Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where soggetti phrase all words 'ALUMINUM COMPOSITES' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 171 riferimenti
Si mostrano 100 riferimenti a partire da 1
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Lu, L; Lai, MO; Su, Y; Teo, HL; Feng, CF
      In situ TiB2 reinforced Al alloy composites

      SCRIPTA MATERIALIA
    2. Pandey, AB; Majumbar, BS; Miracle, DB
      Laminated particulate-reinforced aluminum composites with improved toughness

      ACTA MATERIALIA
    3. Chung, DDL
      Materials for thermal conduction

      APPLIED THERMAL ENGINEERING
    4. Lee, JC; Ahn, JP; Shi, ZL; Shim, JH; Lee, HI
      Methodology to design the interfaces in SiC/Al composites

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    5. Watanabe, H; Mukai, T; Higashi, K
      Microstructural factors affecting superplastic properties in magnesium-based composites

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    6. Ma, ZY; Tjong, SC; Li, SX
      Creep behavior of TiBw/Ti in-situ composite fabricated by reactive hot pressing

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    7. Hemanth, J
      Production and mechanical properties (strength, wear, and fracture toughness) of chilled aluminum-quartz castable particulate composite

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    8. Sastry, S; Krishna, M; Uchil, J
      Effect of thermal stresses on the thermal expansion and damping behavior of ZA-27/aluminite metal matrix composites

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    9. Liden, E; Karlsson, S; Tokarz, B
      Silica sols as refractory fibre binders

      JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
    10. Ogel, B; Gurbuz, R
      Microstructural characterization and tensile properties of hot pressed Al-SiC composites prepared from pure Al and Cu powders

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    11. Zhang, F; Sun, PF; Li, XC; Zhang, GD
      An experimental study on deformation behavior below 0.2% offset yield stress in some SiCp/Al composites and their unreinforced matrix alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    12. Itou, S
      Stress intensity factors around a crack in a nonhomogeneous interfacial layer between two dissimilar elastic half-planes

      INTERNATIONAL JOURNAL OF FRACTURE
    13. Lim, SCV; Gupta, M; Lu, L
      Processing, microstructure, and properties of Mg-SiC composites synthesised using fluxless casting process

      MATERIALS SCIENCE AND TECHNOLOGY
    14. Tee, KL; Lu, L; Lai, MO
      In situ stir cast Al-TiB2 composite: processing and mechanical properties

      MATERIALS SCIENCE AND TECHNOLOGY
    15. Montanari, R; Sili, A; Costanza, G
      Improvement of the fatigue behaviour of Al 6061/20% SiCp composites by means of titanium coatings

      COMPOSITES SCIENCE AND TECHNOLOGY
    16. Stefanik, P; Kavecky, S; Sebo, P
      Galvanic deposition of Co-Mo layers and their influence on tensile strength of carbon fibers

      JOURNAL OF MATERIALS SCIENCE LETTERS
    17. Duwel, AHC; Mussert, KM; Janssen, M; Bakker, A; Van der Zwaag, S
      A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3

      JOURNAL OF MATERIALS SCIENCE LETTERS
    18. Bi, G; Wang, HW; Wu, RJ
      Mechanical property of in situ Al18B4O33 whisker reinforced AC8A composite

      JOURNAL OF MATERIALS SCIENCE LETTERS
    19. Riahi, AR; Alpas, AT
      The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites

      WEAR
    20. Peng, HX; Fan, Z; Evans, JRG
      Novel MMC microstructure with tailored distribution of the reinforcing phase

      JOURNAL OF MICROSCOPY-OXFORD
    21. Ding, HZ; Biermann, H; Mughrabi, H
      A statistical model of fatigue damage evolution in particulate-reinforced metal-matrix-composites

      FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
    22. McComb, DW; Ning, XG; Weatherly, GC; Pan, J; Lloyd, DJ
      Interfacial reaction chemistry in Al-based metal-matrix composites

      PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
    23. Kim, WJ; Sherby, OD
      Particle weakening in superplastic SiC/2124 Al composites at high temperature

      ACTA MATERIALIA
    24. Wakashima, K; Moriyama, T; Mori, T
      Steady-state creep of a particulate SiC/6061 Al composite

      ACTA MATERIALIA
    25. Chen, CY; Chao, CG
      Effect of particle-size distribution on the properties of high-volume-fraction SiCP-Al-based composites

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    26. Chen, ZY; Chen, YY; Shu, Q; An, GY; Li, D; Liu, YY
      Microstructure and properties of in situ Al/TiB2 composite fabricated by in-melt reaction method

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    27. Sharma, SC; Ramesh, A
      Effect of heat treatment on mechanical properties of particulate reinforced AI6061 composites

      JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    28. Mawsouf, NM
      A micromechanical mechanism of fracture initiation in discontinuously reinforced metal-matrix composite

      MATERIALS CHARACTERIZATION
    29. Jiang, GJ; Zhang, QX; Zhuang, HR; Li, WL; Li, MZ
      Studies of gravity behaviors in the course of producing AlN and TiC materials (III)

      ACTA PHYSICA SINICA
    30. Gui, MC; Kang, SB; Lee, JM
      Influence of porosity on dry sliding wear behavior in spray deposited Al-6CuMn/SiCp composite

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    31. Qian, LH; Wang, ZG; Toda, H; Kobayashi, T
      High temperature low cycle fatigue and thermo-mechanical fatigue of a 6061Al reinforced with SiCW

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    32. Smith, GW; Baxter, WJ; Sachdev, AK
      A calorimetric investigation of fiber/matrix reactions in fiber-reinforcedaluminum alloy 339

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    33. Zhang, JP; Laird, C
      Fatigue fracture of tungsten monofilament-reinforced monocrystalline copper matrix composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    34. Cadek, J; Kucharova, K; Zhu, SJ
      High temperature creep behaviour of an Al-8.5Fe-1.3V-1.7Si alloy reinforced with silicon carbide particulates

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    35. Nagendra, N; Jayaram, V
      Fracture and R-curves in high volume fraction Al2O3/Al composites

      JOURNAL OF MATERIALS RESEARCH
    36. Yoshikawa, N; Funahashi, S; Taniguchi, S; Kikuchi, A
      Fabrication and mechanical properties of Al/Al2O3 composite bodies by reactive infiltration of molten Al into SiO2 preform

      JOURNAL OF MATERIALS RESEARCH
    37. Peng, HX; Fan, Z; Evans, JRG
      Novel MMC microstructures prepared by melt infiltration of reticulated ceramic preforms

      MATERIALS SCIENCE AND TECHNOLOGY
    38. Velasco, F; Da Costa, CE; Rodero, B; Santamarta, C; Torralba, JM
      Intergranular corrosion resistance of Fe3Al/2014 Al particulate MMC

      JOURNAL OF MATERIALS SCIENCE LETTERS
    39. Wu, JM; Li, ZZ
      Contributions of the particulate reinforcement to dry sliding wear resistance of rapidly solidified Al-Ti alloys

      WEAR
    40. Tee, KL; Lu, L; Lai, MO
      Wear performance of in-situ Al-TiB2 composite

      WEAR
    41. Staia, MH; Cruz, M; Dahotre, NB
      Microstructural and tribological characterization of an A-356 aluminum alloy superficially modified by laser alloying

      THIN SOLID FILMS
    42. Bialo, D; Zhou, J; Duszczyk, J
      The tribological characteristics of the Al-20Si-3Cu-1Mg alloy reinforced with Al2O3 particles in relation to the hardness of a mating steel

      JOURNAL OF MATERIALS SCIENCE
    43. Kim, WJ; Hong, SH
      High-strain-rate superplastic deformation behavior of a powder metallurgy-processed 2124 Al alloy

      JOURNAL OF MATERIALS SCIENCE
    44. Feng, CF; Froyen, L
      In-situ P/M Al/(ZrB2+Al2O3) MMCs: Processing, microstructure and mechanical characterization

      ACTA MATERIALIA
    45. Li, M; Ghosh, S; Richmond, O
      An experimental-computational approach to the investigation of damage evolution in discontinuously reinforced aluminum matrix composite

      ACTA MATERIALIA
    46. Saravanan, RA; Lee, JM; Kang, SB
      Dry sliding wear behavior of A356-15 pct SiCp composites under controlled atmospheric conditions

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    47. Bystricky, P; Bjerregard, H; Mortensen, A
      Plasticity of continuous fiber-reinforced metals

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    48. Gupta, M; Ling, S
      Microstructure and mechanical properties of hypo/hyper-eutectic Al-Si alloys synthesized using a near-net shape forming technique

      JOURNAL OF ALLOYS AND COMPOUNDS
    49. Quan, YM; Zhou, ZH; Ye, BY
      Cutting process and chip appearance of aluminum matrix composites reinforced by SiC particle

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    50. Cadek, J; Kucharova, K; Zhu, SJ
      Creep behaviour of an oxide dispersion strengthened Al-5Mg alloy reinforced by silicon carbide particulates - an oxide dispersion strengthened Al-5Mg-30SiC(p) composite

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    51. Nagendra, N; Rao, BS; Jayaram, V
      Microstructures and properties of Al2O3/Al-AlN composites by pressureless infiltration of Al-alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    52. Ma, ZY; Tjong, SC; Wang, ZG
      Cyclic and static creep behavior of Al-Cu alloy composite reinforced with in-situ Al2O3 and TiB2 particulates

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    53. Tu, JP; Pan, J; Zhao, HX; Fukunaga, H
      Slurry erosion resistance of Al18B4O33 whisker-reinforced AC4C Al alloy matrix composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    54. Baron, RP; Jones, C; Wawner, FE; Wert, JA
      Mechanical properties of aluminum matrix composites reinforced with sintered ferrous compacts

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    55. Ejiofor, JU; Reddy, RG
      Characterization of pressure-assisted sintered Al-Si composites

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    56. Cao, GH; Wu, SQ; Liu, JM; Liu, ZG
      Wear-resistance mechanism of an Al-12Si alloy reinforced with aluminosilicate short fibers

      TRIBOLOGY INTERNATIONAL
    57. Peng, LM; Zhu, SJ; Ma, ZY; Bi, J; Chen, HR; Wang, FG
      The effect of Si3N4 whiskers on the high-temperature creep behavior of an Al-Fe-V-Si alloy matrix composite

      COMPOSITES SCIENCE AND TECHNOLOGY
    58. Han, NL; Wang, ZG; Zhang, GD; Lui, L
      Effect of reinforcement on cyclic stress response of a particulate SiC/Al composite

      MATERIALS LETTERS
    59. Luo, X; Qian, GF; Wang, EG; Chen, CF
      Molecular-dynamics simulation of Al/SiC interface structures

      PHYSICAL REVIEW B-CONDENSED MATTER
    60. Al-Rubaie, KS; Yoshimura, HN; de Mello, JDB
      Two-body abrasive wear of Al-SiC composites

      WEAR
    61. Sharma, SC; Girish, BM; Somashekar, DR; Satish, BM; Kamath, R
      Sliding wear behaviour of zircon particles reinforced ZA-27 alloy composite materials

      WEAR
    62. Gupta, M; Lu, L; Lai, MO; Lee, KH
      Microstructure and mechanical properties of elemental and reinforced magnesium synthesized using a fluxless liquid-phase process

      MATERIALS RESEARCH BULLETIN
    63. Birol, Y
      In situ processing of TiCp-Al composites by reacting graphite with Al-Ti melts

      JOURNAL OF MATERIALS SCIENCE
    64. Zhou, J; Duszczyk, J
      Preparation of Al-20Si-4.5Cu alloy and its composite from elemental powders

      JOURNAL OF MATERIALS SCIENCE
    65. Bertolini, L; Brunella, MF; Candiani, S
      Corrosion behavior of a particulate metal-matrix composite

      CORROSION
    66. LIN CB; LEU CE; LEE EC
      MANUFACTURING AND RECYCLING OF A380AL SIC(P) COMPOSITES/

      Journal of materials engineering and performance
    67. ELBARADIE ZM; ELSHAHAT OA; ABDELAZIM AN
      ACCELERATED AGING PROCESSES IN SIC-7020 ALUMINUM COMPOSITE

      Journal of materials processing technology
    68. BORREGO A; GONZALEZDONCEL G
      ANALYSIS OF THE PRECIPITATION BEHAVIOR IN ALUMINUM-MATRIX COMPOSITES FROM A JOHNSON-MEHL-AVRAMI KINETIC-MODEL

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    69. PAGOUNIS E; LINDROOS VK
      PROCESSING AND PROPERTIES OF PARTICULATE-REINFORCED STEEL MATRIX COMPOSITES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    70. CADEK J; PAHUTOVA M; SUSTEK V
      CREEP-BEHAVIOR OF A 2124 AL-ALLOY REINFORCED BY 20 VOL.PERCENT SILICON-CARBIDE PARTICULATES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    71. KIM JY; KIM SY; KIM YS
      FUNCTIONALLY GRADED REACTION LAYERS PRODUCED BY DIRECTED METAL OXIDATION PROCESS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    72. IP SW; SRIDHAR R; TOGURI JM; STEPHENSON TF; WARNER AEM
      WETTABILITY OF NICKEL COATED GRAPHITE BY ALUMINUM

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    73. EJIOFOR JU; REDDY RG
      INTERFACES AND PROPERTIES OF AL-SI ALLOY ZIRCON PARTICULATE COMPOSITES

      Journal of materials research
    74. GUPTA M
      EFFECT OF PRECIPITATION ON THE BULK HARDNESS AND THE ULTIMATE TENSILE-STRENGTH OF A 6061 SIC COMPOSITE/

      High-temperature materials and processes
    75. KO BC; YOO YC
      HOT-DEFORMATION BEHAVIOR OF AA2124 COMPOSITES REINFORCED WITH BOTH PARTICLES AND WHISKERS OF SIC

      Composites science and technology
    76. SHEE SK; PRADHAN SK; DE M
      EFFECT OF THERMAL-STRESS ON THE MICROSTRUCTURES OF ALUMINUM METAL-MATRIX COMPOSITES

      Materials chemistry and physics
    77. MONDAL DP; DAS S; PRASAD BK
      STUDY OF EROSIVE-CORROSIVE WEAR CHARACTERISTICS OF AN ALUMINUM-ALLOY COMPOSITE THROUGH FACTORIAL DESIGN OF EXPERIMENTS

      Wear
    78. SAHIN Y; MURPHY S
      THE EFFECTS OF SLIDING SPEED AND MICROSTRUCTURE ON THE DRY WEAR PROPERTIES OF METAL-MATRIX COMPOSITES

      Wear
    79. DEUIS RL; SUBRAMANIAN C; YELLUP JM
      3-BODY ABRASIVE WEAR OF COMPOSITE COATINGS IN DRY AND WET ENVIRONMENTS

      Wear
    80. Tu, JP; Pan, J; Matsumura, M; Fukunaga, H
      The solid particle erosion behavior of Al18B4O33 whisker-reinforced AC4C al alloy matrix composites

      WEAR
    81. Sahin, Y
      Wear behaviour of planar-random fibre-reinforced metal matrix composites

      WEAR
    82. ASTHANA R
      REINFORCED CAST METALS - PART II EVOLUTION OF THE INTERFACE

      Journal of Materials Science
    83. Hashimoto, S; Yamaguchi, A; Yasuda, M
      Fabrication and properties of novel composites in the system Al-Zr-C

      JOURNAL OF MATERIALS SCIENCE
    84. JI SC; ZHU ZM; WANG ZC
      RELATIONSHIP BETWEEN JOINT SPACING AND BED THICKNESS IN SEDIMENTARY-ROCKS - EFFECTS OF INTERBED SLIP

      Geological Magazine
    85. FAHRENHOLTZ WG; EWSUK KG; LOEHMAN RE
      KINETICS OF CERAMIC-METAL COMPOSITE FORMATION BY REACTIVE METAL PENETRATION

      Journal of the American Ceramic Society
    86. BARTOLOME JF; REQUENA J; MOYA JS; LI M; GUIU F
      CYCLIC FATIGUE OF AL2O3 AND AL2O3-AL2TIO5 COMPOSITES IN DIRECT PUSH-PULL

      Fatigue & fracture of engineering materials & structures
    87. CHEN AS; BUSHBY RS; SCOTT VD
      DEFORMATION AND DAMAGE MECHANISMS IN FIBER-REINFORCED ALUMINUM-ALLOY COMPOSITES UNDER TENSION

      Composites. Part A, Applied science and manufacturing
    88. LIU PL; WANG ZG; TODA H; KOBAYASHI T
      EFFECT OF CYCLIC STRESS ON THE HIGH-TEMPERATURE CREEP-BEHAVIOR OF SICW 6061AL COMPOSITE/

      Scripta materialia
    89. HAN BQ; CHAN KC
      HIGH-STRAIN-RATE SUPERPLASTICITY OF AN AL6061-SICW COMPOSITE

      Scripta materialia
    90. GU MY; ZHANG GD; WU RJ
      INTERFACIAL BONDINGS IN GR(F) AL COMPOSITES

      Progress in Natural Science
    91. DESANCTIS AM; FORCELLESE A; ROBERTS SM; WITHERS PJ
      FRICTIONAL BEHAVIOR OF AL359 SIC/20P COMPOSITE UNDER ISOTHERMAL AND NONISOTHERMAL HOT-WORKING CONDITIONS AS A FUNCTION OF SURFACE-ROUGHNESS/

      Journal of materials processing technology
    92. DANIEL BSS; MURTHY VSR; MURTY GS
      METAL-CERAMIC COMPOSITES VIA IN-SITU METHODS

      Journal of materials processing technology
    93. DEPPISCH C; LIU G; SHANG JK; ECONOMY J
      PROCESSING AND MECHANICAL-PROPERTIES OF ALB2 FLAKE REINFORCED AL-ALLOY COMPOSITES

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    94. IMAI T; KOJIMA S; JIANG D
      HIGH-STRAIN RATE SUPERPLASTICITY OF SICP 1100 AND SICP/1N90 P/M PURE ALUMINUM COMPOSITES/

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    95. MABUCHI M; IWASAKI H; JEONG HG; HIRAGA K; HIGASHI K
      CRITICAL ASSESSMENTS OF ACCOMMODATION PROCESS BY LIQUID-PHASE FOR SUPERPLASTIC FLOW IN SI3N4 AL-MG-SI METAL-MATRIX COMPOSITES/

      Journal of materials research
    96. BAI MW; XUE QJ
      INVESTIGATION OF WEAR MECHANISM OF SIC PARTICULATE-REINFORCED AL-20SI-3CU-1MG ALUMINUM-MATRIX COMPOSITES UNDER DRY SLIDING AND WATER LUBRICATION

      Tribology international
    97. LIU PL; WANG ZG; WANG WL
      STATIC AND CYCLIC CREEP-BEHAVIOR OF 2024 SICP AND ITS MATRIX ALLOY ATHIGH-TEMPERATURE/

      Materials science and technology
    98. COCEN U; ONEL K; OZDEMIR I
      MICROSTRUCTURES AND AGE HARDENABILITY OF AL-5-PERCENT-SI-0.2-PERCENT-MG BASED COMPOSITES REINFORCED WITH PARTICULATE SIC

      Composites science and technology
    99. YOSHIKAWA N; WATANABE Y; VELLOZA ZM; TANIGUCHI S; KIKUCHI A
      MECHANICAL-PROPERTIES OF AL AL2O3 COMPOSITES FABRICATED BY REACTION BETWEEN SIO2 AND MOLTEN AL,AL-CU/

      Journal of materials science letters
    100. LANDI E; CESCHINI L
      REACTION INTERFACES OF NICALON FIBER ALUMINUM COMPOSITE SYSTEMS - THEINFLUENCE OF FIBER PRETREATMENTS AND MATRIX COMPOSITION/

      Materials chemistry and physics


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 26/10/20 alle ore 04:45:29