Catalogo Articoli (Spogli Riviste)

OPAC HELP

Titolo:
Coating of superplastic Ti-alloy substrates with Ti and Ti-O films by magnetron DC sputtering
Autore:
Sonoda, T; Watazu, A; Zhu, J; Kamiya, A; Nonami, T; Kameyama, T; Naganuma, K; Kato, M;
Indirizzi:
Natl Ind Res Inst Nagoya, Kita Ku, Nagoya, Aichi 462, Japan Natl Ind Res Inst Nagoya Nagoya Aichi Japan 462 Nagoya, Aichi 462, Japan
Titolo Testata:
THIN SOLID FILMS
fascicolo: 2, volume: 386, anno: 2001,
pagine: 227 - 232
SICI:
0040-6090(20010515)386:2<227:COSTSW>2.0.ZU;2-H
Fonte:
ISI
Lingua:
ENG
Soggetto:
COMMERCIALLY PURE TITANIUM; TISSUE-RESPONSE; IMPLANTS; BONE; BEHAVIOR; TI6AL4V;
Keywords:
biomaterials; plasma processing and deposition; sputtering; titanium oxide;
Tipo documento:
Article
Natura:
Periodico
Settore Disciplinare:
Physical, Chemical & Earth Sciences
Engineering, Computing & Technology
Citazioni:
25
Recensione:
Indirizzi per estratti:
Indirizzo: Sonoda, T Natl Ind Res Inst Nagoya, Kita Ku, Hirate Cho 1-1, Nagoya, Aichi462, Japan Natl Ind Res Inst Nagoya Hirate Cho 1-1 Nagoya Aichi Japan 462 n
Citazione:
T. Sonoda et al., "Coating of superplastic Ti-alloy substrates with Ti and Ti-O films by magnetron DC sputtering", THIN SOL FI, 386(2), 2001, pp. 227-232

Abstract

In order to improve the biocompatibility of superplastic Ti-alloys such asTi-6Al-4V or Ti-4.5Al-3V-2Fe-2Mo, coating of the alloy with pure titanium and Ti-O films by magnetron DC sputtering was examined. The sputter-deposition of the pure titanium film and the Ti-O films were carried out in Ar gasand in Ar-O-2 gas mixtures, respectively. Both the pure titanium film deposited in Ar and the Ti-O films deposited in Ar-O-2 appeared to be uniform and adhesive. Under AES, the Ti/O ratio in depth direction was nearly constant in each of the films and oxygen concentration increased with increasing oxygen content of the sputter gas. Based on XRD, it was concluded that oxygen atoms dissolved into or-titanium crystals at lower oxygen contents, while suboxides such as Ti4O7 and Ti6O11 and oxides such as TiO2(anatase) were formed at higher oxygen contents. It was found that the orientation of the or-titanium phase formed in the Ti-O films changed from (002) dominant to (011) dominant with increasing oxygen content. The Vickers hardness of the films increased linearly with increasing oxygen content, and the maximum hardness reached over Hv = 1600. Furthermore, it was found that the ductility of the deposited pure titanium film was improved under such high temperatures as 800 degreesC and that its elongation reached over 160%, while the Ti-O films were still brittle under such a high temperature. (C) 2001 ElsevierScience B.V. All rights reserved.

ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 04/12/20 alle ore 09:49:43