felicelli, SD; Poirier, DR; Sung, PK
      A model for prediction of pressure and redistribution of gas-forming elements in multicomponent casting alloys

      METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
    32. Lin, DL; Wang, Y; Liu, JL; Law, CC
      The effects of temperature, strain rate and minor boron on tensile properties of wrought Ti-47Al-2Mn-2Nb alloy

      INTERMETALLICS
    33. Song, Y; Yang, R; Li, D; Hu, ZQ; Guo, ZX
      A first principles study of the influence of alloying elements on TiAl: site preference

      INTERMETALLICS
    34. Hao, YL; Yang, R; Cui, YY; Li, D
      The effect of Ti/Al ratio on the site occupancies of alloying elements in gamma-TiAl

      INTERMETALLICS
    35. Grabke, HJ
      Corrosion by carbonaceous gases, carburization and metal dusting, and methods of prevention (Reprinted from proceedings of High-Temperature Corrosionand Protection 2000)

      MATERIALS AT HIGH TEMPERATURES
    36. Wei, Q; Pippel, E; Woltersdorf, J; Strauss, S; Grabke, HJ
      Orientation dependence of metal dusting nanoprocesses on nickel single crystals

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    37. Holcomb, GR
      Hot corrosion in a temperature gradient

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    38. Biedenkopf, P; Bischoff, MM; Wochner, T
      Corrosion phenomena of alloys and electrode materials in molten carbonate fuel cells

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    39. Taluts, NI; Dobromyslov, AV
      Structural and phase transformations in quenched and aged Zr-Ir alloys

      JOURNAL OF ALLOYS AND COMPOUNDS
    40. Tsai, WT; Chou, CH
      Corrosion fatigue crack growth behavior of nickel base alloys in sodium thiosulfate solution

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    41. Zinkle, SJ; Ghoniem, NM
      Operating temperature windows for fusion reactor structural materials

      FUSION ENGINEERING AND DESIGN
    42. Nagayama, H; Ramaseshan, R; Mabuchi, H; Tsuda, H; Matsui, T; Morii, K
      Microstructure and mechanical properties of L1(2)-(Al, Cr)(3)Ti/TiB2+Ti2AlC composites produced by reactive arc-melting

      MATERIALS TRANSACTIONS JIM
    43. Mabuchi, H; Nagayama, H; Tsuda, H; Matsui, T; Morii, K
      Formation of ternary Ll(2) intermetallic compound and phase relation in the Al-Ti-Fe system

      MATERIALS TRANSACTIONS JIM
    44. Magnin, T; Renaudot, N; Foct, F
      The use of UHPNi and Ni base single crystals to study the stress corrosioncracking mechanisms of alloy 600 in PWR environment

      MATERIALS TRANSACTIONS JIM
    45. Lim, TH; Hwang, ER; Ha, HY; Nam, SW; Oh, IH; Hong, SA
      Effects of temperature and partial pressure of CO2/O-2 on corrosion behaviour of stainless-steel in molten Li/Na carbonate salt

      JOURNAL OF POWER SOURCES
    46. Ohnuma, I; Cui, Y; Liu, XJ; Inohana, Y; Ishihara, S; Ohtani, H; Kainuma, R; Ishida, K
      Phase equilibria of Sn-In based micro-soldering alloys

      JOURNAL OF ELECTRONIC MATERIALS
    47. Inoue, A; Makino, A; Mizushima, T
      Ferromagnetic bulk glassy alloys

      JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
    48. Ji, V; Zhang, YG; Chen, CQ
      The non-destructive estimation of the superficial mechanical properties ofcomponents in the INCONEL 600 alloy by X-ray diffraction peak width

      SURFACE & COATINGS TECHNOLOGY
    49. Yang, R; Hao, YL; Song, Y; Guo, ZX
      Site occupancy of alloying additions in titanium aluminides and its application to phase equilibrium evaluation

      ZEITSCHRIFT FUR METALLKUNDE
    50. Krupp, U; Chang, SY; Christ, HJ
      Occurrence of the ternary pi phase during nitriding of Ni-Cr and Ni-Cr-Ti alloys and its thermodynamic prediction

      ZEITSCHRIFT FUR METALLKUNDE
    51. Al-Rubaie, KS
      Equivalent hardness concept and two-body abrasion of iron-base alloys

      WEAR
    52. Kurokawa, K; Ochiai, G; Takahashi, H; Ohta, S; Takahashi, H
      Effects of sputter-deposited materials (W, Ti and SiC) on interfacial reaction between MoSi2 and Nb

      VACUUM
    53. Gavazov, K; Simeonova, Z; Alexandrov, A
      Extraction spectrophotometric determination of vanadium in natural waters and aluminium alloys using pyridyl azo resorcinol (PAR) and iodo-nitro-tetrazolium chloride (INT)

      TALANTA
    54. Clauberg, E; Uebing, C; Viefhaus, H; Grabke, HJ
      Surface segregation of antimony on ferritic single crystals

      SURFACE SCIENCE
    55. Kasparova, OV
      Intergranular corrosion of nickel alloys (review)

      PROTECTION OF METALS
    56. Frangini, S
      Corrosion behavior of AISI 316L stainless steel and ODS FeAl aluminide in eutectic Li2CO3-K2CO3 molten carbonates under flowing CO2-O-2 gas mixtures

      OXIDATION OF METALS
    57. Pajonk, G; Bubert, H
      Influence of pickling high alloyed CrNi-steels and nickel base alloys withcitric acid on the composition of their tarnish oxides

      MIKROCHIMICA ACTA
    58. Lunacek, J
      Prediction of the equilibrium segregation coefficients of solutes in binary systems of VIII and IX-group transition metals

      KOVOVE MATERIALY-METALLIC MATERIALS
    59. Zhang, GF; Morishita, M; Koyama, K
      Effect of Cr addition on the corrosion resistance of a Ni-NiMo2B2 two-phase alloy in a HNO3 aqueous solution

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    60. Tan, Y; Tanaka, H; Ma, CL; Kasama, A; Tanaka, R; Mishima, Y; Hanada, S
      Solid-solution strengthening and high-temperature compressive ductility ofNb-Mo-W ternary alloys

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    61. Horimura, H; Okamoto, K; Inoue, A
      Phase decomposition and mechanical properties during annealing of melt-spun Al-Fe-Y alloys

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    62. Mabuchi, H; Tsuda, H; Matsui, T; Morii, K
      Effects of vanadium addition on the material properties of Ll(2)-type ordered alloys in the Al-Ti-Cr system

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    63. Marti, A
      Cobalt-base alloys used in bone surgery

      INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED
    64. Pound, BG
      The effect of aging on hydrogen trapping in precipitation-hardened alloys

      CORROSION SCIENCE
    65. Bai, WJ; Robinson, PT; Fang, QS; Yang, JS; Yan, BG; Zhang, ZM; Hu, XF; Zhou, MF; Malpas, J
      The PGE and base-metal alloys in the podiform chromitites of the Luobusa ophiolite, southern Tibet

      CANADIAN MINERALOGIST
    66. Prokoshkin, SD; Turenne, S; Khmelevskaya, IY; Brailovski, V; Trochu, F
      Structural mechanisms of high-temperature shape changes in titanium-nickelalloys after low-temperature thermomechanical treatment

      CANADIAN METALLURGICAL QUARTERLY
    67. Liu, Y; Lin, DL; Liu, ZG; Wang, ZG
      Superlattice dislocations in Ti-rich polysynthetically twinned crystals ofTiAl

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    68. Gang, HR; Ma, JJ
      Alloying of Zn-27% Al with antimony

      INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
    69. del Valle, JA; Picasso, AC; Alvarez, I; Romero, R
      Age-hardening behavior of inconel X-750 superalloy

      SCRIPTA MATERIALIA
    70. Hao, YL; Yang, R; Cui, YY; Li, D
      Estimation of site occupancy error due to statistical noise for the ratio ALCHEMI method

      SCRIPTA MATERIALIA
    71. Hao, YL; Xu, DS; Cui, YY; Yang, R; Li, D
      The site occupancies of alloying elements in TiAl and Ti3Al alloys

      ACTA MATERIALIA
    72. Hao, YL; Yang, R; Cui, YY; Li, D; Gao, WF
      Compression properties of Ti-Al-X alloys in relation to site occupancies of alloying elements in TiAl and Ti3Al

      JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    73. Li, Y
      Formation, structure and properties of bulk metallic glasses

      JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    74. Huang, BY; He, YH; Wang, JN
      Improvement in mechanical and oxidation properties of TiAl alloys with Sb additions

      INTERMETALLICS
    75. Kim, S; Larson, DJ; Smith, GDW
      Alloying elements partitioning in TiAl-Ru intermetallic alloys

      INTERMETALLICS
    76. Pint, BA; Tortorelli, PF; Wright, IG
      Long-term oxidation performance of ingot-produced Fe3Al alloys

      MATERIALS AT HIGH TEMPERATURES
    77. Muller-Lorenz, EM; Grabke, HJ
      Coking by metal dusting of steels

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    78. Wei, Q; Pippel, E; Woltersdorf, J; Grabke, HJ
      Microprocesses of coke formation in metal dusting

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    79. Chun, CM; Ramanarayanan, TA; Mumford, JD
      Relationship between coking and metal dusting

      MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
    80. Liauo, CS; Fu, HC; Hsiao, IC; Huang, JC
      On the beta-transus and order/disorder transition temperature in superplastic super alpha(2) Ti3Al base alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    81. Wolowik, A; Janik-Czachor, M
      Anodic behaviour of Al-refractory metal amorphous alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    82. Jackson, MP; Starink, MJ; Reed, RC
      Determination of the precipitation kinetics of Ni3Al in the Ni-Al system using differential scanning calorimetry

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    83. Fahrmann, M; Hermann, W; Fahrmann, E; Boegli, A; Pollock, TM; Sockel, HG
      Determination of matrix and precipitate elastic constants in (gamma-gamma ') Ni-base model alloys, and their relevance to rafting

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    84. Jackson, MP; Reed, RC
      Heat treatment of UDIMET 720Li: the effect of microstructure on properties

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    85. Mintz, B
      The influence of composition on the hot ductility of steels and to the problem of transverse cracking

      ISIJ INTERNATIONAL
    86. Kritzer, P; Boukis, N; Dinjus, E
      Factors controlling corrosion in high-temperature aqueous solutions: a contribution to the dissociation and solubility data influencing corrosion processes

      JOURNAL OF SUPERCRITICAL FLUIDS
    87. Gale, WF; Shen, Y; Fergus, JW; Wen, X
      Anomalous wetting of Ti-48 at.% Al-2 at.% Cr-2 at.% Nb substrates by liquid copper

      JOURNAL OF MATERIALS RESEARCH
    88. Shine, MY; Chan, YC; Mierzwa, J; Yang, MH
      Determination of tellurium in indium antimonide by slurry sampling electrothermal atomic absorption spectrometry

      JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY
    89. Cockeram, BV
      Development of wear-resistant coatings for cobalt-base alloys

      SURFACE & COATINGS TECHNOLOGY
    90. Padula, SA; Shyam, A; Ritchie, RO; Milligan, WW
      High frequency fatigue crack propagation behavior of a nickel-base turbinedisk alloy

      INTERNATIONAL JOURNAL OF FATIGUE
    91. Nickel, H; Clemens, D; Quadakkers, WJ; Singheiser, L
      Development of NiCrAlY alloys for corrosion-resistant coatings and thermalbarrier coatings of gas turbine components

      JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
    92. Perez, P; Gonzalez-Carrasco, JL; Adeva, P
      The effect of Cr implantation on the isothermal-oxidation behavior of a Ni3Al PM alloy

      OXIDATION OF METALS
    93. Gesmundo, F; Niu, Y
      The formation of two layers in the internal oxidation of binary alloys by two oxidants in the absence of external scales

      OXIDATION OF METALS
    94. Yamamoto, Y; Hashimoto, K; Kimura, T; Nobuki, M; Kohno, N
      L1(2) single phase region in Al-Ti base ternary and quaternary systems at 1450 K

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    95. Prokoshkin, SD; Khmelevskaya, IY; Tyurenn, S; Brailovskii, V; Troshyu, F; Lagunova, MI; Morozova, TV
      In situ electron-microscopic study of the structural mechanisms of a high-temperature shape-memory effect in titanium nickelide

      FIZIKA METALLOV I METALLOVEDENIE
    96. Keijzer, M; Lindbergh, G; Hemmes, K; van der Put, PJJM; Schoonman, J; de Wit, JHW
      Corrosion of 304 stainless steel in molten-carbonate fuel cells

      JOURNAL OF THE ELECTROCHEMICAL SOCIETY
    97. Zhu, BH; Lindbergh, G; Simonsson, D
      Comparison of electrochemical and surface characterisation methods for investigation of corrosion of bipolar plate materials in molten carbonate fuelcell - Part I. Electrochemical study

      CORROSION SCIENCE
    98. Ferreira, SLC; de Jesus, DS; Cassella, RJ; Costa, ACS; de Carvalho, MS; Santelli, RE
      An on-line solid phase extraction system using polyurethane foam for the spectrophotometric determination of nickel in silicates and alloys

      ANALYTICA CHIMICA ACTA
    99. Karmakar, G; Sen, R; Meikap, AK; Chattopadhyay, SK; Chatterjee, SK; Surappa, MK
      The studies on micro-structural defects in deformed composite matrix of Al-Si-Mg and SiC

      JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
    100. ZIVKOBABIC J; IVANKOVIC V; PANDURIC J
      QUANTITATIVE THIN-LAYER CHROMATOGRAPHIC IDENTIFICATION OF DENTAL BASEALLOYS

      Journal of chromatography B. Biomedical sciences and applications


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 07/06/20 alle ore 08:26:17