Le informazioni sugli articoli di fonte ISI sono coperte da copyright

Per ulteriori informazioni selezionare i riferimenti di interesse.

1. Gediga, J; Florin, H; Eyerer, P
   Life cycle engineering - A tool for optimizing technologies, parts, and systems
   MECHANICAL LIFE CYCLE HANDBOOK
   
   J. Gediga et al., "Life cycle engineering - A tool for optimizing technologies, parts, and systems", MECH ENG SE, 138, 2002, pp. 379-403
2. Eyerer, P
   Materials in competition
   KUNSTSTOFFE-PLAST EUROPE
   
   P. Eyerer, "Materials in competition", KUNSTST-P E, 90(10), 2000, pp. 42
3. Weller, M; Eyerer, P
   Functionality is the key factor
   KUNSTSTOFFE-PLAST EUROPE
   
   M. Weller e P. Eyerer, "Functionality is the key factor", KUNSTST-P E, 90(10), 2000, pp. 224
4. Kech, A; Ludwig, HC; Moginger, B; Eyerer, P; Christiansen, JD
   Mechanical properties of isotactic polypropylene with oriented and cross-hatched lamellae structure
   INTERNATIONAL POLYMER PROCESSING
   
   A. Kech et al., "Mechanical properties of isotactic polypropylene with oriented and cross-hatched lamellae structure", INT POLYM P, 15(2), 2000, pp. 202-207
5. Moginger, B; Ludwig, HC; Kech, A; Eyerer, P
   Calculation of mechanical properties of short fiber reinforced composites using the elementary volume concept. Part 1: Young's moduli
   KAUTSCHUK GUMMI KUNSTSTOFFE
   
   B. Moginger et al., "Calculation of mechanical properties of short fiber reinforced composites using the elementary volume concept. Part 1: Young's moduli", KAUT GUM KU, 52(3), 1999, pp. 162
6. Wagner, M; Kolarik, V; Michelfelder, A; Juez-Lorenzo, MD; Hirth, T; Eisenreich, N; Eyerer, P
   Materials for SCWO processes for the oxidation of chlorine containing residues in supercritical water
   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
   
   M. Wagner et al., "Materials for SCWO processes for the oxidation of chlorine containing residues in supercritical water", MATER CORRO, 50(9), 1999, pp. 523-526
7. von Riewel, A; Knoblauch, M; Eyerer, P
   Avoidance of surface defects in gas-assist injection moulding
   KUNSTSTOFFE-PLAST EUROPE
   
   A. von Riewel et al., "Avoidance of surface defects in gas-assist injection moulding", KUNSTST-P E, 89(7), 1999, pp. 44
8. Eyerer, P
   Mixed feeling
   KUNSTSTOFFE-PLAST EUROPE
   
   P. Eyerer, "Mixed feeling", KUNSTST-P E, 89(5), 1999, pp. 3-3
9. Henning, F; Eyerer, P; Troster, S; Pfinztal, MJ
   Load-oriented fibre composite structures
   KUNSTSTOFFE-PLAST EUROPE
   
   F. Henning et al., "Load-oriented fibre composite structures", KUNSTST-P E, 89(12), 1999, pp. A107-A111
10. Hubner, C; Gessler, E; Elsner, P; Eyerer, P
    The importance of micromechanical phenomena in energetic materials
    PROPELLANTS EXPLOSIVES PYROTECHNICS
    
    C. Hubner et al., "The importance of micromechanical phenomena in energetic materials", PROP EXPL P, 24(3), 1999, pp. 119-125
11. Federolf, HA; Eyerer, P; Moginger, B; Mebus, C; Jin, R; Scheer, W
    Study on epoxy novolac and carbon-fiber reinforced epoxy novolac composites for use as implant materials. Part 1. Mechanical and viscoelastic properties
    JOURNAL OF POLYMER ENGINEERING
    
    H.A. Federolf et al., "Study on epoxy novolac and carbon-fiber reinforced epoxy novolac composites for use as implant materials. Part 1. Mechanical and viscoelastic properties", J POLYM ENG, 19(4), 1999, pp. 243-263
12. Federolf, HA; Eyerer, P; Mebus, C; Moginger, B; Jin, R; Scheer, W
    Study on epoxy novolac and carbon-fiber reinforced epoxy novolac composites for use as implant materials. Part 2. Physico-chemical properties
    JOURNAL OF POLYMER ENGINEERING
    
    H.A. Federolf et al., "Study on epoxy novolac and carbon-fiber reinforced epoxy novolac composites for use as implant materials. Part 2. Physico-chemical properties", J POLYM ENG, 19(4), 1999, pp. 265-285
13. Rohe, T; Becker, W; Kolle, S; Eisenreich, N; Eyerer, P
    Near infrared (NIR) spectroscopy for in-line monitoring of polymer extrusion processes
    TALANTA
    
    T. Rohe et al., "Near infrared (NIR) spectroscopy for in-line monitoring of polymer extrusion processes", TALANTA, 50(2), 1999, pp. 283-290
14. Harsch, M; Eyerer, P; Finkbeiner, M; Saur, K
    Life-cycle simulation in the automotive painting industry
    TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
    
    M. Harsch et al., "Life-cycle simulation in the automotive painting industry", T I MET FIN, 77, 1999, pp. 26-28
15. EYERER P; ELSNER P
    USING PLASTICS TO MAKE NEW PRODUCTS
    Journal of polymer engineering
    
    P. Eyerer e P. Elsner, "USING PLASTICS TO MAKE NEW PRODUCTS", Journal of polymer engineering, 18(5), 1998, pp. 301-339
16. BURKLE E; REHM G; EYERER P
    IN-MOLD LAMINATION BY INJECTION AND COMPR ESSION MOLDING PROCESSES
    Kunststoffe, Plast Europe
    
    E. Burkle et al., "IN-MOLD LAMINATION BY INJECTION AND COMPR ESSION MOLDING PROCESSES", Kunststoffe, Plast Europe, 86(3), 1996, pp. 298
17. EYERER P; MARTINS R
    ORIENTATIONS IN GIT MOLDED ARTICLES
    Kunststoffe, Plast Europe
    
    P. Eyerer e R. Martins, "ORIENTATIONS IN GIT MOLDED ARTICLES", Kunststoffe, Plast Europe, 86(1), 1996, pp. 40
18. HARSCH M; SCHUCKERT M; EYERER P; SAUR K
    LIFE-CYCLE ASSESSMENT
    Advanced materials & processes
    
    M. Harsch et al., "LIFE-CYCLE ASSESSMENT", Advanced materials & processes, 149(6), 1996, pp. 43-46
19. EYERER P
    SELECTED ASPECTS OF (FUTURE) DEVELOPMENTS IN POLYMER ENGINEERING .2.
    Journal of polymer engineering
    
    P. Eyerer, "SELECTED ASPECTS OF (FUTURE) DEVELOPMENTS IN POLYMER ENGINEERING .2.", Journal of polymer engineering, 15(3-4), 1996, pp. 197-220
20. SHUSTER M; SHERMAN D; SIEGMANN A; NARKIS M; JENNEWEIN CM; EYERER P
    STRESS-DISTRIBUTION IN AND AROUND A SPHERICALLY ENDED FIBER EMBEDDED IN A POLYMER MATRIX
    Polymer composites
    
    M. Shuster et al., "STRESS-DISTRIBUTION IN AND AROUND A SPHERICALLY ENDED FIBER EMBEDDED IN A POLYMER MATRIX", Polymer composites, 17(4), 1996, pp. 568-577
21. KELLER B; LUCK T; EYERER P; VOLKLE D; BAUMANN F
    PROTOTYPES AND SMALL(EST) SCALE PRODUCTIO NS
    Kunststoffe, Plast Europe
    
    B. Keller et al., "PROTOTYPES AND SMALL(EST) SCALE PRODUCTIO NS", Kunststoffe, Plast Europe, 85(11), 1995, pp. 1864
22. EYERER P
    SELECTED ASPECTS OF (FUTURE) DEVELOPMENTS IN POLYMER ENGINEERING .1.
    Journal of polymer engineering
    
    P. Eyerer, "SELECTED ASPECTS OF (FUTURE) DEVELOPMENTS IN POLYMER ENGINEERING .1.", Journal of polymer engineering, 14(2-3), 1995, pp. 85-125
23. EYERER P; WIEDEMANN B; DUSEL KH; KELLER B
    MATERIALS FOR SOLID FREEFORM MANUFACTURING PROCESSES
    Computers in industry
    
    P. Eyerer et al., "MATERIALS FOR SOLID FREEFORM MANUFACTURING PROCESSES", Computers in industry, 28(1), 1995, pp. 35-45
24. PHILIPP JA; EYERER P; ERVE S; SCHUCKERT M; THEOBALD W; VOLKHAUSEN W
    ECO BALANCES FOR STEEL PRODUCTS - CURRENT SITUATION AND PERSPECTIVES
    Stahl und Eisen
    
    J.A. Philipp et al., "ECO BALANCES FOR STEEL PRODUCTS - CURRENT SITUATION AND PERSPECTIVES", Stahl und Eisen, 114(11), 1994, pp. 71-78
25. MEYER U; MOHLE K; EYERER P; MARESCH L
    DEVELOPMENT, CONSTRUCTION AND START-UP OF A 1-M3 CLIMATE TEST CHAMBERFOR THE DETERMINATION OF EMISSIONS FROM INDOOR COMPONENTS
    Staub, Reihhaltung der Luft
    
    U. Meyer et al., "DEVELOPMENT, CONSTRUCTION AND START-UP OF A 1-M3 CLIMATE TEST CHAMBERFOR THE DETERMINATION OF EMISSIONS FROM INDOOR COMPONENTS", Staub, Reihhaltung der Luft, 54(4), 1994, pp. 137-142
26. EYERER P; MARTINS R; BURKLE E
    INJECTION-MOLDING WITH INTERNAL GAS-PRESS URE - AN OVERVIEW OVER THE CURRENT STATE-OF-THE-ART
    Kunststoffe, German plastics
    
    P. Eyerer et al., "INJECTION-MOLDING WITH INTERNAL GAS-PRESS URE - AN OVERVIEW OVER THE CURRENT STATE-OF-THE-ART", Kunststoffe, German plastics, 83(7), 1993, pp. 505-517
27. SCHUCKERT M; DEKORSY T; PFLEIDERER I; EYERER P
    DEVELOPING A COMPREHENSIVE BALANCE OF AN AUTOMOBILE INTAKE PIPE
    Kunststoffe, German plastics
    
    M. Schuckert et al., "DEVELOPING A COMPREHENSIVE BALANCE OF AN AUTOMOBILE INTAKE PIPE", Kunststoffe, German plastics, 83(3), 1993, pp. 195-200
28. EYERER P; ELSNER P; WIEDEMANN B; BAUMANN F; KELLER B
    RAPID PROTOTYPING - NEW METHODS
    Kunststoffe, German plastics
    
    P. Eyerer et al., "RAPID PROTOTYPING - NEW METHODS", Kunststoffe, German plastics, 83(12), 1993, pp. 949-955
29. ELSNER P; SCHMIEDEL M; MAYER A; EYERER P
    DIELECTRIC MONITORING OF A MANUFACTURING PROCESS
    Kunststoffe, German plastics
    
    P. Elsner et al., "DIELECTRIC MONITORING OF A MANUFACTURING PROCESS", Kunststoffe, German plastics, 81(7), 1991, pp. 643-646
30. EYERER P; BURKLE E
    INJECTION-MOLDING WITH DECREASED CLAMPINGFORCE
    Kunststoffe, German plastics
    
    P. Eyerer e E. Burkle, "INJECTION-MOLDING WITH DECREASED CLAMPINGFORCE", Kunststoffe, German plastics, 81(10), 1991, pp. 851-862