Catalogo Articoli (Spogli Riviste)

OPAC HELP

Titolo:
Carbon dioxide laser fabrication of fused-fiber couplers and tapers
Autore:
Dimmick, TE; Kakarantzas, G; Birks, TA; Russell, PS;
Indirizzi:
Univ Bath, Sch Phys, Bath BA2 7AY, Avon, England Univ Bath Bath Avon England BA2 7AY Sch Phys, Bath BA2 7AY, Avon, England
Titolo Testata:
APPLIED OPTICS
fascicolo: 33, volume: 38, anno: 1999,
pagine: 6845 - 6848
SICI:
0003-6935(19991120)38:33<6845:CDLFOF>2.0.ZU;2-I
Fonte:
ISI
Lingua:
ENG
Soggetto:
SHAPE;
Tipo documento:
Article
Natura:
Periodico
Settore Disciplinare:
Physical, Chemical & Earth Sciences
Engineering, Computing & Technology
--discip_EC--
Citazioni:
10
Recensione:
Indirizzi per estratti:
Indirizzo: Dimmick, TE Univ Bath, Sch Phys, Claverton Down, Bath BA2 7AY, Avon, England Univ Bath Claverton Down Bath Avon England BA2 7AY on, England
Citazione:
T.E. Dimmick et al., "Carbon dioxide laser fabrication of fused-fiber couplers and tapers", APPL OPTICS, 38(33), 1999, pp. 6845-6848

Abstract

We report the development of a fiber taper and fused-fiber coupler fabrication rig that uses a scanning, focused, CO2 laser beam as the heat source. As a result of the pointlike heat source and the versatility associated with scanning, tapers of any transition shape and uniform taper waist can be produced. Tapers with both a linear shape and an exponential transition shape were measured. The taper waist uniformity was measured and shown to be better than +/- 1.2%. The rig was also used to make fused-fiber couplers. Couplers with excess loss below -0.1 dB were routinely produced. (C) 1999 Optical Society of America OCIS codes: 060.2310, 060.1810, 060.2340, 220.0220, 220.4610.

ASDD Area Sistemi Dipartimentali e Documentali, Università di Bologna, Catalogo delle riviste ed altri periodici
Documento generato il 28/11/20 alle ore 22:01:02