Catalogo Articoli (Spogli Riviste)

HELP
ATTENZIONE: attualmente gli articoli Current Contents (fonte ISI) a partire dall'anno 2002 sono consultabili sulla Risorsa On-Line

Le informazioni sugli articoli di fonte ISI sono coperte da copyright

La ricerca find articoli where authors phrase all words ' Chun, BS' sort by level,fasc_key/DESCEND, pagina_ini_num/ASCEND ha restituito 44 riferimenti
Selezionare un intervallo

Per ulteriori informazioni selezionare i riferimenti di interesse.

    1. Hong, SJ; Kim, TS; Suryanarayana, C; Chun, BS
      Mechanical milling of gas-atomized Al-Ni-Mm (Mm = misch metal) alloy powders

      METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
    2. Maeng, DY; Lee, JH; Hong, SI; Chun, BS
      Microstructure and mechanical properties of rapidly solidified Al-7wt.%Mg-X (X = Cr, Zr or Mn) alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    3. Cho, SS; Kim, TS; Won, CW; Chun, BS
      Development of RQ Al composites by new process

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    4. Hong, SJ; Warren, PJ; Chun, BS
      Nanocrystallization behaviour of Al-Y-Ni with CU additions

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    5. Son, HT; Kim, TS; Lee, JH; Maeng, DY; Hong, SJ; Won, CW; Cho, SS; Chun, BS
      Extrusion behavior of RQ Al composite powder manufactured by a stone mill type crusher

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    6. Maeng, DY; Lee, JH; Kim, TS; Son, HT; Hong, SJ; Won, CW; Cho, SS; Chun, BS
      The mechanical properties and microstructure of Al composite bar manufactured by using stone mill crushed rapidly solidified Al/Al2O3-TiC

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    7. Kim, TS; Lee, BT; Lee, CR; Chun, BS
      Microstructure of rapidly solidified Al-20Si alloy powders

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    8. Lee, JH; Kim, TS; Maeng, DY; Son, HT; Hong, SJ; Won, CW; Cho, SS; Chun, BS
      Characteristics of ceramic particle reinforced Al composite powder manufactured by a stone mill type crusher using twin roll cast Al alloy flake: a model on the formation of composite powder

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    9. Maeng, DY; Kim, TS; Lee, JH; Hong, SJ; Seo, SK; Chun, BS
      Microstructure and strength of rapidly solidified and extruded Mg-Zn alloys

      SCRIPTA MATERIALIA
    10. Maeng, DY; Lee, JH; Won, CW; Cho, SS; Chun, BS
      The effects of processing parameters on the microstructure and mechanical properties of modified B390 alloy in direct squeeze casting

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    11. Kim, HM; Kim, TS; Suryanarayana, C; Chun, BS
      Microstructure and wear characteristics of rapidly solidified Al-Pb-Cu alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    12. Lee, JH; Won, CW; Cho, SS; Chun, BS; Kim, SW
      Effects of melt flow and temperature on the macro and microstructure of scroll compressor in direct squeeze casting

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    13. Kim, TS; Suryanarayana, C; Chun, BS
      Effect of alloying elements and degassing pressure on the structure and mechanical properties of rapidly solidified Al-20Si-5Fe-2X (X = Cr, Zr, or Ni) alloys

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    14. Chun, BS; Wilkinson, GT
      Drop size and hold-up in countercurrent extraction with supercritical CO2 in a spray column

      INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
    15. Lee, JH; An, CY; Won, CW; Cho, SS; Chun, BS
      Characteristics of Al2O3-SiC composite powder prepared by the self-propagating high-temperature synthesis process and its sintering behavior

      MATERIALS RESEARCH BULLETIN
    16. Lee, JH; Kim, HS; Hong, SI; Won, CW; Cho, SS; Chun, BS
      Effect of die geometry on the microstructure of indirect squeeze cast and gravity die cast 5083 wrought Al alloy and numerical analysis of the cooling behavior

      JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
    17. Hong, SJ; Kim, TS; Kim, HS; Kim, WT; Chun, BS
      Microstructural behavior of rapidly solidified and extruded Al-14wt%Ni-14wt%Mm (Mm, misch metal) alloy powders

      MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
    18. Chun, BS; Wilkinson, GT
      Ternary phase equilibria of the iso-propanol+water+carbon dioxide system at high pressure

      KOREAN JOURNAL OF CHEMICAL ENGINEERING
    19. Zhang, J; Lee, JH; Won, CW; Cho, SS; Chun, BS
      Synthesis of Al2O3-WC composite powder by SHS process

      JOURNAL OF MATERIALS SCIENCE
    20. Cho, SS; Chun, BS; Won, CW; Kim, SD; Lee, BS; Baek, H; Suryanarayana, C
      Structure and properties of rapidly solidified Mg-Al alloys

      JOURNAL OF MATERIALS SCIENCE
    21. KIM HS; WON CW; CHUN BS
      PLASTIC-DEFORMATION OF POROUS METAL WITH AN INITIAL INHOMOGENEOUS DENSITY DISTRIBUTION

      Journal of materials processing technology
    22. Kim, TS; Hong, SJ; Kim, WT; Won, CW; Cho, SS; Chun, BS
      Microstructures and mechanical properties of Al-20Si-xFe (x=3, 5, 7) alloys manufactured by rapid solidification processing

      MATERIALS TRANSACTIONS JIM
    23. BADALYAN AG; WILKINSON GT; CHUN BS
      EXTRACTION OF AUSTRALIAN GINGER ROOT WITH CARBON-DIOXIDE AND ETHANOL ENTRAINER

      The Journal of supercritical fluids
    24. KIM HS; SURYANARAYANA C; KIM SJ; CHUN BS
      NUMERICAL INVESTIGATION OF MECHANICAL-BEHAVIOR OF NANOCRYSTALLINE COPPER

      Powder Metallurgy
    25. KIN HS; KIM SJ; LEE HR; WON CW; CHO SS; CHUN BS
      COMPACTION BEHAVIOR OF RAPIDLY SOLIDIFIED AL-SI-FE-CR ALLOY POWDERS

      Scripta materialia
    26. SONG HS; NOH JW; BAEK WH; KANG SJL; CHUN BS
      UNDULATION OF W MATRIX INTERFACE BY RESINTERING OF CYCLICALLY HEAT-TREATED W-NI-FE HEAVY ALLOYS/

      Metallurgical and materials transactions. A, Physical metallurgy andmaterials science
    27. HONG SJ; KIM TS; KIM WT; CHUN BS
      THE EFFECTS OF CR AND ZR ADDITION ON THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF RAPIDLY SOLIDIFIED AL-20SI-5FE ALLOYS

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    28. CHO SS; CHUN BS; WON CW; LEE BS; KIM HK; RYU M; ANTOLOVICH SD
      RAPIDLY SOLIDIFIED ALUMINUM-ALLOY POWDER

      Advanced materials & processes
    29. KO SK; WON CW; CHO SS; CHUN BS
      ZINC REDUCTION OF MOO3 IN A SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS PROCESS

      Metallurgical and materials transactions. B, Process metallurgy and materials processing science
    30. JUNG JC; KO SG; WON CW; CHO SS; CHUN BS
      THE SELF-PROPAGATION HIGH-TEMPERATURE SYNTHESIS OF ULTRAFINE HIGH-PURITY TUNGSTEN POWDER FROM SCHEELITE

      Journal of materials research
    31. CHUN BS; LEE HG; CHEON JK; WILKINSON G
      MASS-TRANSFER IN A COUNTERCURRENT SPRAY COLUMN AT SUPERCRITICAL CONDITIONS

      The Korean journal of chemical engineering
    32. HWANG SH; JEONG G; LEE JS; LEE SH; CHUN BS
      TREATMENT OF OBSTRUCTED NASOLACRIMAL DUCT BY PLASTIC STENT WITHOUT FLUOROSCOPIC GUIDANCE

      Investigative ophthalmology & visual science
    33. HONG SK; TEZUKA H; KAMIO A; CHUN BS; CHO SS
      MECHANISM OF MACROSEGREGATION FORMATION I N SIC WHISKER-REINFORCED ALUMINUM-ALLOYS COMPOSITES FABRICATED BY SQUEEZE CASTING

      Nippon Kinzoku Gakkaishi
    34. CHANG DK; WON CW; CHUN BS; SHIM GC; SOHN HY
      PURIFYING EFFECTS AND PRODUCT MICROSTRUCTURE IN THE FORMATION OF TIC POWDER BY THE SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (VOL 26, PG 176, 1995)

      Metallurgical and materials transactions. B, Process metallurgy and materials processing science
    35. CHANG DK; WON CW; CHUN BS; SHIM GC
      PURIFYING EFFECTS AND PRODUCT MICROSTRUCTURE IN THE FORMATION OF TIC POWDER BY THE SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS

      Metallurgical and materials transactions. B, Process metallurgy and materials processing science
    36. CHUN BS; WILKINSON GT
      INTERFACIAL-TENSION IN HIGH-PRESSURE CARBON-DIOXIDE MIXTURES

      Industrial & engineering chemistry research
    37. KO SG; WON CW; CHUN BS; SOHN HY
      MAGNESIUM REDUCTION OF WO3 IN A SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (SHS) PROCESS

      Journal of materials research
    38. LEE CR; LEEM JY; CHUN BS
      THE AES AND MICRO-RAMAN CHARACTERISTICS OF DIAMOND THIN-FILMS GROWN BY EACVD AS THE NUCLEATION FREE-ENERGY INCREASES

      Journal of materials science letters
    39. KANG BS; WON CW; CHUN BS; SOHN HY
      PREPARATION OF NICKEL-COATED ALUMINA COMPOSITE POWDER BY AN AQUEOUS-PHASE REDUCTION PROCESS

      Journal of Materials Science
    40. KO SG; WON CW; CHUN BS; SOHN HY
      THE SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (SHS) OF ULTRAFINE HIGH-PURITY TIC POWDER FROM TIO2+MG+C

      Journal of Materials Science
    41. KIM WT; JANG PW; YU SC; CHUN BS
      HEAT-TREATMENT OF MELT-SPUN AMORPHOUS FE-SI-B-CU-NB ALLOY

      Materials science & engineering. A, Structural materials: properties, microstructure and processing
    42. LEE BT; CHUN BS; HIRAGA K
      MICROSTRUCTURE OF GAS-ATOMIZED AL-20 WT-PERCENT SI-1 WT-PERCENT NI POWDERS STUDIED BY ELECTRON-MICROSCOPY

      Journal of materials research
    43. LEE JW; WON CW; CHUN BS; SOHN HY
      DIP COATING OF ALUMINA FILMS BY THE SOL-GEL METHOD

      Journal of materials research
    44. WON CW; CHUN BS
      PREPARATION OF ULTRAFINE TUNGSTEN CARBIDE POWDER BY CVD METHOD FROM WCL6-C2H2-H2 MIXTURES

      Journal of materials research


ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 19/01/21 alle ore 07:24:38