Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. RODRIGUES NETO J B; MORENO R
   Effect of mechanical activation on the rheology and casting performance of kaolin/talc/alumina suspensions for manufacturing dense cordierite bodies
   Applied clay science
   
   B. Rodrigues Neto J e R. Moreno, "Effect of mechanical activation on the rheology and casting performance of kaolin/talc/alumina suspensions for manufacturing dense cordierite bodies", Applied clay science, 38(3-4), 2008, pp. 209-218
2. Xu, Q; Hayes, RW; Lavernia, EJ
   Creep properties of ball-milled and HIPed pure tantalum
   SCRIPTA MATERIALIA
   
   Q. Xu et al., "Creep properties of ball-milled and HIPed pure tantalum", SCR MATER, 45(4), 2001, pp. 447-454
3. Umemoto, M; Liu, ZG; Masuyama, K; Hao, XJ; Tsuchiya, K
   Nanostructured Fe-C alloys produced by ball milling
   SCRIPTA MATERIALIA
   
   M. Umemoto et al., "Nanostructured Fe-C alloys produced by ball milling", SCR MATER, 44(8-9), 2001, pp. 1741-1745
4. Liu, ZG; Hao, XJ; Masuyama, K; Tsuchiya, K; Umemoto, M; Hao, SM
   Nanocrystal formation in a ball milled eutectoid steel
   SCRIPTA MATERIALIA
   
   Z.G. Liu et al., "Nanocrystal formation in a ball milled eutectoid steel", SCR MATER, 44(8-9), 2001, pp. 1775-1779
5. Lee, JS; Lee, CS; Oh, ST; Kim, JG
   Phase evolution of Fe2O3 nanoparticle during high energy ball milling
   SCRIPTA MATERIALIA
   
   J.S. Lee et al., "Phase evolution of Fe2O3 nanoparticle during high energy ball milling", SCR MATER, 44(8-9), 2001, pp. 2023-2026
6. Kong, LB; Ma, J; Zhu, W; Tan, OK
   Reaction sintering of partially reacted system for PZT ceramics via a high-energy ball milling
   SCRIPTA MATERIALIA
   
   L.B. Kong et al., "Reaction sintering of partially reacted system for PZT ceramics via a high-energy ball milling", SCR MATER, 44(2), 2001, pp. 345-350
7. Baviera, P; Harel, S; Garem, H; Grosbras, M
   Elaboration and structure of nanostructured TiC: A XRD and HRTEM study
   SCRIPTA MATERIALIA
   
   P. Baviera et al., "Elaboration and structure of nanostructured TiC: A XRD and HRTEM study", SCR MATER, 44(12), 2001, pp. 2721-2727
8. Lucks, I; Lamparter, P; Mittemeijer, EJ
   Uptake of iron, oxygen and nitrogen in molybdenum during ball milling
   ACTA MATERIALIA
   
   I. Lucks et al., "Uptake of iron, oxygen and nitrogen in molybdenum during ball milling", ACT MATER, 49(13), 2001, pp. 2419-2428
9. Oelerich, W; Klassen, T; Bormann, R
   Mg-based hydrogen storage materials with improved hydrogen sorption
   MATERIALS TRANSACTIONS
   
   W. Oelerich et al., "Mg-based hydrogen storage materials with improved hydrogen sorption", MATER TRANS, 42(8), 2001, pp. 1588-1592
10. Tsuzuki, T; McCormick, PG
    Mechanochemical synthesis of niobium pentoxide nanoparticles
    MATERIALS TRANSACTIONS
    
    T. Tsuzuki e P.G. McCormick, "Mechanochemical synthesis of niobium pentoxide nanoparticles", MATER TRANS, 42(8), 2001, pp. 1623-1628
11. Nagashima, M; Maki, K; Hayakawa, M
    Fabrication of Al2O3/ZrO2 micro/nano-composite prepared by high energy ball milling
    MATERIALS TRANSACTIONS
    
    M. Nagashima et al., "Fabrication of Al2O3/ZrO2 micro/nano-composite prepared by high energy ball milling", MATER TRANS, 42(6), 2001, pp. 1119-1123
12. Chaffron, L; Le Bouar, Y; Martin, G
    Driven phase transformations: A useful concept for wear studies?
    COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE IV PHYSIQUE ASTROPHYSIQUE
    
    L. Chaffron et al., "Driven phase transformations: A useful concept for wear studies?", CR AC S IV, 2(5), 2001, pp. 749-759
13. Dong, J; Shen, WC; Hu, XF; Zhang, BF; Liu, X; Kang, FY; Gu, JL; Chen, NP
    A kind of carbon whiskers in new structure and morphology
    SCIENCE IN CHINA SERIES B-CHEMISTRY
    
    J. Dong et al., "A kind of carbon whiskers in new structure and morphology", SCI CHINA B, 44(1), 2001, pp. 55-62
14. Principi, G; Spataru, T; Gupta, R; Enzo, S; Kuncser, V; Filoti, G
    Mechanically alloyed Cu-Fe studied by Mossbauer spectroscopy
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    G. Principi et al., "Mechanically alloyed Cu-Fe studied by Mossbauer spectroscopy", J ALLOY COM, 326(1-2), 2001, pp. 188-192
15. Bid, S; Banerjee, A; Kumar, S; Pradhan, SK; De, UY; Banerjee, D
    Nanophase iron oxides by ball-mill grinding and their Mossbauer characterization
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    S. Bid et al., "Nanophase iron oxides by ball-mill grinding and their Mossbauer characterization", J ALLOY COM, 326(1-2), 2001, pp. 292-297
16. Inoue, H; Miyauchi, R; Tanaka, T; Choi, WK; Shin-Ya, R; Murayama, JI; Iwakura, C
    Effect of ball-milling with Ni and Raney Ni on surface structural characteristics of TiV2.1Ni0.3 alloy
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    H. Inoue et al., "Effect of ball-milling with Ni and Raney Ni on surface structural characteristics of TiV2.1Ni0.3 alloy", J ALLOY COM, 325(1-2), 2001, pp. 299-303
17. Gialanella, S; Lutterotti, L
    Metastable structures in alpha-beta ' brass
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    S. Gialanella e L. Lutterotti, "Metastable structures in alpha-beta ' brass", J ALLOY COM, 317, 2001, pp. 479-484
18. Oelerich, W; Klassen, T; Bormann, R
    Metal oxides as catalysts for improved hydrogen sorption in nanocrystalline Mg-based materials
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    W. Oelerich et al., "Metal oxides as catalysts for improved hydrogen sorption in nanocrystalline Mg-based materials", J ALLOY COM, 315(1-2), 2001, pp. 237-242
19. Cao, W; Tan, OK; Zhu, W; Jiang, B; Reddy, CVG
    An amorphous-like x alpha-(FeO3)-O-2-(1-x)ZrO2 solid solution system for low temperature resistive-type oxygen sensing
    SENSORS AND ACTUATORS B-CHEMICAL
    
    W. Cao et al., "An amorphous-like x alpha-(FeO3)-O-2-(1-x)ZrO2 solid solution system for low temperature resistive-type oxygen sensing", SENS ACTU-B, 77(1-2), 2001, pp. 421-426
20. Tsai, YC; Hsieh, JM
    A study of a design and NC manufacturing model of ball-end cutters
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    Y.C. Tsai e J.M. Hsieh, "A study of a design and NC manufacturing model of ball-end cutters", J MATER PR, 117(1-2), 2001, pp. 183-192
21. Ma, ML; Liu, XK; Xi, SQ; Chai, DL; Zhou, J
    Effect of material characteristics on the ignition of the combustion reactions induced by ball milling
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    M.L. Ma et al., "Effect of material characteristics on the ignition of the combustion reactions induced by ball milling", J MATER PR, 116(2-3), 2001, pp. 124-127
22. Kita, Y; Furuike, H; Kakino, Y; Nakagawa, H; Hirogaki, T
    Basic study of ball end milling on hardened steel
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    Y. Kita et al., "Basic study of ball end milling on hardened steel", J MATER PR, 111(1-3), 2001, pp. 240-243
23. Sakurai, K; Guo, XM
    Mechanical solid-state formation of Y(1-x)Ce(x)Al0(3) and its application as an X-ray scintillator
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    K. Sakurai e X.M. Guo, "Mechanical solid-state formation of Y(1-x)Ce(x)Al0(3) and its application as an X-ray scintillator", MAT SCI E A, 304, 2001, pp. 403-407
24. Castricum, HL; Bakker, H; Poels, EK
    Oxidation and reduction in copper/zinc oxides by mechanical milling
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    H.L. Castricum et al., "Oxidation and reduction in copper/zinc oxides by mechanical milling", MAT SCI E A, 304, 2001, pp. 418-423
25. Chattopadhyay, PP; Pabi, SK; Manna, I
    A metastable allotropic transformation in Nb induced by planetary ball milling
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    P.P. Chattopadhyay et al., "A metastable allotropic transformation in Nb induced by planetary ball milling", MAT SCI E A, 304, 2001, pp. 424-428
26. Takacs, L; Mandal, SK
    Preparation of some metal phosphides by ball milling
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    L. Takacs e S.K. Mandal, "Preparation of some metal phosphides by ball milling", MAT SCI E A, 304, 2001, pp. 429-433
27. Varghese, V; Sharma, A; Chattopadhyay, K
    Reaction ball milling of systems involving ionic bonds
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    V. Varghese et al., "Reaction ball milling of systems involving ionic bonds", MAT SCI E A, 304, 2001, pp. 434-437
28. Chinnasamy, CN; Narayanasamy, A; Ponpandian, N; Chattopadhyay, K
    The influence of Fe3+ ions at tetrahedral sites on the magnetic propertiesof nanocrystalline ZnFe2O4
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    C.N. Chinnasamy et al., "The influence of Fe3+ ions at tetrahedral sites on the magnetic propertiesof nanocrystalline ZnFe2O4", MAT SCI E A, 304, 2001, pp. 983-987
29. Yang, XY; Huang, ZW; Wu, YK; Ye, HQ
    HREM observations of the synthesized process of nano-sized SiC by ball milling of Si and C mixed powders
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    X.Y. Yang et al., "HREM observations of the synthesized process of nano-sized SiC by ball milling of Si and C mixed powders", MAT SCI E A, 300(1-2), 2001, pp. 278-283
30. Stubicar, M; Blazina, Z; Tonejc, A; Stubicar, N; Krumes, D
    The effect of high energy ball milling on the crystal structure of GDNi(5)
    PHYSICA B
    
    M. Stubicar et al., "The effect of high energy ball milling on the crystal structure of GDNi(5)", PHYSICA B, 304(1-4), 2001, pp. 304-308
31. Yin, J; Umemoto, M; Liu, ZG; Tsuchiya, K
    Formation mechanism and annealing behavior of nanocrystalline ferrite in pure Fe fabricated by ball milling
    ISIJ INTERNATIONAL
    
    J. Yin et al., "Formation mechanism and annealing behavior of nanocrystalline ferrite in pure Fe fabricated by ball milling", ISIJ INT, 41(11), 2001, pp. 1389-1396
32. Abdul-Razzaq, W; Wu, M
    Magnetic properties of ball-milled Mn nanoparticles
    SUPERLATTICES AND MICROSTRUCTURES
    
    W. Abdul-Razzaq e M. Wu, "Magnetic properties of ball-milled Mn nanoparticles", SUPERLATT M, 29(4), 2001, pp. 273-279
33. Wang, GX; Ahn, JH; Lindsay, MJ; Sun, L; Bradhurst, DH; Dou, SX; Liu, HK
    Graphite-Tin composites as anode materials for lithium-ion batteries
    JOURNAL OF POWER SOURCES
    
    G.X. Wang et al., "Graphite-Tin composites as anode materials for lithium-ion batteries", J POWER SOU, 97-8, 2001, pp. 211-215
34. Belliard, F; Irvine, JTS
    Electrochemical performance of ball-milled ZnO-SnO2 systems as anodes in lithium-ion battery
    JOURNAL OF POWER SOURCES
    
    F. Belliard e J.T.S. Irvine, "Electrochemical performance of ball-milled ZnO-SnO2 systems as anodes in lithium-ion battery", J POWER SOU, 97-8, 2001, pp. 219-222
35. Mendoza-Suarez, G; Matutes-Aquino, JA; Escalante-Garcia, JI; Mancha-Molinar, H; Rios-Jara, D; Johal, KK
    Magnetic properties and microstructure of Ba-ferrite powders prepared by ball milling
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
    
    G. Mendoza-Suarez et al., "Magnetic properties and microstructure of Ba-ferrite powders prepared by ball milling", J MAGN MAGN, 223(1), 2001, pp. 55-62
36. Ko, TJ; Kim, HS; Lee, SS
    Selection of the machining inclination angle in high-speed ball end milling
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    
    T.J. Ko et al., "Selection of the machining inclination angle in high-speed ball end milling", INT J ADV M, 17(3), 2001, pp. 163-170
37. Lin, SW; Lai, HY
    A mathematical model for manufacturing ball-end cutters using a two-axis NC machine
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    
    S.W. Lin e H.Y. Lai, "A mathematical model for manufacturing ball-end cutters using a two-axis NC machine", INT J ADV M, 17(12), 2001, pp. 881-888
38. Chattopadhyay, PP; Manna, I; Talapatra, S; Pabi, SK
    A mathematical analysis of milling mechanics in a planetary ball mill
    MATERIALS CHEMISTRY AND PHYSICS
    
    P.P. Chattopadhyay et al., "A mathematical analysis of milling mechanics in a planetary ball mill", MATER CH PH, 68(1-3), 2001, pp. 85-94
39. Venkataraman, A; Hiremath, VA; Date, SK; Kulkarni, SD
    A new combustion route to gamma-Fe2O3 synthesis
    BULLETIN OF MATERIALS SCIENCE
    
    A. Venkataraman et al., "A new combustion route to gamma-Fe2O3 synthesis", B MATER SCI, 24(6), 2001, pp. 617-621
40. Chatterjee, P; Sen Gupta, SP; Sen, S
    Particle fracture and plastic deformation in vanadium pentoxide powders induced by high energy vibrational ball-mill
    BULLETIN OF MATERIALS SCIENCE
    
    P. Chatterjee et al., "Particle fracture and plastic deformation in vanadium pentoxide powders induced by high energy vibrational ball-mill", B MATER SCI, 24(2), 2001, pp. 173-180
41. Kong, LB; Ma, J
    PZT ceramics formed directly from oxides via reactive sintering
    MATERIALS LETTERS
    
    L.B. Kong e J. Ma, "PZT ceramics formed directly from oxides via reactive sintering", MATER LETT, 51(2), 2001, pp. 95-100
42. Kong, LB; Ma, J; Zhu, W; Tan, OK
    Preparation of Bi4Ti3O12 ceramics via a high-energy ball milling process
    MATERIALS LETTERS
    
    L.B. Kong et al., "Preparation of Bi4Ti3O12 ceramics via a high-energy ball milling process", MATER LETT, 51(2), 2001, pp. 108-114
43. Hong, SH; Kim, BK
    Fabrication of aluminum flake powder from foil scrap by a wet ball millingprocess
    MATERIALS LETTERS
    
    S.H. Hong e B.K. Kim, "Fabrication of aluminum flake powder from foil scrap by a wet ball millingprocess", MATER LETT, 51(2), 2001, pp. 139-143
44. Kong, LB; Ma, J; Huang, HT; Zhu, W; Tan, OK
    Lead zirconate titanate ceramics derived from oxide mixture treated by a high-energy ball milling process
    MATERIALS LETTERS
    
    L.B. Kong et al., "Lead zirconate titanate ceramics derived from oxide mixture treated by a high-energy ball milling process", MATER LETT, 50(2-3), 2001, pp. 129-133
45. Zhang, DL; Ying, DY
    Formation of fcc titanium during heating high-energy, ball-milled Al-Ti powders
    MATERIALS LETTERS
    
    D.L. Zhang e D.Y. Ying, "Formation of fcc titanium during heating high-energy, ball-milled Al-Ti powders", MATER LETT, 50(2-3), 2001, pp. 149-153
46. Tsuchida, T; Suzuki, K; Naganuma, H
    Low-temperature formation of ternary carbide Fe3M3C (M = Mo, W) assisted by mechanical activation
    SOLID STATE IONICS
    
    T. Tsuchida et al., "Low-temperature formation of ternary carbide Fe3M3C (M = Mo, W) assisted by mechanical activation", SOL ST ION, 141, 2001, pp. 623-631
47. Mulas, G; Monagheddu, M; Doppiu, S; Cocco, G; Maglia, F; Tamburini, UA
    Metal-metal oxides prepared by MSR and SHS techniques
    SOLID STATE IONICS
    
    G. Mulas et al., "Metal-metal oxides prepared by MSR and SHS techniques", SOL ST ION, 141, 2001, pp. 649-656
48. Kim, YJ; Suzuki, T; Hagiwara, T; Yamaji, I; Takai, R
    Enthalpy relaxation and glass to rubber transition of amorphous potato starch formed by ball-milling
    CARBOHYDRATE POLYMERS
    
    Y.J. Kim et al., "Enthalpy relaxation and glass to rubber transition of amorphous potato starch formed by ball-milling", CARBOHY POL, 46(1), 2001, pp. 1-6
49. Ikua, BW; Tanaka, H; Obata, F; Sakamoto, S
    Prediction of cutting forces and machining error in ball end milling of curved surfaces -I theoretical analysis
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISIONENGINEERING AND NANOTECHNOLOGY
    
    B.W. Ikua et al., "Prediction of cutting forces and machining error in ball end milling of curved surfaces -I theoretical analysis", PRECIS ENG, 25(4), 2001, pp. 266-273
50. Gajovic, A; Stubicar, M; Ivanda, M; Furic, K
    Raman spectroscopy of ball-milled TiO2
    JOURNAL OF MOLECULAR STRUCTURE
    
    A. Gajovic et al., "Raman spectroscopy of ball-milled TiO2", J MOL STRUC, 563, 2001, pp. 315-320
51. Serraj, S; Boudeville, P; Pauvert, B; Terol, A
    Effect on composition of dry mechanical grinding of calcium phosphate mixtures
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH
    
    S. Serraj et al., "Effect on composition of dry mechanical grinding of calcium phosphate mixtures", J BIOMED MR, 55(4), 2001, pp. 566-575
52. Takakura, W; Matsui, M; Yamada, A; Ueda, Y
    Magnetization and magnetoresistance of Fe3O4 prepared by Ball Milling method
    JOURNAL OF THE JAPAN INSTITUTE OF METALS
    
    W. Takakura et al., "Magnetization and magnetoresistance of Fe3O4 prepared by Ball Milling method", J JPN METAL, 65(9), 2001, pp. 787-790
53. Kosanovic, C; Subotic, B; Smit, I
    Results of hydrothermal treatment of the amorphous phases obtained by ballmilling of zeolites A, X and synthetic mordenite
    CROATICA CHEMICA ACTA
    
    C. Kosanovic et al., "Results of hydrothermal treatment of the amorphous phases obtained by ballmilling of zeolites A, X and synthetic mordenite", CROAT CHEM, 74(1), 2001, pp. 195-206
54. Mizugaki, Y; Hao, M; Kikkawa, K
    Geometric generating mechanism of machined surface by ball-nosed end milling
    CIRP ANNALS-MANUFACTURING TECHNOLOGY
    
    Y. Mizugaki et al., "Geometric generating mechanism of machined surface by ball-nosed end milling", CIRP ANN-M, 50(1), 2001, pp. 69-72
55. Roue, L; Guay, D; Schulz, R
    Hydrogen electrosorption in nanocrystalline Ti-based alloys
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY
    
    L. Roue et al., "Hydrogen electrosorption in nanocrystalline Ti-based alloys", J ELEC CHEM, 480(1-2), 2000, pp. 64-73
56. Lalande, G; Denis, MC; Gouerec, P; Guay, D; Dodelet, JP; Schulz, R
    Pt-based nanocomposites produced by high energy ball milling as electrocatalysts in polymer electrolyte fuel cells
    JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS
    
    G. Lalande et al., "Pt-based nanocomposites produced by high energy ball milling as electrocatalysts in polymer electrolyte fuel cells", J NEW M E S, 3(3), 2000, pp. 185-192
57. Delogu, F; Monagheddu, M; Mulas, G; Schiffini, L; Cocco, G
    Impact characteristics and mechanical alloying processes by ball milling: Experimental evaluation and modelling outcomes
    INTERNATIONAL JOURNAL OF NON-EQUILIBRIUM PROCESSING
    
    F. Delogu et al., "Impact characteristics and mechanical alloying processes by ball milling: Experimental evaluation and modelling outcomes", INT J NON-E, 11(3), 2000, pp. 235-269
58. Wang, P; Wang, AM; Wang, YL; Zhang, HF; Hu, ZQ
    Decomposition behavior of MGH(2) prepared by reaction ball-milling
    SCRIPTA MATERIALIA
    
    P. Wang et al., "Decomposition behavior of MGH(2) prepared by reaction ball-milling", SCR MATER, 43(1), 2000, pp. 83-87
59. Huang, JY; Zhu, YT
    Advances in the synthesis and characterization of boron nitride
    DEFECTS AND DIFFUSION IN CERAMICS
    
    J.Y. Huang e Y.T. Zhu, "Advances in the synthesis and characterization of boron nitride", DEFECT DIFF, 186-1, 2000, pp. 1-32
60. Tsuchida, T
    Hydrothermal synthesis of submicrometer crystals of boehmite
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    
    T. Tsuchida, "Hydrothermal synthesis of submicrometer crystals of boehmite", J EUR CERAM, 20(11), 2000, pp. 1759-1764
61. Kuncser, V; Rosenberg, M; Principi, G; Russo, U; Hernando, A; Navarro, E; Filoti, G
    Magnetic interactions in nanocrystalline FeRh alloys studied by in field Mossbauer spectroscopy
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    V. Kuncser et al., "Magnetic interactions in nanocrystalline FeRh alloys studied by in field Mossbauer spectroscopy", J ALLOY COM, 308, 2000, pp. 21-29
62. Bouaricha, S; Dodelet, JP; Guay, D; Huot, J; Boily, S; Schulz, R
    Effect of carbon-containing compounds on the hydriding behavior of nanocrystalline Mg2Ni
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    S. Bouaricha et al., "Effect of carbon-containing compounds on the hydriding behavior of nanocrystalline Mg2Ni", J ALLOY COM, 307, 2000, pp. 226-233
63. Han, SC; Lee, PS; Lee, JY; Zuttel, A; Schlapbach, L
    Effects of Ti on the cycle life of amorphous MgNi-based alloy prepared by ball milling
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    S.C. Han et al., "Effects of Ti on the cycle life of amorphous MgNi-based alloy prepared by ball milling", J ALLOY COM, 306(1-2), 2000, pp. 219-226
64. Berlouis, LEA; Cabrera, E; Hall-Barientos, E; Hall, PJ; Dodd, S; Morris, S; Imam, MA
    A thermal analysis investigation of the hydriding properties of nanocrystalline Mg-Ni based alloys prepared by high energy ball milling
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    L.E.A. Berlouis et al., "A thermal analysis investigation of the hydriding properties of nanocrystalline Mg-Ni based alloys prepared by high energy ball milling", J ALLOY COM, 305(1-2), 2000, pp. 82-89
65. El-Eskandarany, MS
    Structure and properties of nanocrystalline TiC full-density bulk alloy consolidated from mechanically reacted powders
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    M.S. El-Eskandarany, "Structure and properties of nanocrystalline TiC full-density bulk alloy consolidated from mechanically reacted powders", J ALLOY COM, 305(1-2), 2000, pp. 225-238
66. Yang, HB; Yuan, HT; Zhou, ZX; Wang, GS; Zhang, YS
    Characteristics of Mg2Ni0.75Co0.25 alloy after surface treatment
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    H.B. Yang et al., "Characteristics of Mg2Ni0.75Co0.25 alloy after surface treatment", J ALLOY COM, 305(1-2), 2000, pp. 282-289
67. Choi, WK; Tanaka, T; Morikawa, T; Inoue, H; Iwakura, C
    Effect of surface modification of TiV2.1Ni0.3 by ball-milling with MgNi oncharge-discharge cycle performance
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    W.K. Choi et al., "Effect of surface modification of TiV2.1Ni0.3 by ball-milling with MgNi oncharge-discharge cycle performance", J ALLOY COM, 302(1-2), 2000, pp. 82-86
68. Moon, KO; Oh, MS; Lee, KS
    Tensile properties of nitride dispersed Al-Ti alloy synthesized by reactive ball milling in N-2 gas
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    K.O. Moon et al., "Tensile properties of nitride dispersed Al-Ti alloy synthesized by reactive ball milling in N-2 gas", J ALLOY COM, 302(1-2), 2000, pp. 227-234
69. Choi, WK; Tanaka, T; Miyauchi, R; Morikawa, T; Inoue, H; Iwakura, C
    Electrochemical and structural characteristics of TiV2.1Ni0.3 surface-modified by ball-milling with MgNi
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    W.K. Choi et al., "Electrochemical and structural characteristics of TiV2.1Ni0.3 surface-modified by ball-milling with MgNi", J ALLOY COM, 299(1-2), 2000, pp. 141-147
70. Mahday, AA; El-Eskandarany, MS; Ahmed, HA; Amer, AA
    Mechanically induced solid state carburization for fabrication of nanocrystalline ZrC refractory material powders
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    A.A. Mahday et al., "Mechanically induced solid state carburization for fabrication of nanocrystalline ZrC refractory material powders", J ALLOY COM, 299(1-2), 2000, pp. 244-253
71. Wang, GX; Sun, L; Bradhurst, DH; Dou, SX; Liu, HK
    Lithium storage properties of nanocrystalline eta-Cu6Sn5 alloys prepared by ball-milling
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    G.X. Wang et al., "Lithium storage properties of nanocrystalline eta-Cu6Sn5 alloys prepared by ball-milling", J ALLOY COM, 299(1-2), 2000, pp. L12-L15
72. Zaluska, A; Zaluski, L; Strom-Olsen, JO
    Sodium alanates for reversible hydrogen storage
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    A. Zaluska et al., "Sodium alanates for reversible hydrogen storage", J ALLOY COM, 298(1-2), 2000, pp. 125-134
73. Wang, P; Wang, AM; Zhang, HF; Ding, BZ; Hu, ZQ
    Hydriding properties of a mechanically milled Mg-50 wt.% ZrFe1.4Cr0.6 composite
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    P. Wang et al., "Hydriding properties of a mechanically milled Mg-50 wt.% ZrFe1.4Cr0.6 composite", J ALLOY COM, 297(1-2), 2000, pp. 240-245
74. Bouaricha, S; Dodelet, JP; Guay, D; Huot, J; Boily, S; Schulz, R
    Hydriding behavior of Mg-Al and leached Mg-Al compounds prepared by high-energy ball-milling
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    S. Bouaricha et al., "Hydriding behavior of Mg-Al and leached Mg-Al compounds prepared by high-energy ball-milling", J ALLOY COM, 297(1-2), 2000, pp. 282-293
75. Liu, BH; Li, ZP; Okutsu, A; Suda, S
    A wet ball milling treatment of Zr-based AB(2) alloys as negative electrode materials
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    B.H. Liu et al., "A wet ball milling treatment of Zr-based AB(2) alloys as negative electrode materials", J ALLOY COM, 296(1-2), 2000, pp. 148-151
76. Ryu, JR; Moon, KI; Lee, KS
    Microstructure and mechanical properties of nanocrystalline Al-Ti alloys consolidated by plasma activated sintering
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    J.R. Ryu et al., "Microstructure and mechanical properties of nanocrystalline Al-Ti alloys consolidated by plasma activated sintering", J ALLOY COM, 296(1-2), 2000, pp. 157-165
77. El-Eskandarany, MS
    Fabrication of nanocrystalline WC and nanocomposite WC-MgO refractory materials at room temperature
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    M.S. El-Eskandarany, "Fabrication of nanocrystalline WC and nanocomposite WC-MgO refractory materials at room temperature", J ALLOY COM, 296(1-2), 2000, pp. 175-182
78. Shatla, M; Altan, T
    Analytical modeling of drilling and ball end milling
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    M. Shatla e T. Altan, "Analytical modeling of drilling and ball end milling", J MATER PR, 98(1), 2000, pp. 125-133
79. Hong, SH; Lee, DW; Kim, BK
    Manufacturing of aluminum flake powder from foil scrap by dry ball millingprocess
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    S.H. Hong et al., "Manufacturing of aluminum flake powder from foil scrap by dry ball millingprocess", J MATER PR, 100(1-3), 2000, pp. 105-109
80. Ying, DY; Zhang, DL
    Processing of Cu-Al2O3 metal matrix nanocomposite materials by using high energy ball milling
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    D.Y. Ying e D.L. Zhang, "Processing of Cu-Al2O3 metal matrix nanocomposite materials by using high energy ball milling", MAT SCI E A, 286(1), 2000, pp. 152-156
81. Mahmoud, MH; Hamdeh, HH; Abdel-Mageed, AI; Abdallah, AM; Fayek, MK
    Effect of HEBM on the cation distribution of Mn-ferrite
    PHYSICA B
    
    M.H. Mahmoud et al., "Effect of HEBM on the cation distribution of Mn-ferrite", PHYSICA B, 291(1-2), 2000, pp. 49-53
82. Matsubara, T; Uenishi, K; Kobayashi, KF
    Fabrication of thick intermetallic compound Al3Ti layer on metal substrateby combustion synthesis of ball-milled powder
    MATERIALS TRANSACTIONS JIM
    
    T. Matsubara et al., "Fabrication of thick intermetallic compound Al3Ti layer on metal substrateby combustion synthesis of ball-milled powder", MATER T JIM, 41(5), 2000, pp. 631-634
83. Nagae, T; Saji, S; Yanagimoto, T; Nose, M; Yokota, M
    Preparation of functionally graded materials by pulse current pressure sintering of ball milled Al-50 at% Ti powder
    MATERIALS TRANSACTIONS JIM
    
    T. Nagae et al., "Preparation of functionally graded materials by pulse current pressure sintering of ball milled Al-50 at% Ti powder", MATER T JIM, 41(3), 2000, pp. 457-460
84. Lo, CC
    CNC machine tool surface interpolator for ball-end milling of free-form surfaces
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    
    C.C. Lo, "CNC machine tool surface interpolator for ball-end milling of free-form surfaces", INT J MACH, 40(3), 2000, pp. 307-326
85. Feng, HY; Su, N
    Integrated tool path and feed rate optimization for the finishing machining of 3D plane surfaces
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    
    H.Y. Feng e N. Su, "Integrated tool path and feed rate optimization for the finishing machining of 3D plane surfaces", INT J MACH, 40(11), 2000, pp. 1557-1572
86. Sort, J; Nogues, J; Amils, X; Surinnach, S; Munnoz, JS; Baro, MD
    Room temperature magnetic hardening in mechanically milled ferromagnetic-antiferromagnetic composites
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
    
    J. Sort et al., "Room temperature magnetic hardening in mechanically milled ferromagnetic-antiferromagnetic composites", J MAGN MAGN, 219(1), 2000, pp. 53-57
87. Djega-Mariadassou, C; Bessais, L
    Emergence of order in nanocrystalline SmFe9
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
    
    C. Djega-Mariadassou e L. Bessais, "Emergence of order in nanocrystalline SmFe9", J MAGN MAGN, 210(1-3), 2000, pp. 81-87
88. Nakayama, S; Maekawa, S; Sato, T; Masuda, Y; Imai, S; Sakamoto, M
    Mechanical properties of ytterbia stabilized zirconia ceramics (Yb-TZP) fabricated from powders prepared by co-precipitation method
    CERAMICS INTERNATIONAL
    
    S. Nakayama et al., "Mechanical properties of ytterbia stabilized zirconia ceramics (Yb-TZP) fabricated from powders prepared by co-precipitation method", CERAM INT, 26(2), 2000, pp. 207-211
89. Sunol, JJ; Bonneau, ME; Roue, L; Guay, D; Schulz, R
    XPS surface study of nanocrystalline Ti-Ru-Fe materials
    APPLIED SURFACE SCIENCE
    
    J.J. Sunol et al., "XPS surface study of nanocrystalline Ti-Ru-Fe materials", APPL SURF S, 158(3-4), 2000, pp. 252-262
90. Kong, LB; Ma, J; Zhu, W; Tan, OK
    Highly enhanced sinterability of commercial PZT powders by high-energy ball milling
    MATERIALS LETTERS
    
    L.B. Kong et al., "Highly enhanced sinterability of commercial PZT powders by high-energy ball milling", MATER LETT, 46(5), 2000, pp. 274-280
91. Kong, LB; Zhu, W; Tan, OK
    Preparation and characterization of Pb(Zr0.52Ti0.48)O-3 ceramics from high-energy ball milling powders
    MATERIALS LETTERS
    
    L.B. Kong et al., "Preparation and characterization of Pb(Zr0.52Ti0.48)O-3 ceramics from high-energy ball milling powders", MATER LETT, 42(4), 2000, pp. 232-239
92. Diaz-Flores, LL; Perez-Bueno, JJ; Vorobiev, YV; Martinez, JR; Ruiz, F; Perez-Robles, F; Gonzalez-Hernandez, J
    The effect of ball milling dispersion on the optical properties of organicdyes trapped in silica films by the sol-gel method
    MATERIALS LETTERS
    
    L.L. Diaz-Flores et al., "The effect of ball milling dispersion on the optical properties of organicdyes trapped in silica films by the sol-gel method", MATER LETT, 42(1-2), 2000, pp. 25-32
93. Machida, N; Nishida, S; Shigematsu, T; Sakai, H; Tatsumisago, M; Minami, T
    Mechano chemical synthesis of a silver ion conductor in the system AgI-Ag3PO4
    SOLID STATE IONICS
    
    N. Machida et al., "Mechano chemical synthesis of a silver ion conductor in the system AgI-Ag3PO4", SOL ST ION, 136, 2000, pp. 381-386
94. Zhang, TY; Fei, XN; Wang, SR; Zhou, CL
    Pigmentation of Vat Blue RS by ball milling in solvents
    DYES AND PIGMENTS
    
    T.Y. Zhang et al., "Pigmentation of Vat Blue RS by ball milling in solvents", DYE PIGMENT, 45(1), 2000, pp. 15-21
95. Bakhshai, A; Soika, V; Susol, MA; Takacs, L
    Mechanochemical reactions in the Sn-Zn-S system: Further studies
    JOURNAL OF SOLID STATE CHEMISTRY
    
    A. Bakhshai et al., "Mechanochemical reactions in the Sn-Zn-S system: Further studies", J SOL ST CH, 153(2), 2000, pp. 371-380
96. Miyaoka, H; Kuze, T; Sano, H; Mori, H; Mizutani, G; Ushioda, S; Otsuka, N; Terano, M
    Raman spectrum of ball-milled alpha-TiCl3
    JOURNAL OF LUMINESCENCE
    
    H. Miyaoka et al., "Raman spectrum of ball-milled alpha-TiCl3", J LUMINESC, 87-9, 2000, pp. 709-711
97. Chen, XH; Yang, HS; Wu, GT; Wang, M; Deng, FM; Zhang, XB; Peng, JC; Li, WZ
    Generation of curved or closed-shell carbon nanostructures by ball-millingof graphite
    JOURNAL OF CRYSTAL GROWTH
    
    X.H. Chen et al., "Generation of curved or closed-shell carbon nanostructures by ball-millingof graphite", J CRYST GR, 218(1), 2000, pp. 57-61
98. Roue, L; Bonneau, ME; Guay, D; Blouin, M; Schulz, R
    Effect of oxygen and titanium contents on the stability of nanocrystallineTi-Ru-Fe-O cathode materials for chlorate electrolysis
    JOURNAL OF APPLIED ELECTROCHEMISTRY
    
    L. Roue et al., "Effect of oxygen and titanium contents on the stability of nanocrystallineTi-Ru-Fe-O cathode materials for chlorate electrolysis", J APPL ELEC, 30(4), 2000, pp. 491-498
99. Lo, CC
    Two-stage cutter-path scheduling for ball-end milling of concave and wall-bounded surfaces
    COMPUTER-AIDED DESIGN
    
    C.C. Lo, "Two-stage cutter-path scheduling for ball-end milling of concave and wall-bounded surfaces", COMPUT AID, 32(10), 2000, pp. 597-603
100. Guo, XM; Sakurai, K
     Formation of yttrium aluminum perovskite and yttrium aluminum garnet by mechanical solid-state reaction
     JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
     
     X.M. Guo e K. Sakurai, "Formation of yttrium aluminum perovskite and yttrium aluminum garnet by mechanical solid-state reaction", JPN J A P 1, 39(3A), 2000, pp. 1230-1234