Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where authors phrase all words ' Tomota, Y' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 45 riferimenti
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Tsuchida, N; Tomota, Y; Moriya, H; Umezawa, O; Nagai, K
      Application of the Kocks-Mecking model to tensile deformation of an austenitic 25Cr-19Ni steel

      ACTA MATERIALIA
    2. Harjo, S; Tomota, Y; Lukas, P; Neov, D; Vrana, M; Mikula, P; Ono, M
      In situ neutron diffraction study of alpha-gamma Fe-Cr-Ni alloys under tensile deformation

      ACTA MATERIALIA
    3. Tsujimoto, T; Matsui, T; Suzuki, T; Tomota, Y; Shibue, K; Furuyama, T
      Evolution of high aspect ratio grains in a TiAl-based alloy by directionalgrain growth

      INTERMETALLICS
    4. Park, JH; Tomota, Y; Takagi, S; Ishikawa, S; Shimizu, T
      Estimation of flow stress by the Kocks-Mecking model at strain rate of 10(3)/s for an ultra low carbon steel

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    5. Tomota, Y; Harjo, S; Lukas, P; Neov, D; Sittner, P
      In-situ neutron diffraction during shape-memory behavior in Fe-Mn-Si-Cr

      JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY
    6. Lue, AHY; Tomota, Y; Taya, M; Inoue, K; Mori, T
      Micro-mechanic modeling of the stress-strain curves of a TiNiCu shape memory alloy

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    7. Tsuchida, N; Tomota, Y
      A micromechanic modeling for transformation induced plasticity in steels

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    8. Nozaki, H; Tomota, Y
      Internal stress and strain energy yielded by gamma -> epsilon martensitic transformation in a polycrystalline ferrous alloy

      MATERIALS TRANSACTIONS JIM
    9. Suzuki, T; Fukuyama, T; Tada, M; Tomota, Y; Tsujimoto, T
      Anisotropy in strength of a TiAl base polycrystal with unidirectionally oriented lamellae

      MATERIALS TRANSACTIONS JIM
    10. Tsuchida, Y; Kirihara, S; Tomota, Y
      Functionally graded coating for steels by reaction diffusion using FeAl3 powder

      ISIJ INTERNATIONAL
    11. Niinobe, K; Tomota, Y; Nakamura, M
      Microstructural control for superplasticity simply by heat treatment without thermomechanical processing in a Ti-46Al-3.5Cr alloy

      ISIJ INTERNATIONAL
    12. Tsuchida, N; Moriya, H; Tomota, Y; Umezawa, O; Nagai, K
      Description of stress-strain curves based on thermal activation models fora Ti-Fe-O alloy at 77 to 296 K with strain rates from 10(-9) to 10(-2) sec(-1)

      ISIJ INTERNATIONAL
    13. Tomota, Y; Fujita, M; Ohnuki, T; Harjo, S; Suzuki, T
      Relaxation of thermal phase stresses by subzero-cooling in SiCW/A2014 metal matrix composites

      ZEITSCHRIFT FUR METALLKUNDE
    14. Motomura, N; Tomota, Y; Akagi, H; Seo, T
      A study of language disorders associated with dementia of Alzheimer type in Japanese: A preliminary study

      PSYCHOLOGIA
    15. Tsuchida, N; Tomota, Y; Nagai, K
      Estimation of CO2 emission during thermo-mechanical process and eco-steel design of a Mn-Si-C steel by microstructural control

      TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
    16. Suzuki, T; Fukutomi, H; Tomota, Y; Tsujimoto, T
      Formation of oriented lamellar colonies in a TiAlMn alloy produced by a reactive sintering

      MATERIALS TRANSACTIONS JIM
    17. KIKUCHI T; OGAWA K; KAJIWARA S; MATSUNAGA T; MIYAZAKI S; TOMOTA Y
      HIGH-RESOLUTION ELECTRON-MICROSCOPY STUDIES ON COHERENT PLATE PRECIPITATES AND NANOCRYSTALS FORMED BY LOW-TEMPERATURE HEAT-TREATMENTS OF AMORPHOUS TI-RICH TI-NI THIN-FILMS

      Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
    18. TOMOTA Y; NAKANO J; XIA Y; INOUE K
      UNUSUAL STRAIN-RATE DEPENDENCE OF LOW-TEMPERATURE FRACTURE-BEHAVIOR IN HIGH-NITROGEN BEARING AUSTENITIC STEELS

      Acta materialia
    19. TOMOTA Y; XIA Y; INOUE K
      MECHANISM OF LOW-TEMPERATURE BRITTLE-FRACTURE IN HIGH-NITROGEN BEARING AUSTENITIC STEELS

      Acta materialia
    20. TOMOTA Y; MORIOKA Y; NAKAGAWARA W
      EPSILON-MARTENSITE TO AUSTENITE REVERSION AND RELATED PHENOMENA IN FE-24MN AND FE-24MN-6SI ALLOYS

      Acta materialia
    21. Harjo, S; Tomota, Y; Ono, M
      Measurements of thermal residual elastic strains in ferrite-austenite Fe-Cr-Ni alloys by neutron and X-ray diffractions

      ACTA MATERIALIA
    22. KUBOTA S; XIA Y; TOMOTA Y
      WORK-HARDENING BEHAVIOR AND EVOLUTION OF DISLOCATION-MICROSTRUCTURES IN HIGH-NITROGEN BEARING AUSTENITIC STEELS

      ISIJ international
    23. TAKANEZAWA M; TOMOTA Y; KOBAYASHI Y
      A NEW HEAT-RESISTANT CAST-IRON FOR THIN WALL EXHAUST MANIFOLD

      ISIJ international
    24. KINOMURA T; NASU S; TOMOTA Y
      FE-57 MOSSBAUER STUDY OF GAMMA-FEMN AND EPSILON-FEMN ALLOYS

      Nippon Kinzoku Gakkaishi
    25. OHNUKI T; FUJITA M; TOMOTA Y; ONO M
      RESIDUAL-STRESS MEASUREMENTS BY X-RAY AND NEUTRON DIFFRACTIONS IN HEAT-TREATED SICW A2014 COMPOSITES/

      Nippon Kinzoku Gakkaishi
    26. Tsuchida, Y; Kirihara, S; Tomota, Y; Tsujimoto, T
      Ti/Ti3Sn functionally graded coating by reaction diffusion and eutectic reaction

      JOURNAL OF THE JAPAN INSTITUTE OF METALS
    27. MATSUSHIMA M; SHIROMO H; SATO H; TOMOTA Y
      EFFECT OF NITROGEN ADDITION ON LOCALIZED CORROSION BEHAVIOR IN SUS316L STAINLESS-STEELS

      Tetsu to hagane
    28. RUDIONO; TOMOTA Y
      APPLICATION OF THE SECANT METHOD TO PREDICTION OF FLOW CURVES IN MULTI-MICROSTRUCTURE STEELS

      Acta materialia
    29. SUZUKI T; TOMOTA Y; TSUJIMOTO T; FURUYAMA T; SHIBUE K
      CONTROL OF LAMELLAR ORIENTATION IN TIAL BASE ALLOY USING A COMBINATION OF HEAVY EXTRUSION AND REACTIVE SINTERING

      Philosophical magazine letters
    30. KIRIHARA S; TOMOTA Y; TSUJIMOTO T
      APPLICATION OF AN INTERMETALLIC COMPOUND TI5SI3 TO FUNCTIONALLY GRADED MATERIALS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    31. KIRIHARA S; TOMOTA Y; TSUJIMOTO T
      FABRICATION OF TI TI5SI3 FUNCTIONALLY GRADED MATERIAL BY EUTECTIC BONDING METHOD/

      Materials transactions, JIM
    32. KIRIHARA S; TOMOTA Y; TSUJIMOTO T
      FABRICATION OF TI TI3SN FUNCTIONALLY GRAD ED MATERIAL BY EUTECTIC BONDING METHOD/

      Nippon Kinzoku Gakkaishi
    33. TOMOTA Y; IIZUMI K; IWASAKI N; SATO H; MATSUSHIMA M
      ANODIC POLARIZATION BEHAVIOR AND PITTING POTENTIALS OF HIGH-NITROGEN BEARING 18MN-18CR AUSTENITIC STEELS

      Nippon Kinzoku Gakkaishi
    34. MORIOKA Y; TOMOTA Y
      ENHANCEMENT OF SHAPE-MEMORY AND ITS ANISO TROPY BY TRAINING TREATMENTIN AN FE-32MN-6SI ALLOY

      Tetsu to hagane
    35. KOTANI S; TUCHIDA N; TOMOTA Y
      UPPER AND LOWER BOUNDS IN FLOW-STRESS OF A DUAL-PHASE STEEL PREDICTEDBY THE SECANT METHOD AND RELATED MICROSTRUCTURES

      Tetsu to hagane
    36. YAMAGUCHI K; MORIOKA Y; TOMOTA Y
      ANISOTROPY IN THE SHAPE-MEMORY EFFECT IN THERMOMECHANICALLY TREATED FE-MN-SI ALLOYS

      Scripta materialia
    37. OHNUKI T; TOMOTA Y
      THERMAL-EXPANSION COEFFICIENT IN A REAL FIBER-REINFORCED METAL-MATRIXCOMPOSITE

      Scripta materialia
    38. OHTA H; TOMOTA Y; WATANABE R; WASEDA Y
      NEW METHOD FOR ESTIMATING THE EFFECTIVE T HERMAL-CONDUCTIVITY OF COMPOSITE-MATERIALS FROM THE OPTICAL MICROGRAPH DATA

      Nippon Kinzoku Gakkaishi
    39. TOMOTA Y; KIMURA K; SUZUKI T; TSUJIMOTO T
      MICROSTRUCTURE CONTROL OF A TIAL BASE ALL OY PREPARED BY REACTIVE-SINTERING BY LOW-TEMPERATURE HIP

      Nippon Kinzoku Gakkaishi
    40. OHNUKI T; TOMOTA Y; ONO M
      RESIDUAL ELASTIC STRAIN-MEASUREMENT IN HE AT-TREATED SIC WHISKER A2014 COMPOSITE BY NEUTRON-DIFFRACTION

      Nippon Kinzoku Gakkaishi
    41. OHTA H; TOMOTA Y; KAWASAKI A; WATANABE R; WASEDA Y
      THERMAL-CONDUCTIVITIES OF SUS304 PSZ COMP OSITE-MATERIALS/

      Tetsu to hagane
    42. TOMOTA Y; YAMAGUCHI K
      INFLUENCE OF ALFA MARTENSITE ON SHAPE-MEMORY IN FE-MN-BASED ALLOYS

      Journal de physique. IV
    43. KIKUCHI T; KAJIWARA S; TOMOTA Y
      FORMATION PROCESS OF LAMELLA STRUCTURES BY DEFORMATION IN AN FE-MN-SI-CR-NI SHAPE-MEMORY ALLOY

      Journal de physique. IV
    44. TSUZAKI K; NATSUME Y; TOMOTA Y; MAKI T
      EFFECT OF SOLUTION HARDENING ON THE SHAPE-MEMORY EFFECT OF FE-MN BASED ALLOYS

      Scripta metallurgica et materialia
    45. KIKUCHI T; KAJIWARA S; TOMOTA Y
      MICROSCOPIC STUDIES ON STRESS-INDUCED MARTENSITE-TRANSFORMATION AND ITS REVERSION IN AN FE-MN-SI-CR-NI SHAPE-MEMORY ALLOY

      Materials transactions, JIM


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 18/02/20 alle ore 14:35:56