Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'ANALYTICAL MODEL' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 282 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Dolgikh, DG; Sukhov, AM
      Parameters of cache systems based on a Zipf-like distribution

      COMPUTER NETWORKS-THE INTERNATIONAL JOURNAL OF COMPUTER AND TELECOMMUNICATIONS NETWORKING
    2. Morabito, G; Palazzo, S
      Congestion control for ABR traffic in satellite networks

      COMPUTER NETWORKS-THE INTERNATIONAL JOURNAL OF COMPUTER AND TELECOMMUNICATIONS NETWORKING
    3. Wiercigroch, M; Budak, E
      Sources of nonlinearities, chatter generation and suppression in metal cutting

      PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
    4. Meng, JY; Lui, EM; Liu, Y
      Dynamic response of skew highway bridges

      JOURNAL OF EARTHQUAKE ENGINEERING
    5. Goudeau, P; Renault, PO; Badawi, KF; Villain, P
      X-ray diffraction analysis residual stresses and elasticity constants in thin films

      VIDE-SCIENCE TECHNIQUE ET APPLICATIONS
    6. Schmitt, AJ; Velikovich, AL; Gardner, JH; Pawley, C; Obenschain, SP; Aglitskiy, Y; Chan, Y
      Growth of pellet imperfections and laser imprint in direct drive inertial confinement fusion targets

      PHYSICS OF PLASMAS
    7. Piriz, AR
      Hydrodynamic instability of ablation fronts in inertial confinement fusion

      PHYSICS OF PLASMAS
    8. Piriz, AR
      Compressibility effects on the Rayleigh-Taylor instability of an ablation front

      PHYSICS OF PLASMAS
    9. Hadji, L
      Thermal force induced by the presence of a particle near a solidifying interface - art. no. 051502

      PHYSICAL REVIEW E
    10. Banabic, D; Balan, T; Comsa, DS
      Closed-form solution for bulging through elliptical dies

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    11. Kim, SM; Lee, JW; Lee, SH; Choi, SB
      Analytical models and performance analyses of instruction fetch on superscalar processors

      IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES
    12. Liu, SG
      Evaluation of the Liu model for predicting rainfall interception in forests world-wide

      HYDROLOGICAL PROCESSES
    13. Akyildiz, IF; Morabito, G; Palazzo, S
      TCP-Peach for satellite networks: analytical model and performance evaluation

      INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS
    14. Billon, HH; Robinson, DJ
      Models for the ballistic impact of fabric armour

      INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
    15. Washington, JW; Cameron, BA
      Evaluating degradation rates of chlorinated organics in groundwater using analytical models

      ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY
    16. Ozaki, A; Watanabe, T; Hayashi, T; Ryu, Y
      Systematic analysis on combined heat and water transfer through porous materials based on thermodynamic energy

      ENERGY AND BUILDINGS
    17. Gomez, JA; Giraldez, JV; Fereres, E
      Rainfall interception by olive trees in relation to leaf area

      AGRICULTURAL WATER MANAGEMENT
    18. Roy, N; Godiwalla, KM; Chaudhuri, S; Ray, AK
      Simulation of bond coat properties in thermal barrier coatings during bending

      HIGH TEMPERATURE MATERIALS AND PROCESSES
    19. Kwon, JT; Ahn, YC; Kim, MH
      A modeling of in-tube condensation heat transfer for a turbulent annular film flow with liquid entrainment

      INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
    20. Sutter, JP; Kahn, ML; Mortl, KP; Ballou, R; Porcher, P
      Experimental and analytical insight into the exchange interaction involving paramagnetic f ions

      POLYHEDRON
    21. Carbajal, N; Montano, Y
      Comparison between predicted and observed physical features of sandbanks

      ESTUARINE COASTAL AND SHELF SCIENCE
    22. Laouami, N; Labbe, P
      Analytical approach for evaluation of the seismic ground motion coherency function

      SOIL DYNAMICS AND EARTHQUAKE ENGINEERING
    23. Mistou, S; Karama, M; Sabarots, M
      Experimental and numerical simulations of the static behaviour of orthotropic plates

      MEASUREMENT
    24. Eccleston, W
      Carrier generation and current flow at the interface between polysilicon and an SiO2 gate dielectric

      MICROELECTRONIC ENGINEERING
    25. Kalra, E; Kumar, A; Haldar, S; Gupta, RS
      A semi-empirical approach to analyze small geometry effects in LDD MOSFETs

      MICROELECTRONIC ENGINEERING
    26. den Otter, MW; Boukamp, BA; Bouwmeester, HJM
      Theory of oxygen isotope exchange

      SOLID STATE IONICS
    27. Marsan, MA; Gaeta, R; Meo, M
      Accurate approximate analysis of cell-based switch architectures

      PERFORMANCE EVALUATION
    28. Lawrence, J; Peligrad, AA; Zhou, E; Li, L; Morton, D
      Prediction of melt depth in selected architectural materials during high-power diode laser treatment

      OPTICS AND LASERS IN ENGINEERING
    29. Mwafy, AM; Elnashai, AS
      Static pushover versus dynamic collapse analysis of RC buildings

      ENGINEERING STRUCTURES
    30. Kwak, HG; Kim, SP
      Bond-slip behavior under monotonic uniaxial loads

      ENGINEERING STRUCTURES
    31. Shen, G; Cheng, TH; Bose, SK; Lu, C; Chai, TY; Hosseini, HMM
      Approximate analysis of limited-range wavelength conversion all-optical WDM networks

      COMPUTER COMMUNICATIONS
    32. Spies, L; Bortfeld, T
      Analytical scatter kernels for portal imaging at 6 MV

      MEDICAL PHYSICS
    33. Ming, Y; Que, PW
      Performances estimation of a rotary traveling wave ultrasonic motor based on two-dimension analytical model

      ULTRASONICS
    34. Colalongo, L
      A new analytical model for amorphous-silicon thin-film transistors including tail and deep states

      SOLID-STATE ELECTRONICS
    35. Torsi, L; Cioffi, N; Di Franco, C; Sabbatini, L; Zambonin, PG; Bleve-Zacheo, T
      Organic thin film transistors: from active materials to novel applications

      SOLID-STATE ELECTRONICS
    36. Ma, YT; Li, ZJ; Liu, LT; Yu, ZP
      Comprehensive analytical physical model of quantized inversion layer in MOS structure

      SOLID-STATE ELECTRONICS
    37. Henkel, I; Feiler, W; Kostka, A
      A two dimensional analytical model for the current distribution in a lateral IGBT

      SOLID-STATE ELECTRONICS
    38. Ma, PX; Linder, M; Sanden, M; Zhang, SL; Ostling, M; Chang, MCF
      An analytical model for space-charge region capacitance based on practicaldoping profiles under any bias conditions

      SOLID-STATE ELECTRONICS
    39. Peligrad, AA; Zhou, E; Morton, D; Li, L
      A melt depth prediction model for quality control of laser surface glazingof inhomogeneous materials

      OPTICS AND LASER TECHNOLOGY
    40. Strollo, AGM; Napoli, E
      Power superjunction devices: an analytic model for breakdown voltage

      MICROELECTRONICS JOURNAL
    41. Lacan, J; Michel, CJ
      Analysis of a circular code model

      JOURNAL OF THEORETICAL BIOLOGY
    42. Kuusk, A
      A two-layer canopy reflectance model

      JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER
    43. van Dijk, AIJM; Bruijnzeel, LA
      Modelling rainfall interception by vegetation of variable density using anadapted analytical model. Part 2. Model validation for a tropical upland mixed cropping system

      JOURNAL OF HYDROLOGY
    44. Wang, HH
      Analytical models of atherosclerosis

      ATHEROSCLEROSIS
    45. Schon, JH; Batlogg, B
      Trapping in organic field-effect transistors

      JOURNAL OF APPLIED PHYSICS
    46. Kim, HS; Al-Hassani, STS
      A morphological elastic model of general hexagonal columnar structures

      INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
    47. Marinov, VR
      Hybrid analytical-numerical solution for the shear angle in orthogonal metal cutting - Part I: theoretical foundation

      INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
    48. Marinov, VR
      Hybrid analytical-numerical solution for the sheer angle in orthogonal metal cutting - Part II: experimental verification

      INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
    49. Kim, HS; Al-Hassani, STS
      Plastic collapse of cellular structures comprised of doubly tapered struts

      INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
    50. Chopra, S; Gupta, RS
      Cut-off frequency and transit time analysis in short geometry polysilicon thin-film transistors

      INTERNATIONAL JOURNAL OF ELECTRONICS
    51. Chillet, C; Voyant, JY
      Design-oriented analytical study of a linear electromagnetic actuator by means of a reluctance network

      IEEE TRANSACTIONS ON MAGNETICS
    52. Uryukov, BA
      The path of overcoming the velocity skin-effect in rail accelerators

      IEEE TRANSACTIONS ON MAGNETICS
    53. Strollo, AGM; Napoli, E
      Optimal ON-resistance versus breakdown voltage tradeoff in superjunction power devices: A novel analytical model

      IEEE TRANSACTIONS ON ELECTRON DEVICES
    54. Bolster, CH; Genereux, DP; Saiers, JE
      Determination of specific yield for the Biscayne Aquifer with a canal-drawdown test

      GROUND WATER
    55. Bergado, DT; Voottipruex, P; Srikongsri, A; Teerawattanasuk, C
      Analytical model of interaction between hexagonal wire mesh and silty sandbackfill

      CANADIAN GEOTECHNICAL JOURNAL
    56. Velu, G; Legrand, C; Tharaud, O; Chapoton, A; Remiens, D; Horowitz, G
      Low driving voltages and memory effect in organic thin-film transistors with a ferroelectric gate insulator

      APPLIED PHYSICS LETTERS
    57. Mistou, S; Sabarots, M; Karama, M
      Numerical and experimental simulations of the dynamic behaviour of orthotropic plates

      PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
    58. Kim, Y; Han, TD; Kim, SD
      Impact of the memory interface structure in the memory-processor integrated architecture for computer vision

      JOURNAL OF SYSTEMS ARCHITECTURE
    59. Liang, SY; Wong, TN; Nathan, GK
      Comparison of one-dimensional and two-dimensional models for wet-surface fin efficiency of a plate-fin-tube heat exchanger

      APPLIED THERMAL ENGINEERING
    60. Srinivasan, S; Gross, TS
      Canalicular fluid flow induced by bending of a long bone

      MEDICAL ENGINEERING & PHYSICS
    61. Goncharov, VN; Skupsky, S; Boehly, TR; Knauer, JP; McKenty, P; Smalyuk, VA; Town, RPJ; Gotchev, OV; Betti, R; Meyerhofer, DD
      A model of laser imprinting

      PHYSICS OF PLASMAS
    62. Hamoui, AA; Rumin, NC
      An analytical model for current, delay, and power analysis of submicron CMOS logic circuits

      IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-ANALOG AND DIGITAL SIGNAL PROCESSING
    63. Gupta, R; Hero, AO
      Power versus performance tradeoffs for reduced resolution LMS adaptive filters

      IEEE TRANSACTIONS ON SIGNAL PROCESSING
    64. Leutenegger, ST; Lopez, MA
      The effect of buffering on the performance of R-trees

      IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING
    65. Schmidt, FM; Rodriguez-Villa, A; Agassant, F; Bellet, M
      Analytical models for the inflation of a polymeric tube

      EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
    66. Folch, A; Fernandez, J; Rundle, JB; Marti, J
      Ground deformation in a viscoelastic medium composed of a layer overlying a half-space: a comparison between point and extended sources

      GEOPHYSICAL JOURNAL INTERNATIONAL
    67. Lee, Y; Choi, S; Kim, YH
      Mathematical model and experimental validation of surface profile of a workpiece in round-oval-round pass sequence

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    68. Kyrsanidi, AK; Kermanidis, TB; Pantelakis, SG
      An analytical model for the prediction of distortions caused by the laser forming process

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    69. Carleer, B; van der Kevie, G; de Winter, L; van Veldhuizen, B
      Analysis of the effect of material properties on the hydroforming process of tubes

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    70. Li, HW; Li, ZC; Min, YH
      Reduction of number of paths to be tested in delay testing

      JOURNAL OF ELECTRONIC TESTING-THEORY AND APPLICATIONS
    71. Thandavamoorthy, TS
      Investigations on internally ring-stiffened joints of offshore platforms

      JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME
    72. Dimla, DE
      Sensor signals for tool-wear monitoring in metal cutting operations - a review of methods

      INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
    73. Vecchio, FJ
      Analysis of shear-critical reinforced concrete beams

      ACI STRUCTURAL JOURNAL
    74. Gorgette, FA; Lachaume, J; Grady, WM
      Statistical summation of the harmonic currents produced by a large number of single phase variable speed air conditioners: A study of three specific designs

      IEEE TRANSACTIONS ON POWER DELIVERY
    75. Xiao, QF; McPherson, EG; Ustin, SL; Grismer, ME; Simpson, JR
      Winter rainfall interception by two mature open-grown trees in Davis, California

      HYDROLOGICAL PROCESSES
    76. Crockford, RH; Richardson, DP
      Partitioning of rainfall into throughfall, stemflow and interception: effect of forest type, ground cover and climate

      HYDROLOGICAL PROCESSES
    77. Thieler, ER; Pilkey, OH; Young, RS; Bush, DM; Chai, F
      The use of mathematical models to predict beach behavior for US coastal engineering: A critical review

      JOURNAL OF COASTAL RESEARCH
    78. Vosniakos, G; Papapanagiotou, P
      Multiple tool path planning for NC machining of convex pockets without islands

      ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
    79. Deam, RT; Dayal, AR
      Analytical model of a plasma reactor

      PLASMA CHEMISTRY AND PLASMA PROCESSING
    80. Ewins, DJ
      Adjustment or updating of models

      SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
    81. Fernandez, MJ; Lyngfelt, A; Steenari, BM
      Reaction between limestone and SO2 under conditions alternating between oxidising and reducing. The effect of the SO2 concentration

      JOURNAL OF THE INSTITUTE OF ENERGY
    82. Jaspart, JP
      General report: session on connections

      JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
    83. Shen, J; Astaneh-Asl, A
      Hysteresis model of bolted-angle connections

      JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
    84. Bohdal, T
      Bubbly boiling of environment-friendly refrigerating media

      INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
    85. Iizuka, M
      A macroscopic model for predicting large-deformation behaviors of laminated rubber bearings

      ENGINEERING STRUCTURES
    86. Niwa, N; Kobori, T; Takahashi, M; Midorikawa, H; Kurata, N; Mizuno, T
      Dynamic loading test and simulation analysis of full-scale semi-active hydraulic damper for structural control

      EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS
    87. Kwak, HG; Seo, YJ
      Long-term behavior of composite girder bridges

      COMPUTERS & STRUCTURES
    88. Schellekens, J; Bruijnzeel, LA; Scatena, FN; Bink, NJ; Holwerda, F
      Evaporation from a tropical rain forest, Luquillo Experimental Forest, eastern Puerto Rico

      WATER RESOURCES RESEARCH
    89. Di Donato, G; Vermeersen, LLA; Sabadini, R
      Sea-level changes, geoid and gravity anomalies due to Pleistocene deglaciation by means of multilayered, analytical Earth models

      TECTONOPHYSICS
    90. Angelis, CT; Dimitriadis, CA; Farmakis, FV; Brini, J; Kamarinos, G; Miyasaka, M; Stoemenos, I
      Transconductance of large grain excimer laser-annealed polycrystalline silicon thin film transistors

      SOLID-STATE ELECTRONICS
    91. Rinaldi, N
      Thermal analysis of solid-state devices and circuits: an analytical approach

      SOLID-STATE ELECTRONICS
    92. Han, SY; Kim, HW; Chung, SK
      Surface field distribution and breakdown voltage of RESURF LDMOSFETs

      MICROELECTRONICS JOURNAL
    93. Rajendran, K; Samudra, G
      A simple modelling of device speed in double-gate SOI MOSFETs

      MICROELECTRONICS JOURNAL
    94. Briehl, B; Urbassek, HM
      Presheath dynamics induced by sudden electrode voltage jumps

      JOURNAL OF PHYSICS D-APPLIED PHYSICS
    95. Llorens, P; Gallart, F
      A simplified method for forest water storage capacity measurement

      JOURNAL OF HYDROLOGY
    96. Zeng, N; Shuttleworth, JW; Gash, JHC
      Influence of temporal variability of rainfall on interception loss. Part I. Point analysis

      JOURNAL OF HYDROLOGY
    97. Horowitz, G; Hajlaoui, ME; Hajlaoui, R
      Temperature and gate voltage dependence of hole mobility in polycrystalline oligothiophene thin film transistors

      JOURNAL OF APPLIED PHYSICS
    98. Fenton, A; Norman, R; Fairbairn, JP; Hudson, PJ
      Modelling the efficacy of entomopathogenic nematodes in the regulation of invertebrate pests in glasshouse crops

      JOURNAL OF APPLIED ECOLOGY
    99. Nourdine, A; Kedous-Lebouc, A; Meunier, G; Chevalier, T
      A chemical reaction hysteresis model for magnetic materials

      IEEE TRANSACTIONS ON MAGNETICS
    100. Cheng, M; Chau, KT; Chan, CC; Zhou, E; Huang, X
      Nonlinear varying-network magnetic circuit analysis for doubly salient permanent-magnet motors

      IEEE TRANSACTIONS ON MAGNETICS


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 22/10/20 alle ore 20:48:28