Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Perez, P; Perez, FJ; Gomez, C; Adeva, P
   Oxidation behaviour of an austenitic Fe-30Mn-5Al-0.5C alloy
   CORROSION SCIENCE
   
   P. Perez et al., "Oxidation behaviour of an austenitic Fe-30Mn-5Al-0.5C alloy", CORROS SCI, 44(1), 2002, pp. 113-127
2. Ali, MR; Nishikata, A; Tsuru, T
   Electrodeposition of Al-Ni intermetallic compounds from aluminum chloride-N-(n-butyl)pyridinium chloride room temperature molten salt
   JOURNAL OF ELECTROANALYTICAL CHEMISTRY
   
   M.R. Ali et al., "Electrodeposition of Al-Ni intermetallic compounds from aluminum chloride-N-(n-butyl)pyridinium chloride room temperature molten salt", J ELEC CHEM, 513(2), 2001, pp. 111-118
3. Sinning, HR; Steckler, G; Scarfone, R
   Mechanical damping by hydrogen diffusion in intermetallic compounds
   ADVANCED ENGINEERING MATERIALS
   
   H.R. Sinning et al., "Mechanical damping by hydrogen diffusion in intermetallic compounds", ADV ENG MAT, 3(9), 2001, pp. 706-711
4. Epicier, T; Cheynet, MC; Martin, JM
   Nano-scale analytical characterization of engineering materials by transmission electron microscopy
   ADVANCED ENGINEERING MATERIALS
   
   T. Epicier et al., "Nano-scale analytical characterization of engineering materials by transmission electron microscopy", ADV ENG MAT, 3(8), 2001, pp. 612-615
5. Kurz, W
   Solidification microstructure processing maps: Theory and application
   ADVANCED ENGINEERING MATERIALS
   
   W. Kurz, "Solidification microstructure processing maps: Theory and application", ADV ENG MAT, 3(7), 2001, pp. 443-452
6. Varschavsky, A; Donoso, E
   Short-range-ordering kinetics of Cu-5 at. % Zn influenced by solute-vacancy complexes and cold rolling
   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
   
   A. Varschavsky e E. Donoso, "Short-range-ordering kinetics of Cu-5 at. % Zn influenced by solute-vacancy complexes and cold rolling", J THERM ANA, 65(1), 2001, pp. 185-195
7. Chen, SH; Schumacher, G; Mukherji, D; Frohberg, G; Wahi, RP
   The effect of local composition on defect structure in a near-gamma-TiAl alloy with duplex microstructure
   PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS ANDMECHANICAL PROPERTIES
   
   S.H. Chen et al., "The effect of local composition on defect structure in a near-gamma-TiAl alloy with duplex microstructure", PHIL MAG A, 81(11), 2001, pp. 2653-2664
8. Kuang, JP; Harding, RA; Campbell, J
   A study of refractories as crucible and mould materials for melting and casting gamma-TiAl alloys
   INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
   
   J.P. Kuang et al., "A study of refractories as crucible and mould materials for melting and casting gamma-TiAl alloys", INT J CAST, 13(5), 2001, pp. 277-292
9. Mizera, J; Kurzydlowski, KJ
   On the anisotropy of the Portevin-Le Chatelier plastic instabilities in Al-Li-Cu-Zr alloy
   SCRIPTA MATERIALIA
   
   J. Mizera e K.J. Kurzydlowski, "On the anisotropy of the Portevin-Le Chatelier plastic instabilities in Al-Li-Cu-Zr alloy", SCR MATER, 45(7), 2001, pp. 801-806
10. Yang, B; Wang, F; Zhang, JS; Xiong, BQ; Duan, XJ
    The effect of Mn on the microstructure of spray-deposited Al-20Si-5Fe-3Cu-1Mg alloy
    SCRIPTA MATERIALIA
    
    B. Yang et al., "The effect of Mn on the microstructure of spray-deposited Al-20Si-5Fe-3Cu-1Mg alloy", SCR MATER, 45(5), 2001, pp. 509-515
11. Jones, H
    A comparison with model predictions of coupled zone derived growth parameters for primary alpha Al and beta Si dendrites in hypereutectic Al-Si alloys
    SCRIPTA MATERIALIA
    
    H. Jones, "A comparison with model predictions of coupled zone derived growth parameters for primary alpha Al and beta Si dendrites in hypereutectic Al-Si alloys", SCR MATER, 45(2), 2001, pp. 177-182
12. Jones, H
    On array model theoretical calculations versus measurements for the growthundercooling of aluminide dendrites in Bridgman solidified aluminium alloys
    SCRIPTA MATERIALIA
    
    H. Jones, "On array model theoretical calculations versus measurements for the growthundercooling of aluminide dendrites in Bridgman solidified aluminium alloys", SCR MATER, 45(1), 2001, pp. 95-101
13. Eckert, J; Kuhn, U; Mattern, N; Reger-Leonhard, A; Heilmaier, M
    Bulk nanostructured Zr-based multiphase alloys with high strength and goodductility
    SCRIPTA MATERIALIA
    
    J. Eckert et al., "Bulk nanostructured Zr-based multiphase alloys with high strength and goodductility", SCR MATER, 44(8-9), 2001, pp. 1587-1590
14. Konno, TJ; Hiraga, K; Kawasaki, M
    Guinier-Preston (GP) zone revisited: Atomic level observation by HAADF-TEMtechnique
    SCRIPTA MATERIALIA
    
    T.J. Konno et al., "Guinier-Preston (GP) zone revisited: Atomic level observation by HAADF-TEMtechnique", SCR MATER, 44(8-9), 2001, pp. 2303-2307
15. Kong, HZ; Li, Y; Ding, J
    Magnetic hardening in amorphous alloy Sm60Fe30Al10
    SCRIPTA MATERIALIA
    
    H.Z. Kong et al., "Magnetic hardening in amorphous alloy Sm60Fe30Al10", SCR MATER, 44(5), 2001, pp. 829-834
16. Dong, JX; Sawada, K; Yokokawa, K; Abe, F
    Internal nitridation behavior during long-term creep in a nickel-base superalloy
    SCRIPTA MATERIALIA
    
    J.X. Dong et al., "Internal nitridation behavior during long-term creep in a nickel-base superalloy", SCR MATER, 44(11), 2001, pp. 2641-2646
17. Barlow, IC; Jones, H; Rainforth, WM
    Evolution of microstructure and hardening, and the role of Al3Ti coarsening, during extended thermal treatment in mechanically alloyed Al-Ti-O based materials
    ACTA MATERIALIA
    
    I.C. Barlow et al., "Evolution of microstructure and hardening, and the role of Al3Ti coarsening, during extended thermal treatment in mechanically alloyed Al-Ti-O based materials", ACT MATER, 49(7), 2001, pp. 1209-1224
18. Bohn, R; Klassen, T; Bormann, R
    Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range
    ACTA MATERIALIA
    
    R. Bohn et al., "Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range", ACT MATER, 49(2), 2001, pp. 299-311
19. Murty, BS; Ping, DH; Ohnuma, M; Hono, K
    Nanoquasicrystalline phase formation in binary Zr-Pd and Zr-Pt alloys
    ACTA MATERIALIA
    
    B.S. Murty et al., "Nanoquasicrystalline phase formation in binary Zr-Pd and Zr-Pt alloys", ACT MATER, 49(17), 2001, pp. 3453-3462
20. Lynch, SP; Muddle, BC; Pasang, T
    Ductile-to-brittle fracture transitions in 8090 Al-Li alloys
    ACTA MATERIALIA
    
    S.P. Lynch et al., "Ductile-to-brittle fracture transitions in 8090 Al-Li alloys", ACT MATER, 49(15), 2001, pp. 2863-2874
21. Leo, PH; Lowengrub, JS; Nie, Q
    On an elastically induced splitting instability
    ACTA MATERIALIA
    
    P.H. Leo et al., "On an elastically induced splitting instability", ACT MATER, 49(14), 2001, pp. 2761-2772
22. Pang, L; Kumar, KS
    Complex faults in a B2 iron aluminide alloy
    ACTA MATERIALIA
    
    L. Pang e K.S. Kumar, "Complex faults in a B2 iron aluminide alloy", ACT MATER, 49(12), 2001, pp. 2215-2226
23. Perez-Prado, MT; Gonzalez-Doncel, G; Ruano, OA; McNelley, TR
    Texture analysis of the transition from slip to grain boundary sliding in a discontinuously recrystallized superplastic aluminum alloy
    ACTA MATERIALIA
    
    M.T. Perez-Prado et al., "Texture analysis of the transition from slip to grain boundary sliding in a discontinuously recrystallized superplastic aluminum alloy", ACT MATER, 49(12), 2001, pp. 2259-2268
24. Marquis, EA; Seidman, DN
    Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys
    ACTA MATERIALIA
    
    E.A. Marquis e D.N. Seidman, "Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys", ACT MATER, 49(11), 2001, pp. 1909-1919
25. Wen, YH; Wang, Y; Chen, LQ
    Influence of an applied strain field on microstructural evolution during the alpha(2) -> O-phase transformation in Ti-Al-Nb system
    ACTA MATERIALIA
    
    Y.H. Wen et al., "Influence of an applied strain field on microstructural evolution during the alpha(2) -> O-phase transformation in Ti-Al-Nb system", ACT MATER, 49(1), 2001, pp. 13-20
26. Ishihara, S; Inoue, A
    Superplastic deformation of supercooled liquid in Zr-based bulk glassy alloys containing nano-quasicrystalline particles
    MATERIALS TRANSACTIONS
    
    S. Ishihara e A. Inoue, "Superplastic deformation of supercooled liquid in Zr-based bulk glassy alloys containing nano-quasicrystalline particles", MATER TRANS, 42(8), 2001, pp. 1517-1522
27. Iwasaki, H; Kariya, R; Mabuchi, M; Tagata, T; Higashi, K
    Effects of temperature and strain rate on elongation at elevated temperature in Al-4.5Mg alloy
    MATERIALS TRANSACTIONS
    
    H. Iwasaki et al., "Effects of temperature and strain rate on elongation at elevated temperature in Al-4.5Mg alloy", MATER TRANS, 42(8), 2001, pp. 1771-1776
28. Kimura, A; Kondoh, K; Shibata, M; Watanabe, R
    Breakaway behavior of surface oxide film on aluminum-silicon-magnesium alloy powder particles at high temperature in a vacuum
    MATERIALS TRANSACTIONS
    
    A. Kimura et al., "Breakaway behavior of surface oxide film on aluminum-silicon-magnesium alloy powder particles at high temperature in a vacuum", MATER TRANS, 42(7), 2001, pp. 1373-1379
29. Nishino, Y
    Electronic structure and transport properties of pseudogap system Fe2VAl
    MATERIALS TRANSACTIONS
    
    Y. Nishino, "Electronic structure and transport properties of pseudogap system Fe2VAl", MATER TRANS, 42(6), 2001, pp. 902-910
30. Kong, HZ; Ding, J; Wang, L; Li, Y
    Bulk hard magnetic alloys in Nd-Fe-B system prepared by casting and melt spinning
    MATERIALS TRANSACTIONS
    
    H.Z. Kong et al., "Bulk hard magnetic alloys in Nd-Fe-B system prepared by casting and melt spinning", MATER TRANS, 42(4), 2001, pp. 674-677
31. Choi, SH; Barlat, F; Liu, J
    Effect of precipitates on plastic anisotropy for polycrystalline aluminum alloys
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    S.H. Choi et al., "Effect of precipitates on plastic anisotropy for polycrystalline aluminum alloys", MET MAT T A, 32(9), 2001, pp. 2239-2247
32. Taleff, EM; Nevland, PJ; Krajewski, PE
    Tensile ductility of several commercial aluminum alloys at elevated temperatures
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    
    E.M. Taleff et al., "Tensile ductility of several commercial aluminum alloys at elevated temperatures", MET MAT T A, 32(5), 2001, pp. 1119-1130
33. Zhang, J; He, L; Cui, Y; Ye, H
    Microstructural characteristics of Ti-48Al-2Cr alloy
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    J. Zhang et al., "Microstructural characteristics of Ti-48Al-2Cr alloy", J MAT ENG P, 10(3), 2001, pp. 378-389
34. McQueen, HJ; Fry, E; Belling, J
    Comparative constitutive constants for hot working of Al-4.4Mg-0.7Mn (AA5083)
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
    
    H.J. McQueen et al., "Comparative constitutive constants for hot working of Al-4.4Mg-0.7Mn (AA5083)", J MAT ENG P, 10(2), 2001, pp. 164-172
35. Cohen-Adad, MT; Laversenne, L; Gharbi, M; Goutaudier, C; Boulon, G; Cohen-Adad, R
    New combinatorial chemistry approach in material science
    JOURNAL OF PHASE EQUILIBRIA
    
    M.T. Cohen-Adad et al., "New combinatorial chemistry approach in material science", J PH EQUIL, 22(4), 2001, pp. 379-385
36. Hata, S; Hashimoto, T; Kuwano, A; Oki, K
    Microstructures of Ti50Al45MO5 alloy powders produced by plasma rotating electrode process
    JOURNAL OF PHASE EQUILIBRIA
    
    S. Hata et al., "Microstructures of Ti50Al45MO5 alloy powders produced by plasma rotating electrode process", J PH EQUIL, 22(4), 2001, pp. 386-393
37. Asta, M; Ozolins, V; Woodward, C
    A first-principles approach to modeling alloy phase equilibria
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    
    M. Asta et al., "A first-principles approach to modeling alloy phase equilibria", JOM-J MIN, 53(9), 2001, pp. 16-19
38. Nogita, K; Dahle, AK
    Eutectic solidification in hypoeutectic Al-Si alloys: electron backscatterdiffraction analysis
    MATERIALS CHARACTERIZATION
    
    K. Nogita e A.K. Dahle, "Eutectic solidification in hypoeutectic Al-Si alloys: electron backscatterdiffraction analysis", MATER CHAR, 46(4), 2001, pp. 305-310
39. Zhu, YH; Lee, WB; Yeung, CF; Yue, TM
    EBSD of Zn-rich phases in Zn-Al-based alloys
    MATERIALS CHARACTERIZATION
    
    Y.H. Zhu et al., "EBSD of Zn-rich phases in Zn-Al-based alloys", MATER CHAR, 46(1), 2001, pp. 19-23
40. Chen, QF; Cai, W; Zhao, LC
    Relationship between colored microstructure under polarized light and shape recovery characteristics on the thermomechanical cycled CuAlNi single crystals
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    
    Q.F. Chen et al., "Relationship between colored microstructure under polarized light and shape recovery characteristics on the thermomechanical cycled CuAlNi single crystals", J MAT SCI T, 17(5), 2001, pp. 485-489
41. He, G; Bian, Z; Chen, GL; Lu, J; Chen, DJ; Tu, GC; Chen, GJ; Hu, XJ
    Crystalline precipitate in a bulk glass forming Zr-based alloy and its effect on mechanical properties
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    
    G. He et al., "Crystalline precipitate in a bulk glass forming Zr-based alloy and its effect on mechanical properties", J MAT SCI T, 17(4), 2001, pp. 389-398
42. Wang, LM; Zheng, YF; Cai, W; Meng, XL; Zhao, LC
    Effect of thermal cycling under load on martensite transformation and two-way shape memory effect in a TiNi alloy
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    
    L.M. Wang et al., "Effect of thermal cycling under load on martensite transformation and two-way shape memory effect in a TiNi alloy", J MAT SCI T, 17(2), 2001, pp. 263-266
43. Huang, JC
    Recent achievements in developing low temperature and high strain rate superplastic materials
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    
    J.C. Huang, "Recent achievements in developing low temperature and high strain rate superplastic materials", J MAT SCI T, 17(1), 2001, pp. 19-20
44. Liu, YX; Sun, DS; Bian, XF; Xiao, LM; Geng, GL; Bai, YJ
    Defects in an as-quenched CuZnAlMnNi shape memory alloy
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
    
    Y.X. Liu et al., "Defects in an as-quenched CuZnAlMnNi shape memory alloy", J MAT SCI T, 17, 2001, pp. S177-S179
45. Yang, DH; He, DP
    Porosity of porous Al alloys
    SCIENCE IN CHINA SERIES B-CHEMISTRY
    
    D.H. Yang e D.P. He, "Porosity of porous Al alloys", SCI CHINA B, 44(4), 2001, pp. 411-418
46. Maloney, SK; Hono, K; Polmear, IJ; Ringer, SP
    The effects of a trace addition of silver upon elevated temperature ageingof an Al-Zn-Mg alloy
    MICRON
    
    S.K. Maloney et al., "The effects of a trace addition of silver upon elevated temperature ageingof an Al-Zn-Mg alloy", MICRON, 32(8), 2001, pp. 741-747
47. Sofyan, BT; Raviprasad, K; Ringer, SP
    Effects of microalloying with Cd and Ag on the precipitation process of Al-4Cu-0.3Mg (wt&) alloy at 200 degrees C
    MICRON
    
    B.T. Sofyan et al., "Effects of microalloying with Cd and Ag on the precipitation process of Al-4Cu-0.3Mg (wt&) alloy at 200 degrees C", MICRON, 32(8), 2001, pp. 851-856
48. Chan, CDN; Huvier, C; Dinhut, JF
    High temperature corrosion of some B2 iron aluminides
    INTERMETALLICS
    
    C.D.N. Chan et al., "High temperature corrosion of some B2 iron aluminides", INTERMETALL, 9(9), 2001, pp. 817-826
49. Izumi, T; Yoshioka, T; Hayashi, S; Narita, T
    Oxidation behavior of sulfidation processed TiAl-2 at. % X (X = V, Fe, Co,Cu, Nb, Mo, Ag and W) alloys at 1173 K in air
    INTERMETALLICS
    
    T. Izumi et al., "Oxidation behavior of sulfidation processed TiAl-2 at. % X (X = V, Fe, Co,Cu, Nb, Mo, Ag and W) alloys at 1173 K in air", INTERMETALL, 9(7), 2001, pp. 547-558
50. Murakami, T; Sasaki, S; Ichikawa, K; Kitahara, A
    Oxidation resistance of powder compacts of the Nb-Si-Cr system and Nb3Si5Al2 matrix compacts prepared by spark plasma sintering
    INTERMETALLICS
    
    T. Murakami et al., "Oxidation resistance of powder compacts of the Nb-Si-Cr system and Nb3Si5Al2 matrix compacts prepared by spark plasma sintering", INTERMETALL, 9(7), 2001, pp. 629-635
51. Chao, J; Morris, DG; Munoz-Morris, MA; Gonzalez-Carrasco, JL
    The influence of some microstructural and test parameters on the tensile behaviour and the ductility of a mechanically-alloyed Fe-40Al alloy
    INTERMETALLICS
    
    J. Chao et al., "The influence of some microstructural and test parameters on the tensile behaviour and the ductility of a mechanically-alloyed Fe-40Al alloy", INTERMETALL, 9(4), 2001, pp. 299-308
52. Misra, A; Gibala, R; Noebe, RD
    Optimization of toughness and strength in multiphase intermetallics
    INTERMETALLICS
    
    A. Misra et al., "Optimization of toughness and strength in multiphase intermetallics", INTERMETALL, 9(10-11), 2001, pp. 971-978
53. Wu, D; Baker, I
    The effect of environment and strain rate on the room temperature tensile properties of FeAl single crystals
    INTERMETALLICS
    
    D. Wu e I. Baker, "The effect of environment and strain rate on the room temperature tensile properties of FeAl single crystals", INTERMETALL, 9(1), 2001, pp. 57-65
54. Manna, I; Pabi, SK; Gust, W
    Discontinuous reactions in solids
    INTERNATIONAL MATERIALS REVIEWS
    
    I. Manna et al., "Discontinuous reactions in solids", INT MATER R, 46(2), 2001, pp. 53-91
55. Unlu, N; Genc, A; Ovecoglu, ML; Eruslu, N; Froes, FH
    Characterization investigations of melt-spun ternary Al-xSi-3.3Fe (x=10, 20 wt.%) alloys
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    N. Unlu et al., "Characterization investigations of melt-spun ternary Al-xSi-3.3Fe (x=10, 20 wt.%) alloys", J ALLOY COM, 322(1-2), 2001, pp. 249-256
56. Reddy, RG; Yahya, AM; Brewer, L
    Thermodynamic properties of Ti-Al intermetallics
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    R.G. Reddy et al., "Thermodynamic properties of Ti-Al intermetallics", J ALLOY COM, 321(2), 2001, pp. 223-227
57. Hamana, D; Bouchear, M; Betrouche, M; Derafa, A; Rokhmanov, NY
    Comparative study of formation and transformation of transition phases in Al-12 wt.% Mg alloy
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    D. Hamana et al., "Comparative study of formation and transformation of transition phases in Al-12 wt.% Mg alloy", J ALLOY COM, 320(1), 2001, pp. 93-102
58. Colinet, C; Pasturel, A
    Phase stability and electronic structure in ZrAl3 compound
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    C. Colinet e A. Pasturel, "Phase stability and electronic structure in ZrAl3 compound", J ALLOY COM, 319(1-2), 2001, pp. 154-161
59. Krasnowski, M; Matyja, H
    Structural investigations of the Al50Fe25Ti25 powder mixture mechanically alloyed under various conditions
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    M. Krasnowski e H. Matyja, "Structural investigations of the Al50Fe25Ti25 powder mixture mechanically alloyed under various conditions", J ALLOY COM, 319(1-2), 2001, pp. 296-302
60. Choi, JH; Moon, KI; Kim, JK; Oh, YM; Suh, JH; Kim, SJ
    Consolidation behavior of nanocrystalline Al-5at.%Ti alloys synthesized bycryogenic milling
    JOURNAL OF ALLOYS AND COMPOUNDS
    
    J.H. Choi et al., "Consolidation behavior of nanocrystalline Al-5at.%Ti alloys synthesized bycryogenic milling", J ALLOY COM, 315(1-2), 2001, pp. 178-186
61. So, H; Li, WC; Hsieh, HK
    Assessment of the powder extrusion of silicon-aluminium alloy
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    H. So et al., "Assessment of the powder extrusion of silicon-aluminium alloy", J MATER PR, 114(1), 2001, pp. 18-21
62. Date, PP; Padmanabhan, KA
    Deformation behaviour of sheets of three aerospace Al-alloys
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    
    P.P. Date e K.A. Padmanabhan, "Deformation behaviour of sheets of three aerospace Al-alloys", J MATER PR, 112(1), 2001, pp. 68-77
63. Conlon, KT; Wilkinson, DS
    Effect of particle distribution on deformation and damage of two-phase alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    K.T. Conlon e D.S. Wilkinson, "Effect of particle distribution on deformation and damage of two-phase alloys", MAT SCI E A, 317(1-2), 2001, pp. 108-114
64. Geng, H; Tian, XF; Cui, HW; Li, CD; Peng, Z
    Antifriction and wear behaviour of ZAS35 zinc alloy: influence of heat treatment and melting technique
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    H. Geng et al., "Antifriction and wear behaviour of ZAS35 zinc alloy: influence of heat treatment and melting technique", MAT SCI E A, 316(1-2), 2001, pp. 109-114
65. Mukhopadhyay, NK; Weatherly, GC; Embury, JD
    An analysis of microhardness of single-quasicrystals in the Al-Cu-Co-Si system
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    N.K. Mukhopadhyay et al., "An analysis of microhardness of single-quasicrystals in the Al-Cu-Co-Si system", MAT SCI E A, 315(1-2), 2001, pp. 202-210
66. Lei, CH; Xu, Q; Sun, YQ
    Phase orientation relationships in the TiAl-TiAl2 region
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    C.H. Lei et al., "Phase orientation relationships in the TiAl-TiAl2 region", MAT SCI E A, 313(1-2), 2001, pp. 227-236
67. Murty, BS; Hono, K
    Nanoquasicrystallization of Zr-based metallic glasses
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    B.S. Murty e K. Hono, "Nanoquasicrystallization of Zr-based metallic glasses", MAT SCI E A, 312(1-2), 2001, pp. 253-261
68. Sadi, FA; Servant, C; Cizeron, G
    Phase transformations in Ti-29.7Al-21.8Nb and Ti-23.4Al-31.7Nb (at.%) alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    F.A. Sadi et al., "Phase transformations in Ti-29.7Al-21.8Nb and Ti-23.4Al-31.7Nb (at.%) alloys", MAT SCI E A, 311(1-2), 2001, pp. 185-199
69. Baligidad, RG; Radhakrishna, A
    Effect of hot rolling and heat treatment on structure and properties of high carbon Fe-Al alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    R.G. Baligidad e A. Radhakrishna, "Effect of hot rolling and heat treatment on structure and properties of high carbon Fe-Al alloys", MAT SCI E A, 308(1-2), 2001, pp. 136-142
70. Han, SW; Kumai, S; Sato, A
    Fatigue crack growth behavior in semi-liquid die-cast Al-7%Si-0.4%Mg alloys with fine effective grain structure
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    S.W. Han et al., "Fatigue crack growth behavior in semi-liquid die-cast Al-7%Si-0.4%Mg alloys with fine effective grain structure", MAT SCI E A, 308(1-2), 2001, pp. 225-232
71. Yavari, AR; Le Moulec, A; Inoue, A; Botta, WJ; Vaughan, G; Kvick, A
    Metastable phases in Zr-based bulk glass-forming alloys detected using a synchrotron beam in transmission
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    A.R. Yavari et al., "Metastable phases in Zr-based bulk glass-forming alloys detected using a synchrotron beam in transmission", MAT SCI E A, 304, 2001, pp. 34-38
72. Das, SK; Perepezko, JH; Wu, RI; Wilde, G
    Undercooling and glass formation in Al-based alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    S.K. Das et al., "Undercooling and glass formation in Al-based alloys", MAT SCI E A, 304, 2001, pp. 159-165
73. Johnson, E; Johansen, A; Dahmen, U; Chen, S; Fujii, T
    Shapes and sizes of nanoscale Pb inclusions in Al
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    E. Johnson et al., "Shapes and sizes of nanoscale Pb inclusions in Al", MAT SCI E A, 304, 2001, pp. 187-193
74. Shimono, M; Onodera, H
    Molecular dynamics study on formation and crystallization of Ti-Al amorphous alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    M. Shimono e H. Onodera, "Molecular dynamics study on formation and crystallization of Ti-Al amorphous alloys", MAT SCI E A, 304, 2001, pp. 515-519
75. Rizzi, P; Baricco, M; Borace, S; Battezzati, L
    Phase selection in Al-TM-RE alloys: nanocrystalline Al versus intermetallics
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    P. Rizzi et al., "Phase selection in Al-TM-RE alloys: nanocrystalline Al versus intermetallics", MAT SCI E A, 304, 2001, pp. 574-578
76. Allen, CM; Kumar, S; Carroll, L; O'Reilly, KAQ; Cama, H
    Electron beam surface melting of model 1200 Al alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    C.M. Allen et al., "Electron beam surface melting of model 1200 Al alloys", MAT SCI E A, 304, 2001, pp. 604-607
77. Kim, TS; Lee, BT; Lee, CR; Chun, BS
    Microstructure of rapidly solidified Al-20Si alloy powders
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    T.S. Kim et al., "Microstructure of rapidly solidified Al-20Si alloy powders", MAT SCI E A, 304, 2001, pp. 617-620
78. Yu, FX; Cui, JZ; Ranganathan, S; Dwarakadasa, ES
    Fundamental differences between spray forming and other semisolid processes
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    F.X. Yu et al., "Fundamental differences between spray forming and other semisolid processes", MAT SCI E A, 304, 2001, pp. 621-626
79. Murty, BS; Ping, DH; Hono, K; Inoue, A
    APFIM and TEM study of the oxygen behavior during crystallization of Zr65Cu27.5Al7.5 metallic glass
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    B.S. Murty et al., "APFIM and TEM study of the oxygen behavior during crystallization of Zr65Cu27.5Al7.5 metallic glass", MAT SCI E A, 304, 2001, pp. 706-709
80. Janlewing, R; Koster, U
    Nucleation in crystallization of Zr-Cu-Ni-Al metallic glasses
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    R. Janlewing e U. Koster, "Nucleation in crystallization of Zr-Cu-Ni-Al metallic glasses", MAT SCI E A, 304, 2001, pp. 833-838
81. Mukhopadhyay, NK; Weatherly, GC
    Formation of quasicrystalline and vacancy ordered phases in vapour deposited thin films of Al-Cu-Co alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    N.K. Mukhopadhyay e G.C. Weatherly, "Formation of quasicrystalline and vacancy ordered phases in vapour deposited thin films of Al-Cu-Co alloys", MAT SCI E A, 304, 2001, pp. 855-859
82. Lalla, NP; Srivastava, ON
    Transmission electron microscopic studies of rapidly solidified Al-Cu-Gd alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    N.P. Lalla e O.N. Srivastava, "Transmission electron microscopic studies of rapidly solidified Al-Cu-Gd alloys", MAT SCI E A, 304, 2001, pp. 879-883
83. Waterloo, G; Hansen, V; Gjonnes, J; Skjervold, SR
    Effect of predeformation and preaging at room temperature in Al-Zn-Mg-(Cu,Zr) alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    G. Waterloo et al., "Effect of predeformation and preaging at room temperature in Al-Zn-Mg-(Cu,Zr) alloys", MAT SCI E A, 303(1-2), 2001, pp. 226-233
84. Almeida, A; Petrov, P; Nogueira, I; Vilar, R
    Structure and properties of Al-Nb alloys produced by laser surface alloying
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    A. Almeida et al., "Structure and properties of Al-Nb alloys produced by laser surface alloying", MAT SCI E A, 303(1-2), 2001, pp. 273-280
85. Lu, YZ; Wang, QD; Zeng, XQ; Zhu, YP; Ding, WJ
    Behavior of Mg-GAl-xSi alloys during solution heat treatment at 420 degrees C
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    Y.Z. Lu et al., "Behavior of Mg-GAl-xSi alloys during solution heat treatment at 420 degrees C", MAT SCI E A, 301(2), 2001, pp. 255-258
86. Wu, RI; Wilde, G; Perepezko, JH
    Glass formation and primary nanocrystallization in Al-base metallic glasses
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    R.I. Wu et al., "Glass formation and primary nanocrystallization in Al-base metallic glasses", MAT SCI E A, 301(1), 2001, pp. 12-17
87. Fjeldly, A; Soreng, A; Roven, HJ
    Strain localisation in solution heat treated Al-Zn-Mg alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    A. Fjeldly et al., "Strain localisation in solution heat treated Al-Zn-Mg alloys", MAT SCI E A, 300(1-2), 2001, pp. 165-170
88. Sastry, DH; Prasad, YVRK; Deevi, SC
    Influence of temperature and strain rate on the flow stress of an FeAl alloy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    D.H. Sastry et al., "Influence of temperature and strain rate on the flow stress of an FeAl alloy", MAT SCI E A, 299(1-2), 2001, pp. 157-163
89. Stolarz, J; Madelaine-Dupuich, O; Magnin, T
    Microstructural factors of low cycle fatigue damage in two phase Al-Si alloys
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    J. Stolarz et al., "Microstructural factors of low cycle fatigue damage in two phase Al-Si alloys", MAT SCI E A, 299(1-2), 2001, pp. 275-286
90. Morris, DG; Zhao, P; Munoz-Morris, MA
    An examination of the influence of strain rate on the stress anomaly in Fe3Al
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    
    D.G. Morris et al., "An examination of the influence of strain rate on the stress anomaly in Fe3Al", MAT SCI E A, 297(1-2), 2001, pp. 256-265
91. Mahmoud, MA
    Transient and steady state creep of Al-10 wt % Ag and Al-22 wt%Ag alloys during metastable phase transition
    PHYSICA B
    
    M.A. Mahmoud, "Transient and steady state creep of Al-10 wt % Ag and Al-22 wt%Ag alloys during metastable phase transition", PHYSICA B, 304(1-4), 2001, pp. 456-462
92. Kagaya, HM; Suzuki, T; Takaya, MS; Soma, T
    Phase diagrams and compression effect on solidus curve of Al-rich Al-Cu alloy
    PHYSICA B
    
    H.M. Kagaya et al., "Phase diagrams and compression effect on solidus curve of Al-rich Al-Cu alloy", PHYSICA B, 293(3-4), 2001, pp. 343-346
93. He, G; Lu, J; Bian, Z; Chen, DJ; Chen, GL; Tu, GC; Chen, GJ
    Fracture morphology and quenched-in precipitates induced embrittlement in a Zr-base bulk glass
    MATERIALS TRANSACTIONS JIM
    
    G. He et al., "Fracture morphology and quenched-in precipitates induced embrittlement in a Zr-base bulk glass", MATER T JIM, 42(2), 2001, pp. 356-364
94. Soda, K; Yoshimoto, O; Nozaki, H; Takeuchi, T; Mizutani, U; Kato, H; Kato, M; Nishino, Y; Imada, S; Suga, S; Matsushita, T; Saitoh, Y
    Magnetic circular dichroism at transition metal L-2,L-3 edges in DO3-type (Fe1-xMnx)(3)Al alloys
    JOURNAL OF SYNCHROTRON RADIATION
    
    K. Soda et al., "Magnetic circular dichroism at transition metal L-2,L-3 edges in DO3-type (Fe1-xMnx)(3)Al alloys", J SYNCHROTR, 8, 2001, pp. 455-456
95. Yoshimoto, O; Kato, M; Soda, K; Nozaki, H; Takeuchi, T; Mizutani, U; Kato, M; Nishino, Y; Imada, S; Suga, S; Matsushita, T; Saitoh, Y
    Magnetic circular dichroism at transition metal L(2,3-)edges in DO3-type (Fe1-xVx)(3)Al alloys
    JOURNAL OF SYNCHROTRON RADIATION
    
    O. Yoshimoto et al., "Magnetic circular dichroism at transition metal L(2,3-)edges in DO3-type (Fe1-xVx)(3)Al alloys", J SYNCHROTR, 8, 2001, pp. 457-459
96. Lee, JK; Choi, G; Kim, WT; Kim, DH
    Precipitation of icosahedral phase from amorphous Zr65Cu17.5-xAl7.5Ni10Agx(x=0, 5) alloys
    JOURNAL OF MATERIALS RESEARCH
    
    J.K. Lee et al., "Precipitation of icosahedral phase from amorphous Zr65Cu17.5-xAl7.5Ni10Agx(x=0, 5) alloys", J MATER RES, 16(5), 2001, pp. 1311-1317
97. Li, CH; Inoue, A
    Precipitation of icosahedral quasicrystalline phase in Hf69.5Al7.5Ni11Cu12metallic glass
    JOURNAL OF MATERIALS RESEARCH
    
    C.H. Li e A. Inoue, "Precipitation of icosahedral quasicrystalline phase in Hf69.5Al7.5Ni11Cu12metallic glass", J MATER RES, 16(4), 2001, pp. 1190-1194
98. Ni, XD; Chen, NX; Shen, J; Sun, ZQ; Yang, WY
    Site preference of alloying elements in Fe3Al-based alloys
    JOURNAL OF MATERIALS RESEARCH
    
    X.D. Ni et al., "Site preference of alloying elements in Fe3Al-based alloys", J MATER RES, 16(2), 2001, pp. 344-351
99. Chen, LQ; Wolverton, C; Vaithyanathan, V; Liu, ZK
    Modeling solid-state phase transformations and microstructure evolution
    MRS BULLETIN
    
    L.Q. Chen et al., "Modeling solid-state phase transformations and microstructure evolution", MRS BULL, 26(3), 2001, pp. 197-202
100. Yucel, O; Sahin, FC
     Production of aluminum-titanium-boron master alloy by aluminothermic process
     HIGH TEMPERATURE MATERIALS AND PROCESSES
     
     O. Yucel e F.C. Sahin, "Production of aluminum-titanium-boron master alloy by aluminothermic process", HIGH TEMP M, 20(2), 2001, pp. 137-142